Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

[X]  ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(D) OF

THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended June 30, 2006

Commission file number: 001-15317

RESMED INC.

(Exact name of registrant as specified in its Charter)

Delaware

(State or other jurisdiction of incorporation or organization)

98-0152841

(IRS Employer Identification No.)

14040 Danielson Street

Poway, CA 92064-6857

United States of America

(Address of principal executive offices)

(858) 746-2400

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act

Title of each class

Common Stock, $.004 Par Value

Rights to Purchase Series A Junior

Participating Preferred Stock

Name of each exchange upon which registered

New York Stock Exchange

Securities registered pursuant to Section 12(g) of the Act

None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes [ x ]    No [  ]

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act.    Yes [  ]    No [x]

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes [ x ]    No [  ]

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulations S-K (S 229.405 of this Chapter) is not contained herein and will not be contained to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K [  ]

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, or a non-accelerated filer. See definition of “accelerated filer and large accelerated filer” in Rule 12b-2 of the Exchange Act.

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes [  ]    No [ x ]

The aggregate market value of the voting stock held by non-affiliates of registrant as of December 31, 2005 (the last business day of the registrant’s most recently completed second fiscal quarter), computed by reference to the closing sale price of such stock on the New York Stock Exchange, was approximately $2,632,489,000. (All directors, executive officers, and 10% stockholders of registrant are considered affiliates.)

At August 23, 2006, registrant had 75,932,458 shares of Common Stock, $.004 par value, issued and outstanding. This number excludes 2,254,918 shares held by the registrant as treasury shares.

Portions of registrant’s definitive Proxy Statement for its November 9, 2006 meeting of stockholders are incorporated by reference into Part III of this report.

Table of Contents

C^ONTENTS

Activa, ActiveCell, Adapt SV, Adaptiv, Aerial, Aero-Click, Aero-Fix, ApneaLink, AutoVPAP, AutoScan, AutoSet, AutoSet CS, AutoSet Spirit, AutoSet T, AutoSet Vantage, AutoSet.com, AutoSet-CS.com, AutoView, Bubble Cushion, Bubble Mask, Elisée, Eole, Escape, Helia, HumidAire, IPAP MAX, IPAP MIN, Kidsta, Magellan, MAP, MEPAL, Meridian, MESAM, minni Max, Mirage, Protégé, Moritz biLEVEL, Papillon, Poly-MESAM, ResCap, ResControl, ResMed, S6, S7, S8, SELFSET, SleepVantage, SmartStart, Spirit, Spiro+, Sullivan, Swift, T_iControl, Ultra Mirage, Vential, VPAP, VS Easyfit, are our trademarks.

As used in this 10-K, the terms “we”, “us”, “our” and “the Company” refer to ResMed Inc., a Delaware corporation, and its subsidiaries, on a consolidated basis, unless otherwise stated.

- 2 -

Table of Contents

PART I

Forward-Looking Statements

This report contains or may contain certain forward-looking statements and information that are based on the beliefs of our management as well as estimates and assumptions made by, and information currently available to our management. All statements other than statements regarding historical facts are forward-looking statements. The words “believe,” “expect,” “anticipate,” “estimate,” “plan,” “future” and other similar expressions generally identify forward-looking statements, including, in particular, statements regarding the development and approval of new products and product applications, market expansion, pending litigation and the development of new markets for our products, such as cardiovascular and stroke markets. These forward-looking statements are made pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. You are cautioned not to place undue reliance on these forward-looking statements each of which applies only as of the date of this report. Such forward-looking statements reflect the views of our management at the time such statements are made and are subject to a number of risks, uncertainties, estimates and assumptions, including, without limitation, and in addition to those identified in the text surrounding such statements, those identified in Item 1A “Risk Factors” and elsewhere in this report.

In addition, important factors to consider in evaluating such forward-looking statements include changes or developments in social, economic, market, legal or regulatory circumstances, changes in our business or growth strategy or an inability to execute our strategy due to changes in our industry or the economy generally, the emergence of new or growing competitors, the actions or omissions of third parties, including suppliers, customers, competitors and governmental authorities, and various other factors. Should any one or more of these risks or uncertainties materialize, or the underlying estimates or assumptions prove incorrect, actual results may vary significantly from those expressed in such forward-looking statements, and there can be no assurance that the forward-looking statements contained in this report will in fact occur.

General

We are a leading developer, manufacturer and distributor of medical equipment for treating, diagnosing, and managing sleep-disordered breathing and other respiratory disorders. Sleep-disordered breathing, or SDB, includes obstructive sleep apnea, or OSA, and other respiratory disorders that occur during sleep. When we were formed in 1989, our primary purpose was to commercialize a treatment for OSA developed by Professor Colin Sullivan. This treatment, nasal Continuous Positive Airway Pressure, or CPAP, was the first successful noninvasive treatment for OSA. CPAP systems deliver pressurized air, typically through a nasal mask, to prevent collapse of the upper airway during sleep.

Since the development of CPAP, we have developed a number of innovative products for SDB and other respiratory disorders including airflow generators, diagnostic products, mask systems, headgear and other accessories. Our growth has been fuelled by geographic expansion, increased awareness of respiratory conditions as a significant health concern among physicians and patients, and our research and product development efforts.

We employ approximately 2,500 people and sell our products in over 67 countries through a combination of wholly owned subsidiaries and independent distributors.

Our web site address is www.resmed.com. We make our periodic reports, together with any amendments, available on our web site, free of charge, as soon as reasonably practicable after we electronically file or furnish the reports with the Securities and Exchange Commission.

- 3 -

Table of Contents

Corporate History

ResMed Inc., a Delaware corporation, was formed in March 1994 as the ultimate holding company for our Americas, Asia-Pacific and European operating subsidiaries. On June 1, 1995, we completed an initial public offering of common stock and on June 2, 1995 our common stock commenced trading on the NASDAQ National Market. On September 30, 1999 we transferred our principal public listing to the New York Stock Exchange, or NYSE, trading under the ticker symbol RMD. On November 25, 1999, we established a secondary listing of our common stock via Chess Depositary Instruments, or CDI’s, on the Australian Stock Exchange, or ASX, also under the symbol RMD. Ten CDI’s on the ASX represent one share of our common stock on the NYSE. On July 1, 2002, we converted our ASX listing status from a foreign exempt listing to a full listing.

Our Australian subsidiary, ResMed Holdings Limited, was originally organized in 1989 by Dr. Peter Farrell to acquire from Baxter Center for Medical Research Pty Limited, or Baxter, the rights to certain technology relating to CPAP treatment as well as Baxter’s existing CPAP device business. Baxter had sold CPAP devices in Australia since 1988, having acquired the rights to the technology in 1987.

Since formation we have acquired a number of operating businesses including:

The Market

Sleep is a complex neurological process that includes two distinct states: rapid eye movement, or REM, sleep and non-rapid eye movement, or non-REM, sleep. REM sleep, which is about 20-25% of total sleep experienced by adults, is characterized by a high level of brain activity, bursts of rapid eye movement, increased heart and respiration rates, and paralysis of many muscles. Non-REM sleep is subdivided into four stages that generally parallel sleep depth; stage 1 is the lightest and stage 4 is the deepest.

The upper airway has no rigid support and is held open by active contraction of upper airway muscles. Normally, during REM sleep and deeper levels of non-REM sleep, upper airway muscles relax and the airway narrows. Individuals with narrow upper airways or poor muscle tone are prone to temporary collapses of the upper airway during sleep, called apneas, and to near closures of the upper airway called hypopneas. These breathing irregularities result in a lowering of blood oxygen concentration, causing the central nervous system to react to the lack of oxygen or increased carbon

- 4 -

Table of Contents

dioxide and signaling the body to respond. Typically, the individual subconsciously arouses from sleep, causing the throat muscles to contract, opening the airway. After a few gasping breaths, blood oxygen levels increase and the individual can resume a deeper sleep until the cycle repeats itself. Sufferers of OSA typically experience ten or more such cycles per hour. While these awakenings greatly impair the quality of sleep, the individual is not normally aware of these disruptions. In addition, OSA has recently been recognized as a cause of hypertension and a significant co-morbidity for heart disease, stroke and diabetes.

Scientists estimate that one in five adults have some form of obstructive sleep apnea. In the United States alone, this represents approximately 43 million people. Despite the high prevalence of OSA, there is a general lack of awareness of OSA among both the medical community and the general public. It is estimated that less than 10% of those with OSA have been diagnosed or treated. Many healthcare professionals are often unable to diagnose OSA because they are unaware that such non-specific symptoms as excessive daytime sleepiness, snoring, hypertension and irritability are characteristic of OSA.

While OSA has been diagnosed in a broad cross-section of the population, it is predominant among middle-aged men and those who are obese, smoke, consume alcohol in excess or use muscle-relaxing and pain-killing drugs. A strong association has been discovered between OSA and a number of cardiovascular diseases. Recent studies have shown that SDB is present in approximately 80% of patients with drug-resistant hypertension, approximately 60% of stroke patients and approximately 50% of patients with congestive heart failure. More recently, studies have shown a connection between SDB and diabetes: recent studies indicate that SDB is independently associated with glucose intolerance and insulin resistance.

Sleep-Disordered Breathing and Obstructive Sleep Apnea

Sleep-disordered breathing encompasses all physiological processes that cause detrimental breathing patterns during sleep. Manifestations include OSA, central sleep apnea, or CSA, and hypoventilation syndromes that occur during sleep. Hypoventilation syndromes are generally associated with obesity, chronic obstructive lung disease and neuromuscular disease. OSA is the most common form of SDB.

Sleep fragmentation and the loss of the deeper levels of sleep caused by OSA can lead to excessive daytime sleepiness, reduced cognitive function, including memory loss and lack of concentration, depression and irritability. OSA sufferers also experience an increase in heart rate and an elevation of blood pressure during the cycle of apneas. Several studies indicate that the oxygen desaturation, increased heart rate and elevated blood pressure caused by OSA may be associated with increased risk of cardiovascular morbidity and mortality due to angina, stroke and heart attack. Patients with OSA have been shown to have impaired daytime performance in a variety of cognitive functions including problem solving, response speed and visual motor coordination, and studies have linked OSA to increased occurrences of traffic and workplace accidents.

Generally, an individual seeking treatment for the symptoms of OSA is referred by a general practitioner to a specialist for further evaluation. The diagnosis of OSA typically requires monitoring the patient during sleep at either a sleep clinic or the patient’s home. During overnight testing, respiratory parameters and sleep patterns may be monitored, along with other vital signs such as heart rate and blood oxygen levels. Simpler tests, using devices such as our Apnealink, or our automatic positive airway pressure devices, monitor airflow during sleep, and use computer programs to analyze airflow patterns. These tests allow sleep clinicians to detect any sleep disturbances such as apneas, hypopneas or subconscious awakenings. We estimate that there are currently around 3,000 sleep clinics in the United States, a substantial portion of which are affiliated with hospitals. The number of sleep clinics has expanded significantly from approximately 100 such facilities in 1985.

- 5 -

Table of Contents

Existing Therapies

Before 1981, the primary treatment for OSA was a tracheotomy, a surgical procedure to cut a hole in the patient’s windpipe to create a channel for airflow. Most recently, alternative treatments have involved either uvulopalatopharyngoplasty, or UPPP, in which surgery is performed on the upper airway to remove excess tissue and to streamline the shape of the airway, implanting a device to add support to the soft palate, or mandibular advancement, in which the lower jaw is moved forward to widen the patient’s airway. UPPP alone has a poor success rate; however, when performed in conjunction with multi-stage upper airway surgical procedures, a greater success rate has been claimed. These combined procedures, performed by highly specialized surgeons, are expensive and involve prolonged and often painful recovery periods.

CPAP, by contrast, is a non-invasive means of treating OSA. CPAP was first used as a treatment for OSA in 1980 by Dr. Colin Sullivan, the past Chairman of our Medical Advisory Board. CPAP systems were commercialized for treatment of OSA in the United States in the mid 1980’s. Today, use of CPAP is generally acknowledged as the most effective and least invasive therapy for managing OSA.

During CPAP treatment, a patient sleeps with a nasal interface connected to a small portable airflow generator that delivers room air at a positive pressure. The patient breathes in air from the flow generator and breathes out through an exhaust port in the interface. Continuous air pressure applied in this manner acts as a pneumatic splint to keep the upper airway open and unobstructed. Interfaces include nasal masks and nasal pillows. Sometimes, when a patient leaks air through their mouth, a full-face mask may need to be used, rather than a nasal interface.

CPAP is not a cure and therefore, must be used on a nightly basis as long as treatment is required. Patient compliance has been a major factor in the efficacy of CPAP treatment. Early generations of CPAP units provided limited patient comfort and convenience. Patients experienced soreness from the repeated use of nasal masks and had difficulty falling asleep with the CPAP device operating at the prescribed pressure. In more recent years, product innovations to improve patient comfort and compliance have been developed. These include more comfortable patient interface systems; delay timers that gradually raise air pressure allowing the patient to fall asleep more easily; bilevel air flow generators, including Variable Positive Airway Pressure, or VPAP systems, which provide different air pressures for inhalation and exhalation; heated humidification systems to make the airflow more comfortable; and autotitration devices that reduce the average pressure delivered during the night.

Business Strategy

We believe that the SDB market will continue to grow in the future due to a number of factors including increasing awareness of OSA, improved understanding of the role of SDB treatment in the management of cardiac, neurologic, metabolic and related disorders, and an increase in home-based diagnosis. Our strategy for expanding our business operations and capitalizing on the growth of the SDB market consists of the following key elements:

Continue Product Development and Innovation.    We are committed to ongoing innovation in developing products for the diagnosis and treatment of SDB. We have been a leading innovator of products designed to more effectively treat SDB, increase patient comfort and encourage compliance with prescribed therapy. For example, in 1999 we introduced the Mirage Full Face Mask. This mask contains an inflatable air pocket, which conforms to the patient’s facial contours, creating a more comfortable and better seal. In 2002 we introduced the AutoSet Spirit flow generator, our second-generation autotitrating device that adapts to the patient’s breathing patterns to more effectively treat OSA. In 2003, we introduced the Mirage Activa nasal mask, with active cushion

- 6 -

Table of Contents

technology to automatically seal mask leaks. In 2004, we introduced the Mirage Swift nasal pillows system, a less obtrusive, lightweight, and flexible alternative to nasal masks. In 2005, we introduced the S8 range of CPAP, a small flow generator with optional integrated humidification. We believe that continued product development and innovation are key factors to our ongoing success. Approximately 12% of our employees are devoted to research and development activities. In fiscal year 2006, we invested $37.2 million, or 6% of our revenues, in research and development.

Expand Geographic Presence.    We market our products in over 67 countries to sleep clinics, home healthcare dealers and third party payers. We intend to increase our sales and marketing efforts in our principal markets, as well as expand the depth of our presence in other geographic regions.

Increase Public and Clinical Awareness.    We intend to continue to expand our existing promotional activities to increase awareness of SDB and our treatment alternatives. These promotional activities target the population with predisposition to SDB as well as primary care physicians and specialists, such as cardiologists, neurologists and pulmonologists. In addition, we also target special interest groups, including the National Stroke Association, the American Heart Association and the National Sleep Foundation.

During fiscal 2006, 2005 and 2004, we donated $0.8 million, $0.5 million and $0.5 million, respectively to the ResMed Foundation in the United States, and the ResMed Foundation in Australia, to further enhance research and awareness of SDB. The contributions to the Foundations reflect ResMed’s commitment to medical research into sleep-disordered breathing, particularly the treatment of obstructive sleep apnea.

Expand into New Clinical Applications.    We continually seek to identify new applications of our technology for significant unmet medical needs. Recent studies have established a clinical association between OSA and both stroke and congestive heart failure, and have recognized SDB as a cause of hypertension or high blood pressure. Research also indicates that SDB is independently associated with glucose intolerance and insulin resistance. We have developed a device for the treatment of Cheyne-Stokes breathing in patients with congestive heart failure. In addition, we maintain close working relationships with a number of prominent physicians to explore new medical applications for our products and technology. We have recently received FDA clearance and launched a new product in the United States for the treatment of respiratory insufficiency due to central sleep apnea, mixed apnea and periodic breathing, called the VPAP Adapt SV. The VPAP Adapt SV uses a technology known as adaptive servo-ventilation and was first made available to a select group of US key opinion leader sites beginning in the third quarter of fiscal 2006. Adaptive servo-ventilation, utilizes an advanced algorithm to calculate a patient-specific minute ventilation target and automatically adjusts pressure support to maintain the target. We believe this technology has allowed physicians to successfully treat complex breathing disorders in some patients who had previously tried and failed traditional PAP therapy.

Leverage the Experience of our Management Team and Medical Advisory Board.    Our senior management team has extensive experience in the medical device industry in general, and in the field of SDB in particular. Our Medical Advisory Board is comprised of experts in the field of SDB. We intend to continue to leverage the experience and expertise of these individuals to maintain our innovative approach to the development of products and increase awareness of the serious medical problems caused by SDB.

Products

Our portfolio of products for the treatment of OSA and other forms of SDB includes airflow generators, diagnostic products, mask systems, headgear and other accessories.

- 7 -

Table of Contents

Air Flow Generators

We produce CPAP, VPAP and AutoSet systems for the titration and treatment of SDB. The flow generator systems deliver positive airway pressure through a patient interface, either a small nasal mask, nasal pillows system, or full-face mask.

Our VPAP units deliver ultra-quiet, comfortable bilevel therapy. There are two preset pressures: a higher pressure as the patient breathes in, and a lower pressure as the patient breathes out. Breathing out against a lower pressure makes treatment more comfortable, particularly for patients who need high pressure levels or for those with impaired breathing ability.

AutoSet systems are based on a proprietary technology to monitor breathing and can also be used in the diagnosis, treatment and management of OSA. CPAP and VPAP flow generators accounted for approximately 52%, 49% and 50% of our net revenues in fiscal years 2006, 2005 and 2004, respectively.

- 8 -

Table of Contents

With the acquisition of Saime in May 2005, we increased our presence in the European homecare ventilation market. The VS and Elisée range of products are sophisticated, yet easy to use for physicians, clinicians and patients. We believe these devices complement our VPAP III, VPAP Adapt SV and Autoset CS2 for patients who need ventilatory assistance.

* Not cleared for marketing in the United States

# Sold in United States only

- 9 -

Table of Contents

* Not cleared for marketing in the United States

# Sold outside United States only

- 10 -

Table of Contents

* Not cleared for marketing in the United States

# Sold outside United States only

- 11 -

Table of Contents

Mask Systems and Diagnostic Products

Mask systems are one of the most important elements of SDB treatment systems. Masks are a primary determinant of patient comfort and as such may drive or impede patient compliance with therapy. We have been a consistent innovator in masks, improving patient comfort while minimizing size and weight. Masks, accessories, motors and diagnostic products accounted for approximately 48%, 51% and 50% of our net revenues in fiscal years 2006, 2005 and 2004, respectively.

* Not cleared for marketing in the United States

# Sold outside United States only

- 12 -

Table of Contents

We market sleep recorders for the diagnosis and titration of SDB in sleep clinics and hospitals. These diagnostic systems record relevant respiratory and sleep data, which can be analyzed by a sleep specialist or physician who can then tailor an appropriate OSA treatment regimen for the patient.

* Not cleared for marketing in the United States

# Sold outside United States only

a Not manufactured by ResMed

- 13 -

Table of Contents

Accessories and Other Products

To enhance patient comfort, convenience and compliance, we market a variety of other products and accessories. These products include humidifiers, such as the HumidAire, H2i and H3i, which connect directly with the CPAP, VPAP and AutoSet flow generators to humidify and heat the air delivered to the patient. Their use helps prevent the drying of nasal passages that can cause discomfort. Other optional accessories include cold passover humidifiers, carry bags and breathing circuits. To assist those professionals diagnosing or managing the treatment of patients there are data communications and control products such as the ResLink, ResControl and ResControl II modules that facilitate the transfer of data and other information to and from the flow generators. MAP also offers a range of accessories, including the Twister remote, an intelligent remote control for use in the sleep laboratory environment to set and monitor flow generators, the Aero-Click connection system, which allows a quick, simple connect/disconnect between the mask and CPAP air delivery source and the AeroFix headgear, for the comfortable adjustment of masks for CPAP therapy. Since the May 2002 acquisition of Servo Magnetics Inc., we have also sold custom electric motors, primarily for use in data storage and aerospace applications, but we do not expect custom electric motor sales to contribute material revenues in the future.

Product Development and Clinical Trials

We have a strong track record in innovation in the sleep market. In 1989, we introduced our first CPAP device. Since then we have been committed to an ongoing program of product advancement and development. Currently, our product development efforts are focused on not only improving our current product offerings, but also expanding into new product applications. For example, in 1997, we introduced the Mirage Mask. This mask was based on the innovative Bubble Mask technology introduced in 1991, which used the principle of air inflation of the mask cushion to create a more comfortable and better seal by better conforming to patient facial contours.

In 1999, we introduced the AutoSet T flow generator, an autotitrating device that adapts to the patient’s breathing patterns to effectively prevent apneas. In 2001, we introduced our next generation autotitrating device, the AutoSet Spirit. The AutoSet Spirit is an autotitrating modular device with optional integrated humidifier. In September 2003, we introduced the Activa nasal mask using our patented Active Cushion Technology, which automatically seals mask leaks. In August 2004, we launched our Mirage Swift mask, a light and unobtrusive nasal cannula mask system. Also, in August 2004 we launched an improved AutoSet CS 2 (outside the United States only) to treat congestive heart failure patients with significant central sleep apnea. In March 2006 we launched the VPAP Adapt SV within the United States. This product is for the treatment of respiratory insufficiency due to central sleep apnea, mixed apnea and periodic breathing and uses a technology known as adaptive servo-ventilation.

We continually seek to identify new applications of our technology for significant unmet medical needs. SDB is associated with a number of symptoms beyond excessive daytime sleepiness and irritability. Recent studies have established a clinical association between SDB and hypertension, stroke, congestive heart failure and diabetes. We support clinical trials in the United States, Germany, France, the United Kingdom, Italy, Switzerland and Australia to develop new clinical applications for our technology.

We consult with physicians at major sleep centers throughout the world to identify technological trends in the treatment of SDB. Some of these physicians served on our Medical Advisory Board during fiscal year 2006. During fiscal year 2007, we intend to reorganize our Medical Advisory Board into several regional advisory boards. New product ideas are also identified by our marketing staff, direct sales force, network of distributors, manufacturers’ representatives, customers and patients.

- 14 -

Table of Contents

Typically, our internal development staff then develops these ideas, where appropriate, into new products.

In fiscal years 2006, 2005 and 2004 we invested $37.2 million, $30.0 million and $26.2 million, respectively, on research and development.

Sales and Marketing

We currently market our products in over 67 countries using a network of distributors, independent manufacturers’ representatives and our direct sales force. We attempt to tailor our marketing approach to each national market, based on regional awareness of SDB as a health problem, physician referral patterns, consumer preferences and local reimbursement policies.

North America and Latin America.    Our products are typically purchased by a home healthcare dealer who then sells the products to the patient. The decision to purchase our products, as opposed to those of our competitors, is made or influenced by one or more of the following individuals or organizations: the prescribing physician and his or her staff; the home healthcare dealer; the insurer and the patient. In the United States, our sales and marketing activities are conducted through a field sales organization made up of regional territory representatives, program development specialists, regional sales directors and independent manufacturers’ representatives. Our U.S. field sales organization markets and sells products to home healthcare dealer branch locations throughout the United States. Our direct sales force receives a base salary, plus commissions, while our independent sales representatives receive higher commissions, but no base salary.

We also promote and market our products directly to sleep clinics. Patients who are diagnosed with OSA and prescribed CPAP treatment are typically referred by the diagnosing sleep clinic to a home healthcare dealer to fill the prescription. The home healthcare dealer, in consultation with the referring physician, will assist the patient in selecting the equipment, fit the patient with the appropriate mask and set the flow generator pressure to the prescribed level.

In the United States, our sales employees and manufacturers’ representatives are managed by the Chief Operating Officer Americas and Vice President of Marketing. Our Canadian and Latin American sales are conducted through independent distributors. Sales in North and Latin America accounted for 52%, 51% and 49% of our net revenues for fiscal years 2006, 2005 and 2004, respectively.

Europe.    We market our products in most major European countries. We have wholly-owned subsidiaries in Austria, Finland, France, Germany, Spain, Sweden, Norway, Netherlands, Switzerland and the United Kingdom that sell our products directly into those countries. We use independent distributors to sell our products in other areas of Europe. Distributors are selected in each country based on their knowledge of respiratory medicine and a commitment to SDB therapy. In each country in which we have a subsidiary, a local senior manager is responsible for direct national sales. In many countries in Europe, we sell our products to home healthcare dealers who then sell the products to the patients. In Germany, we also operate a home healthcare company, in which we provide products and services directly to patients, and receive reimbursement directly from third party payers.

Our European Chief Operating Officer is responsible for coordination of all European activities and, in conjunction with local management, the direct sales activity in Europe. Sales in Europe accounted for 39%, 41% and 43% of our total net revenues for fiscal years 2006, 2005 and 2004, respectively.

Asia Pacific.    Marketing in Asia Pacific and the rest of the world is the responsibility of our Senior Vice President Sales & Marketing Asia Pacific. We have wholly–owned subsidiaries in Australia,

- 15 -

Table of Contents

Hong Kong, Japan, Malaysia, New Zealand and Singapore that sell our products directly into those countries. We use a combination of our direct sales force and independent distributors in Australia and New Zealand, and use independent distributors to sell our products elsewhere in Asia Pacific. Sales in Asia Pacific and the rest of the world accounted for 9%, 8% and 8% of our total net revenues for the fiscal years 2006, 2005 and 2004, respectively.

Other Marketing Efforts.    In addition to our and our distributors’ sales efforts, we work with the following cardiovascular disease associations to raise awareness of the co-morbidity of SDB in cardiovascular disease patients, including coronary artery disease, congestive heart failure, hypertension and stroke:

We also continue to work to raise awareness of SDB in diabetes. Current research is increasingly showing an independent association between OSA and type 2 diabetes. Accordingly, we initiated a study investigating the prevalence of OSA in the type 2 diabetic population. Due to the high prevalence of the co-incidence of SDB and type 2 diabetes, we are now actively supporting the American Association of Diabetes Educators and are in the process of setting up further initiatives to develop the SDB market in the diabetic population.

In addition to the above marketing efforts we have strategic alliances with the Guidant Corporation and the MedCath Corporation. The Guidant Corporation is a world leader in the treatment of cardiac disease. Guidant merged with Boston Scientific Corporation during fiscal year 2006. Since fiscal year 2003, we have had an agreement with Guidant under which the companies will work together in the areas of sleep-disordered breathing and cardiac rhythm disorders, disease states with a significant patient population overlap. Currently, the companies plan to collaborate on research and development projects, clinical studies, as well as physician and patient education. MedCath develops, owns and operates hospitals in partnership with cardiologists and cardiovascular surgeons. Our alliance allows MedCath to offer SDB screening, diagnosis and treatment in conjunction with services currently offered through the company’s cardiovascular diagnostic centers. We believe that our affiliations and continued work with these organizations raises the awareness of SDB as a significant health concern.

- 16 -

Table of Contents

Manufacturing

Our principal manufacturing facility is located in Sydney, Australia and comprises a 215,000 square foot manufacturing facility. Our manufacturing operations consist primarily of assembly and testing of our flow generators, masks and accessories. Of the numerous raw materials, parts and components purchased for assembly of our therapeutic and diagnostic sleep disorder products, most are off-the-shelf items available from multiple vendors. We generally manufacture to our internal sales forecasts and fill orders as received. Over the last few years, the manufacturing processes have been transformed along lean manufacturing guidelines to flow lines staffed by dedicated teams. Each team is responsible for the manufacture and quality of their product group and decisions are based on performance and quality measures, including customer feedback.

Our quality management system is based upon the requirements of ISO 9001, ISO 13485, FDA Quality System Regulations for Medical Devices and the Medical Device Directive (93/42/EEC). Our Sydney, Australia and San Diego, California facilities are each accredited to ISO 9001 and ISO 13485. These two sites have third party audits conducted by the ISO certification bodies at regular intervals.

Our German manufacturing operation based in Munich operates in a facility of approximately 24,000 square feet. This facility is accredited to ISO 13485 and primarily assembles and tests flow generators for sale by our German subsidiary. Appropriate quality controls monitor and measure product assembly and performance.

As part of the acquisition of Saime SA on May 19, 2005, we acquired a 7,000 square foot manufacturing facility in Paris, France. This facility is accredited to ISO 13485 and is primarily responsible for the assembly of the Saime brand of mechanical ventilators and associated accessories.

We also manufacture high-quality electric motors for both our flow generator devices and external customers, primarily in the data storage sector, at our Servo Magnetics Inc., or SMI, facility at Canoga Park, California. The SMI facility is approximately 35,500 square feet. We have recently leased a larger site of 72,000 square feet at Chatsworth, California and expect to move to this new SMI facility in October 2006.

Third-Party Reimbursement

The cost of medical care in many of the countries in which we operate is funded in substantial part by government and private insurance programs. In Germany, we receive payments directly from these payers. Outside Germany, although we do not generally receive payments for our products directly from these payers, our success in major markets is dependent upon the ability of patients to obtain adequate reimbursement for our products.

In the United States, our products are purchased primarily by home healthcare dealers, hospitals or sleep clinics, which then invoice third-party payers directly for reimbursement. Domestic third-party payers include Medicare, Medicaid and corporate health insurance plans. These payers may deny reimbursement if they determine that a device is not used in accordance with cost-effective treatment methods, or is experimental, unnecessary or inappropriate. The long-term trend towards managed healthcare, or legislative proposals to reform healthcare, could control or significantly influence the purchase of healthcare services and products and could result in lower prices for our products. In some foreign markets, such as Spain, France and Germany, government reimbursement is currently available for purchase or rental of our products, however, subject to constraints such as price controls or unit sales limitations. In Australia and in some other foreign markets, there is currently limited or no reimbursement for devices that treat OSA.

- 17 -

Table of Contents

Even though we do not file claims or bill governmental programs and other third-party payers directly for reimbursement for our products sold in the United States, we are still subject to laws and regulations relating to governmental programs, and any violation of these laws and regulations could result in civil and criminal penalties, including fines. In particular, the federal Anti-Kickback Law prohibits persons from knowingly and willfully soliciting, receiving, offering or providing remuneration, directly or indirectly, to induce either the referral of an individual, or the furnishing, recommending or arranging for a good or service, for which payment may be made under a Federal healthcare program such as the Medicare and Medicaid programs. The government has interpreted this law broadly to apply to the marketing and sales activities of manufacturers and distributors like us. Many states have adopted laws similar to the federal Anti-Kickback Law. We are also subject to other federal and state fraud laws applicable to payment from any third-party payer. These laws prohibit persons from knowingly and willfully filing false claims or executing a scheme to defraud any healthcare benefit program, including private third-party payers. These laws may apply to manufacturers and distributors who provide information on coverage, coding and reimbursement of their products to persons who bill third-party payers. We continuously strive to comply with these laws and believe that our arrangements do not violate these laws. Liability may still arise from the intentions or actions of the parties with whom we do business or from a different governmental agency interpretation of the laws.

Service and Warranty

We generally offer one-year and two-year limited warranties on our flow generator products. Warranties on mask systems are for 90 days. In most markets, we rely on our distributors to repair our products with parts supplied by us. In the United States, home healthcare dealers generally arrange shipment of products to our San Diego facility for repair.

We receive returns of our products from the field for various reasons. We believe that the level of returns experienced to date is consistent with levels typically experienced by manufacturers of similar devices. We provide for warranties and returns based on historical data.

Competition

The markets for our products are highly competitive. We believe that the principal competitive factors in all of our markets are product features, reliability and price. Customer support, reputation and efficient distribution are also important factors.

We compete on a market-by-market basis with various companies, some of which have greater financial, research, manufacturing and marketing resources than us. In the United States, our principal market, Respironics Inc.; DeVilbiss, a division of Sunrise Medical Inc.; Nellcor Puritan Bennett, a subsidiary of Tyco Inc.; and Fisher & Paykel Healthcare Corporation Limited are the primary competitors for our products. Our principal European competitors are also Respironics, DeVilbiss, and Nellcor Puritan Bennett, as well as regional European manufacturers. The disparity between our resources and those of our competitors may increase as a result of the trend towards consolidation in the healthcare industry. In addition, our products compete with surgical procedures and dental appliances designed to treat OSA and other SDB related respiratory conditions. The development of new or innovative procedures or devices by others could result in our products becoming obsolete or noncompetitive, which would harm our revenues and financial condition.

Any product developed by us that gains regulatory clearance will have to compete for market acceptance and market share. An important factor in such competition may be the timing of market introduction of competitive products. Accordingly, the relative speed with which we can develop products, complete clinical testing and regulatory clearance processes and supply commercial

- 18 -

Table of Contents

quantities of the product to the market are important competitive factors. In addition, our ability to compete will continue to be dependent on the extent to which we are successful in protecting our patents and other intellectual property.

Patents and Proprietary Rights and Related Litigation

Through our subsidiaries ResMed Limited, Medizintechnik fur Arzt und Patient GmbH, SMI and Saime SA, we own or have licensed rights to 220 issued United States patents (including 60 design patents) and 325 issued foreign patents. In addition, there are 262 pending United States patent applications (including 68 design patent applications), 494 pending foreign patent applications, 443 registered foreign designs and 122 pending foreign designs. Some of these patents, patent applications and designs relate to significant aspects and features of our products.

Of our patents, 13 United States patents and 13 foreign patents are due to expire in the next five years, with 1 foreign patent due to expire in 2008, 2 in 2010, and 10 in 2011; and 1 United States patent in 2007, 6 United States patents in 2008, 2 United States patents in 2010, and 4 United States patents in 2011. We believe that the expiration of these patents will not have a material adverse impact on our competitive position.

We rely on a combination of patents, trade secrets, copyrights, trademarks and non-disclosure agreements to protect our proprietary technology and rights.

Litigation may be necessary to attempt to enforce patents issued to us, to protect our rights, or to defend third-party claims of infringement by us of the proprietary rights of others. Patent laws regarding the enforceability of patents vary from country to country. Therefore, there can be no assurance that patent issues will be uniformly resolved, or that local laws will provide us with consistent rights and benefits.

Government Regulations

Our products are subject to extensive regulation particularly as to safety, efficacy and adherence to FDA Quality System Regulation, and related manufacturing standards. Medical device products are subject to rigorous FDA and other governmental agency regulations in the United States and regulations of relevant foreign agencies abroad. The FDA regulates the introduction, manufacture, advertising, labeling, packaging, marketing, distribution and record keeping for such products, in order to ensure that medical products distributed in the United States are safe and effective for their intended use. In addition, the FDA is authorized to establish special controls to provide reasonable assurance of the safety and effectiveness of most devices. Non-compliance with applicable requirements can result in import detentions, fines, civil penalties, injunctions, suspensions or losses of regulatory approvals, recall or seizure of products, operating restrictions, refusal of the government to approve product export applications or allow us to enter into supply contracts, and criminal prosecution.

The FDA requires that a manufacturer introducing a new medical device or a new indication for use of an existing medical device obtain either a Section 510(k) premarket notification clearance or a premarket approval, or PMA, before introducing it into the U.S. market. Our products currently marketed in the United States are marketed in reliance on 510(k) pre-marketing clearances as either Class I or Class II devices. The process of obtaining a Section 510(k) clearance generally requires the submission of performance data and often clinical data, which in some cases can be extensive, to demonstrate that the device is “substantially equivalent” to a device that was on the market before 1976 or to a device that has been found by the FDA to be “substantially equivalent” to such a pre-1976 device. As a result, FDA approval requirements may extend the development process for a

- 19 -

Table of Contents

considerable length of time. In addition, in some cases, the FDA may require additional review by an advisory panel, which can further lengthen the process. The PMA process, which is reserved for new devices that are not substantially equivalent to any predicate device and for high-risk devices or those that are used to support or sustain human life, may take several years and requires the submission of extensive performance and clinical information.

As a medical device manufacturer, all of our domestic and Australian manufacturing facilities are subject to inspection on a routine basis by the FDA. We believe that our design, manufacturing and quality control procedures are in substantial compliance with the FDA’s regulatory requirements.

Sales of medical devices outside the United States are subject to regulatory requirements that vary widely from country to country. Approval for sale of our medical devices in Europe is through the CE mark process. Where appropriate, our products are CE marked to the European Union’s Medical Device Directive. Under the CE marketing scheme, our products are classified as either Class I or Class II. Our devices are listed in Australia with the Therapeutic Goods Administration, or TGA, and in Canada with Health Canada.

Employees

As of June 30, 2006, we had approximately 2,500 employees or full time consultants, of which approximately 900 persons were employed in warehousing and manufacturing, 300 in research and development, 1,300 in sales, marketing and administration. Of our employees and consultants approximately, 1,100 were located in Australia, 500 in the United States, 800 in Europe and 100 in Asia.

We believe that the success of our business will depend, in part, on our ability to attract and retain qualified personnel. None of our employees is covered by a collective bargaining agreement. We believe that our relationship with our employees is good.

Medical Advisory Board

Our Medical Advisory Board, consists of physicians specializing in the field of sleep-disordered breathing and ventilation. During fiscal 2006 the Medical Advisory Board members met as a group with members of our senior management and members of our research and marketing departments to advise us on technology trends in SDB and other developments in sleep disorders medicine. Medical Advisory Board members are also available to consult on an as-needed basis with our senior management. In alphabetical order, Medical Advisory Board members during fiscal 2006 included:

Claudio Bassetti, M.D.

Michael Coppola, M.D.

Terence M. Davidson, M.D.

Anthony N. DeMaria, M.D.

Neil J. Douglas, M.D.

Nicholas Hill, M.D.

Barry J. Make, M.D.

Ralph Pascualy, M.D.

Barbara Phillips, M.D.

Bruce Robinson, M.D.

- 20 -

Table of Contents

Jonathan R. L. Schwartz, M.D.

Helmut Teschler, M.D.

B. Tucker Woodson, M.D.

During fiscal year 2007, we intend to reorganize our Medical Advisory Board into several regional advisory boards. Not all members of the Medical Advisory Board in fiscal year 2006 will continue as members during fiscal year 2007.

Before deciding to purchase, hold or sell our common stock, you should carefully consider the risks described below in addition to the other cautionary statements and risks described elsewhere, and the other information contained, in this Report and in our other filings with the SEC, including our subsequent reports on Forms 10-Q and 8-K. The risks and uncertainties described below are not the only ones we face. Additional risks and uncertainties not presently known to us or that we currently deem immaterial may also affect our business. If any of these known or unknown risks or uncertainties actually occurs with material adverse effects on us, our business, financial condition and results of operations could be seriously harmed. In that event, the market price for our common stock will likely decline, and you may lose all or part of your investment.

Our inability to compete successfully in our markets may harm our business.    The markets for our sleep-disordered breathing products are highly competitive and are characterized by frequent product improvements and evolving technology. Our ability to compete successfully depends, in part, on our ability to develop, manufacture and market innovative new products. The development of innovative new products by our competitors or the discovery of alternative treatments or potential cures for the conditions that our products treat could make our products noncompetitive or obsolete. Current competitors, new entrants, academics, and others are trying to develop new devices, alternative treatments or cures, and pharmaceutical solutions to the conditions our products treat.

Additionally, some of our competitors have greater financial, research and development, manufacturing and marketing resources than we do. The past several years have seen a trend towards consolidation in the healthcare industry and in the markets for our products. Industry consolidation could result in greater competition if our competitors combine their resources or if our competitors are acquired by other companies with greater resources than ours. This competition could increase pressure on us to reduce the selling prices of our products or could cause us to increase our spending on research and development and sales and marketing. If we are unable to develop innovative new products, maintain competitive pricing, and offer products that consumers perceive to be as reliable as those of our competitors, our sales or gross margins could decrease which would harm our business.

Our business depends on our ability to market effectively to dealers of home healthcare products and sleep clinics.    We market our products primarily to home healthcare dealers and to sleep clinics that diagnose OSA and other sleep disorders. We believe that home healthcare dealers and sleep clinics play a significant role in determining which brand of product a patient will use. The success of our business depends on our ability to market effectively to home healthcare dealers and sleep clinics to ensure that our products are properly marketed and sold by these third parties.

We have limited resources to market to approximately the 3,000 U.S. sleep clinics and the more than 6,000 home healthcare dealer branch locations, most of which use, sell or recommend several brands of products. In addition, home healthcare dealers have experienced price pressures as government and third-party reimbursement has declined for home healthcare products, and home healthcare dealers are requiring price discounts and longer periods of time to pay for products purchased from us. We

- 21 -

Table of Contents

cannot assure you that sleep clinic physicians will continue to prescribe our products, or that home healthcare dealers or patients will not substitute competing products when a prescription specifying our products has been written.

We have expanded our marketing activities to target the population with a predisposition to sleep-disordered breathing as well as primary care physicians and various medical specialists. We cannot assure you that these marketing efforts will be successful in increasing awareness or sales of our products.

Any inability to market effectively our products outside the U.S. could impact our profitability.    Approximately half our revenues are generated outside the U.S., in over 67 different countries. Many of these countries have unique regulatory, medical and business environments, which may adversely impact our ability to market our products. If we are unable to market effectively our products outside the U.S., our overall financial performance could decline.

Fluctuations in foreign currency exchange rates could result in declines in our reported sales and earnings.    Since our international sales and a significant portion of our manufacturing costs are denominated in local currencies and not in U.S. dollars, our reported sales and earnings are subject to fluctuations in foreign exchange rates. We had foreign currency transaction losses in recent periods and may have further losses in the future. We expect that international sales will continue to be a significant portion of our business and that a significant portion of our manufacturing costs will continue to be denominated in Australian dollars.

If we are unable to support our continued growth, our business could suffer.    We have experienced rapid and substantial growth. As we continue to grow, the complexity of our operations increases, placing greater demands on our management. Our ability to manage our growth effectively depends on our ability to implement and improve our financial and management information systems on a timely basis and to effect other changes in our business. Unexpected difficulties during expansion, the failure to attract and retain qualified employees, the failure to successfully replace or upgrade our management information systems, the failure to manage costs or our inability to respond effectively to growth or plan for future expansion could cause our growth to stop. If we fail to manage effectively and efficiently our growth, our costs could increase faster than our revenues and our business could suffer.

If we fail to integrate our recent acquisitions with our operations, our business could suffer.    During the year ended June 30, 2006, we acquired PolarMed and Pulmomed and during the fiscal year ended June 30, 2005, we acquired Saime, Hoefner and Resprecare. We are currently in the process of integrating our operations with these recent acquisitions. The integration will require significant efforts from each company. We may find it difficult to integrate the operations as personnel may leave and licensees, distributors or suppliers may terminate their arrangements or demand amended terms to these arrangements. Additionally, our management may have their attention diverted while trying to integrate these companies. If we are not able to successfully integrate the operations, we may not realize the anticipated benefits of these acquisitions.

If we fail to implement our restructure plans successfully, our business could suffer.    In fiscal year 2005, we merged the operations of ResMed Germany and MAP into a single operating unit as part of our German restructure plan. We will continue to monitor the progress of this restructure and adjust our business strategies and personnel accordingly to achieve maximum efficiencies, cost savings and success. If we are not able to integrate the operations successfully, we may not fully realize the anticipated benefits of the restructure.

- 22 -

Table of Contents

We are subject to various risks relating to international activities that could affect our overall profitability.    We manufacture substantially all of our products outside the U.S. and sell a significant portion of our products in non-U.S. markets. Sales outside North and Latin America accounted for approximately 48% and 49% of our net revenues in the years ended June 30, 2006 and 2005, respectively. We expect that sales within these areas will account for approximately 50% of our net revenues in the foreseeable future. Our sales outside of North America and our operations in Europe, Australia and Asia are subject to several difficulties and risks that are separate and distinct from those we face in our U.S. operations, including:

Government and private insurance plans may not adequately reimburse patients for our products, which could result in reductions in sales or selling prices for our products.    Our ability to sell our products depends in large part on the extent to which reimbursement for the cost of our products will be available from government health administration authorities, private health insurers and other organizations. These third party payers are increasingly challenging the prices charged for medical products and services. Therefore, even if a product is approved for marketing, we cannot assure you that reimbursement will be allowed for the product, that the reimbursement amount will be adequate or, that the reimbursement amount, even if initially adequate, will not subsequently be reduced. For example, in some markets, such as Spain, France and Germany, government reimbursement is currently available for purchase or rental of our products but is subject to constraints such as price controls or unit sales limitations. In other markets, such as Australia and the United Kingdom, there is currently limited or no reimbursement for devices that treat sleep-disordered breathing conditions. Additionally, future legislation or regulation concerning the healthcare industry or third party or governmental coverage and reimbursement, particularly legislation or regulation limiting consumers’ reimbursement rights, may harm our business.

As we continue to develop new products, those products will generally not qualify for reimbursement, if at all, until they are approved for marketing. In the United States, we sell our products primarily to home healthcare dealers and to sleep clinics. We do not file claims and bill governmental programs and other third party payers directly for reimbursement for our products. However, we are still subject to laws and regulations relating to governmental reimbursement programs, particularly Medicaid and Medicare.

In addition to reimbursement for our products, our customers depend in part on reimbursement by government and private health insurers for other products. Any proposed reductions in reimbursement, if they occur, may have a material impact on our customers. Any material impact on our customers may indirectly affect our sales to those customers, or the collectibility of receivables we have from those customers.

Failure to comply with anti-kickback and fraud regulations could result in substantial penalties and changes in our business operations.    In particular, the federal Anti-Kickback Law prohibits persons from knowingly and willfully soliciting, receiving, offering or providing remuneration,

- 23 -

Table of Contents

directly or indirectly, to induce either the referral of an individual, or the furnishing, recommending or arranging for a good or service, for which payment may be made under a federal healthcare program such as the Medicare and Medicaid programs. The U.S. government has interpreted this law broadly to apply to the marketing and sales activities of manufacturers and distributors like us. Many states and other governments have adopted laws similar to the federal Anti-Kickback Law. We are also subject to other federal and state fraud laws applicable to payment from any third party payer. These laws prohibit persons from knowingly and willfully filing false claims or executing a scheme to defraud any healthcare benefit program, including private third party payers. These laws may apply to manufacturers and distributors who provide information on coverage, coding, and reimbursement of their products to persons who do bill third party payers. Any violation of these laws and regulations could result in civil and criminal penalties (including fines), increased legal expenses and exclusions from governmental reimbursement programs, all of which could have a material adverse effect upon our business, financial conditions and results of operations.

Complying with Food and Drug Administration, or FDA, and other regulations is an expensive and time-consuming process, and any failure to comply could result in substantial penalties.    We are subject to various federal, state, local and international regulations regarding our business activities. Failure to comply with these regulations could result in, among other things, recalls of our products, substantial fines and criminal charges against us or against our employees. Furthermore, our products could be subject to recall if the FDA or we determine, for any reason, that our products are not safe or effective. Any recall or other regulatory action could increase our costs, damage our reputation, affect our ability to supply customers with the quantity of products they require and materially affect our operating results.

Product sales, introductions or modifications may be delayed or canceled as a result of FDA regulations or similar foreign regulations, which could cause our sales and profits to decline.    Before we can market or sell a new medical device in the United States, we must obtain FDA clearance, which can be a lengthy and time-consuming process. We generally receive clearance from the FDA to market our products in the United States under Section 510(k) of the Federal Food, Drug, and Cosmetic Act or our products are exempt from the 510(k) clearance process. We have modified some of our 510(k) approved products without submitting new 510(k) notices, which we do not believe were required. However, if the FDA disagrees with us and requires us to submit new 510(k) notifications for modifications to our existing products, we may be required to stop marketing the products while the FDA reviews the 510(k) notification.

Any new product introduction or existing product modification could be subjected to a lengthier, more rigorous FDA examination process. For example, in certain cases we may need to conduct clinical trials of a new product before submitting a 510(k) notice. Additionally, we may be required to obtain premarket approvals for our products. The requirements of these more rigorous processes could delay product introductions and increase the costs associated with FDA compliance. Marketing and sale of our products outside the United States are also subject to regulatory clearances and approvals, and if we fail to obtain these regulatory approvals, our sales could suffer.

We cannot assure you that any new products we develop will receive required regulatory approvals from U.S. or foreign regulatory agencies.

Off-label marketing of our products could result in substantial penalties.    Clearance under Section 510(k) only permits us to market our products for the uses indicated on the labeling cleared by the FDA. We may request additional label indications for our current products, and the FDA may deny those requests outright, require additional expensive clinical data to support any additional indications or impose limitations on the intended use of any cleared products as a condition of clearance. If the FDA determines that we have marketed our products for off-label use, we could be subject to fines, injunctions or other penalties.

- 24 -

Table of Contents

Disruptions in the supply of components from our single source suppliers could result in a significant reduction in sales and profitability.    We purchase uniquely configured components for our devices from various suppliers, including some who are single-source suppliers for us. We cannot assure you that a replacement supplier would be able to configure its components for our devices on a timely basis or, in the alternative, that we would be able to reconfigure our devices to integrate the replacement part.

A reduction or halt in supply while a replacement supplier reconfigures its components, or while we reconfigure our devices for the replacement part, would limit our ability to manufacture our devices, which could result in a significant reduction in sales and profitability. We cannot assure you that our inventories would be adequate to meet our production needs during any prolonged interruption of supply.

Our intellectual property may not protect our products, and/or our products may infringe on the intellectual property rights of third parties.    We rely on a combination of patents, trade secrets and non-disclosure agreements to protect our intellectual property. Our success depends, in part, on our ability to obtain and maintain United States and foreign patent protection for our products, their uses and our processes to preserve our trade secrets and to operate without infringing on the proprietary rights of third parties. We have a number of pending patent applications, and we do not know whether any patents will issue from any of these applications. We do not know whether any of the claims in our issued patents or pending applications will provide us with any significant protection against competitive products or otherwise be commercially valuable. Legal standards regarding the validity of patents and the proper scope of their claims are still evolving, and there is no consistent law or policy regarding the valid breadth of claims. Additionally, there may be third party patents, patent applications and other intellectual property relevant to our products and technology which are not known to us and that block or compete with our products.

We face the risks that:

Litigation may be necessary to enforce patents issued to us, to protect our proprietary rights, or to defend third party claims that we have infringed upon proprietary rights of others. For example, we are currently appealing the decision of a court in Germany that entered judgment in favor of certain plaintiffs that had claimed they should be listed as co-inventors on two of our German patent applications. The defense and prosecution of patent claims, including these pending claims, as well as participation in other inter-party proceedings, can be expensive and time consuming, even in those instances in which the outcome is favorable to us. If the outcome of any litigation or proceeding brought against us were adverse, we could be subject to significant liabilities to third parties, could be required to obtain licenses from third parties, could be forced to design around the patents at issue or could be required to cease sales of the affected products. A license may not be available at all or on commercially viable terms, and we may not be able to redesign our products to avoid infringement. Additionally, the laws regarding the enforceability of patents vary from country to country, and we cannot assure you that any patent issues we face will be uniformly resolved, or that local laws will provide us with consistent rights and benefits.

- 25 -

Table of Contents

We are subject to potential product liability claims that may exceed the scope and amount of our insurance coverage, which would expose us to liability for uninsured claims.    We are subject to potential product liability claims as a result of the design, manufacture and marketing of medical devices. Any product liability claim brought against us, with or without merit, could result in the increase of our product liability insurance rates. In addition, we would have to pay any amount awarded by a court in excess of our policy limits. Our insurance policies have various exclusions, and thus we may be subject to a product liability claim for which we have no insurance coverage, in which case, we may have to pay the entire amount of any award. We cannot assure you that our insurance coverage will be adequate or that all claims brought against us will be covered by our insurance. Insurance varies in cost and can be difficult to obtain, and we cannot assure you that we will be able to obtain insurance in the future on terms acceptable to us or at all. A successful product liability claim brought against us in excess of our insurance coverage, if any, may require us to pay substantial amounts, which could harm our business.

We are subject to tax audits by various tax authorities in many jurisdictions.    From time to time we may be audited by the tax authorities and are still subject to an ongoing German tax audit. Any final assessment resulting from this audit could result in material changes to our past or future taxable income, tax payable or deferred tax assets, and could require us to pay penalties and interest that could materially adversely affect our financial results.

Our quarterly operating results are subject to fluctuation for a variety of reasons.    Our operating results have, from time to time, fluctuated on a quarterly basis and may be subject to similar fluctuations in the future. These fluctuations may result from a number of factors, including:

Fluctuations in our quarterly operating results may cause the market price of our common stock to fluctuate.

If a natural or man-made disaster strikes our manufacturing facilities, we will be unable to manufacture our products for a substantial amount of time and our sales and profitability will decline.    Our facilities and the manufacturing equipment we use to produce our products would be costly to replace and could require substantial lead-time to repair or replace. The facilities may be affected by natural or man-made disasters and in the event they were affected by a disaster, we would be forced to rely on third party manufacturers. Although we believe we possess adequate insurance for damage to our property and the disruption of our business from casualties, such insurance may not be sufficient to cover all of our potential losses and may not continue to be available to us on acceptable terms, or at all.

- 26 -

Table of Contents

Delaware law, provisions in our charter and our shareholder rights plan could make it difficult for another company to acquire us.    Provisions of our certificate of incorporation may have the effect of delaying or preventing changes in control or management which might be beneficial to us or our security holders. In particular, our board of directors is divided into three classes, serving for staggered three-year terms. Because of this classification it will require at least two annual meetings to elect directors constituting a majority of our board of directors.

Additionally, our board of directors has the authority to issue up to 2,000,000 shares of preferred stock and to determine the price, rights, preferences, privileges and restrictions, including voting rights, of those shares without further vote or action by the stockholders. Under our stockholder rights plan, we have also issued purchase rights to the holders of our common stock that entitle those holders to purchase our Series A Junior Participating Preferred Stock at a discount, under certain circumstances. The rights of the holders of our common stock will be subject to, and may be adversely affected by, the rights of the holders of any preferred stock that may be issued in the future. The issuance of preferred stock may have the effect of delaying, deferring or preventing a change in control, may discourage bids for our common stock at a premium over the market price of our common stock and may adversely affect the market price of our common stock and the voting and other rights of the holders of our common stock.

You may not be able to enforce the judgments of U.S. courts against some of our assets or officers and directors.    A substantial portion of our assets are located outside the United States. Additionally, two of our eight directors and three of our seven executive officers reside outside the United States, along with all or a substantial portion of the assets of these persons. As a result, it may not be possible for investors to enforce judgments of U.S. courts relating to any liabilities under U.S. securities laws against our assets, those persons or their assets. In addition, we have been advised by our Australian counsel that some doubt exists as to the ability of investors to pursue claims based on U.S. securities laws against these assets or these persons in Australian courts.

Our principal executive offices and U.S. distribution facilities, consisting of approximately 144,000 square feet, are located in Poway (North San Diego County), California in a building we own. We lease facilities consisting of approximately 120,000 square feet for our research and development operations at North Ryde, in Sydney, Australia. We own our principal manufacturing facility consisting of a 215,000 square foot complex at Norwest, also in Sydney, Australia and lease in Canoga Park, California a 35,500 square foot facility for manufacture of electronic motors. On July 7, 2005, we purchased a 9.78 acre parcel of land at Kearney Mesa, San Diego for $21.0 million to develop our new corporate headquarters.

Sales and warehousing facilities are either leased or owned in Abingdon, England; Munich, Germany; Bremen, Germany; Hochstadt, Germany; Lyon, France; Paris, France; Basel, Switzerland; Trollhaettan, Sweden; Villach and Vienna, Austria; Helsinki, Finland; Den Haag, Netherlands; Oslo, Norway and Singapore.

In the normal course of business, we are subject to routine litigation incidental to our business. While the results of this litigation cannot be predicted with certainty, we believe that their final outcome will not have a material adverse effect on our consolidated financial statements taken as a whole.

During September and October 2004, we began receiving tax assessment notices for the audit of one of our German subsidiaries by the German tax authorities for the years 1996 through 1998. Certain of

- 27 -

Table of Contents

these adjustments are being contested and appealed to the German tax authority office. We believe no additional provision is necessary for any tax adjustment that may result from the tax audit. However, the outcome of the audit cannot be predicted with certainty. Should any tax audit issues be resolved in a manner not consistent with management’s expectations, we could be required to adjust our provision for income tax in the period of resolution.

On December 23, 2002, three former contractors of our subsidiary MAP Medizin-Technologie GmbH initiated proceedings in Munich 1 Regional Court (Proceedings No. 7 O 23286/02), petitioning the Court for a declaration of inventorship with respect to MAP German Patent Applications identified as No. 100 31 079 and 101 92 802.5 and European Patent Application No. EP 01 967 819.7. On March 10, 2005, the Court entered judgement in favor of the plaintiffs, finding that they should be identified as co-inventors in place of certain individual defendants. In April 2005, MAP filed an appeal of that decision. We do not expect the outcome of this litigation to have an adverse material effect on our consolidated financial statements.

In March 2006, an Australian university made a demand that we pay extra royalties pursuant to a current patent license agreement. We rejected the demand and the University has agreed to discuss our position. We do not consider the claim to have merit. We do not expect that the outcome of this demand to have an adverse material effect on our consolidated financial statements.

None.

- 28 -

Table of Contents

PART II

Our common stock is traded on the New York Stock Exchange (NYSE) under the symbol “RMD”. The following table sets forth for the fiscal periods indicated the high and low closing prices for the common stock as reported by the New York Stock Exchange.

As of August 23, 2006, there were 48 holders of record of our common stock. We have not paid any cash dividends on our common stock since the initial public offering of our common stock and we do not currently intend to pay cash dividends in the foreseeable future. We anticipate that all of our earnings and other cash resources, if any, will be retained for the operation and expansion of our business and for general corporate purposes.

All share and per share information has been adjusted to reflect the two-for-one stock split effected in the form of a 100% stock dividend that was declared on August 10, 2005 and distributed on September 30, 2005.

Sale of Unregistered Securities

During fiscal year 2006, and pursuant to the Indenture dated June 20, 2001 between us and American Stock Transfer & Trust Company, as trustee, holders of all of our 4% Convertible Subordinated Notes (“the Notes”) due 2006 converted the Notes into an aggregate of approximately 3,737,593 shares of our common stock, par value $0.004, based on a conversion price of $30.30 per share. The shares of common stock were issued solely to existing security holders upon conversion of the Notes pursuant to the exemption from registration provided under Section 3(a)(9) of the Securities Exchange Act 1993, as amended. We did not pay or give, directly or indirectly, any commission or other remuneration for soliciting such conversion.

- 29 -

Table of Contents

Purchases of Equity Securities

The following table summarizes purchases by us of our common stock during the year ended June 30, 2006:

⁽¹⁾ On June 6, 2002, the Board of Directors authorized us to repurchase up to 8.0 million shares of our outstanding common stock. There is no expiration date for the repurchase of these shares. For the years ended June 30, 2006 and 2005, we repurchased NIL and 482,000 shares at a cost of $NIL and $11.0 million, respectively. At June 30, 2006, we have repurchased a total of 2,254,918 shares at a cost of $41.4 million. We may continue to repurchase shares of our common stock for cash in the open market, or in negotiated or block transactions, from time to time as market and business conditions warrant.

- 30 -

Table of Contents

The following table summarizes certain selected consolidated financial data for, and as of the end of, each of the fiscal years in the five-year period ended June 30, 2006. The data set forth below should be read in conjunction with the Management’s Discussion and Analysis of Financial Condition and Results of Operations and our Consolidated Financial Statements and related Notes included elsewhere in this Report. The consolidated statements of operations data for the years ended June 30, 2006, 2005 and 2004 and the balance sheet data as of June 30, 2006 and 2005 are derived from our audited consolidated financial statements included elsewhere in this Report. The consolidated statements of operations data for the years ended June 30, 2003 and 2002 and the balance sheet data as of June 30, 2004, 2003 and 2002 are derived from our audited consolidated financial statements not included herein. Historical results are not necessarily indicative of the results to be expected in the future, and the results for the years presented should not be considered indicative of our future results of operations.

- 31 -

Table of Contents

All share and per share information has been adjusted to reflect the two-for-one stock split effected in the form of a 100% stock dividend that was declared on August 10, 2005 and distributed on September 30, 2005.

Overview

Management’s discussion and analysis of financial condition and results of operations should be read in conjunction with selected financial data and consolidated financial statements and notes, included herein. This discussion contains forward-looking statements that involve risks and uncertainties. Our actual results may differ materially from those anticipated in these forward-looking statements due to known and unknown risks, uncertainties and other factors, including those risks discussed in “Risk Factors” and elsewhere in this report.

We are a leading developer, manufacturer and distributor of medical equipment for treating, diagnosing, and managing sleep-disordered breathing and other respiratory disorders. Sleep-disordered breathing, or SDB, includes obstructive sleep apnea, or OSA, and other respiratory disorders that occur during sleep. When we were formed in 1989, our primary purpose was to commercialize a treatment for OSA developed by Professor Colin Sullivan. This treatment, nasal Continuous Positive Airway Pressure, or CPAP, was the first successful noninvasive treatment for OSA. CPAP systems deliver pressurized air, typically through a nasal mask, to prevent collapse of the upper airway during sleep.

We have invested significant resources in research and development and product enhancement. Since the development of CPAP, we have developed a number of innovative products for SDB and other respiratory disorders including airflow generators, diagnostic products, mask systems, headgear and other accessories. Our growth has been fuelled by geographic expansion, increased awareness of respiratory conditions as a significant health concern among physicians and patients, and our research and product development effort.

We currently employ approximately 2,500 people and market our products in over 67 countries using a network of distributors, independent manufacturers’ representatives and our direct sales force. We market our products primarily to home health care dealers and sleep clinics. We attempt to tailor our marketing approach to each national market, based on regional awareness of SDB as a health problem, physician referral patterns, consumer preferences and local reimbursement policies.

Our principal manufacturing facility is located in Sydney, Australia, and we have additional manufacturing facilities in Munich, Germany, Combs La Ville, France and Canoga Park, California. Our manufacturing operations consist primarily of assembly and testing of our flow generators, masks and accessories. Of the numerous raw materials, parts and components purchased for assembly of our therapeutic and diagnostic sleep disorder products, most are off-the-shelf items available from multiple vendors. We generally manufacture to our internal sales forecasts and fill orders as received.

- 32 -

Table of Contents

Business Acquisitions

Fiscal year ended June 30, 2006

PolarMed Holding AS (“PolarMed”).    On December 1, 2005, we acquired 100% of the outstanding stock of PolarMed, the holding company for PolarMed AS and its affiliates, for net cash consideration of $6.5 million. This consisted of $6.8 million in consideration less $0.3 million of cash acquired. Additionally, as part of the acquisition we assumed debt of $1.5 million. Under the purchase agreement, we may also be required to make additional future payments of up to $3.0 million based on the achievement of certain performance milestones following the acquisition through December 31, 2008. The acquisition and the immediate repayment of the majority of the assumed debt were funded with cash on hand.

PolarMed is predominantly a Norwegian based company, with affiliated operations based in Sweden and Denmark, which distributes medical equipment and associated services for the treatment of sleep and respiratory patients. PolarMed was our Norwegian distributor before the acquisition, and the acquisition is consistent with our strategy for ongoing expansion of our international operations.

The acquisition has been accounted for using purchase accounting and has been included within our consolidated financial statements from December 1, 2005. An amount of $4.4 million, representing the excess of the purchase price over the fair value of identifiable net assets acquired of $2.4 million, has been recorded as goodwill, which will not be tax deductible under Norwegian tax law. The cost of the acquisition was allocated to the assets acquired and liabilities assumed based on estimates of their respective fair values at the date of acquisition. We have not yet completed the purchase price allocation, as the appraisals associated with the valuation of certain tangible assets are not yet complete. We do not believe that the appraisals will materially modify the preliminary purchase price allocation. We expect to complete our purchase price allocation in the quarter ending September 30, 2006.

Pulmomed Medizinisch-Technische Geräte GmbH (“Pulmomed”).    On July 1, 2005, we acquired 100% of the outstanding stock of Pulmomed for net cash consideration of $2.5 million, including acquisition costs. Additionally, as part of the acquisition we assumed debt of $1.0 million. Under the purchase agreement, we may also be required to make additional future payments of up to $0.9 million based on the achievement of certain performance milestones following the acquisition through June 30, 2007.

Pulmomed is an Austrian based company that distributes medical equipment and associated services for the treatment of sleep and respiratory patients. The acquisition of Pulmomed is consistent with our strategy for ongoing expansion of our international operations.

The acquisition has been accounted for using purchase accounting and has been included within our consolidated financial statements from July 1, 2005. An amount of $1.8 million, representing the excess of the purchase price over the fair value of identifiable net assets acquired of $0.7 million, has been recorded as goodwill, which will not be tax deductible under Austrian tax law. The cost of the acquisition was allocated to the assets acquired and liabilities assumed based on estimates of their respective fair values at the date of acquisition. The fair values were determined by an independent appraisal and internal studies.

Of the potential additional future payments included within the purchase agreement, $0.3 million was accrued at June 30, 2006 as a result of the successful achievement of a performance milestone. The impact of this accrual was to increase the total acquisition consideration to $2.8 million from $2.5 million and to increase the amount recorded as goodwill by $0.3 million to $2.1 million.

- 33 -

Table of Contents

Fiscal year ended June 30, 2005

Saime SAS (“Saime”).    We acquired 100% of the outstanding stock of Financiere ACE SAS, the holding company for Saime and its affiliates, on May 19, 2005, for net cash consideration of $40.6 million. This consisted of $51.1 million in consideration, including acquisition costs, less $10.5 million of cash acquired. At June 30, 2005, we had not yet completed the purchase price allocation as the appraisals associated with the valuation of certain tangible assets were not yet complete. The fair values have now been finalized based on the receipt and evaluation of independent appraisals. The impact of the completion of the purchase price allocation was to increase the fair value of the acquired fixed assets by approximately $0.7 million to $2.9 million, increase the fair value of acquired liabilities, including deferred tax liabilities, by approximately $0.4 million to $91.7 million, increase the fair value of acquired deferred tax assets by approximately $1.2 million to $2.0 million and to decrease the amount recorded as goodwill by $1.5 million to $64.8 million. The acquisition has been accounted for using purchase accounting and has been included within our consolidated financial statements from May 19, 2005.

Hoefner Medizintechnick GmbH (“Hoefner”).    We acquired 100% of the outstanding stock of Hoefner on February 14, 2005, for net cash consideration of $8.2 million. This consisted of the $10.7 million in total consideration, including acquisition costs, less $2.5 million of cash acquired. Under the purchase agreement, additional future payments of up to $0.9 million are possible based on the achievement of certain performance milestones following the acquisition through December 31, 2006. Of these potential additional payments, $0.6 million was paid during the year ended June 30, 2006 as a result of the successful achievement of a performance milestone. The impact of this payment was to increase the total acquisition consideration to $11.3 million from $10.7 million and to increase the amount recorded as goodwill by $0.6 million to $8.8 million. The acquisition has been accounted for using purchase accounting and has been included within our consolidated financial statements from February 14, 2005.

Resprecare BV (“Resprecare”).    On December 1, 2004, we acquired substantially all the assets of Resprecare BV, our Dutch distributor, for initial consideration of $5.9 million in cash, including acquisition costs. The acquisition of the exclusive Dutch distributor is consistent with our strategy for ongoing expansion of our international operations. Under the purchase agreement, we potentially were also required to make up to $1.4 million of additional future payments based on the achievement of certain milestones. Of these potential additional payments, $0.6 million was paid in January 2005 as a result of the successful achievement of a performance milestone and a further $0.7 million was accrued at June 30, 2005 as a result of the integration of the Dutch subsidiary of our subsidiary MAP with the newly-acquired Resprecare business. The final payment of $0.7 million was made in January 2006.

The acquisition was accounted for using purchase accounting and accordingly, the results of operations of Resprecare were included within our consolidated financial statements from December 1, 2004. An amount of $4.4 million, representing the excess of the purchase price over the fair value of identifiable net assets acquired of $2.8 million, was recorded as goodwill, which is tax deductible. An independent third party has completed a valuation of identifiable intangible assets associated with the Resprecare acquisition. As a result of this valuation, $1.7 million was recorded as a customer relationship intangible asset and is being amortized over its estimated useful life of seven years.

Fiscal year ended June 30, 2004

Respro Medical Company Limited (“Respro”).    On July 2, 2003 we acquired the assets of Respro, our Hong Kong distributor, for total consideration of $184,000 in cash. The acquisition has been

- 34 -

Table of Contents

accounted for using purchase accounting and accordingly, the results of operations of Respro have been included within our consolidated financial statements from July 2, 2003. An amount of $89,000, representing the excess of the purchase price over the fair value of net identifiable assets acquired of $95,000, has been recorded as goodwill.

In-Process Research and Development Charge (“IPR&D”)

On acquisition of Saime in May 2005, we recognized as an expense a charge of $5.3 million with respect to IPR&D programs under active development by Saime that, at date of acquisition, had not reached technological feasibility and had no alternative future use. The estimated fair value assigned to IPR&D was based on an independent appraisal and was comprised of the following projects (in thousands):

The value of IPR&D was calculated by identifying research projects in areas for which technological feasibility had not been established, estimating the costs to develop the purchased in-process technology into commercially viable products, estimating the resulting net cash flows from such products, discounting the net cash flows to present value, and applying the reduced percentage completion of the projects thereto. The discount rate used in the analysis was 25%, which was based on the risk profile of the acquired assets.

As of the date of acquisition, these projects had estimated costs to complete totaling approximately $5.3 million. The projects were in various stages of development but are expected to reach completion at various dates ranging from one to three years.

We believe that the assumptions used to value the acquired intangible assets were reasonable at the time of acquisition. No assurance can be given, however, that the underlying assumptions used to estimate expected project revenues, development costs or profitability, or events associated with such projects, will transpire as estimated. For these reasons, among others, actual results may vary from the projected results.

Stock-Based Compensation Costs

We have granted stock options to personnel, including officers and directors, under both our 1995 Option Plan and our 1997 Equity Participation Plan, which we refer to collectively as the Plans. These options have expiration dates of ten years from the date of grant and vest over three or four years. We granted these options with an exercise price equal to the market value as determined at the date of grant. We have also offered to our personnel, including officers and directors, the right to purchase shares of our common stock at a discount under our employee stock purchase plan, or ESPP.

Prior to July 1, 2005, we applied APB Opinion No. 25, “Accounting for Stock Issued to Employees” and related Interpretations, in accounting for our equity plans. For periods prior to July 1, 2005, we complied with the disclosure only provisions of SFAS No. 123, “Accounting for Stock-Based Compensation”, or SFAS 123. No stock-based employee compensation cost was reflected in net income, as all options granted under those plans had an exercise price equal to the market value of the

- 35 -

Table of Contents

underlying common stock on the date of grant (or within permitted discounted prices as it pertains to the ESPP). Results for periods before July 1, 2005 have not been restated to reflect, and do not include the impact of, SFAS No. 123(R), “Share Based Payment”, or SFAS 123(R). While our financial statements through June 30, 2005 account for stock option grants pursuant to APB No. 25, in accordance with SFAS No. 123, we disclose in the notes to our financial statements the pro forma impact on our net income had we accounted for stock option grants using the fair value based method of accounting.

As of July 1, 2005, we adopted SFAS No. 123(R), using the modified prospective method, which requires measurement of compensation expense of all stock-based awards at fair value on the date of grant and amortization of the fair value over the vesting period of the award. Under the prospective method, the provisions of SFAS 123(R) apply to all awards granted or modified after the date of adoption. In addition, the unrecognized expense of awards not yet vested at the date of adoption, determined under the original provisions of SFAS No. 123, shall be recognized in net income in the periods after adoption. The fair value of stock options is determined using the Black-Scholes valuation model, which is consistent with valuation techniques previously utilized for options in footnote disclosures required under SFAS No. 123, as amended by SFAS No. 148 “Accounting for Stock-Based Compensation – Transition and Disclosure”. Such value is recognized as expense over the service period, net of estimated forfeitures, using the graded attribution method for stock-based awards granted prior to July 1, 2005 and the straight-line method for stock-based awards granted after July 1, 2005.

The application of SFAS 123(R) had the following effect on reported amounts relative to amounts that would have been reported under previous accounting (in thousands, except per share data):

- 36 -

Table of Contents

The fair value of stock options granted under our stock option plans and purchase rights granted under our ESPP is estimated on the date of the grant using the Black-Scholes option-pricing model with the following weighted average assumptions:

Expected volatilities are based on a combination of historical volatilities of our stock and implied volatilities from traded options of our stock. The expected life represents the weighted average period of time that options granted are expected to be outstanding giving consideration to vesting schedules and our historical exercise patterns. The risk-free rate is based on the U.S. Treasury yield curve in effect at the time of grant for periods corresponding with the expected life of the option.

The guidance in SFAS No. 123(R) is relatively new, and best practices are not well established. The application of these principles may be subject to further interpretation and refinement over time. There are significant differences among option valuation models, and this may result in a lack of comparability with other companies that use different models, methods and assumptions. If factors change and we employ different assumptions in the application of SFAS No. 123(R) in future periods, or if we decide to use a different valuation model, the compensation expense that we record in the future under SFAS No. 123(R) may differ significantly from what we have recorded in the current period and could materially affect our operating income, net income and net income per share.

Tax Expense

Our income tax rate is governed by the laws of the regions in which our income is recognized. To date, a substantial portion of our income has been subject to income tax in Australia where the statutory rate was 30% in fiscal year 2006, 2005 and 2004. During fiscal years 2006, 2005 and 2004, our effective tax rate has fluctuated between approximately 32.3% and approximately 33.9%. These fluctuations have resulted from, and future effective tax rates will depend upon, numerous factors, including the amount of research and development expenditures for which a 125% Australian tax deduction is available, the level of non-deductible expenses, and other tax credits or benefits available to us under applicable tax laws.

During the fourth quarter of fiscal year 2006, we made the decision to repatriate earnings from certain foreign subsidiaries to take advantage of a temporary incentive under the American Jobs Creation Act of 2004. This temporary incentive provides an 85% exclusion from U.S. taxable income for qualifying dividends received from controlled foreign corporations. The repatriation of $75 million resulted in a one-time additional income tax expense of $3.5 million for the year ended June 30, 2006. The repatriation of these funds to the United States provides us with increased flexibility in the utilization of cash to further its strategic objectives.

- 37 -

Table of Contents

We account for income taxes under the asset and liability method. Deferred tax assets and liabilities are recognized for the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled. The effect on deferred tax assets and liabilities of a change in tax rates is recognized in income in the period that includes the enactment date.

Fiscal Year Ended June 30, 2006 Compared to Fiscal Year Ended June 30, 2005

Net Revenues.    Net revenue increased for the year ended June 30, 2006 to $607.0 million from $425.5 million for the year ended June 30, 2005, an increase of $181.5 million or 43%. The increase in net revenue was attributable to an increase in unit sales of our flow generators, masks and accessories and incremental sales contributed from acquisitions. Sales were negatively impacted by the appreciation of international currencies against the U.S. dollar (decreasing sales by approximately $11.3 million).

Excluding the impact of acquisitions and unfavourable foreign currency movements sales for the year ended June 30, 2006 increased by 32% compared to the year ended June 30, 2005. Net revenue in North and Latin America increased for the year ended June 30, 2006 to $321.0 million from $218.1 million for the year ended June 30, 2005, an increase of $102.9 million or 47%. This growth has been generated by increased public and physician awareness of sleep-disordered breathing together with our continued investment in our sales force and marketing initiatives. Recent product releases, in particular our Mirage Swift mask and S8 flow generator platform, have also contributed strongly to our sales growth.

Net revenue in markets outside the Americas increased for the year ended June 30, 2006 to $286.0 million from $207.4 million for the years ended June 30, 2006 and 2005 respectively, an increase of 38%. International sales growth for the year ended June 30, 2006 reflects organic growth in the overall sleep-disordered breathing market and the recent acquisitions of Resprecare, Hoefner, Saime, PolarMed and Pulmomed. These acquisitions contributed incremental revenue of $52.7 million for the year ended June 30, 2006. Excluding the impact of acquisitions and unfavourable foreign currency movements, international sales for the year ended June 30, 2006 grew by 17% compared to the year ended June 30, 2005.

Sales of flow generators for the year ended June 30, 2006 totaled $316.6 million, an increase of 51% compared to the year ended June 30, 2005, including increases of 47% in North and Latin America and 53% elsewhere. Sales of mask systems, motors and other accessories totaled $290.4 million, an increase of 35%, including increases of 47% in North and Latin America and 16% elsewhere, for the year ended June 30, 2006, compared to the year ended June 30, 2005. These increases primarily reflect growth in the overall sleep-disordered breathing market, acquisitions during the year, and new product releases, particularly the Mirage Swift and our new flow generator platform, the S8.

Gross Profit.    Gross profit increased for the year ended June 30, 2006 to $376.9 million from $274.9 million for the year ended June 30, 2005, an increase of $102.0 million or 37%. Gross profit as a percentage of net revenue decreased for the year ended June 30, 2006 to 62% from 65% for the year ended June 30, 2005. The reduction in gross margin reflects the change in product and geographical mix of sales with a higher proportion of sales in flow generators, which generate lower margins relative to our mask sales, and higher North and Latin American sales, which also typically generate lower margins relative to our international sales, as well as the additional stock-based compensation costs. Stock-based compensation expenses of $0.9 million have been included within cost of sales for the year ended June 30, 2006 as compared to no stock-based compensation expense for the year ended June 30, 2005.

- 38 -

Table of Contents

Selling, General and Administrative Expenses.    Selling, general and administrative expenses increased for the year ended June 30, 2006 to $200.2 million from $135.7 million for the year ended June 30, 2005, an increase of $64.5 million or 48%. As a percentage of net revenue, selling, general and administrative expenses for the year ended June 30, 2006 was 33%, marginally higher than 32% in the year ended June 30, 2005. Stock-based compensation expenses of $12.4 million have been included within selling, general and administrative expenses for the year ended June 30, 2006. Excluding the impact of stock-based compensation expenses, as a percentage of net revenue, selling, general and administrative expenses for the year ended June 30, 2006 were 31%, which is marginally lower than 32% in the year ended June 30, 2005.

The increase in selling, general and administrative expenses was primarily due to stock-based compensation costs, an increase in the number of sales and administrative personnel to support our growth, the acquisitions of Resprecare, Hoefner, Saime, PolarMed and Pulmomed, continued infrastructure investment, particularly in our European businesses, and other expenses related to the increase in our sales. As a percentage of net revenue, we expect our future selling, general and administrative expense to continue in the historical range of 31% to 34%.

Research and Development Expenses.    Research and development expenses increased for the year ended June 30, 2006 to $37.2 million from $30.0 million for the year ended June 30, 2005, an increase of $7.2 million or 24%. As a percentage of net revenue, research and development expenses were 6% for the year ended June 30, 2006 compared to 7% for the year ended June 30, 2005. Stock-based compensation costs of $2.0 million have been included within research and development expenses for the year ended June 30, 2006. As a percentage of net revenue, we expect our future research and development expense to continue in the range of 5% to 7%.

Donations to Foundations.    In the years ended June 30, 2006 and 2005, we donated $0.8 million and $0.5 million, respectively, to the ResMed Foundation in the United States, and the ResMed Foundation in Australia. The Foundations’ overall mission includes the education of both the public and physicians about the inherent dangers of untreated SDB/OSA, particularly as it relates to cerebrovascular and cardiovascular disease.

In-process Research and Development Charge.    No in-process research and development charge was incurred for the year ended June 30, 2006. For the year ended June 30, 2005, purchased in-process research and development of $5.3 million was expensed upon the acquisition of Saime as technological feasibility of the products under development had not been established and no further alternative uses existed. The nature of this charge is explained in further detail in note 20 to the consolidated financial statements.

Amortization of Acquired Intangible Assets.    Amortization of acquired intangible assets for the year ended June 30, 2006 totaled $6.3 million compared to $0.9 million for the year ended June 30, 2005. The amortized amounts in 2006 related to acquired intangible assets associated with the acquisitions of Pulmomed, PolarMed, Saime, Hoefner and Resprecare.

Restructuring Expenses.    Restructuring expenses incurred for the year ended June 30, 2006 were $1.1 million compared to $5.2 million for the year ended June 30, 2005. Restructuring expenses for 2006 consisted of restructure charges associated with our integration of the separate operations of ResMed Germany and MAP into a single operating unit. We have completed the relocation of our ResMed Germany operation, previously located in Moenchengladbach, to Munich and associated integration of the back office functions including customer service, logistics and administration. We plan to continue to monitor the progress of this restructure and adjust our business strategies and personnel accordingly in an effort to maximize efficiencies and cost savings.

- 39 -

Table of Contents

Other Income (Expense), Net.    Other income, net for the year ended June 30, 2006 was $2.1 million, an increase of $2.8 million from other expense, net of $0.7 million for the year ended June 30, 2005. This was predominantly due to higher interest income on additional cash balances and the lower interest expense due to the reduction in our convertible debt, which was converted into equity during the quarter ended March 31, 2006. Other factors included higher foreign currency gains on foreign currency transactions and hedging offset by an impairment loss of $1.2 million on one of our cost method investments.

Income Taxes.    Our effective income tax rate increased to approximately 33.9% for the year ended June 30, 2006 from approximately 33.0% for the year ended June 30, 2005. This was primarily due to the one-time additional income tax expense of $3.5 million associated with the repatriation of $75 million in dividends received from certain controlled foreign corporations. These dividend payments were made to take advantage of a temporary tax incentive under the American Jobs Creation Act of 2004, which provides an 85% exclusion from U.S. taxable income for qualifying dividends. The repatriation of these funds to the United States provides us with increased flexibility in the utilization of cash to further our strategic objectives.

Excluding the impact of the one-time additional income tax expense of $3.5 million relating to the dividend repatriation, the effective tax rate for the year ended June 30, 2006 was 31.2%. This compares to an adjusted effective tax rate of approximately 31.2% for the year ended June 30, 2005 when excluding the impact of the non-deductible in-process research and development charge of $5.3 million incurred in the prior year. We continue to benefit from the Australian corporate tax rate of 30% and certain Australian research and development tax benefits because we generate a majority of our taxable income in Australia.

Net Income.    As a result of the factors above, our net income for the year ended June 30, 2006 was $88.2 million or $1.16 per diluted share compared to net income of $64.8 million or $0.91 per diluted share for the year ended June 30, 2005. The net after tax impact of stock-based compensation costs, restructuring expenses, in-process research and development charge, amortization of acquired intangible assets and the repatriation of funds described above resulted in a reduction of diluted earnings per share of $0.26 and $0.12 on an after-tax basis, respectively, for the years ended June 30, 2006 and 2005.

Fiscal Year Ended June 30, 2005 Compared to Fiscal Year Ended June 30, 2004

Net Revenues.    Net revenue increased for the year ended June 30, 2005 to $425.5 million from $339.3 million for the year ended June 30, 2004, an increase of $86.2 million or 25%. The increase in net revenue was attributable to an increase in unit sales of our flow generators, masks and accessories. Sales also benefited from an appreciation of international currencies against the U.S. dollar (increasing sales by approximately $10.4 million). Net revenue in North and Latin America increased for the year ended June 30, 2005 to $218.1 million from $166.1 million for the year ended June 30, 2004, an increase of $52.0 million or 31%. This growth has been generated by increased public and physician awareness of sleep-disordered breathing together with our continued investment in our sales force and marketing initiatives. Product releases during the year, in particular our Mirage Swift mask, have also contributed strongly to our sales growth.

Net revenue in markets outside the Americas increased for the year ended June 30, 2005 to $207.4 million from $173.2 million for the years ended June 30, 2005 and 2004 respectively, an increase of 20%. International sales growth for the year ended June 30, 2005 reflects organic growth in the overall sleep-disordered breathing market, appreciation of international currencies against the U.S. dollar and the acquisition during the year of Resprecare, Hoefner and Saime. These acquisitions contributed incremental revenue of $11.5 million for the year ended June 30, 2005. Excluding the impact of acquisitions, international sales grew by 13%.

- 40 -

Table of Contents

Sales of flow generators for the year ended June 30, 2005 totaled $209.8 million, an increase of 24% compared to the year ended June 30, 2004, including increases of 22% in North and Latin America and 25% elsewhere. Sales of mask systems, motors and other accessories totaled $215.7 million, an increase of 27%, including increases of 38% in North and Latin America and 12% elsewhere, for the year ended June 30, 2005, compared to the year ended June 30, 2004. These increases primarily reflect growth in the overall sleep-disordered breathing market, acquisitions during the year, appreciation of international currencies against the U.S. dollar and new product releases.

Gross Profit.    Gross profit increased for the year ended June 30, 2005 to $274.9 million from $216.7 million for the year ended June 30, 2004, an increase of $58.2 million or 27%. Gross profit as a percentage of net revenue increased for the year ended June 30, 2005 to 65% from 64% for the year ended June 30, 2004. The improvement in gross margin reflects a more favorable product mix due to increased sales of higher margin mask products and new product introductions.

Selling, General and Administrative Expenses.    Selling, general and administrative expenses increased for the year ended June 30, 2005 to $135.7 million from $104.7 million for the year ended June 30, 2004, an increase of $31.0 million or 30%. As a percentage of net revenue, selling, general and administrative expenses for the year ended June 30, 2005 was 32%, marginally higher than 31% in the year ended June 30, 2004. The increase in selling, general and administrative expenses was primarily due to an increase in the number of sales and administrative personnel to support our growth, the acquisitions of Resprecare, Hoefner and Saime, continued infrastructure investment, particularly in our European businesses, and other expenses related to the increase in our sales. The increase in selling, general and administrative expenses was also attributable to appreciation of international currencies against the U.S. dollar, which added approximately $4.0 million to our expenses as reported in U.S. dollars.

Research and Development Expenses.    Research and development expenses increased for the year ended June 30, 2005 to $30.0 million from $26.2 million for the year ended June 30, 2004, an increase of $3.8 million or 15%. As a percentage of net revenue, research and development expenses were 7% for the year ended June 30, 2005 compared to 8% for the year ended June 30, 2004. The increase in research and development expenses was primarily due to higher employee compensation and increased charges for consulting fees and technical assessments incurred to facilitate development of new products. The increase also reflects an appreciation of the Australian dollar against the U.S. dollar, as the majority of research and development costs are incurred in Australian dollars. The appreciation of international currencies against the U.S. dollar added approximately $1.3 million to our research and development expenses as reported in U.S. dollars.

Donations to Foundations.    In the years ended June 30, 2005 and 2004 we donated $0.5 million and $0.5 million, respectively, to the ResMed Foundation in the U.S., and the Resmed Foundation in Australia. The Foundations’ overall mission includes the education of both the public and physicians about the inherent dangers of untreated SDB/OSA, particularly as it relates to cerebrovascular and cardiovascular disease.

In-process Research and Development Charge.    Purchased in-process research and development of $5.3 million was expensed upon acquisition of Saime as technological feasibility of the products under development had not been established and no further alternative uses existed. The nature of this charge is explained more fully in note 20 to the consolidated financial statements.

Amortization of Acquired Intangible Assets.    Amortization of acquired intangible assets for the year ended June 30, 2005 totaled $0.9 million compared to $nil for the year ended June 30, 2004, and related to acquired intangible assets totaling $46.0 million associated with the acquisitions of Saime, Hoefner and Resprecare.

- 41 -

Table of Contents

Restructuring Expenses.    Restructuring expenses incurred for the year ended June 30, 2005 were $5.2 million and consisted of restructure charges associated with our integration of the separate operations of ResMed Germany and MAP into a single operating unit. We have completed the relocation of our ResMed Germany operation, previously located in Moenchengladbach, to Munich and associated integration of the back office functions including customer service, logistics and administration. We will continue to monitor the progress of this restructure and adjust our business strategies and personnel accordingly to achieve maximum efficiencies and cost savings.

Other Income (Expense), Net.    Other expense, net for the year ended June 30, 2005 was $0.7 million, consistent with the year ended June 30, 2004. In fiscal year 2005, other expense, net reflected lower net foreign currency exchange gains, partially offset by lower interest expense due to the reduction in our convertible note debt that occurred in the 2004 fiscal year.

Income Taxes.    Our effective income tax rate increased to approximately 33% for the year ended June 30, 2005 from approximately 32% for the year ended June 30, 2004. However, adding back the impact of the non-deductible in-process research and development charge of $5.3 million taken in the year ended June 30, 2005 would result in an adjusted effective tax rate of approximately 31%. The lower adjusted effective tax rate was primarily due to our geographical mix of taxable income. In particular, we continue to benefit from the Australian corporate tax rate of 30% and certain Australian R&D tax benefits because we generate a majority of our taxable income in Australia.

Net Income.    As a result of the factors above, our net income for the year ended June 30, 2005 was $64.8 million or $0.91 per diluted share compared to net income of $57.3 million or $0.82 per diluted share for the year ended June 30, 2004. The restructuring expenses, in-process research and development charge and amortization of acquired intangible assets described above resulted in a reduction of earnings per diluted share of $0.12 and $0.00 on an after-tax basis, respectively, for the years ended June 30, 2005 and 2004.

Liquidity and Capital Resources

As of June 30, 2006 and June 30, 2005, we had cash and cash equivalents of $219.5 million and $142.2 million, respectively. Working capital was $381.3 million and $141.7 million at June 30, 2006 and June 30, 2005, respectively. The increase in working capital predominantly reflects the conversion of our convertible subordinated notes into equity in March 2006 as well as the growth and profitability of the business during the year.

Inventories at June 30, 2006 increased by $27.1 million or 30% to $116.2 million compared to June 30, 2005 inventories of $89.1 million. The increase in inventories was lower than the increase of 43% in revenues in the year ended June 30, 2006 compared to the year ended June 30, 2005, which we believe reflects strong sales growth and improved working capital management.

Accounts receivable at June 30, 2006 were $138.1 million, an increase of $34.2 million or 33% over the June 30, 2005 accounts receivable balance of $104.0 million. Excluding the incremental increase from acquisitions, our accounts receivables have increased by $31.3 million or 30%. The increase was lower than the 43% incremental increase in revenues for the year ended June 30, 2006 compared to the year ended June 30, 2005 and predominantly reflects the impact of our acquisitions, as sales increased by 30% on an ex-acquisition basis. Accounts receivable days sales outstanding of 70 days at June 30, 2006 decreased by 1 day compared to 71 days at June 30, 2005. Our allowance for doubtful accounts as a percentage of total accounts receivable at June 30, 2006 and 2005 was 3.3% and 3.0%, respectively. The credit quality of our customers remains consistent with our past experience.

During the year ended June 30, 2006, we generated cash of $99.0 million from operations. This was higher than the cash generated from operations for the year ended June 30, 2005 of $71.1 million and

- 42 -

Table of Contents

was primarily the result of the increase in net income and improved working capital management. In addition, cash generated from operations for the year end June 30, 2006 was reduced by $9.8 million due to the initial adoption of SFAS 123(R) as tax benefits associated with employee stock options exercised during the year are required to be included within cash flows from financing activities. Prior to the adoption of SFAS 123(R), cash retained as a result of tax deductions relating to stock-based compensation was presented in operating cash flows, along with other tax cash flows.

Capital expenditures for the years ended June 30, 2006 and 2005 aggregated $102.7 million and $39.7 million respectively. The capital expenditures in the year ended June 30, 2006 primarily reflected the construction of our new manufacturing, research and development building, purchase of land in San Diego, office facilities, computer hardware and software, rental and loan equipment and purchase of production tooling equipment and machinery. As a result of these capital expenditures, our balance sheet reflects net property, plant and equipment of approximately $245.4 million at June 30, 2006 compared to $174.2 million at June 30, 2005.

We are currently building our new research and development and office facilities at our existing site in Sydney, Australia and expect to have this completed in September 2006. We estimate that the additional building and fit-out costs for the new research and development and office facilities will be approximately $12.9 million. We expect to fund the project through a combination of cash on hand and cash generated from operations.

On July 7, 2005, we purchased a 9.78-acre parcel of land in San Diego for $21.0 million. The new location at Kearney Mesa, San Diego will allow us to develop a new corporate headquarters. We are currently evaluating building options in relation to our new corporate headquarters.

Details of contractual obligations at June 30, 2006 are as follows:

Details of other commercial commitments at June 30, 2006 are as follows:

^*The above guarantees relate to guarantees required by statutory authorities as a pre-requisite to developing our site at Norwest and requirements under contractual obligations with insurance companies transacting with our German subsidiaries.

- 43 -

Table of Contents

During fiscal year 2006, and pursuant to the Indenture dated June 20, 2001 between us and American Stock Transfer & Trust Company, as trustee, holders of all of the 4% Convertible Subordinated Notes (“the Notes”) due 2006 converted the Notes into an aggregate of 3,737,593 shares of our common stock, par value $0.004. The Notes were converted into 33 shares of our common stock for each $1,000 principal amount of the Notes, at a conversion price of $30.30 per share. The dilutive impact of these conversions has been reflected in the reported earnings per share. With the conversion of the Notes we expect to realize interest expense savings in the future of approximately $2.2 million per annum.

On March 13, 2006, our wholly-owned subsidiaries ResMed Corp., Servo Magnetics Inc. and ResMed EAP Holdings Inc. entered into a Second Amended and Restated Revolving Loan Agreement with Union Bank of California, N.A. as administrative agent for the Lenders (the “Loan Agreement”), that provides for a revolving loan of up to $75 million. The Loan Agreement also contains customary covenants, including certain financial covenants and an obligation that we maintain certain financial ratios, including a maximum ratio of total debt to EBITDA (as defined in the Loan Agreement), a fixed charge coverage ratio, a minimum tangible net worth, and that certain of our subsidiaries maintain a minimum EBITDA and liquidity. We believe we are currently in compliance with all of these covenants. Draws under the revolving loans must be made before March 1, 2011, at which time all unpaid principal and interest under both loans must be repaid. The outstanding principal amount due under the loans will bear interest at a rate equal to LIBOR plus 0.75% to 1.00% (depending on the applicable leverage ratio). At June 30, 2006 there were no amounts outstanding under the Loan Agreement.

On June 8, 2006, our wholly-owned Australian subsidiary, ResMed Limited, entered into a Syndicated Facility Agreement with HSBC Bank Australia Limited as original financier, facility agent and security trustee, that provides for a loan in three tranches.

Tranche A is a EUR 50 million term loan facility that refinances all amounts outstanding under a previous syndicated facility agreement dated May 16, 2005 between ResMed Limited and HSBC Bank Australia Limited, to fund the obligations of our wholly-owned French subsidiary ResMed SA under its agreement to acquire Saime. Tranche A bears interest at a rate equal to LIBOR for deposits denominated in EUR plus a margin of 0.80% or 0.90%, depending on the ratio of the total debt to EBITDA of ResMed Inc. and its subsidiaries, which we refer to as the ResMed Group, for the most recently completed fiscal year for the applicable interest period. Payments of principal must be made to reduce the total outstanding principal amount of Tranche A to EUR 44.5 million on June 30, 2007, EUR 37.75 million on June 30, 2008, EUR 27.5 million on June 30, 2009, EUR 15 million on December 31, 2009, and the entire outstanding principal amount must be repaid in full on June 8, 2011. At June 30, 2006, the Tranche A facility loan had an amount outstanding of $61.7 million.

Tranche B is a USD 15 million term loan facility that may only be used for the purpose of financing capital expenditures and other asset acquisitions by the ResMed Group. Tranche B bears interest at a rate equal to LIBOR for deposits denominated in EUR, Australian dollars, USD, or Sterling plus a margin of 0.80% or 0.90%, depending on the ratio of the total debt to EBITDA of the ResMed Group for the most recently completed fiscal year for the applicable interest period. The entire principal amount must be repaid in full on June 8, 2011. At June 30, 2006, there were no amounts outstanding under the Tranche B facility loan agreement.

Tranche C is a USD 60 million term loan facility that may only be used for the purpose of the payment by ResMed Limited of a dividend to ResMed Holdings Limited, which will ultimately be paid to ResMed Inc. Tranche C bears interest at a rate equal to LIBOR for deposits denominated in EUR, Australian dollars or USD plus a margin of 0.70% or 0.80%, depending on the ratio of the total debt to EBITDA of the ResMed Group for the most recently completed fiscal year for the applicable

- 44 -

Table of Contents

interest period. Payments of principal must be made to reduce the total outstanding principal amount of Tranche C to USD 30 million on December 31, 2007 and the entire outstanding principal amount must be repaid in full by June 8, 2009. At June 30, 2006, the Tranche C facility loan had an amount outstanding of $58.6 million.

The Loan is secured by a pledge of one hundred percent of the shares of ResMed Inc.’s subsidiary, Saime SAS, pursuant to a Pledge Agreement. The Syndicated Facility Agreement also contains customary covenants, including certain financial covenants and an obligation that ResMed Limited maintain certain financial ratios, including a minimum debt service cover ratio, a maximum ratio of total debt to EBITDA and a minimum tangible net worth. The entire principal amount of the Loan and any accrued but unpaid interest may be declared immediately due and payable in the event of the occurrence of an event of default as defined in the Syndicated Facility Agreement. Events of default include, among other items, failure to make payments when due, breaches of representations, warranties or covenants, the occurrence of certain insolvency events, the occurrence of an event or change which could have a material adverse effect on ResMed Limited and its subsidiaries, and if ResMed Inc. ceases to control ResMed Limited, ResMed Corp., ResMed SAS, ResMed GmbH & Co. KG, ResMed (UK) Limited, Take Air Medical Handels-GmbH or Saime SAS.

Simultaneous with the Syndicated Facility Agreement, ResMed Limited entered into a working capital agreement with HSBC Bank Australia Limited for revolving, letter of credit and overdraft facilities up to a total commitment of 6.5 million Australian dollars for one year, and ResMed (UK) Limited entered into a working capital agreement with HSBC Bank plc for a revolving cash advance facility up to a total commitment of 3 million Sterling for one year.

We expect to satisfy all of our short-term liquidity requirements through a combination of cash on hand, cash generated from operations, our $75 million undrawn revolving line of credit with Union Bank of California and our $26.7 million undrawn facilities with HSBC.

The results of our international operations are affected by changes in exchange rates between currencies. Changes in exchange rates may negatively affect our consolidated net revenue and gross profit margins from international operations. We are exposed to the risk that the dollar value equivalent of anticipated cash flows would be adversely affected by changes in foreign currency exchange rates. We manage this risk through foreign currency option contracts.

Stock Split

On August 10, 2005, our Board of Directors declared a two-for-one split of our common stock which was effected in the form of a 100% stock dividend. Stockholders received one additional share of common stock for every share held of record on September 15, 2005. All share numbers and per share amounts contained in the consolidated financial statements and accompanying notes have been retroactively adjusted to reflect this stock split.

Critical Accounting Principles and Estimates

The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires us to make estimates and judgments that affect our reported amounts of assets and liabilities, revenues and expenses and related disclosures of contingent assets and liabilities. On an ongoing basis we evaluate our estimates, including those related to allowance for doubtful accounts, inventory reserves, warranty obligations, goodwill, impaired assets, intangible assets, income taxes, deferred tax valuation allowances, contingencies and stock-based compensation costs.

- 45 -

Table of Contents

We state these accounting policies in the notes to the financial statements and at relevant sections in this discussion and analysis. The estimates are based on the information that is currently available to us and on various other assumptions that we believe to be reasonable under the circumstances. Actual results could vary from those estimates under different assumptions or conditions.

We believe that the following critical accounting policies affect the more significant judgments and estimates used in the preparation of our financial statements:

(1)    Allowance for Doubtful Accounts.    We maintain an allowance for doubtful accounts for estimated losses resulting from the inability of our customers to make required payments, which results in bad debt expense. We determine the adequacy of this allowance by continually evaluating individual customer receivables, considering a customer’s financial condition, credit history and current economic conditions. If the financial condition of our customers were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances may be required.

(2)    Inventory Adjustments.    Inventories are stated at lower of cost or market and are determined by the first-in, first-out method. We review the components of inventory on a regular basis for excess, obsolete and impaired inventory based on estimated future usage and sales. The likelihood of any material inventory write-downs is dependent on changes in competitive conditions, new product introductions by us or our competitors, or rapid changes in customer demand.

(3)    Valuation of Goodwill, Intangible and Other Long-Lived Assets.    We use assumptions in establishing the carrying value, fair value and estimated lives of our goodwill, intangibles and other long-lived assets. The criteria used for these evaluations include management’s estimate of the asset’s continuing ability to generate positive income from operations and positive cash flow in future periods compared to the carrying value of the asset, as well as the strategic significance of any identifiable intangible asset in our business objectives. If assets are considered to be impaired, the impairment recognized is the amount by which the carrying value of the assets exceeds the fair value of the assets. Useful lives and related amortization or depreciation expense are based on our estimate of the period that the assets will generate revenues or otherwise be used by us. Factors that would influence the likelihood of a material change in our reported results include significant changes in the asset’s ability to generate positive cash flow, loss of legal ownership or title to the asset, a significant decline in the economic and competitive environment on which the asset depends, significant changes in our strategic business objectives, utilization of the asset, and a significant change in the economic and/or political conditions in certain countries.

(4)    Valuation of Deferred Income Taxes.    Valuation allowances are established, when necessary, to reduce deferred tax assets to the amount expected to be realized. The likelihood of a material change in our expected realization of these assets is dependent on future taxable income, our ability to deduct tax loss carryforwards against future taxable income, the effectiveness of our tax planning and strategies among the various tax jurisdictions that we operate in, and any significant changes in the tax treatment received on our business combinations.

(5)    Provision for Warranty.    We provide for the estimated cost of product warranties at the time the related revenue is recognized. The amount of this provision is determined by using a financial model, which takes into consideration actual, historical expenses and potential risks associated with our different products. This financial model is then used to calculate the future probable expenses related to warranty and the required level of the warranty provision. Although we engage in product improvement programs and processes, our warranty obligation is affected by product failure rates and costs incurred to correct those product failures. Should actual product failure rates or estimated costs to repair those product failures differ from our estimates, revisions to our estimated warranty provision would be required.

(6)    Revenue Recognition.    Revenue on product sales is recorded at the time of shipment, at which time title transfers to the customer. Revenue on product sales which require customer acceptance is

- 46 -

Table of Contents

not recorded until acceptance is received. Royalty revenue from license agreements is recorded when earned. Service revenue received in advance from service contracts is initially deferred and recognized ratably over the life of the service contract. Revenue received in advance from rental unit contracts is initially deferred and recognized ratably over the life of the rental contract. Revenue from sale of marketing and distribution rights is initially deferred and recognized ratably as revenue over the life of the contract. Freight charges billed to customers are included in revenue. All freight-related expenses are charged to cost of sales.

We do not recognize revenues to the extent that we offer a right of return or other recourse with respect to the sale of our products or similarly offer variable sale prices for subsequent events or activities. However, as part of our sales processes we may provide upfront discounts for large orders, one time special pricing to support new product introductions, sales rebates for centralized purchasing entities or price-breaks for regular order volumes. The costs of all such programs are recorded as an adjustment to revenue. In our domestic sales activities we use a number of Manufacturer representatives to sell our products. These representatives are paid a direct commission on sales and act as an integral component of our domestic sales force. We do not sell our products to these representatives, and do not recognize revenue on such shipments. Our products are predominantly therapy-based equipment and require no installation. As such, we have no significant installation obligations.

(7)    Stock-Based Compensation.    In accordance with SFAS 123(R), we measure the compensation of all stock-based awards at fair value on date of grant. Such value is recognized as compensation expense over the service period, net of estimated forfeitures. The estimation of stock awards that will ultimately vest requires judgment, and to the extent actual results differ from our estimates, such amounts will be recorded as a cumulative adjustment in the period estimates are revised. We consider many factors when estimating expected forfeitures, including the type of awards, employee class, and historical experience. Actual results may differ substantially from these estimates.

Recently Issued Accounting Pronouncements

In November 2005, the FASB issued FSP FAS123(R)-3, “Transition Election to Accounting for the Tax Effects of Share-Based Payment Awards”. This FSP requires an entity to follow either the transition guidance for the additional-paid-in-capital pool as prescribed in SFAS 123(R), or the alternative transition method as described in the FSP. We have made a one-time election to adopt the transition method described in this FSP which did not have a material impact on our financial statements.

In November 2005, the FASB issued FSP FAS115-1/124-1, “The Meaning of Other-Than-Temporary Impairment and Its Application to Certain Investments”, which addresses the determination as to when an investment is considered impaired, whether that impairment is other than temporary, and the measurement of an impairment loss. This FSP also includes accounting considerations subsequent to the recognition of an other-than-temporary impairment and requires certain disclosures about unrealized losses that have not been recognized as other-than-temporary impairments. The guidance in this FSP amends FASB Statements No. 115, “Accounting for Certain Investments in Debt and Equity Securities”, and FASB Statements No. 124 “Accounting for Certain Investments Held by Not-for-Profit Organizations”, and APB Opinion No. 18, “The Equity Method of Accounting for Investments in Common Stock”. We adopted this FSP during the fiscal year ended June 30, 2006 and it did not have a material impact on our financial statements.

In June 2006, the FASB issued FIN No. 48, “Accounting for Uncertainty in Income Taxes – an interpretation of FASB Statement No. 109”, which clarifies the accounting for uncertainty in income taxes recognized in the financial statements in accordance with FASB Statement No. 109, “Accounting for Income Taxes”. The interpretation prescribes a recognition threshold and

- 47 -

Table of Contents

measurement attribute for the financial statement recognition and measurement of a tax position taken or expected to be taken in a tax return. FIN No. 48 requires recognition of tax benefits that satisfy a greater than 50% probability threshold. It also provides guidance on derecognition, classification, interest and penalties, accounting in interim periods, disclosure, and transition. FIN No. 48 is effective for us beginning July 1, 2007. We are assessing the potential impact that the adoption of FIN No. 48 will have on our financial statements.

Foreign Currency Market Risk

Our functional currency is the U.S. dollar, although the financial statements of our non-U.S. subsidiaries are maintained in their respective local currencies. We transact business in various foreign currencies, including a number of major European currencies as well as the Australian dollar. We have significant foreign currency exposure through both our Australian manufacturing activities and international sales operations.

We have established a foreign currency hedging program using purchased currency options to hedge foreign-currency-denominated financial assets, liabilities and manufacturing expenditures. The goal of this hedging program is to economically guarantee or lock-in the exchange rates on our foreign currency exposures denominated in Euro’s and the Australian dollar. Under this program, increases or decreases in our foreign-currency-denominated financial assets, liabilities, and firm commitments are partially offset by gains and losses on the hedging instruments. We have determined our hedge program to be a non-effective hedge as defined under SFAS No. 133. The foreign currency derivatives portfolio is recorded in the consolidated balance sheets at fair value and included in other assets or other liabilities. All movements in the fair value of the foreign currency derivatives are recorded within other income, net on our consolidated statements of income.

- 48 -

Table of Contents

The table below provides information (in U.S. dollars) on our foreign-currency-denominated financial assets by legal entity functional currency as of June 30, 2006 (in thousands):