Form: 10-K

Annual report pursuant to Section 13 and 15(d)

August 17, 2021

falseFY2021US0000943819YesYesNoYes0000943819srt:CumulativeEffectPeriodOfAdoptionAdjustmentMemberus-gaap:AccountingStandardsUpdate201613Memberus-gaap:AllowanceForCreditLossMember2020-07-012021-06-300000943819us-gaap:AllowanceForCreditLossMember2019-07-012020-06-300000943819us-gaap:AllowanceForCreditLossMember2018-07-012019-06-300000943819srt:CumulativeEffectPeriodOfAdoptionAdjustmentMemberus-gaap:AccountingStandardsUpdate201613Memberus-gaap:AllowanceForCreditLossMember2021-06-300000943819srt:CumulativeEffectPeriodOfAdoptionAdjustmentMemberus-gaap:AccountingStandardsUpdate201613Memberus-gaap:AllowanceForCreditLossMember2020-06-300000943819us-gaap:AllowanceForCreditLossMember2020-06-300000943819us-gaap:AllowanceForCreditLossMember2019-06-300000943819us-gaap:AllowanceForCreditLossMember2018-06-300000943819us-gaap:ForeignCountryMember2018-07-012019-06-3000009438192014-02-210000943819srt:CumulativeEffectPeriodOfAdoptionAdjustmentMemberus-gaap:TreasuryStockMember2021-06-300000943819srt:CumulativeEffectPeriodOfAdoptionAdjustmentMemberus-gaap:RetainedEarningsMember2021-06-300000943819srt:CumulativeEffectPeriodOfAdoptionAdjustmentMemberus-gaap:CommonStockMember2021-06-300000943819srt:CumulativeEffectPeriodOfAdoptionAdjustmentMemberus-gaap:AdditionalPaidInCapitalMember2021-06-300000943819srt:CumulativeEffectPeriodOfAdoptionAdjustmentMemberus-gaap:AccumulatedOtherComprehensiveIncomeMember2021-06-300000943819us-gaap:RetainedEarningsMember2021-06-300000943819us-gaap:AdditionalPaidInCapitalMember2021-06-300000943819us-gaap:AccumulatedOtherComprehensiveIncomeMember2021-06-300000943819srt:CumulativeEffectPeriodOfAdoptionAdjustmentMember2021-06-300000943819us-gaap:RetainedEarningsMember2020-06-300000943819us-gaap:AdditionalPaidInCapitalMember2020-06-300000943819us-gaap:AccumulatedOtherComprehensiveIncomeMember2020-06-300000943819srt:CumulativeEffectPeriodOfAdoptionAdjustmentMemberus-gaap:TreasuryStockMember2019-06-300000943819srt:CumulativeEffectPeriodOfAdoptionAdjustmentMemberus-gaap:RetainedEarningsMember2019-06-300000943819srt:CumulativeEffectPeriodOfAdoptionAdjustmentMemberus-gaap:CommonStockMember2019-06-300000943819srt:CumulativeEffectPeriodOfAdoptionAdjustmentMemberus-gaap:AdditionalPaidInCapitalMember2019-06-300000943819srt:CumulativeEffectPeriodOfAdoptionAdjustmentMemberus-gaap:AccumulatedOtherComprehensiveIncomeMember2019-06-300000943819us-gaap:RetainedEarningsMember2019-06-300000943819us-gaap:AdditionalPaidInCapitalMember2019-06-300000943819us-gaap:AccumulatedOtherComprehensiveIncomeMember2019-06-300000943819srt:CumulativeEffectPeriodOfAdoptionAdjustmentMember2019-06-300000943819us-gaap:RetainedEarningsMember2018-06-300000943819us-gaap:AdditionalPaidInCapitalMember2018-06-300000943819us-gaap:AccumulatedOtherComprehensiveIncomeMember2018-06-300000943819us-gaap:TreasuryStockMember2021-06-300000943819us-gaap:CommonStockMember2021-06-300000943819us-gaap:TreasuryStockMember2020-06-300000943819us-gaap:CommonStockMember2020-06-300000943819us-gaap:TreasuryStockMember2019-06-300000943819us-gaap:CommonStockMember2019-06-300000943819us-gaap:TreasuryStockMember2018-06-300000943819us-gaap:CommonStockMember2018-06-300000943819rmd:EmployeeStockPurchasePlanMember2021-06-300000943819rmd:ResmedInc2009IncentiveAwardPlanMember2021-06-300000943819rmd:EmployeeStockPurchasePlanPurchaseRightsMember2020-07-012021-06-300000943819us-gaap:EmployeeStockOptionMember2019-07-012020-06-300000943819rmd:EmployeeStockPurchasePlanPurchaseRightsMember2019-07-012020-06-300000943819us-gaap:EmployeeStockOptionMember2018-07-012019-06-300000943819rmd:EmployeeStockPurchasePlanPurchaseRightsMember2018-07-012019-06-300000943819srt:MinimumMemberrmd:EmployeeStockPurchasePlanPurchaseRightsMember2020-07-012021-06-300000943819srt:MaximumMemberrmd:EmployeeStockPurchasePlanPurchaseRightsMember2020-07-012021-06-300000943819us-gaap:EmployeeStockOptionMember2020-07-012021-06-300000943819srt:MinimumMemberus-gaap:EmployeeStockOptionMember2019-07-012020-06-300000943819srt:MinimumMemberrmd:EmployeeStockPurchasePlanPurchaseRightsMember2019-07-012020-06-300000943819srt:MaximumMemberrmd:EmployeeStockPurchasePlanPurchaseRightsMember2019-07-012020-06-300000943819srt:MinimumMemberus-gaap:EmployeeStockOptionMember2018-07-012019-06-300000943819srt:MinimumMemberrmd:EmployeeStockPurchasePlanPurchaseRightsMember2018-07-012019-06-300000943819srt:MaximumMemberus-gaap:EmployeeStockOptionMember2018-07-012019-06-300000943819srt:MaximumMemberrmd:EmployeeStockPurchasePlanPurchaseRightsMember2018-07-012019-06-300000943819us-gaap:RestrictedStockUnitsRSUMember2019-07-012020-06-300000943819us-gaap:RestrictedStockUnitsRSUMember2021-06-300000943819us-gaap:RestrictedStockUnitsRSUMember2020-06-300000943819us-gaap:OperatingSegmentsMemberrmd:U.s.CanadaAndLatinAmericaMemberrmd:SoftwareAsServiceMember2020-07-012021-06-300000943819us-gaap:OperatingSegmentsMemberrmd:U.s.CanadaAndLatinAmericaMemberrmd:MasksMember2020-07-012021-06-300000943819us-gaap:OperatingSegmentsMemberrmd:U.s.CanadaAndLatinAmericaMemberrmd:DevicesMember2020-07-012021-06-300000943819us-gaap:OperatingSegmentsMemberrmd:U.s.CanadaAndLatinAmericaMemberrmd:DevicesAndMasksMember2020-07-012021-06-300000943819us-gaap:OperatingSegmentsMemberrmd:GlobalMemberrmd:SoftwareAsServiceMember2020-07-012021-06-300000943819us-gaap:OperatingSegmentsMemberrmd:GlobalMemberrmd:MasksMember2020-07-012021-06-300000943819us-gaap:OperatingSegmentsMemberrmd:GlobalMemberrmd:DevicesMember2020-07-012021-06-300000943819us-gaap:OperatingSegmentsMemberrmd:GlobalMemberrmd:DevicesAndMasksMember2020-07-012021-06-300000943819us-gaap:OperatingSegmentsMemberrmd:CombinedEuropeAsiaAndOtherMarketsMemberrmd:MasksMember2020-07-012021-06-300000943819us-gaap:OperatingSegmentsMemberrmd:CombinedEuropeAsiaAndOtherMarketsMemberrmd:DevicesMember2020-07-012021-06-300000943819us-gaap:OperatingSegmentsMemberrmd:CombinedEuropeAsiaAndOtherMarketsMemberrmd:DevicesAndMasksMember2020-07-012021-06-300000943819us-gaap:OperatingSegmentsMemberrmd:SoftwareAsServiceBeforeDeferredRevenueAdjustmentMember2020-07-012021-06-300000943819rmd:U.s.CanadaAndLatinAmericaMember2020-07-012021-06-300000943819rmd:RestOfWorldMember2020-07-012021-06-300000943819rmd:GlobalMember2020-07-012021-06-300000943819country:US2020-07-012021-06-300000943819us-gaap:OperatingSegmentsMemberrmd:U.s.CanadaAndLatinAmericaMemberrmd:SoftwareAsServiceMember2019-07-012020-06-300000943819us-gaap:OperatingSegmentsMemberrmd:U.s.CanadaAndLatinAmericaMemberrmd:MasksMember2019-07-012020-06-300000943819us-gaap:OperatingSegmentsMemberrmd:U.s.CanadaAndLatinAmericaMemberrmd:DevicesMember2019-07-012020-06-300000943819us-gaap:OperatingSegmentsMemberrmd:U.s.CanadaAndLatinAmericaMemberrmd:DevicesAndMasksMember2019-07-012020-06-300000943819us-gaap:OperatingSegmentsMemberrmd:GlobalMemberrmd:SoftwareAsServiceMember2019-07-012020-06-300000943819us-gaap:OperatingSegmentsMemberrmd:GlobalMemberrmd:MasksMember2019-07-012020-06-300000943819us-gaap:OperatingSegmentsMemberrmd:GlobalMemberrmd:DevicesMember2019-07-012020-06-300000943819us-gaap:OperatingSegmentsMemberrmd:GlobalMemberrmd:DevicesAndMasksMember2019-07-012020-06-300000943819us-gaap:OperatingSegmentsMemberrmd:CombinedEuropeAsiaAndOtherMarketsMemberrmd:MasksMember2019-07-012020-06-300000943819us-gaap:OperatingSegmentsMemberrmd:CombinedEuropeAsiaAndOtherMarketsMemberrmd:DevicesMember2019-07-012020-06-300000943819us-gaap:OperatingSegmentsMemberrmd:CombinedEuropeAsiaAndOtherMarketsMemberrmd:DevicesAndMasksMember2019-07-012020-06-300000943819us-gaap:OperatingSegmentsMemberrmd:SoftwareAsServiceBeforeDeferredRevenueAdjustmentMember2019-07-012020-06-300000943819rmd:U.s.CanadaAndLatinAmericaMember2019-07-012020-06-300000943819rmd:RestOfWorldMember2019-07-012020-06-300000943819rmd:GlobalMember2019-07-012020-06-300000943819country:US2019-07-012020-06-300000943819us-gaap:OperatingSegmentsMemberrmd:U.s.CanadaAndLatinAmericaMemberrmd:SoftwareAsServiceMember2018-07-012019-06-300000943819us-gaap:OperatingSegmentsMemberrmd:U.s.CanadaAndLatinAmericaMemberrmd:MasksMember2018-07-012019-06-300000943819us-gaap:OperatingSegmentsMemberrmd:U.s.CanadaAndLatinAmericaMemberrmd:DevicesMember2018-07-012019-06-300000943819us-gaap:OperatingSegmentsMemberrmd:U.s.CanadaAndLatinAmericaMemberrmd:DevicesAndMasksMember2018-07-012019-06-300000943819us-gaap:OperatingSegmentsMemberrmd:GlobalMemberrmd:SoftwareAsServiceMember2018-07-012019-06-300000943819us-gaap:OperatingSegmentsMemberrmd:GlobalMemberrmd:MasksMember2018-07-012019-06-300000943819us-gaap:OperatingSegmentsMemberrmd:GlobalMemberrmd:DevicesMember2018-07-012019-06-300000943819us-gaap:OperatingSegmentsMemberrmd:GlobalMemberrmd:DevicesAndMasksMember2018-07-012019-06-300000943819us-gaap:OperatingSegmentsMemberrmd:CombinedEuropeAsiaAndOtherMarketsMemberrmd:MasksMember2018-07-012019-06-300000943819us-gaap:OperatingSegmentsMemberrmd:CombinedEuropeAsiaAndOtherMarketsMemberrmd:DevicesMember2018-07-012019-06-300000943819us-gaap:OperatingSegmentsMemberrmd:CombinedEuropeAsiaAndOtherMarketsMemberrmd:DevicesAndMasksMember2018-07-012019-06-300000943819us-gaap:OperatingSegmentsMemberrmd:SoftwareAsServiceBeforeDeferredRevenueAdjustmentMember2018-07-012019-06-300000943819rmd:U.s.CanadaAndLatinAmericaMember2018-07-012019-06-300000943819rmd:RestOfWorldMember2018-07-012019-06-300000943819rmd:GlobalMember2018-07-012019-06-300000943819country:US2018-07-012019-06-300000943819rmd:ReorganizationRationalizationAndRelocationOfRDAndSaasOperationsMember2018-07-012019-06-300000943819us-gaap:BuildingMember2020-07-012021-06-300000943819us-gaap:VehiclesMember2021-06-300000943819us-gaap:MachineryAndEquipmentMember2021-06-300000943819us-gaap:LeaseholdImprovementsMember2021-06-300000943819us-gaap:LandMember2021-06-300000943819us-gaap:FurnitureAndFixturesMember2021-06-300000943819us-gaap:ComputerEquipmentMember2021-06-300000943819us-gaap:BuildingMember2021-06-300000943819rmd:ClinicalDemonstrationAndRentalEquipmentMember2021-06-300000943819us-gaap:VehiclesMember2020-06-300000943819us-gaap:MachineryAndEquipmentMember2020-06-300000943819us-gaap:LeaseholdImprovementsMember2020-06-300000943819us-gaap:LandMember2020-06-300000943819us-gaap:FurnitureAndFixturesMember2020-06-300000943819us-gaap:ComputerEquipmentMember2020-06-300000943819us-gaap:BuildingMember2020-06-300000943819rmd:ClinicalDemonstrationAndRentalEquipmentMember2020-06-3000009438191997-04-300000943819us-gaap:ForeignCountryMember2021-06-300000943819us-gaap:OperatingSegmentsMember2020-07-012021-06-300000943819us-gaap:OperatingSegmentsMember2019-07-012020-06-300000943819us-gaap:OperatingSegmentsMember2018-07-012019-06-300000943819rmd:RestOfWorldMember2020-06-300000943819country:US2020-06-300000943819country:SG2020-06-300000943819country:AU2020-06-300000943819rmd:RestOfWorldMember2019-06-300000943819country:US2019-06-300000943819country:SG2019-06-300000943819country:AU2019-06-300000943819rmd:RevolvingCreditFacilityAndTermLoanCreditAgreementMember2020-06-300000943819us-gaap:SeniorNotesMember2021-06-3000009438192017-07-012020-06-300000943819rmd:RevolvingCreditFacilityAndTermLoanCreditAgreementMember2020-07-012021-06-300000943819us-gaap:RevolvingCreditFacilityMemberrmd:MufgUnionBankNaAndWestpacBankingCorporationMember2018-11-050000943819us-gaap:RevolvingCreditFacilityMemberrmd:MufgUnionBankNaAndWestpacBankingCorporationMember2018-11-040000943819rmd:ResmedLimitedMemberrmd:RevolvingCreditFacilityAndTermLoanCreditAgreementMemberrmd:MufgUnionBankMember2018-04-170000943819us-gaap:RevolvingCreditFacilityMemberrmd:MufgUnionBankNaAndWestpacBankingCorporationMember2018-04-170000943819rmd:RevolvingCreditFacilityAndTermLoanCreditAgreementMember2021-06-300000943819srt:MinimumMemberus-gaap:RevolvingCreditFacilityMemberrmd:MufgUnionBankNaAndWestpacBankingCorporationMember2020-07-012021-06-300000943819srt:MaximumMemberus-gaap:RevolvingCreditFacilityMemberrmd:MufgUnionBankNaAndWestpacBankingCorporationMember2020-07-012021-06-300000943819srt:MinimumMember2021-06-300000943819srt:MaximumMember2021-06-300000943819us-gaap:AustralianTaxationOfficeMemberrmd:TaxYears2009To2013Member2021-06-300000943819us-gaap:AustralianTaxationOfficeMemberrmd:TaxYears2009To2013Member2020-07-012021-06-300000943819rmd:SleepAndRespiratoryMember2020-07-012021-06-300000943819rmd:SaasMember2020-07-012021-06-300000943819rmd:SleepAndRespiratoryMember2021-06-300000943819rmd:SaasMember2021-06-300000943819rmd:SleepAndRespiratoryMember2020-06-300000943819rmd:SaasMember2020-06-300000943819us-gaap:OtherIntangibleAssetsMember2021-06-300000943819us-gaap:CustomerRelationshipsMember2021-06-300000943819rmd:DevelopedOrCoreProductTechnologyMember2021-06-300000943819us-gaap:OtherIntangibleAssetsMember2020-06-300000943819us-gaap:CustomerRelationshipsMember2020-06-300000943819rmd:DevelopedOrCoreProductTechnologyMember2020-06-300000943819rmd:ReorganizationRationalizationAndRelocationOfRDAndSaasOperationsMember2019-06-300000943819us-gaap:TreasuryStockMember2020-07-012021-06-300000943819us-gaap:RetainedEarningsMember2020-07-012021-06-300000943819us-gaap:CommonStockMember2020-07-012021-06-300000943819us-gaap:AdditionalPaidInCapitalMember2020-07-012021-06-300000943819us-gaap:AccumulatedOtherComprehensiveIncomeMember2020-07-012021-06-300000943819us-gaap:TreasuryStockMember2019-07-012020-06-300000943819us-gaap:RetainedEarningsMember2019-07-012020-06-300000943819us-gaap:CommonStockMember2019-07-012020-06-300000943819us-gaap:AdditionalPaidInCapitalMember2019-07-012020-06-300000943819us-gaap:AccumulatedOtherComprehensiveIncomeMember2019-07-012020-06-300000943819us-gaap:TreasuryStockMember2018-07-012019-06-300000943819us-gaap:RetainedEarningsMember2018-07-012019-06-300000943819us-gaap:CommonStockMember2018-07-012019-06-300000943819us-gaap:AdditionalPaidInCapitalMember2018-07-012019-06-300000943819us-gaap:AccumulatedOtherComprehensiveIncomeMember2018-07-012019-06-300000943819us-gaap:OperatingSegmentsMemberrmd:SoftwareAsServiceMember2020-07-012021-06-300000943819us-gaap:OperatingSegmentsMemberrmd:DevicesAndMasksMember2020-07-012021-06-300000943819us-gaap:CorporateNonSegmentMember2020-07-012021-06-300000943819us-gaap:OperatingSegmentsMemberrmd:SoftwareAsServiceMember2019-07-012020-06-300000943819us-gaap:OperatingSegmentsMemberrmd:DevicesAndMasksMember2019-07-012020-06-300000943819us-gaap:CorporateNonSegmentMember2019-07-012020-06-300000943819us-gaap:OperatingSegmentsMemberrmd:SoftwareAsServiceMember2018-07-012019-06-300000943819us-gaap:OperatingSegmentsMemberrmd:DevicesAndMasksMember2018-07-012019-06-300000943819us-gaap:CorporateNonSegmentMember2018-07-012019-06-300000943819rmd:SingaporePlanMemberus-gaap:ForeignPlanMember2019-07-012020-06-300000943819rmd:AustraliaPlanMemberus-gaap:ForeignPlanMember2019-07-012020-06-300000943819rmd:UnitedStatesPlanMember2019-07-012020-06-300000943819rmd:SingaporePlanMemberus-gaap:ForeignPlanMember2018-07-012019-06-300000943819rmd:AustraliaPlanMemberus-gaap:ForeignPlanMember2018-07-012019-06-300000943819rmd:UnitedStatesPlanMember2018-07-012019-06-300000943819us-gaap:DomesticCountryMember2021-06-300000943819rmd:ExtraordinaryDispositionsMember2021-06-300000943819rmd:RevolvingCreditAgreementTermCreditAgreementAndSeniorNotesMember2021-06-300000943819rmd:SeniorNotesTwoMember2021-06-300000943819rmd:SeniorNotesOneMember2021-06-300000943819rmd:RevolvingCreditFacilityAndTermLoanCreditAgreementMemberrmd:MufgUnionBankNaAndWestpacBankingCorporationMember2021-06-300000943819rmd:SeniorNotesTwoMember2019-07-100000943819rmd:SeniorNotesOneMember2019-07-100000943819srt:MinimumMemberrmd:RevolvingCreditFacilityAndTermLoanCreditAgreementMemberus-gaap:LondonInterbankOfferedRateLIBORMember2020-07-012021-06-300000943819srt:MinimumMemberrmd:RevolvingCreditFacilityAndTermLoanCreditAgreementMemberus-gaap:BaseRateMember2020-07-012021-06-300000943819srt:MaximumMemberrmd:RevolvingCreditFacilityAndTermLoanCreditAgreementMemberus-gaap:LondonInterbankOfferedRateLIBORMember2020-07-012021-06-300000943819srt:MaximumMemberrmd:RevolvingCreditFacilityAndTermLoanCreditAgreementMemberus-gaap:BaseRateMember2020-07-012021-06-300000943819rmd:PrepaidTaxesAndOtherNonCurrentAssetsMember2021-06-300000943819rmd:PrepaidTaxesAndOtherNonCurrentAssetsMember2020-06-300000943819srt:MaximumMemberrmd:EmployeeStockPurchasePlanMember2021-06-3000009438192018-06-300000943819rmd:ExcludingImpactOfFairValuePurchasePriceAdjustmentToDeferredRevenueMemberrmd:MatrixcareMember2019-07-012020-06-300000943819rmd:MatrixcareMember2019-07-012020-06-300000943819rmd:MatrixcareMember2018-11-132018-11-130000943819srt:ProFormaMember2019-07-012020-06-300000943819rmd:MatrixcareMember2018-07-012019-06-300000943819rmd:MatrixcareMember2018-11-130000943819us-gaap:PatentsMember2020-07-012021-06-300000943819rmd:SoftwareAsServiceMember2020-07-012021-06-300000943819rmd:SleepAndRespiratoryMember2020-07-012021-06-300000943819rmd:IdentifiedIntangibleAssetsMember2020-07-012021-06-300000943819srt:ProFormaMemberrmd:MatrixcareMember2019-07-012020-06-300000943819us-gaap:PatentsMember2019-07-012020-06-300000943819rmd:SoftwareAsServiceMember2019-07-012020-06-300000943819rmd:SleepAndRespiratoryMember2019-07-012020-06-300000943819rmd:IdentifiedIntangibleAssetsMember2019-07-012020-06-300000943819rmd:SoftwareAsServiceMember2018-07-012019-06-300000943819rmd:SleepAndRespiratoryMember2018-07-012019-06-300000943819us-gaap:ResearchAndDevelopmentExpenseMember2020-07-012021-06-300000943819us-gaap:GeneralAndAdministrativeExpenseMember2020-07-012021-06-300000943819us-gaap:CostOfSalesMember2020-07-012021-06-300000943819us-gaap:ResearchAndDevelopmentExpenseMember2019-07-012020-06-300000943819us-gaap:GeneralAndAdministrativeExpenseMember2019-07-012020-06-300000943819us-gaap:CostOfSalesMember2019-07-012020-06-300000943819rmd:EmployeeStockPurchasePlanMember2019-07-012020-06-300000943819us-gaap:ResearchAndDevelopmentExpenseMember2018-07-012019-06-300000943819us-gaap:GeneralAndAdministrativeExpenseMember2018-07-012019-06-300000943819us-gaap:CostOfSalesMember2018-07-012019-06-300000943819rmd:EmployeeStockPurchasePlanMember2018-07-012019-06-300000943819rmd:AccountsReceivableNetMember2021-06-300000943819rmd:AccountsReceivableNetMember2020-06-300000943819us-gaap:PerformanceSharesMember2020-07-012021-06-300000943819us-gaap:RevolvingCreditFacilityMemberrmd:MufgUnionBankNaAndWestpacBankingCorporationMember2018-11-052018-11-050000943819us-gaap:RevolvingCreditFacilityMemberrmd:MufgUnionBankNaAndWestpacBankingCorporationMember2018-04-172018-04-170000943819srt:MinimumMember2020-07-012021-06-300000943819srt:MaximumMember2020-07-012021-06-300000943819rmd:AmendedAndRestated2009PlanMember2017-11-302017-11-300000943819rmd:AmendedAndRestated2009PlanMember2017-11-012017-11-300000943819srt:BoardOfDirectorsChairmanMemberrmd:AmendedAndRestated2009PlanMember2017-11-012017-11-300000943819rmd:NonEmployeeDirectorMemberrmd:AmendedAndRestated2009PlanMember2017-11-012017-11-300000943819rmd:ResmedInc2009IncentiveAwardPlanMember2017-11-300000943819rmd:ResmedInc2009IncentiveAwardPlanMember2017-11-012017-11-300000943819us-gaap:RestrictedStockUnitsRSUMember2020-07-012021-06-300000943819rmd:PortableOxygenConcentratorBusinessClosureMember2020-07-012021-06-300000943819us-gaap:AustralianTaxationOfficeMember2020-07-012021-06-300000943819rmd:EmployeeStockPurchasePlanMember2020-07-012021-06-300000943819us-gaap:ForeignCountryMemberus-gaap:ValuationAllowanceOperatingLossCarryforwardsMember2021-06-300000943819us-gaap:EquityMethodInvestmentsMember2021-06-300000943819rmd:NonMarketableSecuritiesMember2021-06-300000943819rmd:MarketableSecuritiesMember2021-06-300000943819us-gaap:EquityMethodInvestmentsMember2020-06-300000943819rmd:NonMarketableSecuritiesMember2020-06-300000943819rmd:MarketableSecuritiesMember2020-06-300000943819us-gaap:EquityMethodInvestmentsMember2019-06-300000943819rmd:NonMarketableSecuritiesMember2019-06-300000943819rmd:MarketableSecuritiesMember2019-06-3000009438192019-06-300000943819srt:MinimumMemberrmd:EmployeeStockPurchasePlanMember2020-07-012021-06-300000943819srt:MaximumMemberrmd:EmployeeStockPurchasePlanMember2020-07-012021-06-300000943819rmd:SingaporePlanMemberus-gaap:ForeignPlanMember2020-07-012021-06-300000943819rmd:AustraliaPlanMemberus-gaap:ForeignPlanMember2020-07-012021-06-300000943819rmd:UnitedStatesPlanMember2020-07-012021-06-300000943819rmd:MatrixcareMember2020-07-012021-06-300000943819rmd:SoftwareAsServiceMember2019-07-012020-06-300000943819rmd:SoftwareAsServiceMember2018-07-012019-06-300000943819us-gaap:MaterialReconcilingItemsMember2020-07-012021-06-300000943819us-gaap:MaterialReconcilingItemsMember2019-07-012020-06-300000943819us-gaap:MaterialReconcilingItemsMember2018-07-012019-06-300000943819us-gaap:EquityMethodInvestmentsMember2020-07-012021-06-300000943819rmd:NonMarketableSecuritiesMember2020-07-012021-06-300000943819rmd:MarketableSecuritiesMember2020-07-012021-06-300000943819us-gaap:EquityMethodInvestmentsMember2019-07-012020-06-300000943819rmd:NonMarketableSecuritiesMember2019-07-012020-06-300000943819rmd:MarketableSecuritiesMember2019-07-012020-06-3000009438192019-07-012020-06-3000009438192018-07-012019-06-3000009438192021-06-3000009438192020-06-3000009438192020-12-3100009438192021-08-1200009438192020-07-012021-06-30rmd:segmentiso4217:USDxbrli:sharesrmd:itemxbrli:pureiso4217:USDxbrli:shares

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

______________________________________________________________________________________________

FORM 10-K

______________________________________________________________________________________________

[X] ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended June 30, 2021

Commission file number: 001-15317

______________________________________________________________________________________________

ResMed Inc.

(Exact name of registrant as specified in its charter)

______________________________________________________________________________________________

Delaware

(State or other jurisdiction of incorporation or organization)

98-0152841

(IRS Employer Identification No.)

9001 Spectrum Center Blvd.

San Diego, CA 92123

United States of America

(Address of principal executive offices)

(858) 836-5000

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

Title of each class

Trading

Symbol(s)

Name of each exchange on which registered

Common Stock, par value $0.004 per share

RMD

New York Stock Exchange

Securities registered pursuant to Section 12(g) of the Act

None

______________________________________________________________________________________________

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.     Yes  x    No   ¨

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act.     Yes  ¨    No   x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.     Yes  x    No   ¨

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).     Yes  x    No   ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act. 

Large Accelerated Filer

x

Accelerated Filer

¨

Non-accelerated Filer

¨

Smaller Reporting Company

¨

Emerging Growth Company

¨

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.     ¨

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report.     x

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).     Yes  ¨    No   x

The aggregate market value of the voting and non-voting common equity held by non-affiliates of registrant as of December 31, 2020 (the last business day of the registrant’s most recently completed second fiscal quarter), computed by reference to the closing sale price of such stock on the New York Stock Exchange, was $30,662,112,869. All directors, executive officers, and 10% stockholders of registrant are considered affiliates.

At August 12, 2021, registrant had 145,681,186 shares of Common Stock, $0.004 par value, issued and outstanding. This number excludes 41,836,234 shares held by the registrant as treasury shares.

Portions of the registrant’s definitive Proxy Statement to be delivered to stockholders in connection with the registrant’s 2021 Annual Meeting of Stockholders, to be filed subsequent to the date hereof, are incorporated by reference into Part III of this report.


TABLE OF CONTENTS

 

Cautionary Note Regarding Forward Looking Statements

1

Part I

Item 1

Business

1

 

Item 1A

Risk Factors

21

Item 1B

Unresolved Staff Comments

39

 

Item 2

Properties

39

 

Item 3

Legal Proceedings

39

 

Item 4

Mine Safety Disclosures

39

Part II

Item 5

Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

40

 

Item 6

Selected Financial Data

42

 

Item 7

Management’s Discussion and Analysis of Financial Condition and Results of Operations

43

 

Item 7A

Quantitative and Qualitative Disclosures About Market and Business Risks

54

 

Item 8

Consolidated Financial Statements and Supplementary Data

56

 

Item 9

Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

86

 

Item 9A

Controls and Procedures

86

 

Item 9B

Other Information

89

Part III

Item 10

Directors, Executive Officers and Corporate Governance

90

 

Item 11

Executive Compensation

90

 

Item 12

Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

90

 

Item 13

Certain Relationships and Related Transactions, and Director Independence

90

 

Item 14

Principal Accounting Fees and Services

90

Part IV

Item 15

Exhibits and Consolidated Financial Statement Schedules

91

Item 16

Form 10-K Summary

92

 

 

Signatures

93

As used in this 10-K, the terms “we”, “us”, “our” and “the Company” refer to ResMed Inc., a Delaware corporation, and its subsidiaries, on a consolidated basis, unless otherwise stated.

 


Table of Contents

 

PART I

Item 1

 

RESMED INC. AND SUBSIDIARIES

 

PART I

Cautionary Note Regarding Forward-Looking Statements

This report contains or may contain certain forward-looking statements and information that are based on the beliefs of our management as well as estimates and assumptions made by, and information currently available to, our management. All statements other than statements regarding historical facts are forward-looking statements. The words “believe,” “expect,” “intend,” “anticipate,” “will continue,” “will,” “estimate,” “plan,” “future” and other similar expressions, and negative statements of such expressions, generally identify forward-looking statements, including, in particular, statements regarding expectations of future revenue or earnings, expenses, new product development, new product launches, new markets for our products, litigation, and tax outlook. These forward-looking statements are made in accordance with the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. You are cautioned not to place undue reliance on these forward-looking statements. Forward-looking statements reflect the views of our management at the time the statements are made and are subject to a number of risks, uncertainties, estimates and assumptions, including, without limitation, and in addition to those identified in the text surrounding such statements, those identified in Item 1A “Risk Factors” and elsewhere in this report.

In addition, important factors to consider in evaluating such forward-looking statements include changes or developments in healthcare reform, social, economic, market, legal or regulatory circumstances, including the impact of public health crises such as the novel strain of coronavirus (COVID-19) that has spread globally; changes in our business or growth strategy or an inability to execute our strategy due to changes in our industry or the economy generally, the emergence of new or growing competitors, the actions or omissions of third parties, including suppliers, customers, competitors and governmental authorities, and various other factors. If any one or more of these risks or uncertainties materialize, or underlying estimates or assumptions prove incorrect, actual results may vary significantly from those expressed in our forward-looking statements, and there can be no assurance that the forward-looking statements contained in this report will in fact occur.

 

ITEM 1  BUSINESS

General

We are a global leader in digital health and cloud-connected medical devices. We design innovative solutions to treat and keep people out of the hospital, empowering them to live healthier, higher-quality lives. Our digital health technologies and cloud-connected medical devices transform care for people with sleep apnea, chronic obstructive pulmonary disease, or COPD, and other chronic diseases. Our comprehensive out-of-hospital software platforms support the professionals and caregivers who help people stay healthy in the home or care setting of their choice. By enabling better care, our products improve quality of life, reduce the impact of chronic disease, and lower costs for consumers and healthcare systems.

Following our formation in 1989, we commercialized a treatment for obstructive sleep apnea, or OSA. This treatment, nasal continuous positive airway pressure, or CPAP, was the first successful noninvasive treatment for OSA. CPAP systems deliver pressurized air, typically through a nasal mask, to prevent collapse of the upper airway during sleep.

Since the development of CPAP, we have expanded our business by developing or acquiring a number of innovative products and solutions for a broad range of respiratory disorders including technologies to be applied in medical and consumer products, ventilation devices, diagnostic products, mask systems for use in the hospital and home, headgear and other accessories, and dental devices. We offer a comprehensive digital solution suite for patients with COPD or asthma, including those using inhalers, as well as non-invasive or invasive ventilation. In addition, we are a leading provider of cloud-based software health applications and devices designed to provide connected care, enabling clinicians to manage more patients efficiently and effectively, as well as enabling and encouraging patients’ long-term adherence to and satisfaction with their therapy. We also provide management software to agencies providing out-of-hospital care, including home medical equipment, or HME, home health and hospice, skilled nursing, life plan community, senior living, and private duty services.

We employ approximately 8,000 people and sell our products in over 140 countries through a combination of wholly owned subsidiaries and independent distributors.

Our web site address is www.resmed.com. Information contained on our website is not part of or incorporated into this report. We make our periodic reports, together with any amendments, available on our website, free of charge, as soon as reasonably practicable after we electronically file or furnish the reports with the Securities and Exchange Commission, or SEC. The SEC maintains an internet site, www.sec.gov, which contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC.

 

-1-


Table of Contents

 

PART I

Item 1

 

RESMED INC. AND SUBSIDIARIES

 

Corporate History

Our Australian subsidiary, ResMed Holdings Limited, was originally organized in 1989 by Dr. Peter Farrell to acquire from Baxter Center for Medical Research Pty Limited, or Baxter, the rights to certain technology relating to CPAP treatment as well as Baxter’s existing CPAP device business. Baxter acquired the rights to the technology in 1987 and sold CPAP devices in Australia from 1988 until our acquisition of the business.

ResMed Inc., a Delaware corporation, was formed in March 1994 as the ultimate holding company for our operating subsidiaries. In June 1995, we completed an initial public offering of common stock and our common stock began trading on the NASDAQ National Market. In September 1999, we transferred our principal listing to the New York Stock Exchange, or NYSE, trading under the ticker symbol “RMD”. In November 1999, we established a secondary listing of our common stock via Chess Depositary Instruments, or CDIs, on the Australian Stock Exchange (now known as the Australian Securities Exchange), or ASX, also under the symbol “RMD”. Ten CDIs on the ASX represent one share of our common stock on the NYSE.

Since formation we have acquired a number of businesses, including distributors, suppliers, developers of medical equipment and related technologies and software solution providers.

Segment Information

We operate in two segments, which are the Sleep and Respiratory Care segment and the Software as a Service, or SaaS, segment. See Note 15 – Segment Information of the Notes to Financial Statements (Part II, Item 8) for financial information regarding segment reporting. Financial information about our revenues from and assets located in foreign countries is also included in the notes to our consolidated financial statements.

The Market

We are focused on the sleep and related respiratory care markets, both of which we believe are globally underpenetrated markets, and where we believe our products can improve patient outcomes, create efficiencies for our customers, help physicians and providers better manage chronic disease and reduce overall healthcare system costs. Additionally, our software solutions are focused on the out-of-hospital care market, which we believe is fragmented and underserved and where we see significant opportunity to transform and significantly improve out-of-hospital healthcare through a strategy of enabling better patient care, improving clinical decision support, and driving interoperability across out-of-hospital care settings.

Sleep and Respiratory Care

Sleep

Sleep is a complex neurological process that includes two distinct states: rapid eye movement, or REM, sleep and non-rapid eye movement, or non-REM, sleep. REM sleep, which is about 20-25% of total sleep experienced by adults, is characterized by a high level of brain activity, bursts of rapid eye movement, increased heart and respiration rates, and paralysis of many muscles. Non-REM sleep is subdivided into four stages that generally parallel sleep depth; stage 1 is the lightest and stage 4 is the deepest.

The upper airway has no rigid support and is held open by active contraction of upper airway muscles. Normally, during REM sleep and deeper levels of non-REM sleep, upper airway muscles relax and the airway narrows. Individuals with narrow upper airways or poor muscle tone are prone to temporary collapses of the upper airway during sleep, called apneas, and to near closures of the upper airway called hypopneas. These breathing events result in a lowering of blood oxygen concentration, causing the central nervous system to react to the lack of oxygen or increased carbon dioxide and signaling the body to respond. Typically, the individual subconsciously arouses from sleep, causing the throat muscles to contract, opening the airway. After a few gasping breaths, blood oxygen levels increase and the individual can resume a deeper sleep until the cycle repeats itself. Sufferers of OSA typically experience ten or more such cycles per hour. While these awakenings greatly impair the quality of sleep, the individual is not normally aware of these disruptions. In addition, OSA has been recognized as a cause of hypertension and a significant comorbidity for heart disease, stroke and diabetes.

 

-2-


Table of Contents

 

PART I

Item 1

 

RESMED INC. AND SUBSIDIARIES

 

A long-term epidemiology study published in 2013 estimated that 26% of adults age 30-70 have some form of obstructive sleep apnea. Another study published in Lancet Respiratory in 2019 estimated that mild to severe OSA impacts more than 936 million people worldwide, including 54 million Americans. Of those impacted, it was estimated that more than 424 million would have moderate to severe sleep apnea. Despite the high prevalence of OSA, there is a general lack of awareness of OSA among both the medical community and the general public. It is estimated that less than 20% of those with OSA have been diagnosed or treated. Many healthcare professionals are often unable to diagnose OSA because they are unaware that such non-specific symptoms as excessive daytime sleepiness, snoring, hypertension, and irritability are characteristic of OSA.

While sleep apnea has been diagnosed in a broad cross-section of the population, until recently, it has typically been diagnosed among middle-aged men who are obese. However, we believe the importance of sleep apnea in women is increasingly being recognized, with nearly 40% of new PAP patients being female. A strong association has been discovered between sleep apnea and a number of cardiovascular and metabolic diseases. Studies have shown that sleep apnea is present in approximately 83% of patients with drug-resistant hypertension, approximately 77% of patients with obesity, approximately 76% of patients with chronic heart failure and approximately 72% of patients with type 2 diabetes.

Sleep-Disordered Breathing and Obstructive Sleep Apnea.    Sleep-disordered breathing, or SDB, encompasses all disease processes that cause abnormal breathing patterns during sleep. Manifestations include OSA, central sleep apnea, or CSA, and hypoventilation syndromes that occur during sleep. Hypoventilation syndromes are generally associated with obesity, chronic obstructive lung disease and neuromuscular disease. OSA is the most common form of SDB.

Sleep fragmentation and the loss of the deeper levels of sleep caused by OSA can lead to excessive daytime sleepiness, reduced cognitive function, including memory loss and lack of concentration, depression and irritability. OSA sufferers also experience an increase in heart rate and an elevation of blood pressure during the cycle of apneas. Several studies indicate that the oxygen desaturation, increased heart rate and elevated blood pressure caused by OSA may be associated with increased risk of cardiovascular morbidity and mortality due to angina, stroke and heart attack. Patients with OSA have been shown to have impaired daytime performance in a variety of cognitive functions including problem solving, response speed and visual motor coordination, and studies have linked OSA to increased occurrences of traffic and workplace accidents.

Generally, an individual seeking treatment for the symptoms of OSA is referred by a general practitioner to a sleep specialist for further evaluation. The diagnosis of OSA typically requires monitoring the patient during sleep at either a sleep clinic or the patient’s home. During overnight testing, respiratory parameters and sleep patterns may be monitored, along with other vital signs such as heart rate and blood oxygen levels. Simpler tests, using devices such as our ApneaLink Air, or our automatic positive airway pressure devices, monitor airflow during sleep, and use computer programs to analyze airflow patterns. These tests allow sleep clinicians to detect any sleep disturbances such as apneas, hypopneas or subconscious awakenings.

Before 1981, the primary treatment for OSA was a tracheotomy, a surgical procedure to create a hole in the patient’s windpipe. Alternative surgical treatments have involved either uvulopalatopharyngoplasty, or UPPP, in which surgery is performed on the upper airway to remove excess tissue and to streamline the shape of the airway or implanting a device to add support to the soft palate. UPPP alone has a poor success rate; however, when performed in conjunction with multi-stage upper airway surgical procedures, a greater success rate has been claimed. These combined procedures, performed by highly specialized surgeons, are expensive and involve prolonged and often painful recovery periods. Surgical treatments are not considered first line therapy for OSA. Other alternative treatments available today include nasal surgery, mandibular advancement surgery, dental appliances, palatal implants, somnoplasty, nasal devices and electrical stimulation of the nerves or muscles. Alternative pharmaceutical therapy treatments are reported to be under development.

A variety of devices are marketed for the treatment of OSA. Most are only partially effective, but CPAP is a reliable treatment for all severities of OSA and is considered first-line therapy. Use of mandibular advancement devices is increasing as a second-line option in patients unable to use CPAP or those with mild OSA. These devices cause the mandible and tongue to be pulled forward and improve the dimensions of the upper airway. CPAP is a non-invasive means of treating OSA. CPAP was first used as a treatment for OSA in 1980 by Dr. Colin Sullivan, the past Chairman of our Medical Advisory Board and was commercialized for treatment of OSA in the United States, or U.S., in the mid-1980s. During CPAP treatment, a patient sleeps with a nasal interface connected to a small portable air device that delivers room air at a positive pressure. The patient breathes in air from the device and breathes out through an exhaust port in the interface. Continuous air pressure applied in this manner acts as a pneumatic splint to keep the upper airway open and unobstructed. Interfaces include nasal masks and nasal pillows. Sometimes, when a patient leaks air through their mouth, a full-face mask may need to be used, rather than a nasal interface.

 

-3-


Table of Contents

 

PART I

Item 1

 

RESMED INC. AND SUBSIDIARIES

 

CPAP is not a cure and, therefore, must be used on a nightly basis as long as treatment is required. Patient compliance has been a major factor in the efficacy of CPAP treatment. Early generations of CPAP units provided limited patient comfort and convenience. Patients experienced soreness from the repeated use of nasal masks and had difficulty falling asleep with the CPAP device operating at the prescribed pressure. In more recent years, product innovations to improve patient comfort and compliance have been developed. These include more comfortable patient interface systems; delay timers that gradually raise air pressure allowing the patient to fall asleep more easily; bilevel air devices, including our AirCurve 10 Series and Lumis devices, which provide different air pressures for inhalation and exhalation; heated humidification systems to make the airflow more comfortable; and autotitration devices that modulate the average pressure delivered during the night.

Respiratory Care

Our aim is to provide respiratory care solutions to patients with COPD, asthma, and other chronic respiratory diseases, such as overlap syndrome, obesity hypoventilation syndrome, or OHS, and neuromuscular disease, including amyotrophic lateral sclerosis, or ALS. We aim to improve their quality of life, slow down disease progression and reduce the costs of patient management.

Our products cover patients ranging from those who only require therapy from CPAP systems at night to those who are dependent on non-invasive or invasive ventilation for life-support. Our devices are predominantly used in the home and, to a lesser extent, in general hospital wards and respiratory wards. We supply CPAP and bilevel device systems, non-invasive and invasive ventilators, humidifiers and accessories, including masks and tubing. We also provide data management systems designed to improve the management of patients.

In March 2020, the World Health Organization declared the outbreak of a novel strain of coronavirus, COVID-19, as a pandemic. We have observed increased demand for our ventilator devices and masks, and during the first six months of the pandemic worked closely with governments, health authorities, hospitals, and physicians in over 100 countries to assess their needs and deliver the ventilation therapy that is essential to treat the respiratory complications of COVID-19. Our primary focus with regards to the pandemic remains preservation of life; our strategy is to maximize the availability of ResMed ventilators and other respiratory support devices for the patients that need them most. Between January 1 and June 30, 2020, ResMed produced over 150,000 ventilators –3.5 times more than the same period of time one year before.

Chronic Obstructive Pulmonary Disease.    COPD encompasses a group of lung diseases defined by persistent airflow limitation, prolongation of exhalation and loss of elasticity in the lungs. It is a progressive and debilitating disease and is associated with an increased inflammatory response in the airways. Symptoms encountered with COPD include shortness of breath as well as chronic cough and increased sputum production. COPD includes diseases such as emphysema and chronic bronchitis. A recent study based on recent epidemiology data estimates that there are over 380 million people worldwide who suffer from COPD, the world’s third leading cause of death.

Patients with COPD can have different clinical presentations. Patients with chronic bronchitis present with low level of oxygen (hypoxemia) and elevated levels of carbon dioxide (hypercapnia), a chronic productive cough, cor pulmonale and are commonly overweight. Patients with emphysema have more normal blood gases, are usually thin and hyperinflated and have a decreased diffusion capacity. During sleep, chronic bronchitic patients display more severe hypoxemia. In general, the more hypoxic a COPD patient is during the day the more severe the hypoxemia experienced during sleep. Hypercapnia as a consequence of hypoventilation also occurs in COPD patients and is more pronounced in REM sleep. Some COPD patients may also suffer from comorbid OSA, a condition known as Overlap Syndrome.

Home non-invasive ventilation has the potential to reduce healthcare costs associated with the management of patients with severe COPD by significantly increasing the time between hospital readmissions.

Overlap Syndrome.    In patients with COPD-OSA Overlap Syndrome, CPAP has been shown to provide benefits in relation to reducing mortality, decreasing hospitalizations and improving lung function and gas exchange. Non-invasive ventilation, or NIV, has been demonstrated to improve outcomes in patients with acute exacerbations of COPD through its ability to improve respiratory acidosis and decrease dyspnea and work of breathing. It may also increase survival rates and reduce length of hospital stays, as well as reducing complicating factors such as ventilator-associated pneumonia. In patients with stable COPD, the advantages of home NIV are less clear, but clinical studies have shown improvements in dyspnea scores and health-related quality-of-life measures and reductions in hospital readmissions and intensive care stays.

 

-4-


Table of Contents

 

PART I

Item 1

 

RESMED INC. AND SUBSIDIARIES

 

Long-term oxygen therapy, or LTOT, is indicated in chronic respiratory failure patients. The administration of LTOT has been shown to increase survival rates in patients with severe resting hypoxemia. In hypoxemic COPD patients, LTOT is associated with a lower mortality compared to nocturnal oxygen therapy alone and also associated with improved health-related quality of life measures. In long-term COPD survivors with a history of chronic heart failure, LTOT is associated with a slowing of respiratory failure progression.

Obesity Hypoventilation Syndrome.    OHS is characterized by the combination of obesity, chronic alveolar hypoventilation leading to daytime hypercapnia and hypoxia and sleep apnea after the exclusion of other causes of alveolar hypoventilation. An estimated 90% of patients with OHS also have OSA. In patients with OHS, positive airway therapy, both CPAP and NIV, has been shown to effectively treat upper airway obstruction and reverse daytime respiratory failure as well as reduce the work of breathing and improve respiratory drive.

Neuromuscular Disease.    Neuromuscular disease is a broad term that encompasses many diseases that either directly (via intrinsic muscle pathology) or indirectly (via nerve pathology) impair the functioning of muscles. Symptoms of neuromuscular disease and respiratory failure include increasing generalized weakness and fatigue, dysphagia, dyspnoea on exertion and at rest, sleepiness, morning headache, difficulties with concentration and mood changes. Most neuromuscular diseases are characterized by progressive muscular impairment leading to loss of ambulation, being wheelchair-bound, swallowing difficulties, respiratory muscle weakness and, eventually, death from respiratory failure. Neuromuscular disorders can progress rapidly or slowly. Rapidly progressive conditions, such as ALS and Duchenne muscular dystrophy in teenagers, are characterized by muscle impairment which worsens over months and can result in death within a few years. Variable or slowly progressive conditions, such as myotonic muscular dystrophy, are characterized by muscle impairment that worsens over years and may mildly reduce life expectancy.

NIV treatment to patients with neuromuscular disease may lead to improvements in respiratory failure symptoms and daytime arterial blood gases. In ALS patients, NIV treatment has been associated with an improvement in quality of life measures, sleep-related symptoms and survival. Studies have demonstrated that patients with Duchenne muscular dystrophy may improve in quality of life measures and may increase chance of survival with NIV treatment.

Software as a Service

Due to multiple acquisitions, including Brightree in April 2016, HEALTHCAREfirst in July 2018 and MatrixCare in November 2018, our operations now include platforms that comprise our SaaS business. Our SaaS strategy is to develop a portfolio that assists durable or home medical equipment (DME/HME) providers, and other long-term care providers operate more effectively and efficiently across various out-of-hospital care settings. Our SaaS portfolio provides services across the HME, home health and hospice, skilled nursing, life plan community and senior living, and private duty services. Our offerings can help providers perform analytics, manage documentation and implement new reimbursement requirements as well as more effectively transfer data as patients move between different care settings.

Business Strategy

We believe that the sleep apnea and respiratory care markets will continue to grow in the future due to a number of factors, including increasing awareness of OSA, CSA and COPD, improved understanding of the role of sleep apnea treatment in the management of cardiac, neurologic, metabolic and related disorders, improved understanding of the role of non-invasive ventilation in the management of COPD, and an increase in the use of digital and product technology to improve patient outcomes and create efficiencies for customers and providers. Our strategy for expanding our business operations and capitalizing on the growth of the sleep apnea and respiratory care markets, as well as growth in out-of-hospital care settings, consists of the following key elements:

Continue Product Development and Innovation in Sleep Apnea and Respiratory Care Products.    We are committed to ongoing innovation in developing products for the diagnosis and treatment of sleep apnea. We have been a leading innovator of products designed to treat sleep apnea more effectively, increase patient comfort and encourage compliance with prescribed therapy. In recent years we have introduced a full suite of masks in our AirTouch and AirFit ranges as well as advanced and expanded the integrations of our therapy-based software solutions, including AirView, to promote greater patient adherence. Our recent acquisitions have included a portfolio of sleep apnea products through our acquisition of Curative Medical.

Likewise, we are committed to ongoing innovation of our respiratory care products that serve the needs of patients with COPD and neuromuscular diseases, providing advanced and expanded the integrations of our therapy-based software solutions including AirView for Respiratory Care, enabling clinicians to remotely monitor patients on some ventilation devices and bilevel devices. We acquired a digital health platform for inhalers through our acquisition of Propeller Health in 2019, rounding out our portfolio to treat COPD patients through their therapy journey across different stages of their disease.

 

-5-


Table of Contents

 

PART I

Item 1

 

RESMED INC. AND SUBSIDIARIES

 

Broaden our digital health technology foundation.    Digital enablement is central to our strategy. Our cloud-based digital health applications, along with our devices, are designed to provide connected care to improve patient outcomes and efficiencies for our customers, allowing fewer professionals to manage more patients and empower patients to track their own health outcomes. We are expanding our cloud-based patient management and engagement platforms, such as AirView, enabling remote monitoring, over-the-air trouble shooting and changing of device settings, U-Sleep enabling automated patient coaching through a text, email or interactive voice phone call and myAir, a patient engagement application that provides sleep data and a daily score based on their previous night’s data. In the United States we have released ResMed MaskSelector, an easy-to-use digital tool to make mask selection and sizing easier and more effective, and HelloSleep, an application to help patients prepare for their fitting and first nights of therapy.

We believe that the combination of continued product development, product and technology acquisitions and innovation are key factors to our ongoing success. Approximately 16% of our employees are devoted to research and development activities.

Expand SaaS Solutions in Out-of-Hospital Care Settings.    Our vision is to transform and significantly improve out-of-hospital (OOH) healthcare through a strategy of enabling better patient care, improving clinical decision support, and driving interoperability across out-of-hospital healthcare settings. Since acquiring Brightree in 2016, plus MatrixCare and HEALTHCAREfirst in 2018, we offer software solutions across multiple out-of-hospital healthcare settings including HME, home health and hospice, skilled nursing, life plan communities, senior living and private duty. We are connecting capabilities across the platforms in these out-of-hospital care settings to help our customers be more efficient, better serve people, keep them out-of-hospital, and in lower-cost, higher-quality care settings. Today, our SaaS solutions serve OOH customers combining over 90 million individual accounts.

Expand Geographic Presence.    We market our products in more than 140 countries to sleep clinics, home healthcare dealers, patients and third-party payors. We intend to increase our sales and marketing efforts in our principal markets, as well as expand the depth of our presence in other high-growth geographic regions. In 2016, we acquired Curative Medical to invest in the China market and expand our growth potential in sleep apnea, COPD and respiratory care in China. In 2019, we acquired HB Healthcare, a privately owned HME that serves both reimbursed and cash-pay customers of sleep and respiratory care devices in South Korea. In 2021, we acquired Tong-il, another leading sleep and respiratory care HME provider in South Korea, reinforcing both our commitment and capability to serve millions of South Korean patients living with sleep apnea, COPD, and other chronic respiratory diseases.

Increase Public and Clinical Awareness.    We continue to expand our existing promotional activities to increase awareness of sleep apnea, COPD and other clinical conditions that can be treated with our industry-leading solutions. These promotional activities target both the population predisposed to sleep apnea and medical specialists, such as pulmonologists, sleep medicine specialists, primary care physicians, cardiologists, neurologists and other medical subspecialists who treat these conditions and their associated comorbidities. We target special interest groups, including the National Stroke Association, the American Heart Association, COPD Foundation and the National Sleep Foundation, to further increase awareness of the relationship between OSA, COPD, neuromuscular disease and comorbidities such as cardiac disease, diabetes, hypertension and obesity. The programs also support our efforts to inform the community of the dangers of sleep apnea with regard to occupational health and safety, especially in the transport industry. We have helped establish a center for clinical care and medical research at the University of California, San Diego in the fields of sleep apnea and COPD.

Expand into New Clinical Applications.    We continually seek to identify new applications of our technology for significant unmet medical needs. Studies have established a clinical association between OSA and both stroke and chronic heart failure, and have recognized sleep apnea as a cause of hypertension or high blood pressure. Research also indicates that sleep apnea is independently associated with glucose intolerance and insulin resistance. Additionally, research supported by ResMed has demonstrated that the addition of non-invasive ventilation to patients with severe COPD who are receiving oxygen therapy, provides meaningful clinical benefits to the patient, and the broader healthcare system. We maintain close working relationships with a number of prominent physicians to explore new medical applications for our products and technology.

Leverage the Experience of our Management Team.    Our senior management team has extensive experience in the medical device industry in general, and in the fields of sleep apnea, respiratory care and healthcare informatics in particular. We intend to continue to leverage the experience and expertise of these individuals to maintain our innovative approach to the development of products and solutions, and to increase awareness of the serious medical problems caused by sleep apnea and the use of non-invasive ventilation, and in-home life support ventilation to treat COPD and other chronic respiratory diseases.

 

-6-


Table of Contents

 

PART I

Item 1

 

RESMED INC. AND SUBSIDIARIES

 

Products

Our portfolio of products includes devices, diagnostic products, mask systems, headgear and other accessories, dental devices and cloud-based software informatics solutions. For purposes of the following discussion, we refer to our air flow generators and ventilators collectively as devices.

Devices

We produce cloud-connected CPAP, APAP, bilevel, and ASV devices that deliver positive airway pressure through a patient interface, either a mask or cannula. Our APAP devices, known as AutoSet, are based on a proprietary technology to monitor breathing and can also be used in the diagnosis, treatment and management of OSA. During fiscal year 2017, we launched AirMini, a small portable CPAP combining the same proven therapy modes used in the AirSense 10 with effective waterless humidification enabling portable convenience. We commenced a controlled product launch of AirSense 11 in fiscal year 2021, which will be followed by a broader launch throughout fiscal year 2022. AirSense 11 will introduce new features such as a touch screen, algorithms for patients new to therapy and digital enhancements, such as over-the-air update capabilities. We also acquired a line of Chinese-developed and manufactured sleep and ventilation devices with the acquisition of Curative Medical in fiscal year 2016. Devices in total accounted for approximately 50%, 51% and 52% of our net revenues in fiscal years 2021, 2020 and 2019, respectively.

The tables below provide a selection of products, as known by our trademarks.

CPAP
PRODUCTS

DESCRIPTION

AirSense 10 Elite

An advanced fixed-pressure therapy device with an integrated humidifier and built-in wireless connectivity. It is designed to be intuitive and easy-to-use.

 

AirSense 10 CPAP

The AirSense 10 CPAP is a fixed-pressure therapy device and built-in wireless connectivity. It also provides compliance, AHI and leak data reporting.

 

AUTOSET
PRODUCTS

DESCRIPTION

AirSense 10 Auto

A premium auto-adjusting therapy device featuring AutoRamp™ with sleep onset detection, expiratory pressure relief (EPR™) and Easy-Breathe technology. The device also features built-in wireless connectivity.

 

AirSense 10 AutoSet

for Her

The first complete sleep therapy solution tailored for women. The AirSense 10 AutoSet for Her is based on ResMed’s AutoSet algorithm. It responds to female-specific characteristics of sleep apnea and is tailored to meet the special sleep needs of women.

AirMini

A small portable CPAP device featuring the same auto-adjusting therapy modes used in the AirSense™ 10 Auto. The device also features built-in Bluetooth connectivity and effective waterless humidification enabled by HumidX technology.

 

BILEVEL
PRODUCTS

DESCRIPTION

AirCurve 10 S

A bilevel device for patients who need extra pressure support or find it difficult to adjust to therapy on a fixed pressure continuous positive airway pressure device. The device features built-in wireless connectivity and works with our AirView™ patient monitoring software.

 

AirCurve 10 V Auto

An auto-adjusting bilevel device for patients who need greater pressure support to treat their obstructive sleep apnea. The device features built-in wireless connectivity and works with our AirView™ patient monitoring software.

 

AirCurve 10 ST

A bilevel device with backup rate that provides exceptional patient-ventilator synchrony, reducing the work of breathing so patients remain comfortable and well ventilated. The device features built-in wireless connectivity and works with our AirView™ patient monitoring software.

 

AirCurve 10 ST-A

A bilevel device that provides effective non-invasive ventilation for patients with respiratory insufficiency from conditions including neuromuscular disease, restrictive lung disorders, COPD and hypoventilation syndromes.

AirCurve 10 ASV and CS

Adaptive servo-ventilators specifically designed to treat patients exhibiting central sleep apnea (CSA), mixed sleep apnea and periodic breathing, with or without obstructive sleep apnea. These devices also feature built-in wireless connectivity and works with our AirView™ patient monitoring software.

 

 

-7-


Table of Contents

 

PART I

Item 1

 

RESMED INC. AND SUBSIDIARIES

 

VENTILATION
PRODUCTS

DESCRIPTION

Stellar 100 and 150

Pressure support and volume non-invasive ventilators with invasive capabilities designed to suit a range of environments and for various respiratory patient types.

 

Astral 100 and 150

Pressure support and volume ventilators for invasive and non-invasive purposes so it can be used from the hospital to the home.

 

Lumis 100 and 150

Pressure support non-invasive ventilators that support a variety of therapy modes with built-in wireless connectivity and integrated humidification.

 

Lumis ST-A

A Pressure support non-invasive ventilator that supports a variety of therapy modes with built-in wireless connectivity, integrated humidification and a range of fixed and adjustable alarms.

 

Mask Systems, Diagnostic Products, Accessories and Other Products

Masks, diagnostic products and accessories together accounted for approximately 38%, 37% and 37% of our net revenues in fiscal years 2021, 2020 and 2019, respectively.

Mask Systems

Mask systems are one of the most important elements of sleep apnea treatment systems. Masks are a primary determinant of patient comfort and as such may drive or impede patient compliance with therapy. We have been a consistent innovator in small nasal, nasal pillows and full-face masks, by improving patient comfort while minimizing size and weight.

The table below provides an of overview of our mask systems by category.

CATEGORY

DESCRIPTION

Minimalist

AirFit F30, AirFit P10, and AirFit N30 minimalist masks feature our lightest, lowest profile designs. The features of these masks are focused on minimizing contact with the patient’s face to reduce red marks and irritation.

 

Freedom

AirFit N30i, AirFit P30i, and AirFit F30i freedom masks, which feature top-of-head tubing design allowing flexibility to easily switch sleep positions.

 

Ultra Soft

The AirTouch F20 and AirTouch N20 masks feature a soft and breathable AirTouch cushion designed to enhance CPAP mask comfort.

 

Universal Fit

AirFit F20 and AirFit N20 masks are designed to fit a wide range of faces due to the InfinitySeal silicone cushion that adapts to unique facial contours, which increases comfort, improves the fit and reduces leakage.

 

Diagnostic Products

We market sleep recorders for the diagnosis and titration of sleep apnea in sleep clinics and hospitals. These diagnostic systems record relevant respiratory and sleep data, which can be analyzed by a sleep specialist or physician who can then tailor an appropriate OSA treatment regimen for the patient.

PRODUCTS

DESCRIPTION

ApneaLink Air

A portable diagnostic device which measures oximetry, respiratory effort, pulse, nasal flow and snoring. Works with AirView Diagnostics to provide comprehensive diagnostic solution to clinicians.

 

 

-8-


Table of Contents

 

PART I

Item 1

 

RESMED INC. AND SUBSIDIARIES

 

Connected Solutions and Other Products

We have a suite of products that are designed to allow fewer professionals to manage more patients and empower patients to track their own health outcomes. We are expanding our cloud-based patient management and engagement platforms, such as AirView, enabling remote monitoring, over-the-air trouble shooting and changing of device settings, U-Sleep enabling automated patient coaching through a text, email or interactive voice phone call and myAir, a patient engagement application that provides sleep data and a daily score based on their previous night’s data.

PRODUCTS

DESCRIPTION

AirView

A cloud-based system enabling remote monitoring and changing of patients’ device settings. AirView also makes it easier to simplify workflows and collaborate more efficiently across the patient’s care network.

 

myAir

A personalized therapy management application for patients with sleep apnea providing support, education and troubleshooting tools for increased patient engagement and improved compliance.

 

U-Sleep

A compliance monitoring solution that enables HMEs to streamline their sleep programs to achieve better business and patient outcomes.

 

Connectivity Module

A module providing cellular connection between our compatible ventilation devices (e.g., Astral, Stellar) and our AirView™ system.

 

Propeller

Solutions

Propeller's inhaler sensors track medication usage and pair with a companion smartphone application, giving people with asthma or COPD a better understanding of their disease and promoting increased adherence to treatment. The Propeller Provider Portal gives clinicians the timely and accurate information they need to make better treatment decisions.

 

SaaS Products

Following multiple acquisitions, including Brightree in April 2016, HEALTHCAREfirst in July 2018 and MatrixCare in November 2018, we now supply out-of-hospital software products designed to support the professionals and caregivers helping people stay healthy in the home or care setting of their choice. SaaS revenue accounted for approximately 12%, 12% and 11% of our net revenue in fiscal years 2021, 2020 and 2019, respectively.

PRODUCTS

DESCRIPTION

Brightree solutions

Brightree enables out-of-hospital care organizations to improve their business performance and deliver better health outcomes. As an industry-leading cloud-based healthcare IT company, Brightree provides solutions and services for thousands of organizations in home medical equipment and pharmacy, orthotic and prosthetic, and home infusion.

 

MatrixCare solutions

MatrixCare’s EHR software as a service solutions are used by skilled nursing and senior living providers, life plan communities (CCRCs), and home health and hospice organizations to improve efficiencies and promote a better quality of life for the people they serve.

 

HEALTHCAREfirst

solutions

HEALTHCAREfirst offers electronic health record, or EHR, software, billing and coding services, and advanced analytics that enable home health and hospice agencies to optimize their clinical, financial and administrative processes.

 

Product Development and Clinical Trials

We have a strong track record of innovation in the sleep and respiratory care markets. In 1989, we introduced our first CPAP device. Since then we have been committed to an ongoing program of product advancement and development. Currently, our product development and clinical trial efforts are focused on not only improving our current product offerings and usability, but also expanding into new product applications.

 

We continually seek to identify new applications of our technology for significant unmet medical needs. Sleep apnea is associated with a number of symptoms beyond excessive daytime sleepiness and irritability. Studies have established a clinical association between untreated sleep apnea and systemic hypertension, diabetes, coronary artery disease, stroke, atrial fibrillation, chronic heart failure, and mortality.

Across the sleep and respiratory care platforms, we support clinical trials in many countries including the United States, Germany, Netherlands, France, Japan, the United Kingdom, Switzerland, China, Spain, Canada, Singapore and Australia to develop new clinical applications for our technology. We also continue to support some of the largest sleep apnea studies in history by performing advanced statistical analyses on millions of real world clinical data points collected through our cloud-connected devices and patient engagement tools. These studies, which we have begun to publish, provide clinical insights around patient management, device settings and predictors of patient adherence that inform our product development efforts.

 

-9-


Table of Contents

 

PART I

Item 1

 

RESMED INC. AND SUBSIDIARIES

 

We consult with physicians at major medical centers throughout the world to identify clinical and technological trends in the treatment of sleep apnea, COPD and the other conditions associated with these diseases. New product ideas are also identified by our marketing staff, direct sales force and network of distributors, customers, clinicians and patients.

Sales and Marketing

We currently market our products in more than 140 countries through a network of distributors and our direct sales force. We attempt to tailor our marketing approach to each national market, based on regional awareness of sleep apnea as a health problem, physician referral patterns, consumer preferences and local reimbursement policies. See Note 15 – Segment Information of the Notes to Consolidated Financial Statements (Part II, Item 8) for financial information about our geographic areas.

United States, Canada, and Latin America.    Our products are typically purchased by a home healthcare dealer who then sells the products to the patient. The decision to purchase our products, as opposed to those of our competitors, is made or influenced by one or more of the following individuals or organizations: the prescribing physician and their staff; the home healthcare dealer; the insurer and the patient. In the United States, Canada and Latin America, our sales and marketing activities are conducted through a field sales organization made up of regional territory representatives, program development specialists and regional sales directors. Our field sales organization markets and sells products to home healthcare dealer branch locations throughout the United States, Canada and Latin America.

We also market our products directly to physicians and sleep clinics. Patients who are diagnosed with OSA or another respiratory condition and prescribed our products are typically referred by the diagnosing physician or sleep clinic to a home healthcare dealer to fill the prescription. The home healthcare dealer, in consultation with the referring physician, will assist the patient in selecting the equipment, fit the patient with the appropriate mask and set the device pressure to the prescribed level.

Our SaaS solutions are sold to providers of healthcare in various out-of-hospital settings. We market and sell our Brightree business management software and service solutions to providers in the U.S. and our primary markets are HME, pharmacy, home infusion, orthotics and prosthetics. Our sales activities for Brightree products are conducted through a sales organization made up of strategic account managers, sales engineers and sales directors. We develop, market and sell our MatrixCare care management and related ancillary solutions to providers in the U.S. and our primary markets are senior living; skilled nursing; life plan communities; home health, home care, and hospice agencies as well as related accountable care organizations. Our MatrixCare management solutions are primarily sold through direct sales and ancillary solutions are sold both through direct sales and channel partners.

Combined Europe, Asia, and other markets.    We market our products in most major countries in combined Europe, Asia and other markets. We have wholly-owned subsidiaries in Australia, Austria, China, Czech Republic, Denmark, Finland, France, Germany, India, Ireland, Japan, Korea, Netherlands, New Zealand, Norway, Poland, Sweden, Switzerland, Taiwan, Thailand, and the United Kingdom. We use a combination of our direct sales force and independent distributors to sell our products in combined Europe, Asia and other markets. We select independent distributors in each country based on their knowledge of respiratory medicine and a commitment to sleep apnea therapy. In countries where we sell our products direct, a local senior manager is responsible for direct national sales. In many countries we sell our products to home healthcare dealers or hospitals who then sell the products to the patients. In Germany, Australia, New Zealand, and South Korea, we also operate home healthcare business models, in which we provide products and services directly to patients.

We do not sell our SaaS products in combined Europe, Asia, and other markets.

Manufacturing

We operate a globally distributed manufacturing network designed to optimize quality, cost control, time to market for new product introduction and supply chain resilience. Our manufacturing operations consist of specialist component production as well as assembly and testing of our devices, masks and accessories. Of the numerous raw materials, parts and components purchased for assembly of our therapeutic and diagnostic sleep disorder products, many are available from multiple vendors. We also purchase uniquely configured components from various suppliers, including some who are single-source suppliers for us. Any reduction or halt in supply from one of these suppliers could limit our ability to manufacture our products or devices until a replacement supplier is found and qualified. We generally manufacture to our internal sales forecasts and fill orders as received. We strive for continuous improvement in manufacturing processes to deliver year-on-year improvement in output, cost and product quality. Each manufacturing site and team are responsible for the quality of their product group and decisions are based on performance and quality measures, including customer feedback.

 

-10-


Table of Contents

 

PART I

Item 1

 

RESMED INC. AND SUBSIDIARIES

 

Our quality management system is based upon the requirements of ISO 9001, ISO 13485, FDA Quality System Regulation for Medical Devices, European Medical Device Regulation (“MDR”), the Medical Device Directive (93/42/EEC) and other applicable regulations for the markets in which we sell. Our main manufacturing sites are certified to ISO 13485 and are audited at regular intervals by a Notified Body. Additionally, our Sydney, Tuas, San Diego, Atlanta and Moreno Valley sites are certified under the Medical Device Single Audit Program or MDSAP, an audit of medical device manufacturers’ quality management system to satisfy multiple regulatory requirements. MDSAP audits are conducted by a MDSAP recognized auditing organization and can fulfill the needs of multiple regulatory jurisdictions (e.g., Australia, Brazil, Canada, Japan, and the United States of America).

Our main manufacturing facilities are located in Tuas, Singapore, which has replaced our former Loyang facility; Sydney, Australia; Chatsworth, California; Johor Bahru, Malaysia; Atlanta, Georgia and Suzhou, China. Refer to Item 2 for additional details on these properties.

Third-Party Coverage and Reimbursement

The cost of medical care in many of the countries in which we operate is funded in substantial part by government and private insurance programs. In Germany and Korea, we receive payments directly from these payors. While we do not generally receive direct payments for our products from payors in other countries, our success depends on the ability of patients to obtain coverage and adequate reimbursement from those payors.

In the United States, our products are purchased primarily by home healthcare dealers, hospitals or sleep clinics, who invoice third-party payors directly for reimbursement. Domestic third-party payors include government payors such as Medicare and Medicaid and commercial health insurance plans. These payors may deny coverage and reimbursement if they determine that a device is not used in accordance with certain covered treatment methods, or is experimental, unnecessary or inappropriate. The long-term trend towards cost-containment, through managed healthcare, or other legislative proposals to reform healthcare, could control or significantly influence the purchase of healthcare services and products and could result in lower prices for our products. In some foreign markets, such as France, Germany, and Japan, government reimbursement is currently available for purchase or rental of our products, subject to constraints such as price controls or unit sales limitations. In Australia, China, and some other foreign markets, there is currently limited or no reimbursement for devices that treat OSA.

Healthcare reform in the United States continues to bring significant changes to the third-party payor landscape. In 2011, the Centers for Medicare & Medicaid Services, or CMS, implemented the Durable Medical Equipment, Prosthetics, Orthotics and Supplies (DMEPOS) competitive bidding program, which included DME that we manufacture and develop, specifically, CPAP and respiratory assist devices (or bilevel devices), and related supplies and accessories. CMS is required by law to recompete these contracts at least once every three years. In addition, the 2010 Patient Protection and Affordable Care Act, as amended by the Health Care and Education Reconciliation Act, or collectively, the ACA, required CMS to roll out the competitive bidding process nationally or adjust prices in non-competitive bidding areas, also known as the non-bid or Round 3 areas, to match competitive bidding prices by 2016. CMS phased in the new rates beginning January 1, 2016, and the rates became fully effective July 1, 2016. The implementation of the competitive acquisition program has resulted in reduced Medicare payment for CPAP and respiratory assist devices, and related supplies and accessories in both competitive bidding areas and non-competitive bidding areas. Through an Interim Final Rule issued in May 2018, CMS increased the fee schedule amounts for certain DME in non-bid areas that qualify as rural and non-contiguous, setting payment for these areas for June 1, 2018 to December 31, 2018 at a 50/50 blended reimbursement rate based on the pre-competitive bidding reimbursement rate and the adjusted reimbursement rate set through competitive bidding.

Due to the lapse of competitive bid contracts as of December 31, 2018, effective January 1, 2019, Medicare beneficiaries could receive DME from any Medicare-enrolled supplier during a temporary gap in the competitive bidding program between January 1, 2019 and December 31, 2020. Pricing in competitive bidding areas and non-rural, contiguous non-bid areas continued to use adjusted fee schedule amounts, subject to annual Consumer Price Index (CPI) adjustments, during this temporary gap period beginning in 2019 through December 31, 2020. Under the Coronavirus Aid, Relief, and Economic Security Act, or the CARES Act, the blended fee schedule amounts for non-bid rural and non-contiguous areas was extended through the end of the COVID-19 public health emergency, which has been renewed through July 20, 2021, and a blended fee schedule amount was implemented for all other areas for the same period.

 

-11-


Table of Contents

 

PART I

Item 1

 

RESMED INC. AND SUBSIDIARIES

 

CMS competed 16 product categories in Round 2021 of the DMEPOS competitive bidding program, which took effect on January 1, 2021 and extends through December 31, 2021. There have been some revisions to the bidding methodology including the plan to implement surety bond requirements, lead item pricing, and setting reimbursement rates at the maximum winning bid rate instead of the median winning bid rate. Although CMS previously expanded the categories of devices subject to competitive bidding to include non-invasive ventilators, or NIVs, starting in 2021, in response to the COVID-19 pandemic, CMS removed NIVs from Round 2021 of the DMEPOS Competitive Bidding Program. Of the 15 remaining product categories that were bid for in Round 2021, CMS awarded competitive bidding contracts for only two categories, off-the-shelf (OTS) back braces and OTS knee braces. Payment for the items where contracts were not awarded will be based on adjusted fee schedule amounts, pending further rulemaking.

The ACA, which was passed both to expand the number of individuals with healthcare coverage and to develop additional revenue sources, also included, among other things, a deductible excise tax equal to 2.3% of the price for which medical devices are sold in the United States on any entity that manufactures or imports medical devices, with limited exceptions, beginning in 2013. However, this excise tax was subsequently suspended by the U.S. Congress for medical device sales, beginning in 2016 and permanently repealed, effective January 1, 2020. The ACA also provided for a number of Medicare regulatory requirements, including new face-to-face encounter requirements for DME and home health services.

Since its enactment, there have been judicial, executive and Congressional challenges to certain aspects of the ACA. On June 17, 2021, the U.S. Supreme Court dismissed the most recent judicial challenge to the ACA brought by several states without specifically ruling on the constitutionality of the ACA. Prior to the Supreme Court’s decision, President Biden issued an executive order to initiate a special enrollment period for purposes of obtaining health insurance coverage through the ACA marketplace, which began on February 15, 2021 and remained open through August 15, 2021. The executive order also instructed certain governmental agencies to review and reconsider their existing policies and rules that limit access to healthcare, including among others, reexamining Medicaid demonstration projects and waiver programs that include work requirements, and policies that create unnecessary barriers to obtaining access to health insurance coverage through Medicaid or the ACA.

In addition, other legislative changes have been proposed and adopted since the ACA was enacted. On August 2, 2011, the Budget Control Act of 2011 was signed into law, which, among other things, resulted in reductions to Medicare payments to providers of 2% per fiscal year, which went into effect on April 1, 2013 and, due to subsequent legislative amendments to the statute, will remain in effect through 2030, with the exception of a temporary suspension from May 1, 2020 through December 31, 2021, unless additional Congressional action is taken. In addition, on January 2, 2013, the American Taxpayer Relief Act of 2012 was signed into law, which, among other things, further reduced Medicare payments to several providers, including hospitals, and increased the statute of limitations period for the government to recover overpayments to providers from three to five years.

We expect that the ACA, these new laws and other healthcare reform measures that may be adopted in the future may result in additional reductions in Medicare and other healthcare funding, more rigorous coverage criteria, new payment methodologies and additional downward pressure on the price that we receive for our products and services. Any reduction in reimbursement from Medicare or other government programs may result in a similar reduction in payments from private payors. The implementation of cost containment measures or other healthcare reforms may have a material adverse impact on our revenues, profit margins, profitability, operating cash flows and results of operations.

Service and Warranty

We generally offer either one-year or two-year limited warranties on our devices. In some regions and for certain customers we also offer extended warranties on our devices for one to three years in addition to our limited warranty. Warranties on mask systems are for 90 days. Our distributors either repair our products with parts supplied by us or arrange shipment of products to our facilities for repair or replacement. We receive returns of our products from the field for various reasons. We believe that the level of returns experienced to date is consistent with levels typically experienced by manufacturers of similar devices. We provide for warranties and returns based on historical data.

Competition

The markets for our products and services are highly competitive. We believe that the principal competitive factors in all of our markets are product features, value-added solutions, reliability and price. Customer support, reputation and efficient distribution are also important factors. We compete on a market-by-market basis with various companies, some of which have greater financial, research, manufacturing and marketing resources than us. The disparity between our resources and those of our competitors may increase as a result of the trend towards consolidation in the healthcare industry. In addition, some of our competitors are affiliates of customers of ours, which may make it difficult to compete with them.

 

-12-


Table of Contents

 

PART I

Item 1

 

RESMED INC. AND SUBSIDIARIES

 

Our primary Sleep and Respiratory Care competitors include Philips BV; Fisher & Paykel Healthcare Corporation Limited; DeVilbiss Healthcare; Apex Medical Corporation; BMC Medical Co. Ltd.; and regional manufacturers. Finally, our products compete with surgical procedures, nerve stimulation devices and dental appliances designed to treat OSA and other sleep apnea-related respiratory conditions. The development of new or innovative procedures, devices or therapies, such as pharmaceutical, by others could result in our products becoming obsolete or noncompetitive, which would harm our revenues and financial condition.

For our SaaS business, the market is highly competitive, rapidly evolving, and subject to changing technology, low barriers to entry, shifting customer needs and frequent introductions of new products and services. The development of new or innovative solutions by others could result in our solutions becoming obsolete or noncompetitive, which would harm our revenues and financial condition.

Any product developed by us will have to compete for market acceptance and market share. An important factor in such competition may be the timing of market introduction of competitive products and solutions. Accordingly, the speed with which we can develop products and solutions, complete clinical testing and regulatory clearance processes and provide commercial supply of products and solutions to the market are important competitive factors. In addition, our ability to compete will continue to be dependent on successfully protecting our patents and other intellectual property.

Patents and Proprietary Rights and Related Litigation

We rely on a combination of patents, designs, trademarks, trade secrets, copyrights, and non-disclosure agreements to protect our proprietary technology and rights. Some of these patents, patent applications and designs relate to significant aspects and features of our products. We believe the combination of these rights, in aggregate, are of material importance to each of our businesses. Through our various subsidiaries, as of the date of this report, we own or have licensed rights to approximately 8,300 pending, allowed or granted patents and designs. Patents and designs have various statutory terms based on the legislation in individual jurisdictions which may be subject to change. Of our patents, 598 U.S. patents and 1,423 foreign patents are due to expire in the next five years. We believe that the expiration of these patents will not have a material adverse impact on our competitive position.

Litigation has been necessary in the past and may be necessary in the future to enforce patents issued to us, to protect our rights, or to defend third-party claims of infringement by us of the proprietary rights of others. The defense and prosecution of patent claims, including pending claims, as well as participation in other inter-party proceedings, can be expensive and time-consuming, even in those instances in which the outcome is favorable to us. Patent laws regarding the enforceability of patents vary from country to country. Therefore, there can be no assurance that patent issues will be uniformly resolved, or that local laws will provide us with consistent rights and benefits.

Government Regulations

FDA

Our products are subject to extensive regulation particularly as to safety, efficacy and adherence to FDA Quality System Regulation, and related manufacturing standards. Medical device products are subject to rigorous FDA and other governmental agency regulations in the United States and similar regulations of foreign agencies abroad. The FDA regulates the design, development, research, preclinical and clinical testing, introduction, manufacture, advertising, labeling, packaging, marketing, distribution, import and export, and record keeping for such products, in order to ensure that medical products distributed in the United States are safe and effective for their intended use. In addition, the FDA is authorized to establish special controls to provide reasonable assurance of the safety and effectiveness of most devices. Non-compliance with applicable requirements can result in import detentions, fines, civil and administrative penalties, injunctions, suspensions or losses of regulatory approvals, recall or seizure of products, operating restrictions, refusal of the government to approve product export applications or allow us to enter into supply contracts, and criminal prosecution.

Unless an exemption applies, the FDA requires that a manufacturer introducing a new medical device or a new indication for use of an existing medical device obtain either a Section 510(k) premarket notification clearance or a premarket approval, or PMA, before introducing it into the U.S. market. The type of marketing authorization is generally linked to the classification of the device. The FDA classifies medical devices into one of three classes (Class I, II or III) based on the degree of risk the FDA determines to be associated with a device and the level of regulatory control deemed necessary to ensure the device’s safety and effectiveness.

 

-13-


Table of Contents

 

PART I

Item 1

 

RESMED INC. AND SUBSIDIARIES

 

Our products currently marketed in the United States are marketed pursuant to 510(k) pre-marketing clearances and are either Class I or Class II devices. The process of obtaining a Section 510(k) clearance generally requires the submission of performance data and often clinical data, which in some cases can be extensive, to demonstrate that the device is “substantially equivalent” to a device that was on the market before 1976 or to a device that has been found by the FDA to be “substantially equivalent” to such a pre-1976 device, a predecessor device is referred to as “predicate device.” As a result, FDA clearance requirements may extend the development process for a considerable length of time. In addition, in some cases, the FDA may require additional review by an advisory panel, which can further lengthen the process. The PMA process, which is reserved for new devices that are not substantially equivalent to any predicate device and for high-risk devices or those that are used to support or sustain human life, may take several years and requires the submission of extensive performance and clinical information.

Medical devices can be marketed only for the indications for which they are cleared or approved. After a device has received 510(k) clearance for a specific intended use, any change or modification that significantly affects its safety or effectiveness, such as a significant change in the design, materials, method of manufacture or intended use, may require a new 510(k) clearance or PMA approval and payment of an FDA user fee. The determination as to whether or not a modification could significantly affect the device’s safety or effectiveness is initially left to the manufacturer using available FDA guidance; however, the FDA may review this determination to evaluate the regulatory status of the modified product at any time and may require the manufacturer to cease marketing and recall the modified device until 510(k) clearance or PMA approval is obtained. The manufacturer may also be subject to significant regulatory fines or penalties.

Any devices we manufacture and distribute pursuant to clearance or approval by the FDA are subject to pervasive and continuing regulation by the FDA and certain state agencies. These include product listing and establishment registration requirements, which help facilitate FDA inspections and other regulatory actions. As a medical device manufacturer, all of our manufacturing facilities are subject to inspection on a routine basis by the FDA. We are required to adhere to applicable regulations setting forth detailed cGMP requirements, as set forth in the QSR, which require, manufacturers, including third-party manufacturers, to follow stringent design, testing, control, documentation and other quality assurance procedures during all phases of the design and manufacturing process. Noncompliance with these standards can result in, among other things, fines, injunctions, civil penalties, recalls or seizures of products, total or partial suspension of production, refusal of the government to grant 510(k) clearance or PMA approval of devices, withdrawal of marketing approvals and criminal prosecutions. We believe that our design, manufacturing and quality control procedures are in compliance with the FDA’s regulatory requirements.

We must also comply with post-market surveillance regulations, including medical device reporting requirements which require that we review and report to the FDA any incident in which our products may have caused or contributed to a death or serious injury. We must also report any incident in which our product has malfunctioned if that malfunction would likely cause or contribute to a death or serious injury if it were to recur.

Labeling and promotional activities are subject to scrutiny by the FDA and, in certain circumstances, by the Federal Trade Commission. Medical devices approved or cleared by the FDA may not be promoted for unapproved or uncleared uses, otherwise known as “off-label” promotion. The FDA and other agencies actively enforce the laws and regulations prohibiting the promotion of off-label uses, and a company that is found to have improperly promoted off-label uses may be subject to significant liability, including substantial monetary penalties and criminal prosecution.

Sales of medical devices outside the United States are subject to regulatory requirements that vary widely from country to country.

 

-14-


Table of Contents

 

PART I

Item 1

 

RESMED INC. AND SUBSIDIARIES

 

EEA

In the European Economic Area, (which is comprised of the 27 member states of the European Union plus Norway, Iceland and Liechtenstein), or EEA, manufacturers of medical devices need to comply with the Essential Requirements laid out in Annex I to the EU Medical Devices Directive (Council Directive 93/42/EEC) or with the General Safety and Performance Requirements (GSPR) of the new EU Medical Devices Regulation (EU 2017/745). Compliance with these requirements is a prerequisite to be able to affix the CE mark to medical devices, without which they cannot be marketed or sold in the EEA. To demonstrate compliance with the Essential Requirements and the GSPR and obtain the right to affix the CE Mark, manufacturers of medical devices must undergo a conformity assessment procedure, which varies according to the type of medical device and its classification. Except for low-risk medical devices (Class I with no measuring function and which are not sterile), where the manufacturer can issue an EC Declaration of Conformity based on a self-assessment of the conformity of its products with the Essential Requirements and the GSPR, a conformity assessment procedure requires the intervention of a Notified Body, which is an organization designated by a competent authority of an EEA country to conduct conformity assessments. Depending on the relevant conformity assessment procedure, the Notified Body would audit and examine the Technical File and the quality system for the manufacture, design and final inspection of the devices. The Notified Body issues a CE Certificate of Conformity following successful completion of a conformity assessment procedure conducted in relation to the medical device and its manufacturer and their conformity with the Essential Requirements and GSPR. This Certificate entitles the manufacturer to affix the CE mark to its medical devices after having prepared and signed a related EC Declaration of Conformity.

As a general rule, demonstration of conformity of medical devices and their manufacturers with the Essential Requirements and GSPR must be based, among other things, on the evaluation of clinical data supporting the safety and performance of the products during normal conditions of use. Specifically, a manufacturer must demonstrate that the device achieves its intended performance during normal conditions of use, that the known and foreseeable risks, and any adverse events, are minimized and acceptable when weighed against the benefits of its intended performance, and that any claims made about the performance and safety of the device are supported by suitable evidence.

All manufacturers placing medical devices into the market in the EEA must comply with the EU Medical Device Vigilance System. Under this system, incidents must be reported to the relevant authorities of the member states of the EEA, and manufacturers are required to take Field Safety Corrective Actions, or FSCAs, to reduce a risk of death or serious deterioration in the state of health associated with the use of a medical device that is already placed on the market. An incident is defined as any malfunction or deterioration in the characteristics and/or performance of a device, as well as any inadequacy in the labeling or the instructions for use which, directly or indirectly, might lead to or might have led to the death of a patient or user or of other persons or to a serious deterioration in their state of health. An FSCA may include the recall, modification, exchange, destruction or retrofitting of the device. FSCAs must be communicated by the manufacturer or its legal representative to its customers and/or to the end users of the device through Field Safety Notices. Where appropriate, our products commercialized in Europe are CE marked and classified as either Class I or Class II.

On April 5, 2017, the European Parliament passed the Medical Devices Regulation, which repeals and replaces the EU Medical Devices Directive. Unlike directives, which must be implemented into the national laws of the EEA member states, the regulations would be directly applicable (i.e., without the need for adoption of EEA member State laws implementing them) in all EEA member states and are intended to eliminate current differences in the regulation of medical devices among EEA member States. The Medical Devices Regulation, among other things, is intended to establish a uniform, transparent, predictable and sustainable regulatory framework across the EEA for medical devices and in vitro diagnostic devices and ensure a high level of safety and health while supporting innovation.

The Medical Device Regulation was meant to become applicable three years after publication (in May 2020). However, on April 23, 2020, to allow EEA national authorities, notified bodies, manufacturers and other actors to focus fully on urgent priorities related to the COVID-19 pandemic, the European Council and Parliament adopted Regulation 2020/561, postponing the date of application of the Medical Device Regulation by one year. The Medical Device Regulation thus became applicable on May 26, 2021. Devices lawfully placed on the market pursuant to the EU Medical Devices Directive prior to May 26, 2021 may generally continue to be made available on the market or put into service until May 26, 2025. The Medical Devices Regulation, among other things:

strengthens the rules on placing devices on the market and reinforces surveillance once they are available;

establishes explicit provisions on manufacturers' responsibilities for the follow-up of the quality, performance and safety of devices placed on the market;

improves the traceability of medical devices throughout the supply chain to the end-user or patient through a unique identification number;

sets up a central database to provide patients, healthcare professionals and the public with comprehensive information on products available in the EU; and

 

-15-


Table of Contents

 

PART I

Item 1

 

RESMED INC. AND SUBSIDIARIES

 

strengthens rules for the assessment of certain high-risk devices, such as implants, which may have to undergo an additional check by experts before they are placed on the market.

We have received certification or initiated the Medical Device Regulation certification process at several locations, including Sydney, Australia; San Diego, California; and Lyon, France. We continue to transition our certification profile to meet the new Medical Device Regulation requirements.

Other regulatory bodies

Our devices are sold in multiple countries and often need to be registered with local regulatory bodies such as the Therapeutic Goods Administration in Australia, Health Canada in Canada and CFDA in China.

Other Healthcare Laws

We are subject to a number of laws and regulations that may restrict our business practices, including, without limitation, anti-kickback, false claims and transparency laws with respect to payments and other transfers of value made to physicians and other healthcare providers. The government has interpreted these laws broadly to apply to the marketing and sales activities of manufacturers and distributors as well as revenue cycle management companies like us.

The federal Anti-Kickback Statute prohibits, among other things, persons or entities from knowingly and willfully soliciting, receiving, offering or providing remuneration, directly or indirectly, in cash or in kind, in exchange for or to induce either the referral of an individual for, or the purchase, lease, order or recommendation of, any good, facility, item or service for which payment may be made, in whole or in part, under federal healthcare programs such as Medicare and Medicaid. In addition, a person or entity does not need to have actual knowledge of this statute or specific intent to violate it in order to have committed a violation.

The federal civil False Claims Act prohibits, among other things, any person or entity from knowingly presenting, or causing to be presented, a false or fraudulent claim for payment or approval to the federal government or knowingly making, using or causing to be made or used a false record or statement material to a false or fraudulent claim to the federal government. A claim includes “any request or demand” for money or property presented to the U.S. government. The civil False Claims Act also applies to false submissions that cause the government to be paid less than the amount to which it is entitled, such as a rebate. Intent to deceive is not required to establish liability under the civil False Claims Act. In addition, a claim including items or services resulting from a violation of the federal Anti-Kickback Statute constitutes a false or fraudulent claim for purposes of the federal civil False Claims Act. Private suits filed under the civil False Claims Act, known as qui tam actions, can be brought by individuals on behalf of the government. These individuals may share in any amounts paid by the entity to the government in fines or settlement.

The federal Civil Monetary Penalties Law prohibits, among other things, the offering or transfer of remuneration to a Medicare or state healthcare program beneficiary if the person knows or should know it is likely to influence the beneficiary’s selection of a particular provider, practitioner, or supplier of services reimbursable by Medicare or a state healthcare program, unless an exception applies.

Additionally, there has been a recent trend of increased federal and state regulation of payments and transfers of value provided to healthcare professionals or entities.

The federal Physician Payments Sunshine Act, which requires certain manufacturers of drugs, biologicals, and medical devices or supplies that require premarket approval by or notification to the FDA, and for which payment is available under Medicare, Medicaid or the Children’s Health Insurance Program, to report annually to CMS information related to (i) payments and other transfers of value to teaching hospitals, physicians (as defined by statute) and, beginning in 2022, physician assistants, nurse practitioners and other practitioners, and (ii) ownership and investment interests held by such providers and their immediate family members. Applicable manufacturers are required to submit annual reports to CMS.

The federal Health Insurance Portability and Accountability Act of 1996, or HIPAA, created federal criminal statutes that prohibit among other actions, knowingly and willfully executing, or attempting to execute, a scheme to defraud any healthcare benefit program, including private third-party payors, knowingly and willfully embezzling or stealing from a healthcare benefit program, willfully obstructing a criminal investigation of a healthcare offense, and knowingly and willfully falsifying, concealing or covering up a material fact or making any materially false, fictitious or fraudulent statement in connection with the delivery of or payment for healthcare benefits, items or services. Like the Anti-Kickback Statute, a person or entity does not need to have actual knowledge of these statutes or specific intent to violate them in order to have committed a violation.

 

-16-


Table of Contents

 

PART I

Item 1

 

RESMED INC. AND SUBSIDIARIES

 

Also, many U.S. states and countries outside the U.S. have similar fraud and abuse statutes or regulations that may be broader in scope and may apply regardless of payor, in addition to items and services reimbursed under government programs. In addition, in the U.S., certain states also mandate implementation of commercial compliance programs, impose restrictions on device manufacturer marketing practices and/or require the tracking and reporting of gifts, compensation and other remuneration to healthcare professionals and entities.

The shifting commercial compliance environment and the need to build and maintain robust systems to comply with different compliance or reporting requirements in multiple jurisdictions increase the possibility that a healthcare company may fail to comply fully with one or more of these requirements. If our operations are found to be in violation of any of the health regulatory laws described above or any other laws that apply to us, we may be subject to penalties, including potentially significant criminal, civil and administrative penalties, damages, fines, disgorgement, imprisonment, exclusion from participation in government healthcare programs, additional integrity oversight and reporting obligations, contractual damages, reputational harm, administrative burdens, diminished profits and future earnings, and the curtailment or restructuring of our operations, any of which could adversely affect our ability to operate our business and our results of operations.

Data Privacy and Security Laws

Under HIPAA, as amended by the Health Information Technology for Economic and Clinical Health Act of 2009, or HITECH, which we collectively refer to as HIPAA, the Department of Health and Human Services, or HHS, has issued regulations, including the HIPAA Privacy, Security and Breach Notification Rules, to protect the privacy and security of protected health information, or PHI, used or disclosed by covered entities including health care providers and their business associates, as well as covered subcontractors. HIPAA also regulates standardization of data content, codes and formats used in health care transactions and standardization of identifiers for health plans and providers. Penalties for violations of HIPAA regulations include significant civil and criminal penalties for each violation. In addition to federal privacy and security regulations, there are a number of state laws governing confidentiality and security of personally identifiable information that are applicable to our business. For example, the California Consumer Privacy Act, or the CCPA, became effective on January 1, 2020. The CCPA gives California residents expanded rights to access and delete their personal information, opt out of certain personal information sharing and receive detailed information about how their personal information is used by requiring covered companies to provide new disclosures to California consumers (as that term is broadly defined) and provide such consumers new ways to opt-out of certain sales of personal information. The CCPA provides for civil penalties for violations, as well as a private right of action for data breaches that is expected to increase data breach litigation. Although the law includes limited exceptions, including for “protected health information” maintained by a covered entity or business associate, it may regulate or impact our processing of personal information depending on the context. CCPA’s implementation standards and enforcement practices are likely to remain uncertain for the foreseeable future, and the CCPA may increase our compliance costs and potential liability. Further, the California Privacy Rights Act, or CPRA, recently passed in California and not only revises but expands upon CCPA. The CPRA will impose additional data protection obligations on covered businesses, including additional consumer rights processes, limitations on data uses, new audit requirements for higher risk data, and opt outs for certain uses of sensitive data. It will also create a new California data protection agency authorized to issue substantive regulations and could result in increased privacy and information security enforcement. The majority of the provisions will go into effect on January 1, 2023, will supersede the CCPA, and additional compliance investment and potential business process changes may be required. In the event that we are subject to or affected by HIPAA, the CCPA, the CPRA or other domestic privacy and data protection laws, any liability from failure to comply with the requirements of these laws could adversely affect our financial condition. Similar privacy laws have been proposed at the federal level and in other states.

In some of our operations, such as those involving our cloud-based software digital health applications, we are a business associate under HIPAA and therefore required to comply with the HIPAA Security Rule, Breach Notification Rule and certain provisions of the HIPAA Privacy Rule, as well as the terms of our business associate agreements that we enter into with our covered entity customers, and are subject to significant civil and criminal penalties for failure to do so.

In addition, the General Data Protection Regulation, or GDPR, went into effect in May 2018. The GDPR imposes stringent data protection requirements for the processing of personal data of individuals in the European Economic Area, or EEA. The GDPR has increased our obligations, for example, by imposing higher standards for obtaining consent from individuals to process their personal data, requiring more robust disclosures to individuals, strengthening individual data rights, shortening timelines for data breach notifications, limiting retention periods and secondary use of information (including for research purposes), increasing requirements pertaining to health data and pseudonymised (i.e., key-coded) data and imposing additional obligations when we contract with third party processors in connection with the processing of the personal data. The GDPR also imposes strict rules on the transfer of personal data out of the EEA, including to the United States; recent legal developments in Europe have created complexity and uncertainty regarding such transfers of personal data from the EEA to the United States. For example, on July 16, 2020, the Court of Justice of the European Union, or CJEU, invalidated the EU-US Privacy Shield Framework, or Privacy Shield, under which personal data could be transferred from the EEA to United States entities that had self-certified under the Privacy Shield scheme. While the CJEU upheld the

 

-17-


Table of Contents

 

PART I

Item 1

 

RESMED INC. AND SUBSIDIARIES

 

adequacy of the standard contractual clauses (a standard form of contract approved by the European Commission as an adequate personal data transfer mechanism, and potential alternative to the Privacy Shield), the CJEU ruled that the underlying data transfers must be assessed on a case-by-case basis by the data controller to determine whether the personal data will be adequately protected. As a result, on June 4, 2021 the European Commission published a decision adopting an updated set of new standard contractual clauses designed to address issues identified by the CJEU. Existing data transfers that rely on the old standard contractual clauses can continue to be used until December 27, 2022 and the use of the new standard contractual clauses will still need to be assessed on a case-by-case basis taking into account the legal regime applicable in the destination country, in particular applicable surveillance laws and rights of individuals. The exact scope and applicability of the new standard contractual clauses is currently unclear, particularly regarding transfers to parties outside the EEA who are already subject to the GDPR. We are awaiting further clarification from the European Commission and therefore the full scope of application of the standard contractual clauses remains subject to review and change as we get a better understanding from the European Commission and national regulators. European data protection law provides that EEA member states may make their own further laws and regulations limiting the processing of genetic, biometric or health data, which could limit our ability to use and share personal data or could cause our costs could increase, and harm our business and financial condition. The GDPR and other similar regulations impose additional conditions in order to satisfy such consent for electronic marketing, such as a prohibition on pre-checked tick boxes and bundled consents, thereby requiring customers to affirmatively consent for a given purpose through separate tick boxes or other affirmative action. Failure to comply with the requirements of GDPR and the applicable national data protection and marketing laws of the EEA member states may result in fines of up to €20,000,000 or up to 4% of the total worldwide annual turnover of the preceding financial year, whichever is higher, and other administrative penalties as well as individual claims for compensation.

Further, from January 1, 2021, we have had to comply with the GDPR and the United Kingdom GDPR, which, together with the amended United Kingdom Data Protection Act 2018, retains the GDPR in United Kingdom national law. The United Kingdom data protection regime has the ability to separately fine up to the greater of £17.5 million or 4% of global turnover. The relationship between the United Kingdom and the EU in relation to certain aspects of data protection law remains unclear, and it is unclear how United Kingdom data protection laws and regulations will develop in the medium to longer term. On June 28, 2021, the European Commission adopted an adequacy decision in favor of the United Kingdom, enabling data transfers from EU member states to the United Kingdom without additional safeguards. However, the United Kingdom adequacy decision will automatically expire in June 2025 unless the European Commission renews or extends that decision and remains under review by the Commission during this period. These changes may lead to additional costs and increase our overall risk exposure.

Numerous other state, federal and foreign laws, including consumer protection laws and regulations, govern the collection, dissemination, use, access to, confidentiality and security of patient health information. In addition, Congress and some states are considering new laws and regulations that further protect the privacy and security of medical records or medical information. With the recent increase in publicity regarding data breaches resulting in improper dissemination of consumer information, all 50 states have passed laws regulating the actions that a business must take if it experiences a data breach, such as prompt disclosure to affected customers. Generally, these laws are limited to electronic data and make some exemptions for smaller breaches. Congress has also been considering similar federal legislation relating to data breaches. The Federal Trade Commission, or FTC, and states’ Attorneys General have also brought enforcement actions and prosecuted some data breach cases as unfair and/or deceptive acts or practices under the FTC Act. In addition to data breach notification laws, some states have enacted statutes and rules requiring businesses to reasonably protect certain types of personal information they hold or to otherwise comply with certain specified data security requirements for personal information. These laws may apply directly to our business or indirectly by contract when we provide services to other companies. We intend to continue to comprehensively protect all personal information and to comply with all applicable laws regarding the protection of such information.

Compliance with these and any other applicable privacy and data security laws and regulations is a rigorous and time-intensive process, and we may be required to put in place additional mechanisms ensuring compliance with the new data protection rules. If we fail to comply with any such laws or regulations, we may face significant fines and penalties that could adversely affect our business, financial condition and results of operations, damage our reputation and customers’ trust.

Human Capital

At ResMed, our mission of transforming patient care in the out-of-hospital setting through innovative solutions and tech-driven integrated care is achieved by our commitment and efforts in fostering an inclusive environment that creates a strong sense of belonging, unlocking the potential, passion and creativity of our people. ​ Our Code of Business Conduct & Ethics, Diversity and Inclusion programs and other practices and policies on workplace behavior, discrimination and harassment, health and safety, and employee benefits reinforce this environment and facilitate talent attraction, retention, and development.

 

-18-


Table of Contents

 

PART I

Item 1

 

RESMED INC. AND SUBSIDIARIES

 

As of June 30, 2021, we had approximately 7,970 employees or contingent workers, of which approximately 3,490 were employed in cost of sales activities including areas such as warehousing and manufacturing, 1,370 in research and development and 3,110 in sales, marketing and administration. Of our employees and contingent workers, approximately 2,960 (37%) were located in the United States, Canada and Latin America, 2,080 (26%) in Asia, 1,550 (19%) in Australia and 1,380 (17%) in Europe. We believe that the success of our business will depend, in part, on our ability to attract and retain qualified personnel.

Diversity & Inclusion

Our values of belonging, inclusion and diversity for success enables us to unlock the strengths of our people to transform healthcare and improve lives. Current strategic key initiatives include the management and expansion of Employee Resource Groups (“ERG”) and their leaders and Executive Sponsors, learning and development opportunities around the concepts of leading inclusively, inclusion in the workforce and unconscious bias, talent acquisition efforts around a sourcing and hiring competitive edge strategy, external relationships and partnerships, and internal metrics and measurements.

Employee Resource Groups.    We place high value on inclusion-building initiatives that create opportunities around cultural awareness and social learnings; this is largely done through engaging employees in our ERG programs supported by employees with diverse backgrounds, experiences or characteristics who share a common interest in professional development, improving corporate culture and delivering sustained business results. We maintain our ERG chapters worldwide and currently have nine groups: Black, Asia-American-Pacific Islander, LGBTQIA+, Hispanic and Latin, Veterans, Women, Women in Sales, Parents and Mosaics in Ireland and India that collectively focus on local and culturally appropriate inclusion-building needs.

Learning & Development of D&I Values.    Our leaders across the organization work directly with the Director of Diversity to identify and provide awareness trainings for their teams. We are launching a day of learning in each region for employees to learn more about diversity and inclusion.

Strategic Inclusive Development.     A Global Council of Ambassadors meets every two months to review and assess developments, observations and impressions related to ongoing diversity and inclusion efforts. We are in the process of updating our policies and Employee Handbook to formalize certain inclusivity initiatives. Additionally, we are assessing the language within the source code of our products and platforms to ensure that is inclusive and does not perpetuate racist stereotypes.

Leadership Engagement.    C-Suite Executives alongside the COO and CEO receive quarterly updates on diversity data and inclusion-building efforts. Additionally, the CEO and senior leaders across the organization have diversity and inclusion objectives embedded in their annual and quarterly goals.

Sourcing & Recruiting.    We train our recruiting workforce in diversity sourcing strategies and partners with external organizations that develop and supply diverse talent. In addition, we are building a diversity dashboard to better understand its metrics around applicants, candidates and its current workforce. Campaigns are being designed to collect more internal data and efforts are being made around gathering prospective candidates.

Talent Development and Retention

Building and strengthening our talent pipeline is imperative to our success. Our approach to talent and performance is designed to ensure employees and managers have regular feedback conversations about performance goals and development, to enable our high-performance culture, and to create an environment where we achieve our strategy

At ResMed, we have specific career and development pathways designed for specific roles in consultation with operational management, human resources, and learning and development specialists. We provide online courses that are role-specific, with formal tracking of employee completion and performance. Online and face-to-face courses on operational compliance issues are developed and delivered in-house. Online compliance courses on ResMed’s Code of Business Conduct and Ethics, diversity and inclusion, US Foreign Corrupt Practices Act, and health and safety are developed by our Learning and Development team with external subject-matter advisers.

 

-19-


Table of Contents

 

PART I

Item 1

 

RESMED INC. AND SUBSIDIARIES

 

Employee Safety and COVID-19 Related Measures

We believe maintaining a physically safe and mentally healthy working environment is essential in supporting our people deliver their best work. We employ global standards to provide the framework upon which locally compliant, integrated and effective health and safety management systems are built that enable the capability, autonomy & accountability of the local leaders to manage health and safety through day to day functions. Our approach is to place health & safety as a positive contributor to innovation, continuous improvement and business sustainability through focusing on making work easier which in turn makes work safer and more efficient.

In response to COVID-19, we maximized the production of ventilators, masks, and other respiratory devices to reach the patients who needed them most. This required keeping our employees safe and healthy, and keeping our manufacturing and distribution centers safe and operational. As such, in compliance with government regulations, we invested in creating safe work environments for our employees by implementing the following measures:

Adding work from home flexibility;

Adjusting attendance policies to encourage those who are sick to stay home;

Increasing cleaning protocols across all locations;

Initiating regular communication regarding impacts of the COVID-19 pandemic, including health and safety protocols and procedures;

Facilitating access to and encouraging vaccination of our employees

Implementing temperature screening of employees at our sites;

Establishing new physical distancing procedures for employees who need to be onsite;

Providing additional personal protective equipment and cleaning supplies;

Modifying workspaces

Implementing protocols to address actual and suspected COVID-19 cases and potential exposure; and

Prohibiting all domestic and international non-essential travel for all employees.

As COVID-19 restrictions abate, we may lift some of these measures in certain locations based on local needs and in accordance with local regulations.

Employee Engagement

We regularly seek employee feedback and sentiment about our workplace through a global engagement surveys that enable our people to comment on matters related to their employment experience. We openly share the survey results throughout the company and encourage teams to put in place action plans at global and local levels to address priority issues. Where benchmarks are available, our results are evaluated against comparable peer groups.

Employee Wellbeing

We are committed to improving the quality of life of our customers, our people and their families. We recognize the benefits of a healthy workforce and promote a holistic and inclusive approach to health and safety. Our health and wellbeing programs differ by country and may include company-sponsored health insurance, retirement savings plans, sleep apnea screening and treatment, smoking cessation, gym membership discounts, seasonal flu vaccinations, and many other programs to drive healthy behaviors and awareness.

As part of our commitment to addressing the stigma of mental health, leadership continually communicates the importance of self-care, asking for help, and setting work/life boundaries. We provide a comprehensive, company-funded global Employee Assistance Program (EAP) offering free local, expert mental health services for our people and their household through one-on-one support, monthly webinars, online courses, and crisis intervention services. Additionally, we implemented a company-wide Wellbeing Day for our people to focus on their mental, social and physical health.

 

-20-


Table of Contents

 

PART I

Item 1A

 

RESMED INC. AND SUBSIDIARIES

 

ITEM 1A  RISK FACTORS

Before deciding to purchase, hold or sell our common stock, you should carefully consider the risks described below in addition to the other cautionary statements and risks described elsewhere, and the other information contained, in this Report and in our other filings with the SEC, including our subsequent reports on Forms 10-Q and 8-K. The risks and uncertainties described below are not the only ones we face. Additional risks and uncertainties not presently known to us or that we currently deem immaterial may also affect our business. If any of these known or unknown risks or uncertainties actually occurs with material adverse effects on us, our business, financial condition and results of operations could be seriously harmed. In that event, the market price for our common stock will likely decline, and you may lose all or part of your investment.

Summary of Risk Factors

The following is a summary of the risks that are more fully described in the following section below:

Risks Related to Our Business and Industry

Our inability to compete successfully in our markets may harm our business.

Consolidation in the health care industry could have an adverse effect on our revenues and results of operations. 

Our business, financial condition and results of operations could be harmed by the effects of the COVID-19 pandemic.    

We are subject to various risks relating to international activities that could affect our overall profitability.   

Our products are the subject of clinical trials conducted by us, our competitors, or other third parties, the results of which may be unfavorable, or perceived as unfavorable, and could have a material adverse effect on our business, financial condition, and results of operations.    

We are subject to potential product liability claims that may exceed the scope and amount of our insurance coverage, which would expose us to liability for uninsured claims.    

Our intellectual property may not protect our products, and/or our products may infringe on the intellectual property rights of third-parties.    

If we fail to attract, develop and retain key employees our business may suffer.

Our leverage and debt service obligations could adversely affect our business.

Risks Related to Manufacturing, IT Systems, Commercial Operations and Plans for Future Growth

Disruptions in the supply of components from our suppliers could result in a significant reduction in sales and profitability.

We are increasingly dependent on information technology systems and infrastructure.   

Actual or attempted breaches of security, unauthorized disclosure of information, denial of service attacks or the perception that personal and/or other sensitive or confidential information in our possession is not secure, could result in a material loss of business, substantial legal liability or significant harm to our reputation.

We may not be able to realize the anticipated benefits from acquisitions, which could adversely affect our operating results.

Our business depends on our ability to market effectively to dealers of home healthcare products and sleep clinics. 

Our SaaS business depends substantially on customers entering into, renewing, upgrading and expanding their agreements for cloud services, term licenses, and maintenance and support agreements with us. Any decline in our customer renewals, upgrades or expansions could adversely affect our future operating results.  

If our SaaS products fail to perform properly or if we fail to develop enhancements, we could lose customers, become subject to service performance or warranty claims and our market share could decline.    

If there are interruptions or performance problems associated with our technology or infrastructure, our existing SaaS customers may experience service outages, and our new customers may experience delays in the deployment of our platforms.    

If we are unable to support our continued growth, our business could suffer.    

If a natural or man-made disaster strikes our manufacturing facilities, we will be unable to manufacture our products for a substantial amount of time and our sales and profitability will decline.   

 

-21-


Table of Contents

 

PART I

Item 1A

 

RESMED INC. AND SUBSIDIARIES

 

Risks Related to Non-Compliance with Laws, Regulations and Healthcare Industry Shifts

Healthcare reform may have a material adverse effect on our industry and our results of operations.  

Government and private insurance plans may not adequately reimburse our customers for our products, which could result in reductions in sales or selling prices for our products.    

Failure to comply with anti-kickback and fraud regulations could result in substantial penalties and changes in our business operations.    

Our use and disclosure of individually identifiable information, including health information, is subject to federal, state and foreign privacy and security regulations, and our failure to comply with those regulations or to adequately secure the information we hold could result in significant liability or reputational harm.    

Our business activities are subject to extensive regulation, and any failure to comply could have a material adverse effect on our business, financial condition, or results of operations.  

Product sales, introductions or modifications may be delayed or canceled as a result of FDA regulations or similar foreign regulations, which could cause our sales and profits to decline.    

We are subject to substantial regulation related to quality standards applicable to our manufacturing and quality processes. Our failure to comply with these standards could have an adverse effect on our business, financial condition, or results of operations.

Disruptions at the FDA and other government agencies caused by funding shortages or global health concerns could hinder their ability to hire, retain or deploy key leadership and other personnel, or otherwise prevent new or modified products from being developed, cleared or approved or commercialized in a timely manner or at all, which could negatively impact our business.

Off-label marketing of our products could result in substantial penalties.

Laws regulating consumer contacts could adversely affect our business operations or create liabilities.

Tax laws, regulations, and enforcement practices are evolving and may have a material adverse effect on our results of operations, cash flows and financial position.

We are subject to tax audits by various tax authorities in many jurisdictions.

Risks Related to the Securities Markets and Ownership of Our Common Stock

Our results of operations may be materially affected by global economic conditions generally, including conditions in the financial markets.

Our quarterly operating results are subject to fluctuation for a variety of reasons.

Delaware law and provisions in our charter and could make it difficult for another company to acquire us.


 

-22-


Table of Contents

 

PART I

Item 1A

 

RESMED INC. AND SUBSIDIARIES

 

Risk Factors

Risks Related to Our Business and Industry

Our inability to compete successfully in our markets may harm our business.    The markets for our products, which encompass Sleep and Respiratory Care products and SaaS offerings, are highly competitive and are characterized by frequent product improvements and evolving technology. Our ability to compete successfully depends, in part, on our ability to develop, manufacture and market innovative new products. For our Sleep and Respiratory Care business, the development of innovative new products by our competitors or the discovery of alternative treatments or potential cures for the conditions that our products treat could make our products noncompetitive or obsolete. Current competitors, new entrants, academics, and others are trying to develop new devices, alternative treatments or cures, and pharmaceutical solutions to the conditions our products treat. For SaaS, the market for business management software is highly competitive, rapidly evolving, subject to changing technology, with low barriers to entry, shifting customer needs and frequent introductions of new products and services. Many prospective customers have invested substantial personnel and financial resources to implement and integrate their current business management software into their operations and, therefore, may be reluctant or unwilling to change from their current solution or provider to one of our platforms or products.

Additionally, some of our competitors have greater financial, research and development, manufacturing and marketing resources than we do. The past several years have seen a trend towards consolidation in the healthcare industry and in the markets for our products. Industry consolidation could result in greater competition if our competitors combine their resources, if our competitors are acquired by other companies with greater resources than ours, or if our competitors become affiliated with customers of ours. This competition could increase pressure on us to reduce the selling prices of our products or could cause us to increase our spending on research and development and sales and marketing. If we are unable to develop innovative new products, maintain competitive pricing, and offer products that consumers perceive to be as good as those of our competitors, our sales and gross margins could decrease which would harm our business.

Consolidation in the health care industry could have an adverse effect on our revenues and results of operations.    Many home health care dealers and out-of-hospital health providers are consolidating, which may result in greater concentration of purchasing power. As the health care industry consolidates, competition to provide goods and services to industry participants may become more intense. These industry participants may try to use their market power to negotiate price concessions or reductions for medical devices and components produced by us. If we are forced to reduce our prices because of consolidation in the health care industry, our revenues may decrease and our consolidated earnings, financial condition, and/or cash flows may suffer.

Our business, financial condition and results of operations could be harmed by the effects of the COVID-19 pandemic.    We are subject to risks related to the global pandemic associated with COVID-19, which have had an adverse impact on certain aspects of our business. Specifically, diagnostic pathways for sleep apnea treatment, including physician practices, HME suppliers and sleep clinics, have been impacted and, in some instances, been required, to temporarily close due to governments’ “shelter-in-place” orders, quarantines or similar orders or restrictions enacted to control the spread of COVID-19. In some countries, new patients are prescribed sleep apnea treatment through hospitals that are directing their resources to critical care, including COVID-19 treatment. Although certain governments have begun to reduce or remove COVID-19 restrictions to varying degrees, we cannot predict the impact that will have on diagnostic and prescription pathways and demand for our products designed to treat sleep apnea. Furthermore, we cannot predict the extent, speed and effectiveness of worldwide containment and vaccination efforts and the impact of these factors will have on our employees, customers, vendors and patients.

While we have experienced increased demand for our respiratory care products due to the nature of COVID-19, we do not expect the same level of demand to continue as vaccination programs expand and infection rates decline globally. Decreases in future demand may result in excess inventory, which we may be unable to sell. Furthermore, due to governments’ varying restrictions on international and domestic travel, access to labor for our manufacturing facilities could be adversely impacted.

Our SaaS business has also been affected by COVID-19 and measures taken to control the spread of COVID-19. Some of our existing and potential SaaS customers are HME distributors and have been impacted by the same temporary business closures noted above. We also have existing and potential SaaS customers that operate care facilities and are either receiving and treating patients infected with COVID-19 or have implemented significant measures to safeguard their facilities against a potential COVID-19 outbreak. Given these challenging business conditions, businesses may be deterred from adopting new or changing SaaS platforms, which may adversely impact our ability to engage new customers for our SaaS businesses, or expand the services used by existing customers.

 

-23-


Table of Contents

 

PART I

Item 1A

 

RESMED INC. AND SUBSIDIARIES

 

We currently utilize third parties to, among other things, manufacture components and materials for our devices. Disruptions relating to the COVID-19 pandemic, including current shelter-in-place orders, could prevent employees, suppliers, distributors, and others from accessing manufacturing facilities and from transporting our products or the components required to manufacture our products. Further, worldwide supply chain disruption relating to the COVID-19 pandemic has resulted in component shortages that have and may continue to impact our ability to manufacture our devices. If either we or any third-party parties in the supply chain for materials used in the production of our devices continue to be adversely impacted by the restrictions resulting from the COVID-19 pandemic, our supply chain may be disrupted, limiting our ability to manufacture our devices. These disruptions may, among other things, impact our ability to produce and supply products in quantities necessary to satisfy customer demand, which could negatively impact our results of operations.

Health regulatory agencies globally may also experience disruptions in their operations as a result of the COVID-19 pandemic. Any delay or de-prioritization of our product development activities or delay in regulatory review resulting from such disruptions could materially affect our results of operations. We are also competing with participants in other industries, like the automobile industry for example, for essential inputs for our products, which may result in higher prices or scarcity of supply.

In addition to existing travel restrictions, countries may continue to close borders, impose prolonged quarantines, and restrict travel, which have disrupted and may continue to disrupt our ability to move our product by air and sea. While we expect COVID-19 to negatively impact certain aspects of our business, given the rapid and evolving nature of the virus and the uncertainty about its impact on society and the global economy, we cannot predict the extent to which it will affect our global operations.

We are subject to various risks relating to international activities that could affect our overall profitability.    We manufacture substantially all of our products outside the United States and sell a significant portion of our products in non-U.S. markets. Sales in combined Europe, Asia and other markets accounted for approximately 39% and 38% of our net revenues in the years ended June 30, 2021 and June 30, 2020 respectively. Our sales and operations outside of the U.S. are subject to several difficulties and risks that are separate and distinct from those we face in the U.S., including:

fluctuations in currency exchange rates;

tariffs and other trade barriers;

compliance with foreign medical device manufacturing regulations;

difficulty in enforcing agreements and collecting receivables through foreign legal systems;

reduction in third-party payor reimbursement for our products;

inability to obtain import licenses;

the impact of public health epidemics/pandemics on the global economy, such as COVID-19 that has spread globally;

changes in trade policies and in U.S. and foreign tax policies;

possible changes in export or import restrictions; and

the modification or introduction of other governmental policies with potentially adverse effects.

Any of the above factors may have a material adverse effect on our ability to increase or maintain our non-U.S. sales.

Our products are the subject of clinical trials conducted by us, our competitors, or other third parties, the results of which may be unfavorable, or perceived as unfavorable, and could have a material adverse effect on our business, financial condition, and results of operations.    As a part of the regulatory process to obtain marketing clearance for new products and new indications for existing products, or for other reasons, we conduct and participate in numerous clinical trials with a variety of study designs, patient populations, and trial endpoints. We, our competitors, or other third parties may also conduct clinical trials involving our commercially marketed products. The results of clinical trials may be unfavorable or inconsistent with previous findings, or could identify safety signals associated with our products. Current or future clinical trials may not meet primary endpoints, may reveal disadvantages of our products and solutions for various markets we address, or could generate unfavorable or inconsistent clinical data. Clinical data, or the market’s or regulatory bodies’ perception of the clinical data, may adversely impact our ability to obtain product clearances or approvals, and our position in, and share of, the markets in which we participate. Moreover, if these clinical trials identify serious safety issues associated with our marketed products, potentially adverse consequences could result, including that regulatory authorities could withdraw clearances or approvals of our products, we could be required to halt the marketing and sales of our products or recall our products, we could be required to update our product labeling with additional warnings, we could be sued and held liable for harm caused to patients, and our reputation may suffer. Any of these could have a material adverse impact on our business, financial condition, and results of operations.

 

-24-


Table of Contents

 

PART I

Item 1A

 

RESMED INC. AND SUBSIDIARIES

 

We are subject to potential product liability claims that may exceed the scope and amount of our insurance coverage, which would expose us to liability for uninsured claims.    We are subject to potential product liability claims as a result of the design, manufacture and marketing of medical devices. Any product liability claim brought against us, with or without merit, could result in the increase of our product liability insurance rates. In addition, we would have to pay any amount awarded by a court in excess of our policy limits. Our insurance policies have various exclusions, and thus we may be subject to a product liability claim for which we have no insurance coverage, in which case, we may have to pay the entire amount of any award. We cannot assure you that our insurance coverage will be adequate or that all claims brought against us will be covered by our insurance and we cannot assure you that we will be able to obtain insurance in the future on terms acceptable to us or at all. A successful product liability claim brought against us in excess of our insurance coverage, if any, may require us to pay substantial amounts, which could harm our business. We may also be affected by the product recalls and other risks associated with the products of our competitors if customers and patients are uncertain if issues affecting our competitors may also affect us.

Our intellectual property may not protect our products, and/or our products may infringe on the intellectual property rights of third-parties.    We rely on a combination of patents, trade secrets and non-disclosure agreements to protect our intellectual property. Our success depends, in part, on our ability to obtain and maintain U.S. and foreign patent protection for our products, their uses and our processes to preserve our trade secrets and to operate without infringing on the proprietary rights of third-parties. We have a number of pending patent applications, and we do not know whether any patents will issue from any of these applications. We do not know whether any of the claims in our issued patents or pending applications will provide us with any significant protection against competitive products or otherwise be commercially valuable. Legal standards regarding the validity of patents and the proper scope of their claims are still evolving, and there is no consistent law or policy regarding the valid breadth of claims. Additionally, there may be third-party patents, patent applications and other intellectual property relevant to our products and technology which are not known to us and that block or compete with our products. We face the risks that:

third-parties will infringe our intellectual property rights;

our non-disclosure agreements will be breached;

we will not have adequate remedies for infringement;

our trade secrets will become known to or independently developed by our competitors;

third-parties will be issued patents that may prevent the sale of our products or require us to license and pay fees or royalties in order for us to be able to market some of our products; or

third-parties may assert patents and other intellectual property rights against our suppliers, causing interruption in supply of components or other essential inputs.

Litigation may be necessary to enforce patents issued to us, to protect our proprietary rights, or to defend third-party claims that we have infringed on proprietary rights of others. If the outcome of any litigation or proceeding brought against us were adverse, we could be subject to significant liabilities to third-parties, could be required to obtain licenses from third-parties, could be forced to design around the patents at issue or could be required to cease sales of the affected products. A license may not be available at all or on commercially viable terms, and we may not be able to redesign our products to avoid infringement. Additionally, the laws regarding the enforceability of patents vary from country to country, and we cannot assure you that any patent issues we face will be uniformly resolved, or that local laws will provide us with consistent rights and benefits.

If we fail to attract, develop and retain key employees our business may suffer.    Our ability to compete effectively depends on our ability to attract and retain key employees, including people in senior management, sales, marketing, technology, and research and development positions. Competition for top talent in the healthcare, technology and SaaS industries can be intense. Our ability to recruit and retain such talent will depend on a number of factors, including hiring practices of our competitors, compensation and benefits, work location, work environment and industry economic conditions. If we cannot effectively recruit, develop and retain qualified employees to drive our strategic goals, our business could suffer.

Our leverage and debt service obligations could adversely affect our business.    As of June 30, 2021, our total consolidated debt was $0.7 billion and we may incur additional indebtedness in the future. Our indebtedness could have adverse consequences, including:

making it more difficult to satisfy our financial obligations;

increasing our vulnerability to adverse economic, regulatory and industry conditions;

limiting our ability to compete and our flexibility in planning for, or reacting to, changes in our business and the industry in which we operate;

 

-25-


Table of Contents

 

PART I

Item 1A

 

RESMED INC. AND SUBSIDIARIES

 

limiting our ability to borrow additional funds for working capital, capital expenditure, acquisitions and general corporate or other purposes; and

exposing us to greater interest rate risk.

Our debt service obligations will require us to use a portion of our operating cash flow to pay interest and principal in indebtedness, which could impede our growth. Our ability to make payments on, and to refinance, our indebtedness, and to fund capital expenditures will depend on our ability to generate cash in the future. This is subject to general economic, financial, competitive, legislative, regulatory, and other factors, many of which are beyond our control.

Risks Related to Manufacturing, IT Systems, Commercial Operations and Plans for Future Growth

Disruptions in the supply of components from our suppliers could result in a significant reduction in sales and profitability.    We purchase configured components for our devices from various suppliers, including some who are single-source suppliers for us. Disruptions to our suppliers, including disruptions in connection with COVID-19, may limit our ability to manufacture our devices in a timely or cost-effective manner, which could result in a significant reduction in sales and profitability. We cannot assure you that a replacement supplier would be able to configure its components for our devices on a timely basis or, in the alternative, that we would be able to reconfigure our devices to integrate the replacement part. A reduction or halt in supply while a replacement supplier reconfigures its components, or while we reconfigure our devices for the replacement part, would limit our ability to manufacture our devices in a timely or cost-effective manner, which could result in a significant reduction in sales and profitability. We cannot assure you that our inventories would be adequate to meet our production needs during any prolonged interruption of supply.

In particular, a global semiconductor supply shortage is having wide-ranging effects across multiple industries, and it has impacted suppliers that incorporate semiconductors into the parts they supply to us. The semiconductor supply shortage has had, and will continue to have, an adverse impact on lead times and device production. Extended lead times and decreased availability of key components may also cause an adverse effect on our financial condition or results of operations. Delays in our ability to produce and deliver our devices could cause our customers to purchase alternative products from our competitors. If component shortages continue, we will continue to experience supply interruption and/or may incur significant price increases from these suppliers.

Additionally, increases in product demand, including in response to a recent product recall by one of our competitors, Philips, have resulted and could continue to result in shipment delays, higher costs for materials and components, and increased expenditures for freight and other expenses, which have and could continue to negatively impact our profit margins. Although historically we have generally been able to secure additional supply or take other actions to mitigate supply disruptions, as the impact of the global shortages in key components, including semiconductors, impacts many industries worldwide, and particularly our supply chain, we could experience a material adverse effect on our business, results of operations, and financial condition. In addition, in order to secure such necessary components, we may be obligated to purchase them at prices that are higher than those available in the current market. If supply constraints continue, our ability to meet demand and our corresponding ability to sell affected products may be materially reduced. We may have to allocate or prioritize orders for our devices, and our failure to timely deliver desirable products to meet demand may harm relationships with our customers.

We are increasingly dependent on information technology systems and infrastructure.    Our technology systems are potentially vulnerable to breakdown or other interruption by fire, power loss, system malfunction, unauthorized access and other events. Likewise, data privacy breaches by employees and others with both permitted and unauthorized access to our systems may pose a risk that sensitive data may be exposed to unauthorized persons or to the public, or may be permanently lost. While we have invested heavily in the protection of data and information technology and in related training, there can be no assurance that our efforts will prevent significant breakdowns, breaches in our systems or other cyber incidents that could have a material adverse effect upon the reputation, business, operations or financial condition of the company. In addition, significant implementation issues may arise as we continue to consolidate and outsource certain computer operations and application support activities.

 

-26-


Table of Contents

 

PART I

Item 1A

 

RESMED INC. AND SUBSIDIARIES

 

Actual or attempted breaches of security, unauthorized disclosure of information, denial of service attacks or the perception that personal and/or other sensitive or confidential information in our possession is not secure, could result in a material loss of business, substantial legal liability or significant harm to our reputation.    We receive, collect, process, use and store a large amount of information from our clients, our patients and our own employees, including personally identifiable, protected health and other sensitive and confidential information. This data is often accessed by us through transmissions over public and private networks, including the Internet. The secure transmission of such information over the Internet and other mechanisms is essential to maintain confidence in our information technology systems. We have implemented security measures, technical controls and contractual precautions designed to identify, detect and prevent unauthorized access, alteration, use or disclosure of our clients’, patients’ and employees’ data. However, the techniques used in these attacks change frequently and may be difficult to detect for periods of time and we may face difficulties in anticipating and implementing adequate preventative measures. As a result of the COVID-19 pandemic, we may face increased cybersecurity risks due to our reliance on internet technology and the number of our employees who are working remotely, which may create additional opportunities for cybercriminals to exploit vulnerabilities. Beyond external criminal activity, systems that access or control access to our services and databases may be compromised as a result of human error, fraud or malice on the part of employees or third parties, or may result from accidental technological failure. Because the techniques used to circumvent security systems can be highly sophisticated and change frequently, often are not recognized until launched against a target and may originate from less regulated and remote areas around the world, we may be unable to proactively address all possible techniques or implement adequate preventive measures for all situations.

If someone is able to circumvent or breach our security systems, they could steal any information located therein or cause serious and potentially long lasting disruption to our operations. Security breaches or attempts thereof could also damage our reputation and expose us to a risk of monetary loss and/or litigation, fines and sanctions. We also face risks associated with security breaches affecting third parties that conduct business with us or our clients and others who interact with our data. While we maintain insurance that covers certain security and privacy breaches, we may not carry appropriate insurance or maintain sufficient coverage to compensate for all potential liability.

We are subject to diverse laws and regulations relating to data privacy and security, including HIPAA and European data privacy laws. Complying with these numerous and complex regulations is expensive and difficult, and failure to comply with these regulations could result in regulatory scrutiny, fines, civil liability or damage to our reputation. In addition, any security breach or attempt thereof could result in liability for stolen assets or information, additional costs associated with repairing any system damage, incentives offered to clients or other business partners to maintain business relationships after a breach, and implementation of measures to prevent future breaches, including organizational changes, deployment of additional personnel and protection technologies, employee training and engagement of third-party experts and consultants. Additionally, the costs incurred to remediate any data security or privacy incident could be substantial.

We cannot assure you that any of our third-party service providers with access to our, or our clients, patients and/or employees’ personally identifiable and other sensitive or confidential information will maintain appropriate policies and practices regarding data privacy and security in compliance with all applicable laws or that they will not experience data security breaches or attempts thereof, which could have a corresponding effect on our business.

We may not be able to realize the anticipated benefits from acquisitions, which could adversely affect our operating results.    Part of our growth strategy includes acquiring businesses consistent with our commitment to innovation in developing products for the diagnosis and treatment of sleep apnea and respiratory care as well as our SaaS business. For example, we acquired MatrixCare in November 2018 and Propeller Health in January 2019. The success of our acquisitions will depend, in part, on our ability to successfully integrate the business and operations of the acquired companies. Additionally, our management may have their attention diverted while trying to integrate these businesses. If we are not able to successfully integrate the operations, we may not realize the anticipated benefits of the acquisitions fully or at all, or may take longer to realize than expected.

Moreover, we have recorded intangible assets, including goodwill, in connection with our acquisitions. At least on an annual basis, we must evaluate whether facts and circumstances indicate any impairment of the intangible assets’ values. The qualitative and quantitative analysis used to test goodwill is dependent upon various considerations and assumptions, including macroeconomic conditions, industry and market characteristics, projections of acquired companies’ future revenue, discount rates, and expectations of future cash flows. While we have made such assumptions in good faith and believe them to be reasonable, the assumptions may turn out to be materially inaccurate, including for reasons beyond our control. Changes in such assumptions may cause a change in circumstances indicating that the carrying value of intangible assets may be impaired. Consequently, we may be required to record a significant charge to earnings in the financial statements during the period in which any impairment of intangible assets is determined.

 

-27-


Table of Contents

 

PART I

Item 1A

 

RESMED INC. AND SUBSIDIARIES

 

Our business depends on our ability to market effectively to dealers of home healthcare products and sleep clinics.    We market our products primarily to home healthcare dealers and to sleep clinics that diagnose OSA and other sleep disorders, as well as to non-sleep specialist physician practices that diagnose and treat sleep disorders. We believe that these groups play a significant role in determining which brand of product a patient will use. The success of our business depends on our ability to market effectively to these groups to ensure that our products are properly marketed and sold by these third-parties.

We have limited resources to market to the sleep clinics, home healthcare dealer branch locations and to the non-sleep specialists, most of whom use, sell or recommend several brands of products. In addition, home healthcare dealers have experienced price pressures as government and third-party reimbursement has declined for home healthcare products, and home healthcare dealers are requiring price discounts and longer periods of time to pay for products purchased from us. We cannot assure you that physicians will continue to prescribe our products, or that home healthcare dealers or patients will not substitute competing products when a prescription specifying our products has been written.

We have expanded our marketing activities in some markets to target the population with a predisposition to sleep-disordered breathing as well as primary care physicians and various medical specialists. We cannot assure you that these marketing efforts will be successful in increasing awareness or sales of our products.

Our SaaS business depends substantially on customers entering into, renewing, upgrading and expanding their agreements for cloud services, term licenses, and maintenance and support agreements with us. Any decline in our customer renewals, upgrades or expansions could adversely affect our future operating results.    We typically enter into term-based agreements for our licensed on-premises offerings, cloud services, and maintenance and support services, which customers have discretion to renew or terminate at the end of the initial term. In order for us to improve our operating results, it is important that new customers enter into renewable agreements, and our existing customers renew, upgrade and expand their term-based agreements when the initial contract term expires. Our customers have no obligation to renew, upgrade or expand their agreements with us after the terms have expired. Our customers’ renewal, upgrade and expansion rates may decline or fluctuate as a result of a number of factors, including their satisfaction or dissatisfaction with our offerings, our pricing, the effects of general economic conditions, competitive offerings or alterations or reductions in our customers’ spending levels. If our customers do not renew, upgrade or expand their agreements with us or renew on terms less favorable to us, our revenues may decline.

If our SaaS products fail to perform properly or if we fail to develop enhancements, we could lose customers, become subject to service performance or warranty claims and our market share could decline.    Our SaaS operations are dependent upon our ability to prevent system interruptions and, as we continue to grow, we will need to devote additional resources to improving our infrastructure in order to maintain the performance of our products and solutions. The applications underlying our SaaS products are inherently complex and may contain material defects or errors, which may cause disruptions in availability or other performance problems. We have from time to time found defects in our products and may discover additional defects in the future that could result in data unavailability, unauthorized access to, loss, corruption or other harm to our customers’ data. While we implement bug fixes and upgrades as part of our regularly scheduled system maintenance, we may not be able to detect and correct defects or errors before implementing our products and solutions. Consequently, we or our customers may discover defects or errors after our products and solutions have been deployed. If we fail to perform timely maintenance, or if customers are otherwise dissatisfied with the frequency and/or duration of our maintenance services and related system outages, our existing customers could elect not to renew their contracts, delay or withhold payment, or potential customers may not adopt our products and solutions and our brand and reputation could be harmed. In addition, the occurrence of any material defects, errors, disruptions in service or other performance problems with our software could result in warranty or other legal claims against us and diversion of our resources. The costs incurred in addressing and correcting any material defects or errors in our software and expanding our infrastructure and architecture in order to accommodate increased demand for our products and solutions may be substantial and could adversely affect our operating results.

If there are interruptions or performance problems associated with our technology or infrastructure, our existing SaaS customers may experience service outages, and our new customers may experience delays in the deployment of our platforms.    We depend on services from various third parties as well as our own technical operations infrastructure to distribute our SaaS products via the Internet. If a service provider fails to provide sufficient capacity to support our platform or otherwise experiences service outages, such failure could interrupt our customers’ access to our service, which could adversely affect their perception of our platform's reliability and our revenues. Any disruptions in these services, including as a result of actions outside of our control, would significantly impact the continued performance of our SaaS products. In the future, these services may not be available to us on commercially reasonable terms, or at all. Any loss of the right to use any of these services could result in decreased functionality of our SaaS products until equivalent technology is either developed by us or, if available from another provider, is identified, obtained and integrated into our infrastructure.

 

-28-


Table of Contents

 

PART I

Item 1A

 

RESMED INC. AND SUBSIDIARIES

 

To meet our business needs, we must maintain sufficient excess capacity in our operations infrastructure to ensure that our SaaS products are accessible. Design and mechanical errors, spikes in usage volume and failure to follow system protocols and procedures could cause our systems to fail, resulting in interruptions in our SaaS products. Any interruptions or delays in our service, whether or not caused by our products, or as a result of third-party error, our own error, natural disasters or security breaches, whether accidental or willful, could harm our relationships with customers and cause our revenue to decrease and/or our expenses to increase.

Any of the above circumstances or events may harm our reputation, cause customers to terminate their agreements with us, impair our ability to obtain contract renewals from existing customers, impair our ability to grow our customer base, result in the expenditure of significant financial, technical and engineering resources, subject us to financial penalties and liabilities under our service level agreements, and otherwise harm our business, results of operations and financial condition.

If we are unable to support our continued growth, our business could suffer.    As we continue to grow, the complexity of our operations increases, placing greater demands on our management. Our ability to manage our growth effectively depends on our ability to implement and improve our financial and management information systems on a timely basis and to effect other changes in our business including the ability to monitor and improve manufacturing systems, information technology, and quality and regulatory compliance systems, among others. Unexpected difficulties during expansion, the failure to attract and retain qualified employees, the failure to successfully replace or upgrade our management information systems, the failure to manage costs or our inability to respond effectively to growth or plan for future expansion could cause our growth to stop. If we fail to manage our growth effectively and efficiently, our costs could increase faster than our revenues and our business results could suffer.

If a natural or man-made disaster strikes our manufacturing facilities, we will be unable to manufacture our products for a substantial amount of time and our sales and profitability will decline.    Our facilities and the manufacturing equipment we use to produce our products would be costly to replace and could require substantial lead-time to repair or replace. The facilities may be affected by natural or man-made disasters, including COVID-19 that has spread globally, and in the event they were affected by a disaster, we would be forced to rely on third-party manufacturers. Although we believe we possess adequate insurance for the disruption of our business from causalities, such insurance may not be sufficient to cover all of our potential losses and may not continue to be available to us on acceptable terms, or at all.

Risks Related to Non-Compliance with Laws, Regulations and Healthcare Industry Shifts

Healthcare reform may have a material adverse effect on our industry and our results of operations.    In March 2010, the ACA was signed into law in the United States. The ACA made changes that significantly impacted the healthcare industry, including medical device manufacturers. One of the principal purposes of the ACA was to expand health insurance coverage to millions of Americans who were uninsured. The ACA required adults not covered by an employer or government-sponsored insurance plan to maintain health insurance coverage or pay a penalty, a provision commonly referred to as the individual mandate.

The ACA also contained a number of provisions designed to generate the revenues necessary to fund the coverage expansions. This included new fees or taxes on certain health-related industries, including medical device manufacturers. Beginning in 2013, entities that manufacture, produce or import medical devices were required to pay an excise tax in an amount equal to 2.3% of the price for which such devices are sold in the United States. This excise tax was applicable to our products that are primarily used in hospitals and sleep labs, which includes the ApneaLink, VPAP Tx and certain Respiratory Care products. Through a series of legislative amendments, the tax was suspended beginning in 2016, and permanently repealed effective January 1, 2020. In addition to the competitive bidding changes discussed above, the ACA also included, among other things, directions to develop organizations that are paid under a new payment methodology for voluntary coordination of care by groups of providers, such as physicians and hospitals, and the establishment of a new Patient-Centered Outcomes Research Institute to oversee, identify priorities in and conduct comparative clinical effectiveness research. The increased funding and focus on comparative clinical effectiveness research, which compares and evaluates the risks and benefits, clinical outcomes, effectiveness and appropriateness of products, may result in lower reimbursements by payors for our products and decreased profits to us.

Other federal legislative changes have been proposed and adopted since the ACA was enacted. These changes included an aggregate reduction in Medicare payments to providers of 2% per fiscal year, which went into effect on April 1, 2013. The CARES Act, which was signed into law in March 2020 and subsequently amended, suspended the payment reductions from May 1, 2020 through December 31, 2020, and extended the sequester by one additional year, through 2030. In addition, on January 2, 2013, the American Taxpayer Relief Act of 2012, was signed into law, which, among other things, further reduced Medicare payments to several providers, including hospitals, and increased the statute of limitations period for the government to recover overpayments to providers from three to five years.

 

-29-


Table of Contents

 

PART I

Item 1A

 

RESMED INC. AND SUBSIDIARIES

 

The full impact on our business of the ACA and other new laws is uncertain. Nor is it clear whether other legislative changes will be adopted, if any, or how such changes would affect the demand for our products. Future actions by the administration and the U.S. Congress including, but not limited to, repeal or replacement of the ACA could have a material adverse impact on our results of operations or financial condition. Additionally, all or a portion of the ACA and related subsequent legislation may be modified, repealed or otherwise invalidated through other judicial challenge. On June 17, 2021, the U.S. Supreme Court dismissed the most recent judicial challenge to the ACA brought by several states without specifically ruling on the constitutionality of the ACA. Prior to the Supreme Court’s decision, President Biden issued an executive order to initiate a special enrollment period for purposes of obtaining health insurance coverage through the ACA marketplace, which began on February 15, 2021 and remained open through August 15, 2021. The executive order also instructed certain governmental agencies to review and reconsider their existing policies and rules that limit access to healthcare, including among others, reexamining Medicaid demonstration projects and waiver programs that include work requirements, and policies that create unnecessary barriers to obtaining access to health insurance coverage through Medicaid or the ACA. It is unclear how other healthcare reform measures of the Biden administration or other efforts, if any, to challenge, repeal or replace the ACA will impact the ACA or our business.

Various healthcare reform proposals have also emerged at the state level within the United States. The ACA as well as other federal and/or state healthcare reform measures that may be adopted in the future, singularly or in the aggregate, could have a material adverse effect on our business, financial condition and results of operations.

Government and private insurance plans may not adequately reimburse our customers for our products, which could result in reductions in sales or selling prices for our products.    Our ability to sell our products depends in large part on the extent to which coverage and adequate reimbursement for our products will be available from government health administration authorities, private health insurers and other organizations. These third-party payers are increasingly challenging the prices charged for medical products and services and can, without notice, deny coverage for our products or treatments that may include the use of our products. Therefore, even if a product is approved for marketing, we cannot make assurances that coverage and reimbursement will be available for the product, that the reimbursement amount will be adequate or that the reimbursement amount, even if initially adequate, will not be subsequently reduced. For example, in some markets, such as Spain, France and Germany, government coverage and reimbursement are currently available for the purchase or rental of our products but are subject to constraints such as price controls or unit sales limitations. In other markets, such as Australia, there is currently limited or no reimbursement for devices that treat sleep apnea conditions. As we continue to develop new products, those products will generally not qualify for coverage and reimbursement until they are approved for marketing, if at all.

In the United States, we sell our products primarily to home healthcare dealers, hospitals and sleep clinics. Reductions in reimbursement to our customers by third-party payers, if they occur, may have a material impact on our customers and, therefore, may indirectly affect our pricing and sales to, or the collectability of receivables we have from, those customers. A development negatively affecting reimbursement stems from the Medicare competitive bidding program mandated by the Medicare Prescription Drug, Improvement, and Modernization Act of 2003 (MMA). Under the program, our customers who provide DME must compete to offer products in designated competitive bidding areas, or CBAs. In addition, under the ACA, in 2016, CMS adjusted the prices in non-competitive bidding areas to match competitive bidding prices. CMS phased in the new rates beginning January 1, 2016, and were fully effective July 1, 2016. This program has significantly reduced the Medicare reimbursement to our customers compared with reimbursement in 2011, at the beginning of the program. The 21st Century Cures Act retroactively adjusted rates in non-bid areas to allow for the higher phase-in rates to be paid for items furnished between July 1, 2016 and December 31, 2016, rather than the lower fully-adjusted rates. Rules issued by CMS in 2018 resumed the higher phase-in rates in rural and non-contiguous non-competitive bidding areas for items furnished between June 1, 2018 and December 31, 2020. Pursuant to the CARES Act, these higher phase-in rates were extended through December 31, 2020, or through the end of the COVID-19 public health emergency, and were implemented in areas other than rural areas and noncontiguous areas for the same period. On March 7, 2019, CMS announced it would initiate a new round of competitive bidding, named Round 2021, with contracts effective on January 1, 2021 through December 31, 2023. In addition to adopting new bidding processes, CMS expanded the product categories included in competitive bidding to include non-invasive ventilators. However, due to the COVID-19 pandemic, CMS removed NIVs from Round 2021 of the DMEPOS Competitive Bidding Program. CPAP, and respiratory assist devices, and related supplies and accessories, which had been included in prior rounds of competitive bidding, were included in the 15 remaining product categories that were bid for in Round 2021. However, CMS did not award competitive bidding contracts for any product categories other than OTS back and knee braces. Payment for items where contracts were not awarded – including CPAP and respiratory assist devices – will be based on adjusted fee schedule amounts. At this time, we cannot predict the full impact the competitive bidding program and the developments in the competitive bidding program will have on our business and financial condition. If changes are made to this program in the future, it could affect amounts being recovered by our customers.

 

-30-


Table of Contents

 

PART I

Item 1A

 

RESMED INC. AND SUBSIDIARIES

 

In addition, our products are the subject of periodic studies by third party agencies, including the Agency for Healthcare Research and Quality in the United States, intended to review the comparative effectiveness of different treatments of the same illness. Although the results of comparative effectiveness studies are not intended to mandate any reimbursement policies for public or private payers, it is not clear what, if any, effect such research will have on the sales of our products. Decreases in third-party reimbursement for our products or a decision by a third-party payer to not cover our products as a result of a third-party study could have a material adverse effect on our sales, results of operations and financial condition.

Failure to comply with anti-kickback and fraud regulations could result in substantial penalties and changes in our business operations.    Although in the United States we do not provide healthcare services, submit claims for third-party reimbursement, or receive payments directly from Medicare, Medicaid or other third-party payors for our products, we are subject to healthcare fraud and abuse regulation and enforcement by federal, state and foreign governments, which could significantly impact our business. We also are subject to foreign fraud and abuse laws, which vary by country.

In the United States, the laws that may affect our ability to operate include, but are not limited to:

the federal Anti-Kickback Statute, which prohibits, among other things, persons and entities from knowingly and willfully soliciting, receiving, offering, or paying remuneration, directly or indirectly, in cash or in kind, in exchange for or to induce either the referral of an individual for, or the purchase, lease, order or recommendation of, any good, facility, item or service for which payment may be made, in whole or in part, under federal healthcare programs such as Medicare and Medicaid. A person or entity does not need to have actual knowledge of this statute or specific intent to violate the Anti-Kickback Statute itself to have committed a violation. The U.S. government has interpreted this law broadly to apply to the marketing and sales activities of manufacturers, distributors and revenue cycle management companies like us. Violations of the federal Anti-Kickback Statute may result in significant civil monetary penalties for each violation, plus up to three times the remuneration involved. Violations of the Federal Anti-Kickback Statute can also result in significant criminal penalties and imprisonment;

federal civil and criminal false claims laws, including the False Claims Act, and civil monetary penalty laws, that prohibit, among other things, knowingly presenting, or causing to be presented, claims for payment or approval to the federal government that are false or fraudulent, knowingly making a false statement material to an obligation to pay or transmit money or property to the federal government or knowingly concealing or knowingly and improperly avoiding or decreasing an obligation to pay or transmit money or property to the federal government. These laws may apply to manufacturers and distributors who provide information on coverage, coding, and reimbursement of their products to persons who do bill third-party payors. In addition, the government may assert that a claim including items or services resulting from a violation of the federal Anti-Kickback Statute constitutes a false or fraudulent claim for purposes of the federal civil False Claims Act. Violations can result in debarment, suspension or exclusion from participation in government healthcare programs, including Medicare and Medicaid. When an entity is determined to have violated the federal civil False Claims Act, the government may impose significant civil fines and penalties for each false claim, plus treble damages, and exclude the entity from participation in Medicare, Medicaid and other federal healthcare programs. 

HIPAA, which created federal criminal laws that prohibit executing a scheme to defraud any healthcare benefit program or making false statements relating to healthcare matters. A person or entity does not need to have actual knowledge of these statutes or specific intent to violate them to have committed a violation;

the federal Physician Sunshine Act requirements under the ACA, which impose reporting and disclosure requirements on device and drug manufacturers for any “transfer of value” made or distributed by certain manufacturers of drugs, devices, biologics, and medical supplies to physicians (including doctors, dentists, optometrists, podiatrists and chiropractors), teaching hospitals, and ownership and investment interests held by physicians and their immediate family members. Beginning in 2022, applicable manufacturers also will be required to report such information regarding payments and transfers of value provided during the previous year to physician assistants, nurse practitioners, clinical nurse specialists, certified nurse anesthetists, anesthesiology assistants and certified nurse midwives;

federal consumer protection and unfair competition laws, which broadly regulate marketplace activities and activities that potentially harm customers; and

state and foreign law equivalents of each of the above federal laws, such as state anti-kickback and false claims laws that may apply to items or services reimbursed by any third-party payor, including commercial insurers; state laws that require device companies to comply with the industry’s voluntary compliance guidelines and the relevant compliance guidance promulgated by the federal government, or otherwise restrict payments that may be made to healthcare providers and other potential referral sources; state laws that require device manufacturers to report information related to payments and other transfers of value to physicians and other healthcare providers or marketing expenditures.

 

-31-


Table of Contents

 

PART I

Item 1A

 

RESMED INC. AND SUBSIDIARIES

 

The scope and enforcement of these laws are uncertain and subject to rapid change in the current environment of healthcare reform, especially in light of the lack of applicable precedent and regulations. Federal and state enforcement bodies have recently increased their scrutiny of interactions between healthcare companies and healthcare providers, which has led to a number of investigations, prosecutions, convictions and settlements in the healthcare industry. Responding to investigations can be time-and resource-consuming and can divert management’s attention from the business. Additionally, as a result of these types of investigations, healthcare providers and entities may face litigation or have to agree to settlements that can include monetary penalties and onerous compliance and reporting requirements as part of a consent decree or corporate integrity agreement. Any such investigation or settlement could increase our costs or otherwise have an adverse effect on our business.

If our operations are found to be in violation of any of the laws described above or any other governmental regulations that apply to us now or in the future, we may be subject to penalties, including civil and criminal penalties, damages, fines, disgorgement, exclusion from governmental health care programs, additional compliance and reporting obligations, imprisonment and the curtailment or restructuring of our operations, any of which could adversely affect our ability to operate our business and our financial results.

In December 2019, we entered into a settlement agreement with the U.S. Department of Justice and the U.S. Attorneys’ Offices for the District Court of South Carolina, the Southern District of California, the Northern District of Iowa and the Eastern District of New York. The agreement resolved five lawsuits originally brought by whistleblowers under the qui tam provisions of the False Claims Act and allegations that we: (a) provided DME companies with free telephone call center services and other free patient outreach services that enabled these companies to order resupplies for their patients with sleep apnea, (b) provided sleep labs with free and below-cost positive airway pressure masks and diagnostic machines, as well as free installation of these machines, (c) arranged for, and fully guaranteed the payments due on, interest-free loans that DME supplies acquired from third-party financial institutions for the purchase of our equipment, and (d) provided non-sleep specialist physicians free home sleep testing devices referred to as “ApneaLink.” We agreed with the government to civilly resolve these matters for a payment of $39.5 million ($37.5 million to the federal government and $2 million to the various states) and we incurred additional fees and administrative costs that typically accompany such a resolution amounting to $1.1 million. The specific allegations and the resolution of those allegations are contained in the Company’s settlement agreement with the adverse parties. The total final costs relating to these matters was $40.6 million.

Contemporaneous with the civil settlement, we also entered into a five-year Corporate Integrity Agreement, or CIA, with the Department of Health and Human Services Office of Inspector General. The CIA required, among other things, that we implement additional controls around our product pricing and sales and that we conduct internal and external monitoring of our arrangements with referrals sources. The settlement agreement with the government and the CIA could result in reputational harm or the curtailment or restructuring of our operations, any of which could materially adversely affect our financial results and our ability to operate our business. In addition, our failure to comply with our obligations under the CIA could result in monetary penalties and our exclusion from participating in federal healthcare programs. The costs associated with compliance with the CIA, or any liability or consequences associated with its breach, could have an adverse effect on our operations, liquidity and financial condition.

Our use and disclosure of individually identifiable information, including health information, is subject to federal, state and foreign privacy and security regulations, and our failure to comply with those regulations or to adequately secure the information we hold could result in significant liability or reputational harm.    The privacy and security of personally identifiable information stored, maintained, received or transmitted electronically is a major issue in the U.S. and abroad. While we strive to comply with all applicable privacy and security laws and regulations, as well as our own posted privacy policies, legal standards for privacy, including but not limited to “unfairness” and “deception,” as enforced by the FTC and state attorneys general, continue to evolve and any failure or perceived failure to comply may result in proceedings or actions against us by government entities or others, or could cause us to lose audience and customers, which could have a material adverse effect on our business. Recently, there has been an increase in public awareness of privacy issues in the wake of revelations about the activities of various government agencies and in the number of private privacy-related lawsuits filed against companies. Concerns about our practices with regard to the collection, use, disclosure, security or deletion of personally identifiable information or other privacy-related matters, even if unfounded and even if we are in compliance with applicable laws, could damage our reputation and harm our business.

Numerous foreign, federal and state laws and regulations govern collection, dissemination, use and confidentiality of personally identifiable health information, including (i) state privacy and confidentiality laws (including state laws requiring disclosure of breaches); (ii) HIPAA; and (iii) European and other foreign data protection laws, including the GDPR.

 

-32-


Table of Contents

 

PART I

Item 1A

 

RESMED INC. AND SUBSIDIARIES

 

HIPAA establishes a set of national privacy and security standards for the protection of individually identifiable health information, or protected health information, by health plans, healthcare clearinghouses and healthcare providers that submit certain covered transactions electronically, or covered entities, and their “business associates,” which are persons or entities that perform certain services for, or on behalf of, a covered entity that involve creating, receiving, maintaining or transmitting protected health information, as well as their covered subcontractors. Certain portions of our business, such as the cloud-based software digital health applications, are subject to HIPAA as a business associate of our covered entity clients. To provide our covered entity clients with services that involve access to PHI, HIPAA requires us to enter into business associate agreements that require us to safeguard PHI in accordance with HIPAA. As a business associate, we are also directly liable for compliance with HIPAA. Penalties for violations of HIPAA regulations include civil and criminal penalties.

HIPAA authorizes state attorneys’ general to file suit under HIPAA on behalf of state residents. Courts can award damages, costs and attorneys’ fees related to violations of HIPAA in such cases. While HIPAA does not create a private right of action allowing individuals to sue us in civil court for HIPAA violations, its standards have been used as the basis for a duty of care claim in state civil suits such as those for negligence or recklessness in the misuse or breach of PHI.

HIPAA further requires business associates like us to notify our covered entity clients “without unreasonable delay and in no case later than 60 calendar days after discovery of the breach.” Covered entities must notify affected individuals “without unreasonable delay and in no case later than 60 calendar days after discovery of the breach” if their unsecured PHI is subject to an unauthorized access, use or disclosure. If a breach affects 500 patients or more, covered entities must report it to HHS and local media without unreasonable delay, and HHS will post the name of the breaching entity on its public website. If a breach affects fewer than 500 individuals, the covered entity must log it and notify HHS at least annually.

If we are unable to properly protect the privacy and security of health information entrusted to us, our solutions may be perceived as not secure, we may incur significant liabilities and customers may curtail their use of or stop using our solutions. In addition, if we fail to comply with the terms of our business associate agreements with our clients, we are liable not only contractually but also directly under HIPAA.

In addition, the California Consumer Privacy Act of 2018, or CCPA, became effective on January 1, 2020. The CCPA gives California residents expanded rights to access and delete their personal information, opt out of certain personal information sharing and receive detailed information about how their personal information is used by requiring covered companies to provide new disclosures to California consumers (as that term is broadly defined) and provide such consumers new ways to opt-out of certain sales of personal information. The CCPA includes civil penalties for violations, as well as a private right of action for data breaches that is expected to increase data breach litigation. Although the law includes limited exceptions, including for “protected health information” maintained by a covered entity or business associate, it may regulate or impact our processing of personal information depending on the context. CCPA’s implementation standards and enforcement practices are likely to remain uncertain for the foreseeable future, and the CCPA may increase our compliance costs and potential liability. Further, the California Privacy Rights Act, or CPRA, was recently passed in California and not only revises but expands upon CCPA. The CPRA will impose additional data protection obligations on covered businesses, including additional consumer rights processes, limitations on data uses, new audit requirements for higher risk data, and opt outs for certain uses of sensitive data. It will also create a new California data protection agency authorized to issue substantive regulations and could result in increased privacy and information security enforcement. The majority of the provisions will go into effect on January 1, 2023, will supersede the CCPA, and additional compliance investment and potential business process changes may be required. In the event that we are subject to or affected by HIPAA, the CCPA, the CPRA or other domestic privacy and data protection law, any liability from failure to comply with the requirements of these laws could adversely affect our financial condition.

We are also subject to laws and regulations in non-U.S. countries covering data privacy and the protection of health-related and other personal information. For example, EU member states and other jurisdictions have adopted data protection laws and regulations, which impose significant compliance obligations. Laws and regulations in these jurisdictions apply broadly to the collection, use, storage, disclosure and security of personal information that identifies or may be used to identify an individual, such as names, contact information, and sensitive personal data such as health data. These laws and regulations are subject to frequent revisions and differing interpretations and have generally become more stringent over time.

In addition, the GDPR went into effect in May 2018. The GDPR imposes stringent data protection requirements for the processing of personal data in the European Economic Area, or EEA. The GDPR imposes several stringent requirements for controllers and processors of personal data, and increased our obligations, for example, by imposing higher standards for obtaining consent from individuals to process their personal data, requiring more robust disclosures to individuals, strengthening individual data rights, shortening timelines for data breach notifications, limiting retention periods and secondary use of information (including for research purposes), increasing requirements pertaining to health data and pseudonymized (i.e., key-coded) data and imposing additional obligations when we contract with third party processors in connection with the processing of the personal data. The GDPR also imposes strict rules on the transfer

 

-33-


Table of Contents

 

PART I

Item 1A

 

RESMED INC. AND SUBSIDIARIES

 

of personal data out of the EEA, including to the United States, and recent legal developments in Europe have created complexity and uncertainty regarding such transfers of personal data from the EEA to the United States. For example, on July 16, 2020, the Court of Justice of the European Union, or CJEU, invalidated the EU-US Privacy Shield Framework, or Privacy Shield, under which personal data could be transferred from the EEA to United States entities that had self-certified under the Privacy Shield scheme. While the CJEU upheld the adequacy of the standard contractual clauses (a standard form of contract approved by the European Commission as an adequate personal data transfer mechanism, and potential alternative to the Privacy Shield), the CJEU ruled that the underlying data transfers must be assessed on a case-by-case basis by the data controller to determine whether the personal data will be adequately protected. As a result, on June 4, 2021 the European Commission published a decision adopting an updated set of new standard contractual clauses designed to address issues identified by the CJEU. Existing data transfers that rely on the old standard contractual clauses can continue to be used until December 27, 2022 and the use of the new standard contractual clauses will still need to be assessed on a case-by-case basis taking into account the legal regime applicable in the destination country, in particular applicable surveillance laws and rights of individuals. The exact scope and applicability of the new standard contractual clauses is currently unclear, particularly regarding transfers to parties outside the EEA who are already subject to the GDPR. We are awaiting further clarification from the European Commission and therefore the full scope of application of the standard contractual clauses remains subject to review and change as we get a better understanding from the European Commission and national regulators. European data protection law provides that EEA member states may make their own further laws and regulations limiting the processing of genetic, biometric or health data, which could limit our ability to use and share personal data or could cause our costs could increase, and harm our business and financial condition. The GDPR and other similar regulations impose additional conditions in order to satisfy such consent for electronic marketing, such as a prohibition on pre-checked tick boxes and bundled consents, thereby requiring customers to affirmatively consent for a given purpose through separate tick boxes or other affirmative action. Failure to comply with the requirements of GDPR and the applicable national data protection and marketing laws of the EEA member states may result in fines of up to €20,000,000 or up to 4% of the total worldwide annual turnover of the preceding financial year, whichever is higher, and other administrative penalties as well as individual claims for compensation.

In addition, from January 1, 2021, we have had to comply with the GDPR and United Kingdom GDPR, which, together with the amended United Kingdom Data Protection Act 2018, retains the GDPR in United Kingdom national law. The United Kingdom GDPR mirrors the fines under the GDPR, i.e., fines up to the greater of £17.5 million or 4% of global turnover. The relationship between the United Kingdom and the EU in relation to certain aspects of data protection law remains unclear, and it is unclear how United Kingdom data protection laws and regulations will develop in the medium to longer term. On June 28, 2021, the European Commission adopted an adequacy decision in favor of the United Kingdom, enabling data transfers from EU member states to the United Kingdom without additional safeguards. However, the United Kingdom adequacy decision will automatically expire in June 2025 unless the European Commission renews or extends that decision and remains under review by the Commission during this period.

Compliance with these and any other applicable privacy and data security laws and regulations is a rigorous and time-intensive process, and we may be required to put in place additional mechanisms ensuring compliance with the new data protection rules. Any failure or perceived failure by us to comply with privacy or security laws, policies, legal obligations or industry standards or any security incident that results in the unauthorized release or transfer of personally identifiable information may also result in governmental enforcement actions and investigations, fines and penalties, litigation and/or adverse publicity, including by consumer advocacy groups, and could cause our customers to lose trust in us, which could have an adverse effect on our reputation and business. Such failures could have a material adverse effect on our financial condition and operations. If the third parties we work with violate applicable laws, contractual obligations or suffer a security breach, such violations may also put us in breach of our obligations under privacy laws and regulations and/or could in turn have a material adverse effect on our business.

Our business activities are subject to extensive regulation, and any failure to comply could have a material adverse effect on our business, financial condition, or results of operations.    We are subject to extensive U.S. federal, state, local and international regulations regarding our business activities. Failure to comply with these regulations could result in, among other things, recalls of our products, substantial fines and criminal charges against us or against our employees. Furthermore, certain of our products could be subject to recall if the Food and Drug Administration, or the FDA, other regulators or we determine, for any reason, that those products are not safe or effective. Any recall or other regulatory action could increase our costs, damage our reputation, affect our ability to supply customers with the quantity of products they require and materially affect our operating results.

 

-34-


Table of Contents

 

PART I

Item 1A

 

RESMED INC. AND SUBSIDIARIES

 

Product sales, introductions or modifications may be delayed or canceled as a result of FDA regulations or similar foreign regulations, which could cause our sales and profits to decline.    Unless a product is exempt, before we can market or sell a new medical device in the United States, we must obtain FDA clearance or approval, which can be a lengthy and time-consuming process. We generally receive clearance from the FDA to market our products in the United States under Section 510(k) of the Federal Food, Drug, and Cosmetic Act or our products are exempt from the Section 510(k) clearance process. The 510(k) clearance process can be expensive, time-consuming and uncertain. In the 510(k) clearance process, the FDA must determine that a proposed device is “substantially equivalent” to a device legally on the market, known as a “predicate” device, with respect to intended use, technology and safety and effectiveness, in order to clear the proposed device for marketing. The FDA has a high degree of latitude when evaluating submissions and may determine that a proposed device submitted for 510(k) clearance is not substantially equivalent to a predicate device. After a device receives 510(k) premarket notification clearance from the FDA, any modification that could significantly affect its safety or effectiveness, or that would constitute a major change in the intended use of the device, technology, materials, packaging, and certain manufacturing processes may require a new 510(k) clearance or premarket approval. We have modified some of our Section 510(k) approved products without submitting new Section 510(k) notices, which we do not believe were required. However, if the FDA disagrees with us and requires us to submit new Section 510(k) notifications for modifications to our existing products, we may be required to stop marketing the products while the FDA reviews the Section 510(k) notification.

Any new product introduction or existing product modification could be subjected to a lengthier, more rigorous FDA examination process. For example, in certain cases we may need to conduct clinical trials of a new product before submitting a 510(k) notice. We may also be required to obtain premarket approvals for certain of our products. Indeed, recent trends in the FDA’s review of premarket notification submissions suggest that the FDA is often requiring manufacturers to provide new, more expansive, or different information regarding a particular device than what the manufacturer anticipated upon 510(k) submission. This has resulted in increasing uncertainty and delay in the premarket notification review process. For example, in November 2018, FDA officials announced steps that the FDA intended to take to modernize the 510(k) premarket notification pathway. Among other things, the FDA announced that it planned to develop proposals to drive manufacturers utilizing the 510(k) pathway toward the use of newer predicates. These proposals included plans to potentially sunset certain older devices that were used as predicates under the 510(k) clearance pathway, and to potentially publish a list of devices that have been cleared on the basis of demonstrated substantial equivalence to predicate devices that are more than 10 years old. In September 2019, the FDA also issued revised final guidance establishing a “Safety and Performance Based Pathway” for “manufacturers of certain well-understood device types” allowing manufacturers to rely on objective safety and performance criteria recognized by the FDA to demonstrate substantial equivalence, obviating the need for manufacturers to compare the safety and performance of their medical devices to specific predicate devices in the clearance process. The FDA has developed and maintains a list of device types appropriate for the “safety and performance based” pathway and continues to develop product-specific guidance documents that identify the performance criteria and recommended testing methodologies for each such device type, where feasible. Some of these proposals have not yet been finalized or adopted, although the FDA may work with Congress to implement such proposals through legislation. Accordingly, it is unclear the extent to which any proposals, if adopted, could impose additional regulatory requirements on us that could delay our ability to obtain new 510(k) clearances, increase the costs of compliance, or restrict our ability to maintain our current clearances, or otherwise create competition that may negatively affect our business.

The FDA’s ongoing review of the 510(k) program may make it more difficult for us to make modifications to our previously cleared products, either by imposing stricter requirements on when a manufacturer must submit a new 510(k) for a modification to a previously cleared product, or by applying more onerous review criteria to such submissions. FDA continues to review its 510(k) clearance process which could result in additional changes to regulatory requirements or guidance documents which could increase the costs of compliance or restrict our ability to maintain current clearances. The requirements of the more rigorous premarket approval process and/or significant changes to the 510(k) clearance process could delay product introductions and increase the costs associated with FDA compliance. Marketing and sale of our products outside the United States are also subject to regulatory clearances and approvals, and if we fail to obtain these regulatory approvals, our sales could suffer. We cannot assure you that any new products we develop will receive required regulatory approvals from U.S. or foreign regulatory agencies.

 

-35-


Table of Contents

 

PART I

Item 1A

 

RESMED INC. AND SUBSIDIARIES

 

We are subject to substantial regulation related to quality standards applicable to our manufacturing and quality processes. Our failure to comply with these standards could have an adverse effect on our business, financial condition, or results of operations.    The FDA regulates the approval, manufacturing, and sales and marketing of many of our products in the United States. Significant government regulation also exists in Canada, Japan, Europe, and other countries in which we conduct business. As a device manufacturer, we are required to register with the FDA and are subject to periodic inspection by the FDA for compliance with the FDA’s Quality System Regulation requirements, which require manufacturers of medical devices to adhere to certain regulations, including testing, quality control and documentation procedures. In addition, the federal Medical Device Reporting regulations require us to provide information to the FDA whenever there is evidence that reasonably suggests that a device may have caused or contributed to a death or serious injury or, if a malfunction were to occur, could cause or contribute to a death or serious injury. Compliance with applicable regulatory requirements is subject to continual review and is rigorously monitored through periodic inspections by the FDA. In the European Community, we are required to maintain certain ISO certifications in order to sell our products and must undergo periodic inspections by notified bodies to obtain and maintain these certifications. Failure to comply with current governmental regulations and quality assurance guidelines could lead to temporary manufacturing shutdowns, product recalls or related field actions, product shortages or delays in product manufacturing. Efficacy or safety concerns, an increase in trends of adverse events in the marketplace, and/or manufacturing quality issues with respect to our products could lead to product recalls or related field actions, withdrawals, and/or declining sales.

Disruptions at the FDA and other government agencies caused by funding shortages or global health concerns could hinder their ability to hire, retain or deploy key leadership and other personnel, or otherwise prevent new or modified products from being developed, cleared or approved or commercialized in a timely manner or at all, which could negatively impact our business.    The ability of the FDA to review and clear or approve new products can be affected by a variety of factors, including government budget and funding levels, statutory, regulatory, and policy changes, the FDA’s ability to hire and retain key personnel and accept the payment of user fees, and other events that may otherwise affect the FDA’s ability to perform routine functions. Average review times at the FDA have fluctuated in recent years as a result. In addition, government funding of other government agencies that fund research and development activities is subject to the political process, which is inherently fluid and unpredictable. Disruptions at the FDA and other agencies may also slow the time necessary for medical devices or modifications to cleared or approved medical devices to be reviewed and/or approved by necessary government agencies, which would adversely affect our business. For example, over the last several years, including for 35 days beginning on December 22, 2018, the U.S. government has shut down several times and certain regulatory agencies, such as the FDA, have had to furlough critical FDA employees and stop critical activities.

Separately, in response to the COVID-19 pandemic, on March 10, 2020, the FDA announced its intention to postpone most foreign inspections of manufacturing facilities, and subsequently, on March 18, 2020, the FDA temporarily postponed routine surveillance inspections of domestic manufacturing facilities. Regulatory authorities outside the United States may adopt similar restrictions or other policy measures in response to the COVID-19 pandemic. Subsequently, on July 10, 2020, the FDA announced its intention to resume certain on-site inspections of domestic manufacturing facilities subject to a risk-based prioritization system. The FDA intends to use this risk-based assessment system to identify the categories of regulatory activity that can occur within a given geographic area, ranging from mission critical inspections to resumption of all regulatory activities. If a prolonged government shutdown occurs, or if global health concerns continue to prevent the FDA or other regulatory authorities from conducting their regular inspections, reviews, or other regulatory activities, it could significantly impact the ability of the FDA or other regulatory authorities to timely review and process our regulatory submissions, which could have a material adverse effect on our business.

Off-label marketing of our products could result in substantial penalties.    The FDA strictly regulates the promotional claims that may be made about FDA-cleared products. In particular, clearance under Section 510(k) only permits us to market our products for the uses indicated on the labeling cleared by the FDA. We may request additional label indications for our current products, and the FDA may deny those requests outright, require additional expensive clinical data to support any additional indications or impose limitations on the intended use of any cleared products as a condition of clearance. If the FDA determines that we have marketed our products for off-label use, we could be subject to fines, injunctions or other penalties. It is also possible that other federal, state or foreign enforcement authorities might take action if they consider our business activities to constitute promotion of an off-label use, which could result in significant penalties, including, but not limited to, criminal, civil and administrative penalties, damages, fines, disgorgement, exclusion from participation in government healthcare programs, and the curtailment of our operations. Any of these events could significantly harm our business and results of operations and cause our stock price to decline.

 

-36-


Table of Contents

 

PART I

Item 1A

 

RESMED INC. AND SUBSIDIARIES

 

Laws regulating consumer contacts could adversely affect our business operations or create liabilities.    Our business activities include contacts with consumers in different parts of the world. Certain laws, such as the U.S. Telephone Consumer Protection Act, regulate telemarketing practices and certain automated outbound contacts with consumers, such as phone calls, texts or emails. Our use of outbound contacts may be restricted by existing laws, or by laws, regulations, or regulatory decisions that may be adopted in the future. Similarly, certain data privacy laws, including CCPA, and subsequently CPRA, and the GDPR require disclosure of our privacy practices to consumers. If we are found to have violated these laws or regulations, we may be subjected to substantial fines, penalties, or liabilities to consumers.

Tax laws, regulations, and enforcement practices are evolving and may have a material adverse effect on our results of operations, cash flows and financial position.    Tax laws, regulations, and administrative practices in various jurisdictions are evolving and may be subject to significant changes due to economic, political, and other conditions. There are many transactions that occur during the ordinary course of business for which the ultimate tax determination is uncertain, and significant judgment is required in evaluating and estimating our provision and accruals for taxes. Governments are increasingly focused on ways to increase tax revenues, particularly from multinational corporations, which may lead to an increase in audit activity and aggressive positions taken by tax authorities.

Changes or clarifications to U.S. tax laws could materially affect the tax treatment of our domestic and foreign earnings. The Organisation for Economic Co-operation and Development, an international association of 34 countries, including the United States, released the final reports from its Base Erosion and Profit Shifting, or BEPS, Action Plans, which aim to standardize and modernize global tax policies. The BEPS Action Plans propose revisions to numerous tax rules, including country-by-country reporting, permanent establishment, hybrid entities and instruments, transfer pricing, and tax treaties. The BEPS Action Plans have been or are being enacted by countries where we have operations. Additionally, the U.S. Treasury department recently proposed the adoption of a global minimum corporate tax rate of at least 15%, which, if enacted, could negatively impact our effective tax rate.

Developments in relevant tax laws, regulations, administrative practices and enforcement practices could have a material adverse effect on our operating results, financial position and cash flows, including the need to obtain additional financing.

We are subject to tax audits by various tax authorities in many jurisdictions.    Our income tax returns are based on calculations and assumptions that require significant judgment, and are subject to audit by various tax authorities. In addition, the calculation of our tax liabilities involves dealing with uncertainties in the application of complex tax laws. We regularly assess the potential outcomes of examinations by tax authorities in determining the adequacy of our provision for income taxes.

We are under audit by the Australian Taxation Office (the “ATO”) for the years 2009 to 2018 (the “Audit Period”). The audits primarily involve a transfer pricing dispute in which the ATO asserts we should have paid additional Australian taxes on income derived from our Singapore operations. The ATO issued Notices of Amended Assessments for the tax years 2009 to 2013 seeking a total of $266.0 million, consisting of $151.7 million in additional income tax and $114.3 million in penalties and interest. The 2014 to 2018 periods are still under audit and we have not yet received any Notices of Amended Assessments relative to those periods.

We are engaged in advanced discussions with the ATO to settle the dispute for the entire Audit Period. Given the stage of those discussions, during the year ended June 30, 2021, we recorded $395.3 million of gross unrecognized tax benefits, including $47.5 million of accrued interest and penalties. This amount reflects our estimate of the potential tax liability and is subject to change.