Form: 10-K

Annual report pursuant to Section 13 and 15(d)

August 8, 2014

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

FORM 10-K

 

[X] ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF

THE SECURITIES EXCHANGE ACT OF 1934

 

For the fiscal year ended June 30, 2014

 

Commission file number: 001-15317

 

RESMED INC.

(Exact name of registrant as specified in its charter)

 

DELAWARE

(State or other jurisdiction of incorporation or organization)

 

98-0152841

(IRS Employer Identification No.)

 

9001 Spectrum Center Blvd.

San Diego, CA 92123

United States of America

(Address of principal executive offices)

 

(858) 836-5000

(RegistrantÂ’s telephone number, including area code)

 

Securities registered pursuant to Section 12(b) of the Act:

TITLE OF EACH CLASS

Common Stock, $0.004 Par Value

 

Name of each exchange upon which registered

New York Stock Exchange

 

Securities registered pursuant to Section 12(g) of the Act

None

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes [ x ]    No [   ]

 

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act.    Yes [   ]    No [ x ]

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes [ x ]    No [   ]

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes [ x ]    No [   ]

 

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulations S-K (§ 229.405 of this Chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K [    ]

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer [ x ]    Accelerated filer [   ]    Non-accelerated filer [   ]    Smaller reporting company [   ]

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes [   ]    No [ x ]

 

The aggregate market value of the voting and non-voting common equity held by non-affiliates of registrant as of December 31, 2013 (the last business day of the registrant’s most recently completed second fiscal quarter), computed by reference to the closing sale price of such stock on the New York Stock Exchange, was $6,605,592,497. All directors, executive officers, and 10% stockholders of registrant are considered affiliates.

 

At August 1, 2014, registrant had 140,168,442 shares of Common Stock, $0.004 par value, issued and outstanding. This number excludes 36,641,013 shares held by the registrant as treasury shares.

 

Portions of the registrantÂ’s definitive Proxy Statement to be delivered to stockholders in connection with the registrantÂ’s 2014 Annual Meeting of Stockholders, to be filed subsequent to the date hereof, are incorporated by reference into Part III of this report.



 

CONTENTS

 


 

          Cautionary Note Regarding Forward Looking Statements      1   

Part I

   Item 1    Business      1   
     Item 1A    Risk Factors      20   
     Item 1B    Unresolved Staff Comments      30   
     Item 2    Properties      30   
     Item 3    Legal Proceedings      31   
     Item 4    Mine Safety Disclosures      32   

Part II

   Item 5    Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities      33   
     Item 6    Selected Financial Data      36   
     Item 7    Management’s Discussion and Analysis of Financial Condition and Results of Operations      38   
     Item 7A    Quantitative and Qualitative Disclosures About Market and Business Risks      48   
     Item 8    Consolidated Financial Statements and Supplementary Data      51   
     Item 9    Changes in and Disagreements with Accountants on Accounting and Financial Disclosure      51   
     Item 9A    Controls and Procedures      51   
     Item 9B    Other Information      54   

Part III

   Item 10    Directors, Executive Officers and Corporate Governance      55   
     Item 11    Executive Compensation      55   
     Item 12    Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters      55   
     Item 13    Certain Relationships and Related Transactions and Director Independence      55   
     Item 14    Principal Accounting Fees and Services      55   

Part IV

   Item 15    Exhibits and Consolidated Financial Statement Schedules      56   
          Signatures      S-1   

 

As used in this 10-K, the terms “we”, “us”, “our” and “the Company” refer to ResMed Inc., a Delaware corporation, and its subsidiaries, on a consolidated basis, unless otherwise stated.



PART I


 

Cautionary Note Regarding Forward-Looking Statements

 

This report contains certain forward-looking statements and information that are based on the beliefs of our management as well as estimates and assumptions made by, and information currently available to our management. All statements other than statements regarding historical facts are forward-looking statements. The words “believe,” “expect,” “anticipate,” “intend,” “seek,” “will,” “will continue,” “estimate,” “plan,” “future” and other similar expressions generally identify forward-looking statements, including, in particular, statements regarding the development and approval of new products and product applications, market expansion, pending litigation, and the development of new markets for our products, such as cardiovascular and stroke markets. These forward-looking statements are made under the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. You are cautioned not to place undue reliance on these forward-looking statements each of which applies only as of the date of this report. Such forward-looking statements reflect the views of our management at the time such statements are made and are subject to a number of risks, uncertainties, estimates and assumptions, including, without limitation, and in addition to those identified in the text surrounding such statements, those identified in Item 1A “Risk Factors” and elsewhere in this report.

 

In addition, important factors to consider in evaluating such forward-looking statements include changes or developments in social, economic, market, legal or regulatory circumstances, changes in our business or growth strategy or an inability to execute our strategy due to changes in our industry or the economy generally, the emergence of new or growing competitors, the actions or omissions of third parties, including suppliers, customers, competitors and governmental authorities, and various other factors subject to risks and uncertainties which could cause actual results to materially differ from those projected or implied in the forward-looking statements. Should any one or more of these risks or uncertainties materialize, or the underlying estimates or assumptions prove incorrect, actual results may vary significantly from those expressed in such forward-looking statements, and there can be no assurance that the forward-looking statements contained in this report will in fact occur.

 

ITEM 1 BUSINESS

 

General

 

We are a global leader in the development, manufacturing, distribution and marketing of medical products for the diagnosis, treatment and management of respiratory disorders, with a focus on sleep-disordered breathing, or SDB. SDB includes obstructive sleep apnea, or OSA, and other respiratory disorders that occur during sleep. When we were formed in 1989, our primary purpose was to commercialize a treatment for OSA. This treatment, nasal Continuous Positive Airway Pressure, or CPAP, was the first successful noninvasive treatment for OSA. CPAP systems deliver pressurized air, typically through a nasal mask, to prevent collapse of the upper airway during sleep.

 

Since the development of CPAP, we have developed a number of innovative products for SDB and other respiratory disorders including airflow generators, diagnostic products, mask systems, headgear and other accessories. Our growth has been fuelled by geographic expansion, our research and product development efforts, and an increasing awareness of SDB and respiratory conditions as a significant health concern among physicians and patients around the world.

 

We employ approximately 4,100 people and sell our products in approximately 100 countries through a combination of wholly owned subsidiaries and independent distributors.

 

- 1 -


Our web site address is www.resmed.com. We make our periodic reports, together with any amendments, available on our web site, free of charge, as soon as reasonably practicable after we electronically file or furnish the reports with the Securities and Exchange Commission, or SEC. Information contained on the website is not part of or incorporated into this annual report.

 

Corporate History

 

ResMed Inc., a Delaware corporation, was formed in March 1994 as the ultimate holding company for our operating subsidiaries. On June 1, 1995, we completed an initial public offering of common stock and on June 2, 1995 our common stock commenced trading on the NASDAQ National Market. On September 30, 1999 we transferred our principal public listing to the New York Stock Exchange, or NYSE, trading under the ticker symbol RMD. On November 25, 1999, we established a secondary listing of our common stock via Chess Depositary Instruments, or CDI’s, on the Australian Stock Exchange (now known as the Australian Securities Exchange), or ASX, also under the symbol RMD. Ten CDI’s on the ASX represent one share of our common stock on the NYSE.

 

Our Australian subsidiary, ResMed Holdings Limited, was originally organized in 1989 by Dr. Peter Farrell to acquire from Baxter Center for Medical Research Pty Limited, or Baxter, the rights to certain technology relating to CPAP treatment as well as Baxter’s existing CPAP device business. Baxter acquired the rights to the technology in 1987, and sold CPAP devices in Australia from 1988 until our acquisition of the business.

 

Since formation we have acquired a number of businesses including distributors, suppliers, developers of medical equipment and related technologies.

 

Segment Information

 

We believe that, given the single market focus of our operations in the sleep and respiratory disorders sector of the medical device industry, and the inter-dependence of its products, we operate in a single operating segment. See Note 15 – Segment Information of the Notes to Financial Statements (Part II, Item 8) for financial information regarding segment reporting. Financial information about our revenues from and assets located in foreign countries is also included in the Notes to our consolidated financial statements.

 

The Market

 

Sleep is a complex neurological process that includes two distinct states: rapid eye movement, or REM, sleep and non-rapid eye movement, or non-REM, sleep. REM sleep, which is about 20-25% of total sleep experienced by adults, is characterized by a high level of brain activity, bursts of rapid eye movement, increased heart and respiration rates, and paralysis of many muscles. Non-REM sleep is subdivided into four stages that generally parallel sleep depth; stage 1 is the lightest and stage 4 is the deepest.

 

The upper airway has no rigid support and is held open by active contraction of upper airway muscles. Normally, during REM sleep and deeper levels of non-REM sleep, upper airway muscles relax and the airway narrows. Individuals with narrow upper airways or poor muscle tone are prone to temporary collapses of the upper airway during sleep, called apneas, and to near closures of the upper airway called hypopneas. These breathing events result in a lowering of blood oxygen concentration, causing the central nervous system to react to the lack of oxygen or increased carbon dioxide and signaling the body to respond. Typically, the individual subconsciously arouses from sleep, causing the throat muscles to contract, opening the airway. After a few gasping breaths, blood oxygen levels increase and the individual can resume a deeper sleep until the cycle repeats itself. Sufferers of OSA

 

- 2 -


typically experience ten or more such cycles per hour. While these awakenings greatly impair the quality of sleep, the individual is not normally aware of these disruptions. In addition, OSA has recently been recognized as a cause of hypertension and a significant co-morbidity for heart disease, stroke and diabetes.

 

A 2013 epidemiology study estimated that 26% of adults age 30-70 have some form of obstructive sleep apnea. In the United States alone, this represents approximately 46 million people. Despite the high prevalence of OSA, there is a general lack of awareness of OSA among both the medical community and the general public. It is estimated that less than 20% of those with OSA have been diagnosed or treated. Many healthcare professionals are often unable to diagnose OSA because they are unaware that such non-specific symptoms as excessive daytime sleepiness, snoring, hypertension and irritability are characteristic of OSA.

 

While OSA has been diagnosed in a broad cross-section of the population, it is predominant among middle-aged men and those who are obese, smoke, consume alcohol in excess or use muscle-relaxing and pain-killing drugs. A strong association has been discovered between OSA and a number of cardiovascular diseases. Studies have shown that SDB is present in approximately 83% of patients with drug-resistant hypertension, approximately 72% of patients with type 2 diabetes, approximately 77% of patients with obesity and approximately 76% of patients with congestive heart failure.

 

Sleep-Disordered Breathing and Obstructive Sleep Apnea

 

Sleep-disordered breathing encompasses all disease processes that cause abnormal breathing patterns during sleep. Manifestations include OSA, central sleep apnea, or CSA, and hypoventilation syndromes that occur during sleep. Hypoventilation syndromes are generally associated with obesity, chronic obstructive lung disease and neuromuscular disease. OSA is the most common form of SDB.

 

Sleep fragmentation and the loss of the deeper levels of sleep caused by OSA can lead to excessive daytime sleepiness, reduced cognitive function, including memory loss and lack of concentration, depression and irritability. OSA sufferers also experience an increase in heart rate and an elevation of blood pressure during the cycle of apneas. Several studies indicate that the oxygen desaturation, increased heart rate and elevated blood pressure caused by OSA may be associated with increased risk of cardiovascular morbidity and mortality due to angina, stroke and heart attack. Patients with OSA have been shown to have impaired daytime performance in a variety of cognitive functions including problem solving, response speed and visual motor coordination, and studies have linked OSA to increased occurrences of traffic and workplace accidents.

 

Generally, an individual seeking treatment for the symptoms of OSA is referred by a general practitioner to a sleep specialist for further evaluation. The diagnosis of OSA typically requires monitoring the patient during sleep at either a sleep clinic or the patientÂ’s home. During overnight testing, respiratory parameters and sleep patterns may be monitored, along with other vital signs such as heart rate and blood oxygen levels. Simpler tests, using devices such as our Apnealink, or our automatic positive airway pressure devices, monitor airflow during sleep, and use computer programs to analyze airflow patterns. These tests allow sleep clinicians to detect any sleep disturbances such as apneas, hypopneas or subconscious awakenings.

 

There are many studies being conducted that provide new evidence that treating SDB and OSA can improve health, quality of life and also mitigate the dangers of sleep apnea in occupational health and safety, especially in the transport industry. Evidence continues to mount supporting the role of SDB therapy for disease prevention, improvement of quality of life and healthcare cost reduction.

 

- 3 -


Existing Therapies

 

Before 1981, the primary treatment for OSA was a tracheotomy, a surgical procedure to create a hole in the patientÂ’s windpipe. Alternative surgical treatments have involved either uvulopalatopharyngoplasty, or UPPP, in which surgery is performed on the upper airway to remove excess tissue and to streamline the shape of the airway or implanting a device to add support to the soft palate. UPPP alone has a poor success rate; however, when performed in conjunction with multi-stage upper airway surgical procedures, a greater success rate has been claimed. These combined procedures, performed by highly specialized surgeons, are expensive and involve prolonged and often painful recovery periods. Surgical treatments are not considered first line therapy for OSA. Other alternative treatments available today include nasal surgery, mandibular advancement surgery, dental appliances, palatal implants, somnoplasty and nasal devices. Alternative treatments reported to be under development include pharmaceutical therapies and electrical stimulation of the nerves or muscles.

 

A variety of devices are marketed for the treatment of OSA. Most are only partially effective, but CPAP is a reliable treatment for all severities of OSA and is considered first-line therapy. Use of mandibular advancement devices is increasing as a second-line option in patients unable to use CPAP or those with mild OSA. These devices cause the mandible and tongue to be pulled forward and improve the dimensions of the upper airway. CPAP is a non-invasive means of treating OSA. CPAP was first used as a treatment for OSA in 1980 by Dr. Colin Sullivan, the past Chairman of our Medical Advisory Board and was commercialized for treatment of OSA in the United States in the mid 1980’s. During CPAP treatment, a patient sleeps with a nasal interface connected to a small portable airflow generator that delivers room air at a positive pressure. The patient breathes in air from the flow generator and breathes out through an exhaust port in the interface. Continuous air pressure applied in this manner acts as a pneumatic splint to keep the upper airway open and unobstructed. Interfaces include nasal masks and nasal pillows. Sometimes, when a patient leaks air through their mouth, a full-face mask may need to be used, rather than a nasal interface.

 

CPAP is not a cure and therefore, must be used on a nightly basis as long as treatment is required. Patient compliance has been a major factor in the efficacy of CPAP treatment. Early generations of CPAP units provided limited patient comfort and convenience. Patients experienced soreness from the repeated use of nasal masks and had difficulty falling asleep with the CPAP device operating at the prescribed pressure. In more recent years, product innovations to improve patient comfort and compliance have been developed. These include more comfortable patient interface systems; delay timers that gradually raise air pressure allowing the patient to fall asleep more easily; bilevel air flow generators, including Variable Positive Airway Pressure, or VPAP systems, which provide different air pressures for inhalation and exhalation; heated humidification systems to make the airflow more comfortable; and autotitration devices that reduce the average pressure delivered during the night.

 

Business Strategy

 

We believe that the SDB market will continue to grow in the future due to a number of factors including increasing awareness of OSA, improved understanding of the role of SDB treatment in the management of cardiac, neurologic, metabolic and related disorders, and an increase in home-based diagnosis. Our strategy for expanding our business operations and capitalizing on the growth of the SDB market consists of the following key elements:

 

Continue Product Development and Innovation.    We are committed to ongoing innovation in developing products for the diagnosis and treatment of SDB. We have been a leading innovator of products designed to treat SDB more effectively, increase patient comfort and encourage compliance with prescribed therapy. For example, in 2011, we introduced the S9 bilevel range of flow generators, the Quattro FX full face mask, the Swift FX for Her nasal pillow mask, the Mirage FX nasal mask,

 

- 4 -


the Mirage FX for Her nasal mask and the Stellar ventilation device. In 2012, we introduced Swift FX Bella mask, Pixi pediatric mask, Quattro FX for Her and the EasyCare compliance management solution. In 2013, we introduced new products across both our mask and flow generator categories, including the VPAP COPD, Quattro Air, Swift FX Bella, Swift FX Nano and ResMed’s SleepSeeker. In 2014, we introduced the AirFit™ P10 nasal pillows system, AirFit™ N10 nasal mask, AirFit™ F10 full-face mask and the Astral™ platform, our new generation of life support ventilators. We believe that continued product development and innovation are key factors to our ongoing success. Approximately 13% of our employees are devoted to research and development activities. In fiscal year 2014, we invested $118.2 million, or approximately 8% of our net revenues, in research and development.

 

Expand Geographic Presence.    We market our products in more than 100 countries to sleep clinics, home healthcare dealers and third-party payors. We intend to increase our sales and marketing efforts in our principal markets, as well as expand the depth of our presence in other geographic regions.

 

Increase Public and Clinical Awareness.    We intend to continue to expand our existing promotional activities to increase awareness of SDB and our treatment alternatives. These promotional activities target both the population with predisposition to SDB and medical specialists, such as cardiologists, neurologists and pulmonologists. In addition, we also target special interest groups, including the National Stroke Association, the American Heart Association and the National Sleep Foundation. In concert with other industry participants, we sponsor educational programs targeted at the primary care physician community, which should further enlighten both doctors and patients about the relationship between SDB or OSA and co-morbidities such as cardiac disease, diabetes, hypertension and obesity. The programs should also support our efforts to inform the community of the dangers of sleep apnea with regard to occupational health and safety, especially in the transport industry.

 

Expand into New Clinical Applications.    We continually seek to identify new applications of our technology for significant unmet medical needs. Studies have established a clinical association between OSA and both stroke and congestive heart failure, and have recognized SDB as a cause of hypertension or high blood pressure. Research also indicates that SDB is independently associated with glucose intolerance and insulin resistance. We have developed a device for the treatment of Cheyne-Stokes breathing in patients with congestive heart failure. In addition, we maintain close working relationships with a number of prominent physicians to explore new medical applications for our products and technology. In 2007, we received Food and Drug Administration, or FDA, clearance and launched a new product in the United States for the treatment of respiratory insufficiency due to central sleep apnea, mixed apnea and periodic breathing, called the Adapt SV. The Adapt SV uses a technology known as adaptive servo-ventilation which utilizes an advanced algorithm to calculate a patient-specific minute ventilation target and automatically adjusts pressure support to maintain the target. We believe this technology has allowed physicians to successfully treat complex breathing disorders in some patients who had previously tried and failed traditional positive airway pressure therapy.

 

Leverage the Experience of our Management Team.    Our senior management team has extensive experience in the medical device industry in general, and in the field of SDB in particular. We intend to continue to leverage the experience and expertise of these individuals to maintain our innovative approach to the development of products and increase awareness of the serious medical problems caused by SDB.

 

Products

 

Our portfolio of products includes airflow generators, diagnostic products, mask systems, headgear and other accessories.

 

- 5 -


Air Flow Generators

 

We produce CPAP, VPAP and AutoSet systems for the titration and treatment of SDB. The flow generator systems deliver positive airway pressure through a patient interface, either a small nasal mask, nasal pillows system, or full-face mask. Our VPAP units deliver ultra-quiet, comfortable bilevel therapy. AutoSet systems are based on a proprietary technology to monitor breathing and can also be used in the diagnosis, treatment and management of OSA.

 

The VS and Elisée range of products complement our VPAP Adapt SV and Autoset CS2 for patients who need ventilatory assistance. During fiscal year 2011, we launched the Stellar 100 and 150 ventilation devices, which provide both invasive and non-invasive ventilation applications for adult and pediatric patients. In 2014, we launched the Astral™, our new generation of portable, lightweight, and user-friendly life support ventilators.

 

Flow generators in total accounted for approximately 54% of our net revenues in each of the fiscal years 2014, 2013 and 2012, respectively.

 

The tables below provide a selection of products, as known by our trademarks, which have been released during the last five years.

 

CONTINUOUS

POSITIVE AIRWAY
PRESSURE PRODUCTS

   DESCRIPTION   

DATE OF

COMMERCIAL

INTRODUCTION

   

S9 Elite

   Premium level CPAP device in ResMed’s sleek, compact S9 Series. Features Enhanced Easy-Breathe motor, Expiratory Pressure Relief (EPR) and detailed data options. The device also has an optional integrated humidifier (H5i), ClimateLine heated tube and the small, lightweight SlimLine tube.    February 2010
   

S9 Escape

  

As the Standard CPAP model of the S9 Series, the S9 Escape features Expiratory Pressure Relief (EPR) and other innovative features including Climate Control and the enhanced Easy-Breathe motor. The device also has an optional integrated humidifier (H5i).

 

   September 2010

 

VARIABLE

POSITIVE AIRWAY
PRESSURE PRODUCTS

   DESCRIPTION   

DATE OF

COMMERCIAL

INTRODUCTION

   

VPAP Tx Lab System

  

VPAP Tx therapy device features all ResMedÂ’s sleep therapy modes. Tx Link connection module

relays signals from the device to PSG equipment. The system is controlled through the user-friendly EasyCare Tx titration software.

   March 2010
   

S9 VPAP S

  

Bilevel pressure support therapy device in ResMedÂ’s sleek, compact S9 Series. Designed for

comfort and compliance with the Easy-Breath waveform in S-mode* and pressures up to 25 cmH2O. The device also has an optional integrated humidifier (H5i), ClimateLine heated tube and the small, lightweight SlimLine tube.

   March 2011

 

- 6 -


VARIABLE

POSITIVE AIRWAY
PRESSURE PRODUCTS

   DESCRIPTION   

DATE OF

COMMERCIAL

INTRODUCTION

   

S9 VPAP ST

   Bilevel pressure support therapy device with pressures up to 25 cmH2O designed for comfort, effective therapy with the assurance of back up rate up to 50 bpm. The device also has an optional integrated humidifier (H5i), ClimateLine heated tube and the small, lightweight SlimLine tube.    March 2011
   

S9 VPAP Auto

   Premium auto-adjusting device with the unique VAuto mode and Easy-Breathe technology designed for patients requiring both higher pressures and pressure relief. VAuto mode features enhanced AutoSet technology with central sleep apnea (CSA) detection. The device may be used with an optional integrated humidifier (H5i), ClimateLine heated tube and the small, lightweight SlimLine tube    March 2011
   

S9 VPAP Adapt

   Adaptive Servo-Ventilator specifically designed to provide a rapid response to periodic breathing for the treatment of central and/or mixed apneas, providing ventilatory support when it is needed packaged in ResMed’s sleek, compact S9 Series. The device also offers an optional integrated humidifier (H5i), ClimateLine heated tube and the small, lightweight SlimLine tube.    March 2011
   

S9 AutoSet CS

   Adaptive Servo-Ventilator specifically designed to provide a rapid response to Cheyne-Stokes breathing and periodic breathing associated with Heart Failure for the treatment of central and/or mixed apneas, providing ventilatory support when it is needed. Packaged in ResMed’s sleek, compact S9 Series. The device also has an optional integrated humidifier (H5i), ClimateLine heated tube and the small, lightweight SlimLine tube.    March 2011
   

S9 Auto 25#

   Premium auto-adjusting device with the unique VAuto mode and Easy-Breathe technology designed for patients requiring both higher pressures and pressure relief. VAuto mode features enhanced AutoSet technology with central sleep apnea (CSA) detection. The device may be used with an optional integrated humidifier (H5i), ClimateLine heated tube and the small, lightweight SlimLine tube    March 2011

 

- 7 -


VARIABLE

POSITIVE AIRWAY
PRESSURE PRODUCTS

   DESCRIPTION   

DATE OF

COMMERCIAL

INTRODUCTION

   

S9 VPAP ST-A

   Bilevel pressure support therapy device with pressures up to 30 cmH2O designed for comfort, effective therapy with the assurance of back up rate up to 50 bpm and alarms. The device also has an optional integrated humidifier (H5i), ClimateLine heated tube and the small, lightweight SlimLine tube.    March 2013
   

S9 VPAP COPD

   Bilevel pressure support up to pressure 30cmH2O with both fixed and adjustable alarms. This device has been specifically designed for COPD.    April 2013

 

AUTOMATIC POSITIVE
AIRWAY PRESSURE
PRODUCTS
   DESCRIPTION   

DATE OF

COMMERCIAL

INTRODUCTION

   

S9 AutoSet

   Premium APAP device packaged in ResMed’s sleek, compact S9 Series. Features Enhanced AutoSet (with Central Sleep Apnea Detection), Enhanced Easy-Breathe motor, expiratory pressure relief (EPR) and detailed data options. The device also has, an optional integrated humidifier (H5i), ClimateLine heated tube and the small, lightweight SlimLine tube.    February 2010
   

S9 Escape Auto

   The S9 Escape Auto is the Standard APAP device packaged in ResMed’s sleek, compact S9 Series. It features an intelligent algorithm with Easy-Breathe expiratory pressure relief (EPR) and delivers whisper-quiet therapy in a smooth waveform. The device also offers an optional integrated humidifier (H5i), Climate Control with the ClimateLine heated tube and the small, lightweight SlimLine tube.    September 2010

 

VENTILATION  PRODUCTS    DESCRIPTION   

DATE OF

COMMERCIAL

INTRODUCTION

   

Stellar 100 and 150

   Pressure support ventilator for invasive and non-invasive purposes so it can be used from the hospital to the home.    March 2011
   

Astral

   Pressure support and volume ventilator for invasive and non-invasive purposes so it can be used from the hospital to the home    May 2014

 

- 8 -


Masks, Accessories, Motors and Diagnostic Products

 

Masks, accessories, motors and diagnostic products together accounted for approximately 46% of our net revenues in each of the fiscal years 2014, 2013 and 2012, respectively.

 

Mask Systems and Diagnostic Products

 

Mask systems are one of the most important elements of SDB treatment systems. Masks are a primary determinant of patient comfort and as such may drive or impede patient compliance with therapy. We have been a consistent innovator in masks, improving patient comfort while minimizing size and weight.

 

MASK PRODUCTS    DESCRIPTION   

DATE OF

COMMERCIAL

INTRODUCTION

   
Swift FX    Fourth generation nasal pillows system offering a fully flexible design for comfort and performance    September 2009
   
Mirage SoftGel    Nasal mask offering a gel cushion, interchangeable with the Activa LT system to improve choice and comfort    October 2009
   
Quattro FX    Full Face mask offering unobtrusive fit    September 2010
   
Swift FX for Her    Fourth generation nasal pillows system offering a fully flexible design for comfort and performance with female specific design features    September 2010
   
Mirage FX    Nasal mask offering auto adjusting forehead support and SoftEdge headgear    October 2010
   
Mirage FX for Her    Nasal mask offering auto adjusting forehead support and SoftEdge headgear with female specific design features    April 2011
   
Pixi Pediatric Mask    A pediatric mask designed for children 2 years and older    September 2011
   
Quattro FX for Her    Full face mask offering unobtrusive fit with female specific design features    October 2011
   
Swift FX Bella    Fourth generation nasal pillows system with an alternative headgear design    January 2012
   
Quattro Air    Next Generation lightweight Full Face Mask with improved comfort    June 2013
   
Swift FX Nano    A compact nasal mask designed to deliver an excellent user experience, without compromising on fit, comfort and ease of use.    June 2013
   
AirFit P10    A compact, lightweight nasal pillows system that has only three parts, including a new soft and stable QuickFit™ headgear.    January 2014

 

- 9 -


MASK PRODUCTS    DESCRIPTION   

DATE OF

COMMERCIAL

INTRODUCTION

   
AirFit F10    A compact, lightweight full-face mask that delivers comfort, stability, and performance in a simple and elegant design.    April 2014
   
AirFit N10    A compact nasal mask that stands out with its comfort and visual freedom in a user-friendly design.    April 2014

 

We market sleep recorders for the diagnosis and titration of SDB in sleep clinics and hospitals. These diagnostic systems record relevant respiratory and sleep data, which can be analyzed by a sleep specialist or physician who can then tailor an appropriate OSA treatment regimen for the patient.

 

DIAGNOSTIC PRODUCTS    DESCRIPTION   

DATE OF

COMMERCIAL

INTRODUCTION

   
ApneaLink Plus (U.S.)    A portable diagnostic device with oximetry measurement and respiratory effort measurement    June 2009
   
Apnealink Air    A portable diagnostic device which measures oximetry, respiratory effort, pulse, nasal flow and snoring. Works with EasyCare Online to provide comprehensive diagnostic solution to clinicians.    December 2013

 

- 10 -


Accessories and Other Products

 

To assist those professionals diagnosing or managing the treatment of patients there are data communications and control products such as EasyCare, ResLink, ResControl, ResControl II, TxControl, ResScan and ResTraxx modules that facilitate the transfer of data and other information to and from the flow generators. To enhance patient comfort, convenience and compliance, we market a variety of other products and accessories. These products include humidifiers, such as H5i and H4i, which connect directly with the CPAP, VPAP and AutoSet flow generators to humidify and heat the air delivered to the patient, helping to prevent the drying of nasal passages that can cause discomfort. Other optional accessories include cold passover humidifiers, carry bags and breathing circuits.

 

DATA / PATIENT
MANAGEMENT PRODUCTS
   DESCRIPTION   

DATE OF

COMMERCIAL

INTRODUCTION

   

S9 Embletta Adapter

   The S9 Embletta Adapter provides a connection between an S9 device and an Embletta Portable Diagnostic System    November 2010
   

ResScan v3.14

   An easy and flexible patient monitoring system providing therapy insights. This version included support for S9 bilevel and cross-patient first 30 days compliance reporting.    April 2011
   

ResTraxx v17.1

   ResMed’s web-based compliance monitoring system which introduced several new features to ResTraxx Online reports and enhanced support for S9 VPAP devices.    April 2011
   

ResTraxx v 18.3

   ResMed’s web-based compliance monitoring system introducing EasyCare Card – online compliance reporting direct from device SD card to ResTraxx Online    November 2011
   

ResScan V3.16

   ResMed’s easy and flexible patient monitoring system providing therapy insights and supporting VS and Elise ventilation products (Europe)    November 2011
   

EasyCare

   ResMed’s new compliance management solution offers both wireless and card-to-cloud functionality, providing access to patient data anywhere with an internet connection. Intuitive user interface, easy to understand reports and automated compliance notification.    April 2012
   

U-Sleep

   A flexible compliance solution that monitors CPAP device usage and helps HMEs manage their patients during their initial acclimatization and ongoing therapy.    August 2012

 

Product Development and Clinical Trials

 

We have a strong track record in innovation in the sleep market. In 1989, we introduced our first CPAP device. Since then we have been committed to an ongoing program of product advancement and development. Currently, our product development efforts are focused on not only improving our current product offerings, but also expanding into new product applications.

 

- 11 -


We continually seek to identify new applications of our technology for significant unmet medical needs. SDB is associated with a number of symptoms beyond excessive daytime sleepiness and irritability. Studies have established a clinical association between SDB and hypertension, stroke, congestive heart failure and diabetes. We support clinical trials in many countries including the United States, Germany, France, the United Kingdom, Italy, Switzerland, China and Australia to develop new clinical applications for our technology.

 

We consult with physicians at major sleep centers throughout the world to identify technological trends in the treatment of SDB. New product ideas are also identified by our marketing staff, direct sales force, network of distributors, customers and patients.

 

In fiscal years 2014, 2013 and 2012 we invested $118.2 million, $120.1 million and $109.7 million, respectively, on research and development.

 

Sales and Marketing

 

We currently market our products in more than 100 countries through a network of distributors and our direct sales force. We attempt to tailor our marketing approach to each national market, based on regional awareness of SDB as a health problem, physician referral patterns, consumer preferences and local reimbursement policies. See Note 15 – Segment Information of the Notes to Consolidated Financial Statements (Part II, Item 8) for financial information about our geographic areas.

 

North America and Latin America.    Our products are typically purchased by a home healthcare dealer who then sells the products to the patient. The decision to purchase our products, as opposed to those of our competitors, is made or influenced by one or more of the following individuals or organizations: the prescribing physician and his or her staff; the home healthcare dealer; the insurer and the patient. In North and Latin America, our sales and marketing activities are conducted through a field sales organization made up of regional territory representatives, program development specialists and regional sales directors. Our field sales organization markets and sells products to home healthcare dealer branch locations throughout the North and Latin America.

 

We also market our products directly to sleep clinics. Patients who are diagnosed with OSA and prescribed CPAP treatment are typically referred by the diagnosing sleep clinic to a home healthcare dealer to fill the prescription. The home healthcare dealer, in consultation with the referring physician, will assist the patient in selecting the equipment, fit the patient with the appropriate mask and set the flow generator pressure to the prescribed level.

 

Sales in North and Latin America accounted for 54%, 56% and 55% of our net revenues for fiscal years 2014, 2013 and 2012, respectively.

 

Europe.    We market our products in most major European countries. We have wholly-owned subsidiaries in Austria, Czech Republic, Finland, France, Germany, Ireland, Norway, Netherlands, Poland, Sweden, Switzerland and the United Kingdom. We use independent distributors to sell our products in other areas of Europe. Distributors are selected in each country based on their knowledge of respiratory medicine and a commitment to SDB therapy. In each country in which we sell our products direct, a local senior manager is responsible for direct national sales. In many countries in Europe, we sell our products to home healthcare dealers who then sell the products to the patients. In Germany, we also operate a home healthcare company, in which we provide products and services directly to patients, and receive reimbursement directly from third-party payors.

 

Sales in Europe accounted for 36%, 33% and 35% of our total net revenues for fiscal years 2014, 2013 and 2012, respectively.

 

- 12 -


Asia Pacific.    We have wholly-owned subsidiaries in Australia, China, Hong Kong, India, Japan, Korea, New Zealand, and Taiwan. We use a combination of our direct sales force and independent distributors to sell our products in Asia Pacific. Sales in Asia Pacific accounted for 10%, 11% and 10% of our total net revenues for the fiscal years 2014, 2013 and 2012, respectively.

 

Market Growth Opportunities

 

We view the future as having three horizons of growth within the sleep and respiratory disorders sector of the medical device industry. The first horizon includes our existing market in OSA treatment, where telemedicine is becoming an important factor. The use of technologies that allow remote collection and transfer of information may change the current clinical pathways for following up patients on our devices and provides an opportunity to improve our services. We are investing in expanding our capabilities in this area.

 

The second horizon includes the use of our devices for the treatment of respiratory failure both in the hospital and the home. An area of growth is expected to be in the treatment of chronic obstructive pulmonary disease, or COPD, which is an increasingly common chronic disease. Some patients with advanced COPD may benefit from the use of ventilation at night, but until recently only a small number of COPD patients were treated using ventilation on a long term basis. A study published in 2014 has demonstrated a reduction in mortality and an improvement in quality of life and exercise capacity in COPD patients with stable but severe disease using non-invasive ventilation or NIV, nightly for 6 months. The findings from this study and our associated marketing activities may result in an increase in the size of the homecare market for NIV. Additionally, the use of NIV is becoming routine in most acute care hospitals, as guidelines stipulate its use in acute exacerbations and familiarity with the techniques involved increases.

 

The focus of the third horizon is the cardiology market. There is a growing body of evidence concerning the links between cardiology diseases and SDB. It is established that OSA is a secondary cause of hypertension and is common in hypertensive populations, particularly those resistant to therapy. OSA is related to atrial fibrillation with a high prevalence in patients and there is a strong association between OSA and stroke with a high prevalence in the period after a stroke. OSA is also known to be a strong risk factor for the development of acute coronary disease and cardiovascular disease in general. Our main focus in cardiology is on heart failure as it is the most costly of the cardiac diseases in Western societies. We have developed a device which effectively treats central sleep apnea, a form of breathing seen in approximately a third of chronic heart failure patients, and which is associated with a poor prognosis and risk of re-admission to the hospital. We are performing two clinical trials to show the efficacy of this device in treating heart failure. In addition to clinical trials we pursue suitable opportunities with professional and healthcare associations to raise awareness of the importance of SDB in cardiology patients. The findings from the two clinical trials and our associated marketing activities may result in an increase in demand for our devices.

 

We are also continuing our work to raise awareness of SDB in diabetes. OSA is common in diabetic patient populations and those with metabolic syndrome. OSA has a number of deleterious effects in these diseases and importantly raises the risk of cardiovascular disease, if left untreated. This association is being recognized by diabetologists and patients, and in June 2008, the International Diabetes Federation, or IDF, released a statement on SDB and type 2 diabetes. The IDF Taskforce on Epidemiology and Prevention strongly recommended that health professionals working in both type 2 diabetes and SDB adopt clinical practices to ensure that a patient presenting with one condition is considered for the other. Furthermore, the IDF recommended that people with type 2 diabetes should be screened for OSA particularly when they present classical symptoms such as witnessed apneas, heavy snoring or daytime sleepiness and poor workplace performance. In March 2011, the American Association of Clinical Endocrinologists published updated medical guidelines for developing a

 

- 13 -


comprehensive care plan for patients with diabetes, recommending screening for OSA/SDB in adults with type 2 diabetes, especially men older than 50 years. We are also actively engaged with groups such as diabetes nurse educators to further raise awareness.

 

We are also working with occupational health professionals to raise awareness of the issues caused by untreated OSA in the workplace including accidents, absenteeism and reduced productivity, plus increased costs for employers who provide healthcare coverage for employees.

 

We continue to provide research funding in these strategic areas while at the same time providing educational support to physicians working within these various specialties. We believe that the increasing awareness among physicians supports the efforts and investment we are making in new markets.

 

Manufacturing

 

Our manufacturing operations consist primarily of assembly and testing of our flow generators, masks and accessories. Of the numerous raw materials, parts and components purchased for assembly of our therapeutic and diagnostic sleep disorder products, most are off-the-shelf items available from multiple vendors. We also purchase uniquely configured components from various suppliers, including some who are single-source suppliers for us. Any reduction or halt in supply from one of these single-source suppliers could limit our ability to manufacture our products or devices until a replacement supplier is found and qualified. We generally manufacture to our internal sales forecasts and fill orders as received. Over the last few years, the manufacturing processes have been transformed along lean manufacturing guidelines to flow lines staffed by dedicated teams. Each team is responsible for the manufacture and quality of their product group and decisions are based on performance and quality measures, including customer feedback.

 

Our principal manufacturing facility is located in Sydney, Australia and comprises a 155,000 square foot manufacturing facility. We have a 174,000 square foot assembly and distribution facility in South Carolina; the plant specializes in regional customization of our flow generators. We have a 95,000 square foot manufacturing facility in Singapore to complement the Sydney manufacturing site. The plant assembles masks, flow generators and electric motors. We have a 46,000 square foot manufacturing facility in Malaysia. The plant specializes in the manufacture of headgear material for our masks and accessories. We have a 43,000 square foot manufacturing facility in Paris, France. The facility is primarily responsible for the assembly of mechanical ventilators and associated accessories. We have a 43,000 square foot manufacturing facility in Freudenstadt, Germany; the plant specializes in the manufacture of medical humidification products. We also manufacture high-quality electric motors for our flow generator devices at a 72,000 square foot manufacturing facility in Chatsworth, California.

 

Our quality management system is based upon the requirements of ISO 9001, ISO 13485, FDA Quality System Regulations for Medical Devices, the Medical Device Directive (93/42/EEC) and other applicable regulations for the markets in which we sell. All of our manufacturing sites are accredited to ISO 13485. These sites are subject to third-party audits, conducted by the ISO notified bodies, at regular intervals.

 

Third-Party Coverage and Reimbursement

 

The cost of medical care in many of the countries in which we operate is funded in substantial part by government and private insurance programs. In Germany, we receive payments directly from these payors. Outside Germany, although we do not generally receive payments for our products directly from these payors, our success in major markets is dependent upon the ability of patients to obtain coverage and adequate reimbursement from third-party payors for our products.

 

- 14 -


In the United States, our products are purchased primarily by home healthcare dealers, hospitals or sleep clinics, which then invoice third-party payors directly for reimbursement. Domestic third-party payors include government payors such as Medicare and Medicaid and commercial health insurance plans. These payors may deny coverage and reimbursement if they determine that a device is not used in accordance with certain covered treatment methods, or is experimental, unnecessary or inappropriate. The long-term trend towards cost-containment, through managed healthcare, or other legislative proposals to reform healthcare, could control or significantly influence the purchase of healthcare services and products and could result in lower prices for our products. In some foreign markets, such as France, Germany and Japan, government reimbursement is currently available for purchase or rental of our products, subject to constraints such as price controls or unit sales limitations. In Australia and in some other foreign markets, there is currently limited or no reimbursement for devices that treat OSA.

 

The past decade of legislative reform in the United States, including, by way of example, the 2010 Patient Protection and Affordable Care Act, as amended by the Health Care and Education Reconciliation Act (collectively, the PPACA), Medicare Improvement for Patients and Providers Act of 2008 (MIPPA), Deficit Reduction Act of 2005 (DRA), and the Medicare Prescription Drug, Improvement, and Modernization Act of 2003 (MMA), has significantly impacted reimbursement for products that we provide. The longer term impact, though not entirely predictable, continues to bring significant changes to the third-party payor landscape.

 

Beginning in 2005, the MMA reduced payment amounts for five categories of HME, froze payment amounts for certain covered home medical equipment (HME) items through 2007, established a Medicare competitive acquisition program for HME and imposed quality standards and accreditation requirements for HME suppliers. The DRA capped the Medicare rental period for certain capped rental items, including CPAP devices, at 13 months of continuous use, after which time title of the equipment would transfer automatically to the beneficiary. MIPPA retroactively delayed the implementation of competitive bidding for eighteen months and decreased the 2009 Medicare fee schedule payment amounts for HME by 9.5% for product categories included in competitive bidding. In addition, on an annual basis, legislatively-defined update factors are applied by the Centers for Medicare & Medicaid Services (CMS) to the Medicare fee schedule payment amounts. For 2013, the fee schedule amounts were increased by 0.8% and for 2014, by 1.0%.

 

Effective January 1, 2011, CMS implemented the first round of competitive bidding in 9 competitive bidding areas, or CBAs, and included home medical equipment that we manufacture and develop, specifically, CPAP and respiratory assist devices, and related supplies and accessories. The average reduction from current Medicare payment rates in the first round of competitive bidding implemented was approximately 32% overall and 34% for CPAP and respiratory devices. On January 30, 2013, CMS announced the single payment amounts for the second round, which covered a total of 91 CBAs. For CPAP and respiratory devices, the average reduction from current Medicare payment rates in the second round was approximately 47% on a weighted average basis, effective July 1, 2013. CMS is required by law to recompete these contracts at least once every three years. Accordingly, on July 15, 2014, CMS announced plans to conduct a Round 2 Recompete, where suppliers awarded contracts in the second round of competitive bidding will recompete. CMS expects to announce the bidding schedule in Fall 2014.

 

The PPACA, which was passed both to expand the number of individuals with healthcare coverage and to develop additional revenue sources, includes, among other things, a deductible excise tax equal to 2.3% of the price for which medical devices are sold in the United States on any entity that manufactures or imports medical devices, with limited exceptions, beginning in 2013. This excise tax is applicable to our products that are primarily used in hospitals and sleep labs, which includes the ApneaLink, VPAP Tx, certain Respiratory Care and dental sleep products. The PPACA also provides

 

- 15 -


for a number of Medicare regulatory requirements, including new face-to-face encounter requirements for durable medical equipment and home health services; and a requirement that by 2016, the competitive bidding process must be rolled-out nationally or prices in non-competitive bidding areas must be adjusted to match competitive bidding prices.

 

We cannot predict at this time the full impact of the PPACA, or any U.S. legislation enacted in the future will have on our revenues, profit margins, profitability, operating cash flows and results of operations.

 

Service and Warranty

 

We generally offer either one-year or two-year limited warranties on our flow generator products. Warranties on mask systems are for 90 days. Our distributors either repair our products with parts supplied by us or arrange shipment of products to our facilities for repair or replacement.

 

We receive returns of our products from the field for various reasons. We believe that the level of returns experienced to date is consistent with levels typically experienced by manufacturers of similar devices. We provide for warranties and returns based on historical data.

 

Competition

 

The markets for our products are highly competitive. We believe that the principal competitive factors in all of our markets are product features, reliability and price. Customer support, reputation and efficient distribution are also important factors.

 

We compete on a market-by-market basis with various companies, some of which have greater financial, research, manufacturing and marketing resources than us. Our primary competitors include Philips BV; DeVilbiss Healthcare; Fisher & Paykel Healthcare Corporation Limited; Apex Medical Corporation; BMC Medical Co. Ltd.; and regional manufacturers. The disparity between our resources and those of our competitors may increase as a result of the trend towards consolidation in the healthcare industry. In addition, some of our competitors, such as Weinmann Geräte für Medizin GmbH + Co. KG, are affiliates of customers of ours, which may make it difficult to compete with them. Finally, our products compete with surgical procedures and dental appliances designed to treat OSA and other SDB-related respiratory conditions. The development of new or innovative procedures or devices by others could result in our products becoming obsolete or noncompetitive, which would harm our revenues and financial condition.

 

Any product developed by us that gains regulatory clearance will have to compete for market acceptance and market share. An important factor in such competition may be the timing of market introduction of competitive products. Accordingly, the speed with which we can develop products, complete clinical testing and regulatory clearance processes and supply commercial quantities of the product to the market are important competitive factors. In addition, our ability to compete will continue to be dependent on successfully protecting our patents and other intellectual property.

 

Patents and Proprietary Rights and Related Litigation

 

We rely on a combination of patents, trade secrets, copyrights, trademarks and non-disclosure agreements to protect our proprietary technology and rights.

 

Through our various subsidiaries, as of the date of this annual report, we own or have licensed rights to approximately 859 issued United States patents (including approximately 369 design patents) and approximately 1,535 issued foreign patents. In addition, there are approximately 462 pending United

 

- 16 -


States patent applications (including approximately 63 design patent applications), approximately 909 pending foreign patent applications, approximately 1,162 registered foreign designs and 74 pending foreign designs. Some of these patents, patent applications and designs relate to significant aspects and features of our products.

 

Of our patents, 156 United States patents and 229 foreign patents are due to expire in the next five years. There are 36 foreign patents due to expire in 2015, 12 in 2016, 28 in 2017, 98 in 2018. and 55 in 2019. There are 22 United States patents due to expire in 2015, 7 United States patents in 2016, 29 United States patents in 2017, 63 United States patents in 2018, and 35 United States patents in 2019. We believe that the expiration of these patents will not have a material adverse impact on our competitive position.

 

Litigation may be necessary to enforce patents issued to us, to protect our rights, or to defend third-party claims of infringement by us of the proprietary rights of others. The defense and prosecution of patent claims, including pending claims, as well as participation in other inter-party proceedings, can be expensive and time-consuming, even in those instances in which the outcome is favorable to us. Patent laws regarding the enforceability of patents vary from country to country. Therefore, there can be no assurance that patent issues will be uniformly resolved, or that local laws will provide us with consistent rights and benefits.

 

Government Regulations

 

FDA

 

Our products are subject to extensive regulation particularly as to safety, efficacy and adherence to FDA Quality System Regulation, and related manufacturing standards. Medical device products are subject to rigorous FDA and other governmental agency regulations in the United States and similar regulations of foreign agencies abroad. The FDA regulates the design, development, research, preclinical and clinical testing, introduction, manufacture, advertising, labeling, packaging, marketing, distribution, import and export, and record keeping for such products, in order to ensure that medical products distributed in the United States are safe and effective for their intended use. In addition, the FDA is authorized to establish special controls to provide reasonable assurance of the safety and effectiveness of most devices. Non-compliance with applicable requirements can result in import detentions, fines, civil and administrative penalties, injunctions, suspensions or losses of regulatory approvals, recall or seizure of products, operating restrictions, refusal of the government to approve product export applications or allow us to enter into supply contracts, and criminal prosecution.

 

Unless an exemption applies, the FDA requires that a manufacturer introducing a new medical device or a new indication for use of an existing medical device obtain either a Section 510(k) premarket notification clearance or a premarket approval, or PMA, before introducing it into the U.S. market. The type of marketing authorization is generally linked to the classification of the device. The FDA classifies medical devices into one of three classes (Class I, II or III) based on the degree of risk the FDA determines to be associated with a device and the level of regulatory control deemed necessary to ensure the device’s safety and effectiveness.

 

Our products currently marketed in the United States are marketed in reliance on 510(k) pre-marketing clearances as either Class I or Class II devices. The process of obtaining a Section 510(k) clearance generally requires the submission of performance data and often clinical data, which in some cases can be extensive, to demonstrate that the device is “substantially equivalent” to a device that was on the market before 1976 or to a device that has been found by the FDA to be “substantially equivalent” to such a pre-1976 device, a predecessor device is referred to as “predicate device.” As a result, FDA clearance requirements may extend the development process for a considerable length of time. In addition, in some cases, the FDA may require additional review by an advisory panel, which

 

- 17 -


can further lengthen the process. The PMA process, which is reserved for new devices that are not substantially equivalent to any predicate device and for high-risk devices or those that are used to support or sustain human life, may take several years and requires the submission of extensive performance and clinical information.

 

Medical devices can be marketed only for the indications for which they are cleared or approved. After a device has received 510(k) clearance for a specific intended use, any change or modification that significantly affects its safety or effectiveness, such as a significant change in the design, materials, method of manufacture or intended use, may require a new 510(k) clearance or PMA approval and payment of an FDA user fee. The determination as to whether or not a modification could significantly affect the deviceÂ’s safety or effectiveness is initially left to the manufacturer using available FDA guidance; however, the FDA may review this determination to evaluate the regulatory status of the modified product at any time and may require the manufacturer to cease marketing and recall the modified device until 510(k) clearance or PMA approval is obtained. The manufacturer may also be subject to significant regulatory fines or penalties. The FDA is currently reviewing its guidance describing when it believes a manufacturer is obligated to submit a new 510(k) for modifications or changes to a previously cleared device. The FDA is expected to issue revised guidance to assist device manufacturers in making this determination. It is unclear whether the FDAÂ’s approach in this new guidance will result in substantive changes to existing policy and practice regarding the assessment of whether a new 510(k) is required for changes or modifications to existing devices.

 

Any devices we manufacture and distribute pursuant to clearance or approval by the FDA are subject to pervasive and continuing regulation by the FDA and certain state agencies. These include product listing and establishment registration requirements, which help facilitate FDA inspections and other regulatory actions. As a medical device manufacturer, all of our manufacturing facilities are subject to inspection on a routine basis by the FDA. We are required to adhere to applicable regulations setting forth detailed cGMP requirements, as set forth in the QSR, which require, manufacturers, including third-party manufacturers, to follow stringent design, testing, control, documentation and other quality assurance procedures during all phases of the design and manufacturing process. Noncompliance with these standards can result in, among other things, fines, injunctions, civil penalties, recalls or seizures of products, total or partial suspension of production, refusal of the government to grant 510(k) clearance or PMA approval of devices, withdrawal of marketing approvals and criminal prosecutions. We believe that our design, manufacturing and quality control procedures are in compliance with the FDAÂ’s regulatory requirements.

 

We must also comply with post-market surveillance regulations, including medical device reporting, or MDR, requirements which require that we review and report to the FDA any incident in which our products may have caused or contributed to a death or serious injury. We must also report any incident in which our product has malfunctioned if that malfunction would likely cause or contribute to a death or serious injury if it were to recur.

 

Labeling and promotional activities are subject to scrutiny by the FDA and, in certain circumstances, by the Federal Trade Commission. Medical devices approved or cleared by the FDA may not be promoted for unapproved or uncleared uses, otherwise known as “off-label” promotion. The FDA and other agencies actively enforce the laws and regulations prohibiting the promotion of off-label uses, and a company that is found to have improperly promoted off-label uses may be subject to significant liability, including substantial monetary penalties and criminal prosecution.

 

Sales of medical devices outside the United States are subject to regulatory requirements that vary widely from country to country. Approval for sale of our medical devices in Europe is through the CE mark process. Where appropriate, our products are CE marked to the European UnionÂ’s Medical

 

- 18 -


Device Directive. Under the CE marketing scheme, our products are classified as either Class I or Class II. Our devices are listed in Australia with the Therapeutic Goods Administration, and in Canada with Health Canada.

 

Other Healthcare Laws

 

Even though we do not submit claims or bill governmental programs and other third-party payers directly for reimbursement for our products sold in the United States, we are still subject to a number of laws and regulations that may restrict our business practices, including, without limitation, anti-kickback, false claims, physician payment transparency and data privacy and security laws. The government has interpreted these laws broadly to apply to the marketing and sales activities of manufacturers and distributors like us.

 

The federal Anti-Kickback Statute prohibits, among other things, persons or entities from knowingly and willfully soliciting, receiving, offering or providing remuneration, directly or indirectly, in cash or in kind, in exchange for or to induce either the referral of an individual for, or the purchase, lease, order or recommendation of, any good, facility, item or service for which payment may be made, in whole or in part, under federal healthcare programs such as Medicare and Medicaid. In addition, a claim including items or services resulting from a violation of the federal Anti-Kickback Statute constitutes a false or fraudulent claim for purposes of the federal civil False Claims Act.

 

The federal civil False Claims Act prohibits, among other things, any person or entity from knowingly presenting, or causing to be presented, a false or fraudulent claim for payment or approval to the federal government or knowingly making, using or causing to be made or used a false record or statement material to a false or fraudulent claim to the federal government. A claim includes “any request or demand” for money or property presented to the U.S. government. The civil False Claims Act also applies to false submissions that cause the government to be paid less than the amount to which it is entitled, such as a rebate. Intent to deceive is not required to establish liability under the civil False Claims Act.

 

The federal Health Insurance Portability and Accountability Act of 1996, or HIPAA, created federal criminal statutes that prohibit among other actions, knowingly and willfully executing, or attempting to execute, a scheme to defraud any healthcare benefit program, including private third-party payors, knowingly and willfully embezzling or stealing from a healthcare benefit program, willfully obstructing a criminal investigation of a healthcare offense, and knowingly and willfully falsifying, concealing or covering up a material fact or making any materially false, fictitious or fraudulent statement in connection with the delivery of or payment for healthcare benefits, items or services. Like the Anti-Kickback Statute, a person or entity does not need to have actual knowledge of these statutes or specific intent to violate them in order to have committed a violation.

 

Also, many states have similar fraud and abuse statutes or regulations that may be broader in scope and may apply regardless of payor, in addition to items and services reimbursed under Medicaid and other state programs.

 

Under HIPAA, the Department of Health and Human Services, or HHS, has issued regulations to protect the privacy and security of protected health information used or disclosed by covered entities including health care providers, such as us. HIPAA also regulates standardization of data content, codes and formats used in health care transactions and standardization of identifiers for health plans and providers. Penalties for violations of HIPAA regulations include civil and criminal penalties. In addition to federal privacy and security regulations, there are a number of state laws governing confidentiality and security of health information that are applicable to our business. New laws governing privacy may be adopted in the future as well. Failure to comply with privacy requirements could result in civil or criminal penalties, which could have a materially adverse effect on our business.

 

- 19 -


Additionally, there has been a recent trend of increased federal and state regulation of payments and transfers of value provided to healthcare professionals or entities. The Physician Payment Sunshine Act was enacted in law as part of PPACA, which imposed new annual reporting requirements on device manufacturers for payments and other transfers of value provided by them, directly or indirectly, to physicians and teaching hospitals, as well as ownership and investment interests held by physicians and their family members. A manufacturerÂ’s failure to submit timely, accurately and completely the required information for all payments, transfers of value or ownership or investment interests may result in civil monetary penalties. Certain states also mandate implementation of commercial compliance programs, impose restrictions on device manufacturer marketing practices and/or require the tracking and reporting of gifts, compensation and other remuneration to healthcare professionals and entities.

 

The shifting commercial compliance environment and the need to build and maintain robust systems to comply with different compliance or reporting requirements in multiple jurisdictions increase the possibility that a healthcare company may fail to comply fully with one or more of these requirements. If our operations are found to be in violation of any of the health regulatory laws described above or any other laws that apply to us, we may be subject to penalties, including potentially significant criminal and civil and administrative penalties, damages, fines, disgorgement, imprisonment, exclusion from participation in government healthcare programs, contractual damages, reputational harm, administrative burdens, diminished profits and future earnings, and the curtailment or restructuring of our operations, any of which could adversely affect our ability to operate our business and our results of operations.

 

Employees

 

As of June 30, 2014, we had approximately 4,100 employees or full-time consultants, of which approximately 1,620 persons were employed in warehousing and manufacturing, 550 in research and development and 1,930 in sales, marketing and administration. Of our employees and consultants, approximately, 1,260 were located in Australia, 820 in North and Latin America, 1,320 in Europe and 700 in Asia.

 

We believe that the success of our business will depend, in part, on our ability to attract and retain qualified personnel.

 

ITEM 1A RISK FACTORS

 

Before deciding to purchase, hold or sell our common stock, you should carefully consider the risks described below in addition to the other cautionary statements and risks described elsewhere, and the other information contained, in this Report and in our other filings with the SEC, including our subsequent reports on Forms 10-Q and 8-K. The risks and uncertainties described below are not the only ones we face. Additional risks and uncertainties not presently known to us or that we currently deem immaterial may also affect our business. If any of these known or unknown risks or uncertainties actually occurs with material adverse effects on us, our business, financial condition and results of operations could be seriously harmed. In that event, the market price for our common stock will likely decline, and you may lose all or part of your investment.

 

Our inability to compete successfully in our markets may harm our business.    The markets for our SDB products are highly competitive and are characterized by frequent product improvements and evolving technology. Our ability to compete successfully depends, in part, on our ability to develop, manufacture and market innovative new products. The development of innovative new products by our competitors or the discovery of alternative treatments or potential cures for the conditions that our

 

- 20 -


products treat could make our products noncompetitive or obsolete. Current competitors, new entrants, academics, and others are trying to develop new devices, alternative treatments or cures, and pharmaceutical solutions to the conditions our products treat.

 

Additionally, some of our competitors have greater financial, research and development, manufacturing and marketing resources than we do. The past several years have seen a trend towards consolidation in the healthcare industry and in the markets for our products. Industry consolidation could result in greater competition if our competitors combine their resources, if our competitors are acquired by other companies with greater resources than ours, or if our competitors become affiliated with customers of ours. This competition could increase pressure on us to reduce the selling prices of our products or could cause us to increase our spending on research and development and sales and marketing. If we are unable to develop innovative new products, maintain competitive pricing, and offer products that consumers perceive to be as good as those of our competitors, our sales or gross margins could decrease which would harm our business.

 

Our business depends on our ability to market effectively to dealers of home healthcare products and sleep clinics.    We market our products primarily to home healthcare dealers and to sleep clinics that diagnose OSA and other sleep disorders, as well as to non-sleep specialist physician practices that diagnose and treat sleep disorders. We believe that these groups play a significant role in determining which brand of product a patient will use. The success of our business depends on our ability to market effectively to these groups to ensure that our products are properly marketed and sold by these third-parties.

 

We have limited resources to market to the sleep clinics, home healthcare dealer branch locations and to the non-sleep specialists, most of whom use, sell or recommend several brands of products. In addition, home healthcare dealers have experienced price pressures as government and third-party reimbursement has declined for home healthcare products, and home healthcare dealers are requiring price discounts and longer periods of time to pay for products purchased from us. We cannot assure you that physicians will continue to prescribe our products, or that home healthcare dealers or patients will not substitute competing products when a prescription specifying our products has been written.

 

We have expanded our marketing activities to target the population with a predisposition to sleep-disordered breathing as well as primary care physicians and various medical specialists. We cannot assure you that these marketing efforts will be successful in increasing awareness or sales of our products.

 

Consolidation in the health care industry could have an adverse effect on our revenues and results of operations.    Many home health care dealers are consolidating which may result in greater concentration of market power. As the health care industry consolidates, competition to provide goods and services to industry participants may become more intense. These industry participants may try to use their market power to negotiate price concessions or reductions for medical devices and components produced by us. If we are forced to reduce our prices because of consolidation in the health care industry, our revenues may decrease and our consolidated earnings, financial condition, and/or cash flows may suffer.

 

If we are unable to support our continued growth, our business could suffer.    We have experienced rapid and substantial growth. As we continue to grow, the complexity of our operations increases, placing greater demands on our management. Our ability to manage our growth effectively depends on our ability to implement and improve our financial and management information systems on a timely basis and to effect other changes in our business including, the ability to monitor and improve manufacturing systems, information technology, and quality and regulatory compliance systems, among others. Unexpected difficulties during expansion, the failure to attract and retain

 

- 21 -


qualified employees, the failure to successfully replace or upgrade our management information systems, the failure to manage costs or our inability to respond effectively to growth or plan for future expansion could cause our growth to stop. If we fail to manage our growth effectively and efficiently, our costs could increase faster than our revenues and our business results could suffer.

 

If we fail to integrate our recent acquisitions with our operations, our business could suffer.    We continue to integrate our recent acquisitions into our operations and we may find it difficult to integrate the operations as personnel may leave and licensees, distributors or suppliers may terminate their arrangements or demand amended terms to these arrangements. Additionally, our management may have their attention diverted while trying to integrate these businesses. If we are not able to successfully integrate the operations, we may not realize the anticipated benefits of the acquisitions.

 

We are subject to various risks relating to international activities that could affect our overall profitability.    We manufacture substantially all of our products outside the United States and sell a significant portion of our products in non-U.S. markets. Sales outside North and Latin America accounted for approximately 46% and 44% of our net revenues in the years ended June 30, 2014 and 2013, respectively. We expect that sales within these areas will account for approximately 45% of our net revenues in the foreseeable future. Our sales and operations outside of the U.S. are subject to several difficulties and risks that are separate and distinct from those we face in the U.S., including:

 

  •  

fluctuations in currency exchange rates;

 

  •  

tariffs and other trade barriers;

 

  •  

compliance with foreign medical device manufacturing regulations;

 

  •  

difficulty in enforcing agreements and collecting receivables through foreign legal systems;

 

  •  

reduction in third-party payor reimbursement for our products;

 

  •  

inability to obtain import licenses;

 

  •  

changes in trade policies and in U.S. and foreign tax policies;

 

  •  

possible changes in export or import restrictions; and

 

  •  

the modification or introduction of other governmental policies with potentially adverse effects.

 

Any of the above factors may have a material adverse effect on our ability to increase or maintain our non-U.S sales.

 

Government and private insurance plans may not adequately reimburse our customers for our products, which could result in reductions in sales or selling prices for our products.    Our ability to sell our products depends in large part on the extent to which coverage and reimbursement for our products will be available from government health administration authorities, private health insurers and other organizations. These third-party payers are increasingly challenging the prices charged for medical products and services and can, without notice, deny coverage for our products or treatments that may include the use of our products. Therefore, even if a product is approved for marketing, we cannot make assurances that coverage and reimbursement will be available for the product, that the reimbursement amount will be adequate or that the reimbursement amount, even if initially adequate, will not be subsequently reduced. For example, in some markets, such as Spain, France and Germany, government coverage and reimbursement are currently available for the purchase or rental of our products but are subject to constraints such as price controls or unit sales limitations. In other markets, such as Australia, there is currently limited or no reimbursement for devices that treat SDB conditions. As we continue to develop new products, those products will generally not qualify for coverage and reimbursement until they are approved for marketing, if at all.

 

- 22 -


In the United States, we sell our products primarily to home healthcare dealers, hospitals and to sleep clinics. Reductions in reimbursement to our customers by third-party payers, if they occur, may have a material impact on our customers and, therefore, may indirectly affect our sales to, or the collectability of receivables we have from, those customers. A development affecting reimbursement negatively stems from the Medicare competitive bidding program mandated by the Medicare Prescription Drug, Improvement, and Modernization Act of 2003, or MMA. Under the program, our customers who provide home healthcare services must compete to offer products in designated competitive bidding areas, or CBAs. Under PPACA, by 2016, the competitive bidding process must either be rolled-out nationally or Medicare prices in non-competitive bidding areas must be reduced to match competitive bidding prices.

 

The Centers for Medicare & Medicaid Services, or CMS, the agency responsible for administering the Medicare program, rolled out the competitive bidding program in 9 CBAs and included home medical equipment, or HME, such as oxygen and oxygen equipment, CPAP and respiratory assist devices, and related supplies and accessories. On July 2, 2010, CMS announced the single payment amount – the amount paid to successful bidders – for the first round of the competitive bidding and began offering contracts to qualifying home health companies, effective January 1, 2011. The average reduction from current Medicare payment rates in this first round of competitive bidding was approximately 32% overall and 34% for CPAP and respiratory devices and became effective January 1, 2011. On January 30, 2013, CMS announced the single payment amounts for the second round, which cover a total of 91 CBAs. For CPAP and respiratory devices, the average reduction from current Medicare payment rates in the second round was approximately 47% on a weighted average basis, effective July 1, 2013. CMS is required by law to recompete these contracts at least once every three years. Accordingly, on July 15, 2014, CMS announced plans to conduct a Round 2 Recompete, where suppliers awarded contracts in the second round of competitive bidding will recompete. CMS is expected to announce the bidding schedule for the recompete in Fall 2014.

 

We cannot predict at this time the full impact the competitive bidding program and the developments in the competitive bidding program will have on our business and financial condition.

 

Healthcare reform, including recently enacted legislation, may have a material adverse effect on our industry and our results of operations.    In March 2010, the Patient Protection and Affordable Care Act, as amended by the Health Care and Education Reconciliation Act (collectively, the “PPACA”) was signed into law in the United States. The PPACA makes changes that are expected to impact the medical device industry. One of the principal purposes of the PPACA was to expand health insurance coverage to approximately 32 million Americans who were uninsured. The PPACA requires adults not covered by an employer- or government-sponsored insurance plan to maintain health insurance coverage or pay a penalty, a provision commonly referred to as the individual mandate. We cannot predict the impact of these coverage expansions, if any, on the sales of our products.

 

The PPACA also contains a number of provisions designed to generate the revenues necessary to fund the coverage expansions. This includes new fees or taxes on certain health-related industries, including medical device manufacturers. Beginning in 2013, entities that manufacture, produce or import medical devices were required to pay an excise tax in an amount equal to 2.3% of the price for which such devices are sold in the United States. This excise tax is applicable to our products that are primarily used in hospitals and sleep labs, which includes the ApneaLink, VPAP Tx, certain Respiratory Care and dental sleep products. In addition to the competitive bidding changes discussed above, the PPACA also includes, among other things, demonstrations to develop organizations that are paid under a new payment methodology for voluntary coordination of care by groups of providers, such as physicians and hospitals, and the establishment of a new Patient-Centered Outcomes Research Institute to oversee, identify priorities in and conduct comparative clinical effectiveness research. The

 

- 23 -


increased funding and focus on comparative clinical effectiveness research, which compares and evaluates the risks and benefits, clinical outcomes, effectiveness and appropriateness of products, may result in lower reimbursements by payers for our products and decreased profits to us.

 

Other federal legislative changes have been proposed and adopted since the PPACA was enacted. On August 2, 2011, the President signed into law the Budget Control Act of 2011, which, among other things, creates the Joint Select Committee on Deficit Reduction to recommend proposals in spending reductions to Congress. The Joint Select Committee did not achieve a targeted deficit reduction of at least $1.2 trillion for the years 2013 through 2021, triggering the legislation’s automatic reduction to several government programs. This includes aggregate reductions to Medicare payments to providers, including home healthcare companies, of up to 2% per fiscal year, which went into effect on April 1, 2013 and will remain in effect through 2024 unless additional Congressional action is taken. On January 2, 2013, the American Taxpayer Relief Act of 2012, or the ATRA, was signed into law, which, among other things, further reduced Medicare payments to several providers, including hospitals, and increased the statute of limitations period for the government to recover overpayments to providers from three to five years.

 

Various healthcare reform proposals have also emerged at the state level within the United States.

 

The PPACA as well as other federal and/or state healthcare reform measures that may be adopted in the future, singularly or in the aggregate, could have a material adverse effect on our business, financial condition and results of operations.

 

Failure to comply with anti-kickback and fraud regulations could result in substantial penalties and changes in our business operations.    Although we do not provide healthcare services, submit claims for third-party reimbursement, or receive payments directly from Medicare, Medicaid or other third-party payors for our products, we are subject to healthcare fraud and abuse regulation and enforcement by federal, state and foreign governments, which could significantly impact our business. In the United States, the laws that may affect our ability to operate include, but are not limited to:

 

  •  

the federal Anti-Kickback Statute, which prohibits, among other things, persons and entities from knowingly and willfully soliciting, receiving, offering, or paying remuneration, directly or indirectly, in cash or in kind, in exchange for or to induce either the referral of an individual for, or the purchase, lease, order or recommendation of, any good, facility, item or service for which payment may be made, in whole or in part, under federal healthcare programs such as Medicare and Medicaid. A person or entity does not need to have actual knowledge of this statute or specific intent to violate it to have committed a violation. The U.S. government has interpreted this law broadly to apply to the marketing and sales activities of manufacturers and distributors like us;

 

  •  

federal civil and criminal false claims laws and civil monetary penalty laws, including civil whistleblower or qui tam actions, that prohibit, among other things, knowingly presenting, or causing to be presented, claims for payment or approval to the federal government that are false or fraudulent, knowingly making a false statement material to an obligation to pay or transmit money or property to the federal government or knowingly concealing or knowingly and improperly avoiding or decreasing an obligation to pay or transmit money or property to the federal government. These laws may apply to manufacturers and distributors who provide information on coverage, coding, and reimbursement of their products to persons who do bill third-party payers;

 

  •  

the federal Health Insurance Portability and Accountability Act of 1996, or HIPAA, which created federal criminal laws that prohibit executing a scheme to defraud any healthcare benefit program or making false statements relating to healthcare matters. A person or entity does not need to have actual knowledge of these statutes or specific intent to violate them to have committed a violation;

 

  •  

HIPAA, as amended by the Health Information Technology for Economic and Clinical Health Act of 2009, or HITECH, and their respective implementing regulations, which impose requirements

 

- 24 -


 

on certain covered healthcare providers, health plans and healthcare clearinghouses as well as their business associates that perform services for them that involve individually identifiable health information, relating to the privacy, security and transmission of individually identifiable health information without appropriate authorization, including mandatory contractual terms as well as directly applicable privacy and security standards and requirements;

 

  •  

the federal Physician Sunshine Act requirements under the PPACA, which impose new reporting and disclosure requirements on device and drug manufacturers for any “transfer of value” made or distributed by certain manufacturers of drugs, devices, biologics, and medical supplies to physicians (defined to include doctors, dentists, optometrists, podiatrists and chiropractors) and teaching hospitals, and ownership and investment interests held by physicians and their immediate family members.

 

  •  

state and foreign law equivalents of each of the above federal laws, such as state anti-kickback and false claims laws that may apply to items or services reimbursed by any third-party payor, including commercial insurers; state laws that require device companies to comply with the industryÂ’s voluntary compliance guidelines and the relevant compliance guidance promulgated by the federal government, or otherwise restrict payments that may be made to healthcare providers and other potential referral sources; state laws that require device manufacturers to report information related to payments and other transfers of value to physicians and other healthcare providers or marketing expenditures; and state and foreign laws governing the privacy and security of health information in certain circumstances, many of which differ from each other in significant ways and often are not preempted by HIPAA.

 

The scope and enforcement of these laws are uncertain and subject to rapid change in the current environment of healthcare reform, especially in light of the lack of applicable precedent and regulations. Federal and state enforcement bodies have recently increased their scrutiny of interactions between healthcare companies and healthcare providers, which has led to a number of investigations, prosecutions, convictions and settlements in the healthcare industry. Responding to investigations can be time-and resource-consuming and can divert managementÂ’s attention from the business. Additionally, as a result of these investigations, healthcare providers and entities may have to agree to additional onerous compliance and reporting requirements as part of a consent decree or corporate integrity agreement. Any such investigation or settlement could increase our costs or otherwise have an adverse effect on our business. We also are subject to foreign fraud and abuse laws, which vary by country.

 

If our operations are found to be in violation of any of the laws described above or any other governmental regulations that apply to us now or in the future, we may be subject to penalties, including civil and criminal penalties, damages, fines, disgorgement, exclusion from governmental health care programs, and the curtailment or restructuring of our operations, any of which could adversely affect our ability to operate our business and our financial results.

 

Complying with Food and Drug Administration, or FDA, and other regulations is an expensive and time-consuming process, and any failure to comply could have a materially adverse effect on our business, financial condition, or results of operations.    We are subject to extensive U.S. federal, state, local and international regulations regarding our business activities. Failure to comply with these regulations could result in, among other things, recalls of our products, substantial fines and criminal charges against us or against our employees. Furthermore, our products could be subject to recall if the FDA, other regulators or we determine, for any reason, that our products are not safe or effective. Any recall or other regulatory action could increase our costs, damage our reputation, affect our ability to supply customers with the quantity of products they require and materially affect our operating results.

 

- 25 -


Product sales, introductions or modifications may be delayed or canceled as a result of FDA regulations or similar foreign regulations, which could cause our sales and profits to decline.    Unless a product is exempt, before we can market or sell a new medical device in the United States, we must obtain FDA clearance or approval, which can be a lengthy and time-consuming process. We generally receive clearance from the FDA to market our products in the United States under Section 510(k) of the Federal Food, Drug, and Cosmetic Act or our products are exempt from the Section 510(k) clearance process. The 510(k) clearance process can be expensive, time-consuming and uncertain. In the 510(k) clearance process, the FDA must determine that a proposed device is “substantially equivalent” to a device legally on the market, known as a “predicate” device, with respect to intended use, technology and safety and effectiveness, in order to clear the proposed device for marketing. The FDA has a high degree of latitude when evaluating submissions and may determine that a proposed device submitted for 510(k) clearance is not substantially equivalent to a predicate device. After a device receives 510(k) premarket notification clearance from the FDA, any modification that could significantly affect its safety or effectiveness, or that would constitute a major change in the intended use of the device, technology, materials, packaging, and certain manufacturing processes may require a new 510(k) clearance or premarket approval. We have modified some of our Section 510(k) approved products without submitting new Section 510(k) notices, which we do not believe were required. However, if the FDA disagrees with us and requires us to submit new Section 510(k) notifications for modifications to our existing products, we may be required to stop marketing the products while the FDA reviews the Section 510(k) notification.

 

Any new product introduction or existing product modification could be subjected to a lengthier, more rigorous FDA examination process. For example, in certain cases we may need to conduct clinical trials of a new product before submitting a 510(k) notice. We may also be required to obtain premarket approvals for certain of our products. Indeed, recent trends in the FDAÂ’s review of premarket notification submissions suggest that the FDA is often requiring manufacturers to provide new, more expansive, or different information regarding a particular device than what the manufacturer anticipated upon 510(k) submission. This has resulted in increasing uncertainty and delay in the premarket notification review process.

 

For example, the FDA is currently reviewing its guidance describing when it believes a manufacturer is obligated to submit a new 510(k) for modifications or changes to a previously cleared device. The FDA is expected to issue revised guidance to assist device manufacturers in making this determination. It is unclear whether the FDA’s approach in this new guidance will result in substantive changes to existing policy and practice regarding the assessment of whether a new 510(k) is required for changes or modifications to existing devices. The FDA’s ongoing review of the 510(k) program may make it more difficult for us to make modifications to our previously cleared products, either by imposing more strict requirements on when a manufacturer must submit a new 510(k) for a modification to a previously cleared product, or by applying more onerous review criteria to such submissions. FDA continues to review its 510(k) clearance process which could result in additional changes to regulatory requirements or guidance documents which could increase the costs of compliance, or restrict our ability to maintain current clearances. The requirements of the more rigorous premarket approval process and/or significant changes to the Section 510(k) clearance process could delay product introductions and increase the costs associated with FDA compliance. Marketing and sale of our products outside the United States are also subject to regulatory clearances and approvals, and if we fail to obtain these regulatory approvals, our sales could suffer. We cannot assure you that any new products we develop will receive required regulatory approvals from U.S. or foreign regulatory agencies.

 

- 26 -


We are subject to substantial regulation related to quality standards applicable to our manufacturing and quality processes. Our failure to comply with these standards could have an adverse effect on our business, financial condition, or results of operations.    The FDA regulates the approval, manufacturing, and sales and marketing of many of our products in the U.S. Significant government regulation also exists in Canada, Japan, Europe, and other countries in which we conduct business. As a device manufacturer, we are required to register with the FDA and are subject to periodic inspection by the FDA for compliance with the FDA’s Quality System Regulation requirements, which require manufacturers of medical devices to adhere to certain regulations, including testing, quality control and documentation procedures. In addition, the federal Medical Device Reporting regulations require us to provide information to the FDA whenever there is evidence that reasonably suggests that a device may have caused or contributed to a death or serious injury or, if a malfunction were to occur, could cause or contribute to a death or serious injury. Compliance with applicable regulatory requirements is subject to continual review and is rigorously monitored through periodic inspections by the FDA. In the European Community, we are required to maintain certain ISO certifications in order to sell our products and must undergo periodic inspections by notified bodies to obtain and maintain these certifications. Failure to comply with current governmental regulations and quality assurance guidelines could lead to temporary manufacturing shutdowns, product recalls or related field actions, product shortages or delays in product manufacturing. Efficacy or safety concerns, an increase in trends of adverse events in the marketplace, and/or manufacturing quality issues with respect to our products could lead to product recalls or related field actions, withdrawals, and/or declining sales.

 

Off-label marketing of our products could result in substantial penalties.    The FDA strictly regulates the promotional claims that may be made about FDA-cleared products. In particular, clearance under Section 510(k) only permits us to market our products for the uses indicated on the labeling cleared by the FDA. We may request additional label indications for our current products, and the FDA may deny those requests outright, require additional expensive clinical data to support any additional indications or impose limitations on the intended use of any cleared products as a condition of clearance. If the FDA determines that we have marketed our products for off-label use, we could be subject to fines, injunctions or other penalties. It is also possible that other federal, state or foreign enforcement authorities might take action if they consider our business activities to constitute promotion of an off-label use, which could result in significant penalties, including, but not limited to, criminal, civil and administrative penalties, damages, fines, disgorgement, exclusion from participation in government healthcare programs, and the curtailment of our operations. Any of these events could significantly harm our business and results of operations and cause our stock price to decline.

 

Disruptions in the supply of components from our single source suppliers could result in a significant reduction in sales and profitability.    We purchase uniquely configured components for our devices from various suppliers, including some who are single-source suppliers for us. We cannot assure you that a replacement supplier would be able to configure its components for our devices on a timely basis or, in the alternative, that we would be able to reconfigure our devices to integrate the replacement part. A reduction or halt in supply while a replacement supplier reconfigures its components, or while we reconfigure our devices for the replacement part, would limit our ability to manufacture our devices, which could result in a significant reduction in sales and profitability. We cannot assure you that our inventories would be adequate to meet our production needs during any prolonged interruption of supply.

 

We are subject to potential product liability claims that may exceed the scope and amount of our insurance coverage, which would expose us to liability for uninsured claims.    We are subject to potential product liability claims as a result of the design, manufacture and marketing of medical devices. Any product liability claim brought against us, with or without merit, could result in the

 

- 27 -


increase of our product liability insurance rates. In addition, we would have to pay any amount awarded by a court in excess of our policy limits. Our insurance policies have various exclusions, and thus we may be subject to a product liability claim for which we have no insurance coverage, in which case, we may have to pay the entire amount of any award. We cannot assure you that our insurance coverage will be adequate or that all claims brought against us will be covered by our insurance and we cannot assure you that we will be able to obtain insurance in the future on terms acceptable to us or at all. A successful product liability claim brought against us in excess of our insurance coverage, if any, may require us to pay substantial amounts, which could harm our business.

 

Our intellectual property may not protect our products, and/or our products may infringe on the intellectual property rights of third-parties.    We rely on a combination of patents, trade secrets and non-disclosure agreements to protect our intellectual property. Our success depends, in part, on our ability to obtain and maintain United States and foreign patent protection for our products, their uses and our processes to preserve our trade secrets and to operate without infringing on the proprietary rights of third-parties. We have a number of pending patent applications, and we do not know whether any patents will issue from any of these applications. We do not know whether any of the claims in our issued patents or pending applications will provide us with any significant protection against competitive products or otherwise be commercially valuable. Legal standards regarding the validity of patents and the proper scope of their claims are still evolving, and there is no consistent law or policy regarding the valid breadth of claims. Additionally, there may be third-party patents, patent applications and other intellectual property relevant to our products and technology which are not known to us and that block or compete with our products.

 

We face the risks that:

 

  •  

third-parties will infringe our intellectual property rights;

 

  •  

our non-disclosure agreements will be breached;

 

  •  

we will not have adequate remedies for infringement;

 

  •  

our trade secrets will become known to or independently developed by our competitors; or

 

  •  

third-parties will be issued patents that may prevent the sale of our products or require us to license and pay fees or royalties in order for us to be able to market some of our products.

 

Litigation may be necessary to enforce patents issued to us, to protect our proprietary rights, or to defend third-party claims that we have infringed upon proprietary rights of others. The defense and prosecution of patent claims, including these pending claims, as well as participation in other inter-party proceedings, can be expensive and time-consuming, even in those instances in which the outcome is favorable to us. If the outcome of any litigation or proceeding brought against us were adverse, we could be subject to significant liabilities to third-parties, could be required to obtain licenses from third-parties, could be forced to design around the patents at issue or could be required to cease sales of the affected products. A license may not be available at all or on commercially viable terms, and we may not be able to redesign our products to avoid infringement. Additionally, the laws regarding the enforceability of patents vary from country to country, and we cannot assure you that any patent issues we face will be uniformly resolved, or that local laws will provide us with consistent rights and benefits.

 

We are subject to tax audits by various tax authorities in many jurisdictions.    From time to time we may be audited by tax authorities in various jurisdictions. Any final assessment resulting from such audits could result in material changes to our past or future taxable income, tax payable or deferred tax assets, and could require us to pay penalties and interest that could materially adversely affect our financial results.

 

- 28 -


Our quarterly operating results are subject to fluctuation for a variety of reasons.    Our operating results have, from time to time, fluctuated on a quarterly basis and may be subject to similar fluctuations in the future. These fluctuations may result from a number of factors, including:

 

  •  

the introduction of new products by us or our competitors;

 

  •  

the geographic mix of product sales;

 

  •  

the success and costs of our marketing efforts in new regions;

 

  •  

changes in third-party payor reimbursement;

 

  •  

timing of regulatory clearances and approvals;

 

  •  

timing of orders by distributors;

 

  •  

expenditures incurred for research and development;

 

  •  

competitive pricing in different regions;

 

  •  

the effect of foreign currency transaction gains or losses; and

 

  •  

other activities of our competitors.

 

Fluctuations in our quarterly operating results may cause the market price of our common stock to fluctuate.

 

If a natural or man-made disaster strikes our manufacturing facilities, we will be unable to manufacture our products for a substantial amount of time and our sales and profitability will decline.    Our facilities and the manufacturing equipment we use to produce our products would be costly to replace and could require substantial lead-time to repair or replace. The facilities may be affected by natural or man-made disasters and in the event they were affected by a disaster, we would be forced to rely on third-party manufacturers. Although we believe we possess adequate insurance for the disruption of our business from causalities, such insurance may not be sufficient to cover all of our potential losses and may not continue to be available to us on acceptable terms, or at all.

 

Delaware law and provisions in our charter and could make it difficult for another company to acquire us.    Provisions of our certificate of incorporation may have the effect of delaying or preventing changes in control or management which might be beneficial to us or our security holders. In particular, our board of directors is divided into three classes, serving for staggered three-year terms. Because of this classification, it will require at least two annual meetings to elect directors constituting a majority of our board of directors. Additionally, our board of directors has the authority to issue up to 2,000,000 shares of preferred stock and to determine the price, rights, preferences, privileges and restrictions, including voting rights, of those shares without further vote or action by the stockholders. The rights of the holders of our common stock will be subject to, and may be adversely affected by, the rights of the holders of any preferred stock that may be issued in the future. The issuance of preferred stock may have the effect of delaying, deferring or preventing a change in control, may discourage bids for our common stock at a premium over the market price of our common stock and may adversely affect the market price of our common stock and the voting and other rights of the holders of our common stock.

 

You may not be able to enforce the judgments of U.S. courts against some of our assets or officers and directors.    A substantial portion of our assets are located outside the United States. Additionally, some of our directors and executive officers reside outside the United States, along with all or a substantial portion of their assets. As a result, it may not be possible for investors to enforce judgments of U.S. courts relating to any liabilities under U.S. securities laws against our assets, those persons or their assets. In addition, investors may not be able to pursue claims based on U.S. securities laws against these assets or these persons in Australian courts, where most of these assets and persons reside.

 

- 29 -


We are increasingly dependent on information technology systems and infrastructure.    Our technology systems are potentially vulnerable to breakdown or other interruption by fire, power loss, system malfunction, unauthorized access and other events. Likewise, data privacy breaches by employees and others with both permitted and unauthorized access to our systems may pose a risk that sensitive data may be exposed to unauthorized persons or to the public, or may be permanently lost. While we have invested heavily in the protection of data and information technology and in related training, there can be no assurance that our efforts will prevent significant breakdowns, breaches in our systems or other cyber incidents that could have a material adverse effect upon the reputation, business, operations or financial condition of the company. In addition, significant implementation issues may arise as we continue to consolidate and outsource certain computer operations and application support activities.

 

Our results of operations may be materially affected by global economic conditions generally, including conditions in the financial markets.    Recently, concerns over inflation, energy costs, geopolitical issues, the availability and cost of credit, the United States mortgage market, a declining residential real estate market in the United States, and the ability of sovereign nations to pay their debts have contributed to increased volatility and diminished expectations for the economy and the financial markets going forward. These factors, combined with volatile commodity prices, declining business and consumer confidence and increased unemployment, have precipitated an economic slowdown. It is difficult to predict how long the current economic conditions will continue and whether the economic conditions will continue to deteriorate. If the economic climate in the United States or outside the United States continues to deteriorate or there is a shift in government spending priorities, customers or potential customers could reduce or delay their purchases, which could impact our revenue, our ability to manage inventory levels, collect customer receivables, and ultimately decrease our profitability.

 

ITEM 1B UNRESOLVED STAFF COMMENTS

 

We have received no written comments regarding our periodic or current reports from the staff of the Securities and Exchange Commission that were issued 180 days or more preceding the end of our fiscal year 2014 that remain unresolved.

 

ITEM 2 PROPERTIES

 

We conduct our operations in both owned and leased properties. Our principal executive offices and U.S. sales facilities, consisting of approximately 230,000 square feet, are located on Spectrum Center Boulevard in San Diego, California, in a building we own. We have our research and development and office facilities and our principal manufacturing facility at our owned site in Norwest, Sydney, Australia. Sales and warehousing facilities are leased in South Carolina, U.S.A.; Georgia, U.S.A.; Abingdon, England; Munich, Bremen, Hochstadt, Germany; Lyon, Paris, France; Basel, Switzerland; Stockholm, Sweden; Helsinki, Finland; Oslo, Norway; New Delhi, India; Tokyo, Japan and Dublin, Ireland.

 

- 30 -


We believe that our facilities are adequate to meet the needs of our current business operations. At June 30, 2014, our principal owned and leased properties were as follows:

 

Location    Ownership Status
(Owned / Leased)
   Square footage      Primary Usage
San Diego,
California
   Owned      230,000       Corporate headquarters, sales and administration
Norwest,
Sydney,
Australia
   Owned      224,000       Principal manufacturing facility, engineering,  research and development
Chatsworth,
California
   Leased      72,000       Motor manufacturing, engineering, research and  development
Duncan,
South
Carolina
   Leased      174,000       Manufacturing, warehouse and distribution
Atlanta,
Georgia
   Leased      470,000       Warehouse and distribution
Moreno
Valley,
California
   Leased      130,000       Warehouse and distribution
Singapore,
Singapore
   Leased      95,000       Manufacturing facility
Munich,
Germany
   Leased      119,000       Sales and distribution, research and development
Lyon, France    Leased      52,000       Sales and distribution
Paris, France    Leased      43,000       Manufacturing facility, field service
Freudenstadt,
Germany
   Owned      43,000       Manufacturing facility
Johor Bahru,
Malaysia
   Leased      46,000       Manufacturing facility

 

ITEM 3 LEGAL PROCEEDINGS

 

We have initiated several legal proceedings to enforce our intellectual property rights.

 

In 2013, we initiated actions in the U.S. and Germany against Taiwanese manufacturer APEX to stop the infringement of several ResMed patents. In 2013, the U.S. International Trade Commission entered a consent order against APEX, ordering that it not import or sell after import products that infringe the claims of the patents that ResMed asserted against APEX. In 2014, the ITC found that certain products redesigned by APEX were covered by the consent order, and that certain products were not. In 2014, the Munich District Court ruled that it intends to issue a permanent injunction prohibiting APEX from marketing and selling certain products in Germany. These proceedings are ongoing.

 

In 2013, we filed actions in the U.S. and Germany against Chinese manufacturer BMC Medical Co., Ltd to stop the infringement of several ResMed patents. The U.S. International Trade Commission

 

- 31 -


initiated an investigation in 2013, but has not yet made a decision in its matter. In 2013, we obtained a preliminary injunction prohibiting BMC from marketing and selling certain products accused of patent infringement in Germany. It remains in effect until November 2014. Proceedings in Germany continue regarding other ResMed patents.

 

Litigation is inherently uncertain. Accordingly, we cannot predict the outcome of these matters. But we do not expect the outcome of these matters to have a material adverse effect on our consolidated financial statements when taken as a whole.

 

ITEM 4 MINE SAFETY DISCLOSURES

 

Not Applicable.

 

- 32 -



PART II

 


 

ITEM 5 MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

 

Our common stock is traded on the NYSE under the symbol “RMD”. The following table sets forth for the fiscal periods indicated the high and low closing prices for the common stock as reported by the NYSE.

 

     2014      2013  
     High      Low      High      Low  
   

Quarter One, Ended September 30

   $ 54.36      $ 43.26      $ 40.47      $ 30.63  

Quarter Two, Ended December 31

     57.11        45.36         42.77        38.82   

Quarter Three, Ended March 31

     47.82        42.03         48.37         42.36  

Quarter Four, Ended June 30

     53.76        44.43         51.17         44.02   

 

At July 28, 2014, there were 28 holders of record of our common stock, although many of these holders of record own shares as nominees on behalf of other beneficial owners. During fiscal years 2014 and 2013, we paid dividends totaling $141.5 million and $97.2 million, respectively. On July 31, 2014, we announced an increase in the quarterly dividend from $0.25 per share to $0.28 per share. We pay the dividend in U.S. currency to holders of our common stock trading on the NYSE. Holders of CDIs trading on the ASX will receive an equivalent amount in Australian currency based on the exchange rate on the record date and reflecting the 10:1 ratio between CDIs and NYSE shares. We expect the dividend will continue to be unfranked for Australian tax purposes. We expect to fund our dividend commitments with our operating cash flows and existing loan facilities.

 

Securities Authorized for Issuance Under Equity Compensation Plans

 

The information included under Item 12 of Part III of this Report, “Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters,” is hereby incorporated by reference into this Item 5 of Part II of this Report.

 

- 33 -


Purchases of Equity Securities

 

The following table summarizes purchases by us of our common stock during the fiscal year ending June 30, 2014:

 

Period    Total
Number
of Shares
Purchased
     Average
Price Paid
per Share
     Total Number of Shares
Purchased as Part of
Publicly Announced
Programs(1)
     Maximum Number of
Shares that May Yet Be
Purchased Under the
Programs(1)
 

July 2013

     0       $ 0         32,026,013         4,549,168   

August 2013

     356,492         48.88         32,382,505         4,192,676   

September 2013

     75,203         48.34         32,457,708         4,117,473   

October 2013

     33,305         49.62         32,491,013         4,084,168   

November 2013

     476,060         50.20         32,967,073         3,608,108   

December 2013

     1,033,940         46.9         34,001,013         2,574,168   

January 2014

     265,000         43.91         34,266,013         2,309,168   

February - February 21, 2014

     450,000         44.4         34,716,013         1,859,168   

New Program Authorization(1)

                                20,000,000   

February 22 - February 28, 2014

     324,534         44.48         35,040,547         19,675,466   

March 2014

     600,466         44.11         35,641,013         19,075,000   

April 2014

     65,100         48.06         35,706,113         19,009,900   

May 2014

     274,595         50.02         35,980,708         18,735,305   

June 2014

     461,787         51.03         36,442,495         18,273,518   

Total

     4,416,482       $ 47.11         36,442,495         18,273,518   

 

1. On February 21, 2014, our board of directors approved a new share repurchase program, authorizing us to acquire up to an aggregate of 20 million shares of our common stock. The program allows us to repurchase shares of our common stock from time to time for cash in the open market, or in negotiated or block transactions, as market and business conditions warrant and subject to applicable legal requirements. This program canceled and replaced our previous share repurchase program authorized on August 24, 2011, under which we had repurchased 18.1 million shares. The 20 million shares authorized to be repurchased under this new program are in addition to the shares we repurchased on or before February 21, 2014 under our previous programs. There is no expiration date for this program, and the program may be accelerated, suspended, delayed or discontinued at any time at the discretion of our board of directors. All share repurchases after February 21, 2014 have been executed under this program. Since the inception of the share buyback programs, we have repurchased 36.4 million shares at a total cost of $1.3 billion.

 

- 34 -


PERFORMANCE GRAPH

 

This performance graph is furnished and shall not be deemed “filed” with the SEC or subject to Section 18 of the Exchange Act, nor shall it be deemed incorporated by reference in any of our filings under the Securities Act of 1933, as amended.

 

The following graph compares the cumulative total stockholders return on our common stock from June 30, 2009 through June 30, 2014, with the comparable cumulative return of the S&P 500 index, the S&P 500 Health Care index, and the Dow Jones US Medical Devices index. The graph assumes that $100 was invested in our common stock and each index on June 30, 2009. In addition, the graph assumes the reinvestment of all dividends paid. The stock price performance on the following graph is not necessarily indicative of future stock price performance.

 

LOGO

 

The following table shows total indexed return of stock price plus reinvestments of dividends, assuming an initial investment of $100 at June 30, 2009, for the indicated periods.

 

Index   June 2009     June 2010     June 2011     June 2012     June 2013     June 2014  
   

ResMed Inc

    100        149        152        153        223        253   

S&P 500

    100        112        144        148        175        213   

S&P 500 Health Care

    100        107        134        144        180        230   

Dow Jones US Medical Devices

    100        121        152        150        180        235   

 

- 35 -


ITEM 6 SELECTED FINANCIAL DATA

 

The following table summarizes certain selected consolidated financial data for, and as of the end of, each of the fiscal years in the five-year period ended June 30, 2014. The data set forth below should be read in conjunction with Item 7 of Part II of this annual report, “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and Item 8 of Part II of this annual report, “Consolidated Financial Statements and Supplementary Data”, and related Notes included elsewhere in this annual report. The consolidated statement of income data for the years ended June 30, 2014, 2013 and 2012 and the consolidated balance sheet data as of June 30, 2014 and 2013 are derived from our audited consolidated financial statements included elsewhere in this annual report. The consolidated statement of income data for the years ended June 30, 2011 and 2010 and the consolidated balance sheet data as of June 30, 2012, 2011 and 2010 are derived from our audited consolidated financial statements not included herein. Historical results are not necessarily indicative of the results to be expected in the future, and the results for the years presented should not be considered indicative of our future results of operations.

 

   
Consolidated Statement of Income Data   Years Ended June 30,  
(In thousands, except per share data):   2014     2013     2012     2011     2010  

Net revenues

  $ 1,554,973     $ 1,514,457     $ 1,368,515     $ 1,243,148     $ 1,092,357  

Cost of sales

    565,187       573,800       547,780       501,822       436,874  

Gross profit

    989,786       940,657       820,735       741,326       655,483  
Selling, general and administrative expenses     450,414       430,802       402,621       372,249       331,858  
Research and development expenses     118,226       120,124       109,733       92,007       75,202  
Restructuring expenses     6,326       -        -        -        -   
Education, research and settlement charge     -        24,765       -        -        -   
Amortization of acquired intangible assets     9,733       10,142       13,974       10,146       8,041  

Total operating expenses

    584,699       585,833       526,328       474,402       415,101  

Income from operations

    405,087       354,824       294,407       266,924       240,382  

Other income:

                                       

Interest income, net

    25,107       32,486       29,080       26,043       14,029  

Other, net

    884       (2,191 )      8,458       10,740       6,178  

Total other income, net

    25,991       30,295       37,538       36,783       20,207  

Income before income taxes

    431,078       385,119       331,945       303,707       260,589  

Income taxes

    (85,805 )      (77,986 )      (77,095 )      (76,721 )      (70,504 ) 

Net income

  $ 345,273     $ 307,133     $ 254,850     $ 226,986     $ 190,085  

Basic earnings per share

  $ 2.44     $ 2.15     $ 1.75     $ 1.49     $ 1.26  

Diluted earnings per share

  $ 2.39     $ 2.10     $ 1.71     $ 1.44     $ 1.23  

Dividends per share

  $ 1.00     $ 0.68     $ -      $ -      $ -   

Weighted average:

                                       

Basic shares outstanding

    141,474       142,954       145,901       152,471       150,908  

Diluted shares outstanding

    144,359       146,410       149,316       157,195       155,098  

 

- 36 -


Consolidated Balance Sheet Data   As of June 30,  
(In thousands):   2014     2013     2012     2011     2010  

Working capital

  $ 1,286,651     $ 874,800     $ 1,108,299     $ 1,083,612     $ 672,669  

Total assets

    2,360,962       2,210,721       2,137,869       2,068,922       1,626,397  

Long-term debt, less current maturities

    300,770       769       250,783       100,000       -   

Total stockholdersÂ’ equity

  $ 1,758,248     $ 1,610,516     $ 1,607,627     $ 1,730,737     $ 1,287,536  

 

- 37 -


ITEM 7 MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

 

Overview

 

ManagementÂ’s discussion and analysis of financial condition and results of operations is intended to help the reader understand the results of operations and financial condition of ResMed Inc and subsidiaries. It is provided as a supplement to, and should be read in conjunction with the selected financial data and consolidated financial statements and notes included elsewhere in this Report.

 

We are a leading developer, manufacturer and distributor of medical equipment for treating, diagnosing, and managing sleep-disordered breathing (“SDB”) and other respiratory disorders. During the fiscal year, we continued our efforts to build awareness of the consequences of untreated SDB and to grow our business in this market. In our efforts, we have attempted to raise awareness through market and clinical initiatives and by highlighting the increasing link between the potential effects SDB can have on co-morbidities such as cardiac disease, diabetes, hypertension and obesity.

 

There are many studies being conducted that provide new evidence that treating SDB and OSA can improve health, quality of life and also mitigate the dangers of sleep apnea in occupational health and safety, especially in the transport industry. Evidence continues to mount supporting the role of SDB therapy for disease prevention, improvement of quality of life and healthcare cost reduction. The following three recent studies support the role of SDB therapy for disease prevention, improvement of quality of life and healthcare cost reduction:

 

  •  

In a ResMed-sponsored study published in Population Health Management involving 22,000 members on the Union Pacific Railroad health plan, findings suggest that a low-cost, patient-focused SDB education campaign can improve healthcare outcomes and reduce medical expenses. First, the study showed that members of the Union Pacific plan who had untreated SDB had higher medical expenses than employees without the disease and, second, it demonstrated that treatment of SDB with positive airway pressure (PAP) therapy reduced medical costs, in-patient costs and hospital admissions. After the campaign was initiated, the healthcare plan realized cost savings of $4.9 million over a two-year period.

 

  •  

A study published in the June 2012 issue of the American Journal of Managed Care demonstrated that newly diagnosed SDB patients who initiated PAP therapy had significantly lower hospitalization risk and lower all-cause healthcare costs compared to patients who did not use PAP.

 

  •  

In the July 2013 issue of the Journal of Cardiac Failure, a study showed that central sleep apnea and severe obstructive sleep apnea are independent risk factors for six-month cardiac hospital readmission.

 

We are committed to ongoing investment in research and development and product enhancements. During fiscal year 2014, we invested approximately $118.2 million on research and development activities, which represents approximately 8% of net revenues. Since the development of CPAP, we have developed a number of innovative products for the treatment of SDB and other respiratory disorders including airflow generators, diagnostic products, mask systems, headgear and other accessories. During fiscal year 2014, we released new products across both our mask and flow generator categories, including the AirFit™ P10, AirFit™ N10 and AirFit™F10 masks and the Astral™, our new generation life support ventilator. The release of these products as well as the release of VPAP COPD, Quattro Air, Swift FX Bella, Swift FX Nano and ResMed’s SleepSeeker in fiscal 2013, and a robust product pipeline, will continue to provide us with a strong platform for future growth.

 

Net revenue in fiscal year 2014 increased to $1,555.0 million, an increase of 3% compared to fiscal year 2013. Gross profit increased for the year ended June 30, 2014 to $989.8 million, from $940.7

 

- 38 -


million for the year ended June 30, 2013, an increase of $49.1 million or 5%. Our net income for the year ended June 30, 2014 was $345.3 million or $2.39 per diluted share compared to net income of $307.1 million or $2.10 per diluted share for the year ended June 30, 2013.

 

Total operating cash flow for fiscal year 2014 was $391.3 million and at June 30, 2014, our cash and cash equivalents totaled $905.7 million. Our total assets increased by 7% to $2.4 billion and our stockholders’ equity was $1.8 billion. During fiscal year 2014, we repurchased 4.4 million shares at a cost of $208.1 million under our share repurchase program, compared to 4.3 million shares at a cost of $188.0 million during fiscal year 2013. We paid a quarterly dividend of $0.25 per share during fiscal 2014 with a total amount of $141.5 million paid to stockholders.

 

In order to provide a framework for assessing how our underlying businesses performed, excluding the effect of foreign currency fluctuations, we provide certain financial information on a “constant currency basis”, which is in addition to the actual financial information presented. In order to calculate our constant currency information, we translate the current period financial information using the foreign currency exchange rates that were in effect during the previous comparable period. However, constant currency measures should not be considered in isolation or as an alternative to U.S. dollar measures that reflect current period exchange rates, or to other financial measures calculated and presented in accordance with U.S. generally accepted accounting principles.

 

Fiscal Year Ended June 30, 2014 Compared to Fiscal Year Ended June 30, 2013

 

Net Revenues.    Net revenue increased for the year ended June 30, 2014 to $1,555.0 million from $1,514.5 million for the year ended June 30, 2013, an increase of $40.5 million or 3%. The increase in net revenue was attributable to an increase in unit sales of our flow generators, masks and accessories, partially offset by a decline in average selling prices. Movements in international currencies against the U.S. dollar positively impacted net revenues by approximately $17.0 million for the year ended June 30, 2014. Excluding the impact of foreign currency movements, sales for the year ended June 30, 2014 increased by 2% compared to the year ended June 30, 2013.

 

Net revenue in North and Latin America decreased for the year ended June 30, 2014 to $839.1 million from $851.6 million for the year ended June 30, 2013, a decrease of $12.5 million or 1%. The decrease in net revenue is primarily attributable to increased competitor activity and a decline in average selling prices, partially offset by an increase in unit sales of our flow generators, masks and accessories.

 

Net revenue in markets outside North and Latin America increased for the year ended June 30, 2014 to $715.8 million from $662.8 million for the year ended June 30, 2013, an increase of $53.0 million or 8%. Movements in international currencies against the U.S. dollar favorably impacted international revenues by approximately $17.0 million during the year ended June 30, 2014. Excluding the impact of foreign currency movements, international sales for the year ended June 30, 2014 increased by 5%, compared to the year ended June 30, 2013. The increase in sales outside North and Latin America predominantly reflects an increase in unit sales of our flow generators, masks and accessories.

 

Net revenue from flow generators for the year ended June 30, 2014 totaled $846.7 million from $823.5 million for the year ended June 30, 2013, an increase of 3%, including an increase of 7% outside North and Latin America and a decrease of 2% in North and Latin America. Net revenue from masks and other accessories totaled $708.3 million, an increase of 3%, including an increase of 10% outside North and Latin America and a 1% decrease in North and Latin America, for the year ended June 30, 2014, compared to the year ended June 30, 2013.

 

- 39 -


The following table summarizes the percentage movements in our net revenue for the year ended June 30, 2014 compared to the year ended June 30, 2013:

 

     North and Latin
America
    International     Total     International
(Constant
Currency)*
    Total
(Constant
Currency)*
 

Flow generators

     -2 %      7 %      3 %      5 %      1 % 

Masks and other accessories

     -1 %      10 %      3 %      7 %      2 % 

Total

     -1 %      8 %      3 %      5 %      2 % 

 

* Constant currency numbers exclude the impact of movements in international currencies.

 

Gross Profit.    Gross profit increased for the year ended June 30, 2014 to $989.8 million from $940.7 million for the year ended June 30, 2013, an increase of $49.1 million or 5%. Gross profit as a percentage of net revenue was 63.7% for the year ended June 30, 2014, compared with the 62.1% for the year ended June 30, 2013. The improvement in gross margins was primarily due to cost savings attributable to manufacturing and supply chain improvements, favorable change in product mix as sales of our higher margin products represented a higher proportion of our sales, positive foreign currency impact due to the depreciation of the Australian dollar against the U.S. dollar and Euro, and a favorable geographic mix of sales, partially offset by declines in our average selling prices.

 

Selling, General and Administrative Expenses.    Selling, general and administrative expenses increased for the year ended June 30, 2014 to $450.4 million from $430.8 million for the year ended June 30, 2013, an increase of $19.6 million or 5%. The selling, general and administrative expenses were favorably impacted by the movement of international currencies against the U.S. dollar, which decreased our expenses by approximately $4.6 million, as reported in U.S. dollars. Excluding the impact of foreign currency movements, selling, general and administrative expenses for the year ended June 30, 2014 increased by 6% compared to the year ended June 30, 2013. As a percentage of net revenue, selling, general and administrative expenses for the year ended June 30, 2014 was 29.0%, compared to 28.4% for the year ended June 30, 2013.

 

The increase in selling, general and administrative expenses was primarily due to an increase the number of sales and administrative personnel to support our growth and other expenses related to the increase in our sales including activities targeted at increasing the awareness and diagnosis of SDB, as well as an increase in our patent litigation expenses.

 

Research and Development Expenses.    Research and development expenses decreased for the year ended June 30, 2014 to $118.2 million from $120.1 million for the year ended June 30, 2013, a decrease of $1.9 million or 2%. The research and development expenses were favorably impacted by the depreciation of the Australian dollar against the U.S. dollar, which decreased our expenses by approximately $9.0 million, as reported in U.S. dollars. Excluding the impact of foreign currency movements, research and development expenses for the year ended June 30, 2014 increased by 6% compared to the year ended June 30, 2013. As a percentage of net revenue, research and development expenses were 7.6% for the year ended June 30, 2014 compared to 7.9% for the year ended June 30, 2013.

 

The increase in research and development expenses in constant currency terms was primarily due to an increase in the number of research and development personnel, consulting and contractor expenses and an increase in materials and tooling costs incurred to facilitate development of new products.

 

Amortization of Acquired Intangible Assets.    Amortization of acquired intangible assets for the year ended June 30, 2014 totaled $9.7 million compared to $10.1 million for the year ended June 30, 2013.

 

- 40 -


Restructuring expenses.    During the year ended June 30, 2014 we completed a reorganization of our commercial and research and development teams. As a result of this reorganization we terminated the employment of approximately 1% of our employees at a total cost of $6.3 million.

 

Total other income, net.    Total other income, net for the year ended June 30, 2014 was $26.0 million, a decrease of $4.3 million compared with $30.3 million for the year ended June 30, 2013. The decrease in total other income, net, was due primarily to lower interest income resulting from lower interest rates on cash balances held, and the depreciation of the Australian dollar against the U.S. dollar, partially offset by gains on foreign currency transactions.

 

Income Taxes.    Our effective income tax rate decreased to 19.9% for the year ended June 30, 2014 from 20.2% for the year ended June 30, 2013. Our effective income tax rate is affected by the geographic mix of our taxable income, including lower taxes associated with our Singapore and Malaysia manufacturing operations. Our Singapore and Malaysia operations operate under certain tax holidays and tax incentive programs which will expire in whole or in part at various dates through June 30, 2020. As of June 30, 2014, we have not provided for U.S. income taxes for the undistributed earnings of our foreign subsidiaries. We intend these earnings to be permanently reinvested outside the United States.

 

Net Income and Earnings per Share.    As a result of the factors above, our net income for the year ended June 30, 2014 was $345.3 million compared to net income of $307.1 million for the year ended June 30, 2013, an increase of 12% over the year ended June 30, 2013. As a result of the increase in our net income and lower share count due to our stock repurchases, our earnings per share for the year ended June 30, 2014 was $2.39 per diluted share compared to $2.10 per diluted share for the year ended June 30, 2013, an increase of 14% over the year ended June 30, 2013.

 

Fiscal Year Ended June 30, 2013 Compared to Fiscal Year Ended June 30, 2012

 

Net Revenues.    Net revenue increased for the year ended June 30, 2013 to $1,514.5 million from $1,368.5 million for the year ended June 30, 2012, an increase of $145.9 million or 11%. The increase in net revenue was attributable to an increase in unit sales of our flow generators, masks and accessories. Movements in international currencies against the U.S. dollar negatively impacted revenues by approximately $15.1 million for the year ended June 30, 2013. Excluding the impact of unfavorable foreign currency movements, sales for the year ended June 30, 2013 increased by 12% compared to the year ended June 30, 2012.

 

Net revenue in North and Latin America increased for the year ended June 30, 2013 to $851.6 million from $749.0 million for the year ended June 30, 2012, an increase of $102.6 million or 14%. We believe this increase primarily reflected growth in the overall SDB market and market share gains in the APAP and bilevel flow generator segments.

 

Net revenue in markets outside North and Latin America increased for the year ended June 30, 2013 to $662.8 million from $619.5 million for the year ended June 30, 2012, an increase of $43.4 million or 7%. Excluding the impact of unfavorable foreign currency movements, international sales for the year ended June 30, 2013 increased by 9%, compared to the year ended June 30, 2012. We believe this increase in sales outside North and Latin America predominantly reflects growth in the overall SDB market.

 

Net revenue from flow generators for the year ended June 30, 2013 totaled $823.5 million from $736.6 million for the year ended June 30, 2012, an increase of 12%, including increases of 18% in North and Latin America and 7% elsewhere. Net revenue from mask systems, motors and other accessories totaled $690.9 million, an increase of 9%, including increases of 11% in North and Latin

 

- 41 -


America and 7% elsewhere, for the year ended June 30, 2013, compared to the year ended June 30, 2012. We believe these increases primarily reflect growth in the overall SDB market and market share gains in the APAP and bilevel flow generator segments.

 

The following table summarizes the percentage movements in our net revenue for the year ended June 30, 2013 compared to the year ended June 30, 2012:

 

     North and Latin
America
    International     Total     International
(Constant
Currency)*
    Total
(Constant
Currency)*
 

Flow generators

     18 %      7 %      12 %      9 %      13 % 

Masks and other accessories

     11 %      7 %      9 %      10 %      10 % 

Total

     14 %      7 %      11 %      9 %      12 % 

 

* Constant currency numbers exclude the impact of movements in international currencies.

 

Gross Profit.    Gross profit increased for the year ended June 30, 2013 to $940.7 million from $820.7 million for the year ended June 30, 2012, an increase of $119.9 million or 15%. Gross profit as a percentage of net revenue was 62.1% for the year ended June 30, 2013, compared with the 60.0% for the year ended June 30, 2012. The improvement in gross margins was primarily due to cost savings attributable to manufacturing and supply chain improvements, and favorable change in product mix as sales of our higher margin products represented a higher proportion of our sales, partially offset by declines in our average selling prices.

 

Selling, General and Administrative Expenses.    Selling, general and administrative expenses increased for the year ended June 30, 2013 to $430.8 million from $402.6 million for the year ended June 30, 2012, an increase of $28.2 million or 7%. As a percentage of net revenue, selling, general and administrative expenses for the year ended June 30, 2013 was 28%, compared to 29% for the year ended June 30, 2012.

 

The increase in selling, general and administrative expenses was primarily due to an increase in the number of sales and administrative personnel to support our growth and other expenses related to the increase in our sales including activities targeted at increasing the awareness and diagnosis of SDB.

 

Research and Development Expenses.    Research and development expenses increased for the year ended June 30, 2013 to $120.1 million from $109.7 million for the year ended June 30, 2012, an increase of $10.4 million or 9%. As a percentage of net revenue, research and development expenses were 8% for the year ended June 30, 2013 compared to 8% for the year ended June 30, 2012.

 

The increase in research and development expenses was primarily due to an increase in the number of research and development personnel, consulting and contractor expenses and an increase in materials and tooling costs incurred to facilitate development of new products.

 

Education, Research and Settlement Charge.    During the year ended June 30, 2013 we agreed to pay the University of Sydney $24.8 million to establish two perpetual academic chairs, fund future research in the fields of sleep medicine and biomedical engineering, and settle legal proceedings between us. We expensed the full amount of $24.8 million ($17.7 million, net of tax) in the year ended June 30, 2013 within our operating expenses and separately disclosed the amount as an education, research and settlement charge.

 

Amortization of Acquired Intangible Assets.    Amortization of acquired intangible assets for the year ended June 30, 2013 totaled $10.1 million compared to $14.0 million for the year ended June 30, 2012. The reduction in amortization expense was mainly attributable to certain acquired intangibles reaching the end of their useful life and therefore being fully amortized.

 

- 42 -


Total other income, net.    Total other income, net for the year ended June 30, 2013 was $30.3 million, a decrease of $7.2 million compared with $37.5 million for the year ended June 30, 2012. The decrease in total other income, net, was due primarily to losses on foreign currency transactions, partially offset by an increase in interest income, due primarily to an increase in cash balances held.

 

Income Taxes.    Our effective income tax rate decreased to 20.2% for the year ended June 30, 2013 from 23.2% for the year ended June 30, 2012. The lower effective income tax rate was primarily due to a change in the geographic mix of our taxable income, including the lower statutory tax rates and other incentives associated with our Singapore and Malaysia manufacturing operations.

 

Net Income.    As a result of the factors above and share repurchases, our net income and earnings per share for the year ended June 30, 2013 was $307.1 million or $2.10 per diluted share compared to net income of $254.9 million or $1.71 per diluted share for the year ended June 30, 2012, an increase of 21% and 23%, respectively, over the year ended June 30, 2012.

 

Liquidity and Capital Resources

 

As of June 30, 2014 and June 30, 2013, we had cash and cash equivalents of $905.7 million and $876.0 million, respectively. Working capital was $1.3 billion and $874.8 million at June 30, 2014 and June 30, 2013, respectively. The increase in working capital balance is primarily due to the renewal of our long term credit facility.

 

As of June 30, 2014 and June 30, 2013, our cash and cash equivalent balances held within the United States amounted to $29.0 million and $38.2 million, respectively. Our remaining cash and cash equivalent balances at June 30, 2014 and June 30, 2013, of $876.7 million and $837.8 million, respectively, were held by our non-U.S. subsidiaries, indefinitely invested outside the United States. Our cash and cash equivalent balances are held at highly rated financial institutions.

 

As of June 30, 2014, the cumulative amount of undistributed earnings from our foreign subsidiaries was approximately $1.5 billion, and those undistributed earnings are considered permanently reinvested. We intend to reinvest the cash and cash equivalents of those entities whose undistributed earnings are permanently reinvested in our international operations. We reassess our reinvestment assertions each reporting period and currently believe that we have sufficient sources of liquidity to support our assertion that the undistributed earnings held by foreign subsidiaries may be considered to be reinvested permanently. If these earnings had not been permanently reinvested, deferred taxes of approximately $344 million would have been recognized in our consolidated financial statements.

 

We repatriated $191 million and $185 million to the U.S. in fiscal years 2014 and 2013, respectively, from earnings generated in each of those years. The amount of the current year foreign earnings that we have repatriated to the U.S. in the past has been determined, and the amount that we expect to repatriate during fiscal year 2015 will be determined, based on a variety of factors, including current year earnings of our foreign subsidiaries, foreign investment needs and the cash flow needs we have in the U.S., such as for the repayment of debt, dividend distributions, and other domestic obligations. The majority of our repatriation of foreign subsidiaries’ earnings to the U.S. has historically occurred at year-end, although we may repatriate funds earlier in the year based on our business needs. When we repatriate funds to the U.S., we are required to pay taxes in the U.S. on these amounts based on applicable U.S. tax rates, net of any foreign tax that would be allowed to be deducted or taken as a credit against U.S. income tax. We paid $10.7 million and $19.3 million in additional U.S. federal income taxes in fiscal years 2014 and 2013, respectively, as a result of repatriation of foreign earnings generated in those years.

 

Inventories at June 30, 2014 increased by $19.6 million or 13% to $165.4 million compared to June 30, 2013 inventories of $145.8 million. The increase in inventories was due mainly to recent new product introductions and an increase in inventories held to support the increase in unit sales.

 

- 43 -


Accounts receivable, net of allowance for doubtful accounts, at June 30, 2014 were $359.6 million, an increase of $41.2 million or 13% over the June 30, 2013 accounts receivable balance of $318.3 million. Accounts receivable days sales outstanding of 76 days at June 30, 2014 increased by 11 days compared to 65 days at June 30, 2013. The increase in our accounts receivable balance and days sales is mainly due to longer payment terms in our domestic market. Our allowance for doubtful accounts as a percentage of total accounts receivable at June 30, 2014 and 2013 was 3.0% and 3.0%, respectively. The credit quality of our customers remains broadly consistent with our past experience.

 

During the year ended June 30, 2014, we generated cash of $391.3 million from operations. This was slightly lower than the cash generated from operations for the year ended June 30, 2013 of $402.8 million, which was primarily the result of the increase in our inventory balance. Movements in foreign currency exchange rates during the year ended June 30, 2014 had the effect of increasing our cash and cash equivalents by $30.7 million, as reported in U.S. dollars. During fiscal years 2014 and 2013, we repurchased 4.4 million and 4.3 million shares at a cost of $208.1 million and $188.0 million, respectively. During fiscal years 2014 and 2013, we also paid dividends totaling $141.5 million and $97.2 million, respectively.

 

Details of contractual obligations at June 30, 2014 are as follows:

 

          Payments Due by Fiscal Year  
In $000’s   Total     2015     2016     2017     2018     2019     Thereafter  
Long Term Debt   $ 300,788     $ 18     $ -      $ -      $ -      $ 300,000     $ 770  
Interest on Long Term Debt     17,800       4,087       4,087       4,087       4,087       1,387       65  
Operating Leases     58,906       17,293       12,996       8,024       4,242       3,211       13,140  
Purchase Obligations     146,143       146,135       8       -        -        -        -   
Total   $ 523,637     $ 167,533     $ 17,091     $ 12,111     $ 8,329     $ 304,598     $ 13,975  

 

Details of other commercial commitments at June 30, 2014 are as follows:

 

            Amount of Commitment Expiration Per Fiscal Year  
In $000’s    Total      2015      2016      2017      2018      2019      Thereafter  

Guarantees*

   $ 13,683      $ 2,087      $ 36      $ 1,821      $ -       $ 2      $ 9,737  

Other

     47        -         -         -         -         -         47  

Total

   $ 13,730      $ 2,087      $ 36      $ 1,821      $ -       $ 2      $ 9,784  

 

*The above guarantees mainly relate to requirements under contractual obligations with insurance companies transacting with our German subsidiaries and guarantees provided under our facility leasing obligations.

 

Credit Facility

 

On October 31, 2013, we entered into a credit agreement, as borrower, with lenders, including Union Bank, N.A., as administrative agent, joint lead arranger, swing line lender and letters of credit issuer, and HSBC Bank USA, National Association, as syndication agent and joint lead arranger. Our obligations under the credit agreement are guaranteed by ResMed Corp. and ResMed Motor Technologies Inc., two of our U.S. subsidiaries.

 

The credit agreement provides a $700 million senior unsecured five-year revolving credit facility, with an uncommitted option to increase the credit facility by an additional $300 million. The credit facility also includes a $25 million sublimit for letters of credit. The credit facility terminates on October 31, 2018, when all unpaid principal and interest under the loans must be repaid. The outstanding principal amount due under the credit facility will bear interest at a rate equal to LIBOR

 

- 44 -


plus 1.0% to 2.0% (depending on the then-applicable leverage ratio). At June 30, 2014, the interest rate that was being charged on the outstanding principal amount was 1.2%. An applicable commitment fee of 0.15% to 0.25% (depending on the then-applicable leverage ratio) applies on the unused portion of the credit facility.

 

When we entered into the credit agreement, we used a portion of the proceeds from the initial funding of the credit facility to repay the outstanding balance under our previous revolving credit facility with Union Bank, N.A and other lenders. On that repayment, the previous credit agreement, dated as of February 10, 2011, between us and lenders (including Union Bank, N.A., as administrative agent, swing line lender and L/C Issuer, HSBC Bank USA, National Association, as syndication agent and Union Bank, N.A., HSBC Bank USA, National Association, Commonwealth Bank of Australia and Wells Fargo Bank), was terminated and the commitments under the previous credit agreement were also terminated.

 

Our obligations under the current credit agreement are unsecured but are guaranteed by two of our U.S. subsidiaries. The credit agreement contains customary covenants, including certain financial covenants and an obligation that we maintain certain financial ratios, including a maximum leverage ratio of funded debt to EBITDA (as defined in the credit agreement) and an interest coverage ratio. The entire principal amount of the credit facility and any accrued but unpaid interest may be declared immediately due and payable if an event of default occurs, as defined in the credit agreement. Events of default under the credit agreement include failure to make payments when due, the occurrence of a default in the performance of any covenants in the credit agreement or related documents, or certain changes of control of ResMed Inc., ResMed Corp., ResMed Motor Technologies Inc., ResMed Limited, ResMed Holdings Ltd/LLC or ResMed EAP Holdings LLC.

 

At June 30, 2014, we were in compliance with our debt covenants and there was $300.0 million outstanding under the credit agreement.

 

We expect to satisfy all of our liquidity requirements through a combination of cash on hand, cash generated from operations and debt facilities.

 

Tax Expense

 

Our income tax rate is governed by the laws of the regions in which our income is recognized. To date, a substantial portion of our income has been subject to income tax in Australia where the statutory rate was 30% in fiscal years 2014, 2013 and 2012. During fiscal years 2014, 2013 and 2012, our consolidated effective tax rate has fluctuated between approximately 20% and approximately 23%. These fluctuations have resulted from, and future effective tax rates will depend on, numerous factors, including the amount of research and development expenditures for which an additional Australian tax credit is available, the level of foreign earnings repatriated to the U.S., the geographic mix of taxable income and other tax credits or benefits available to us under applicable tax laws, including the lower statutory tax rates and other incentives associated with our Singapore and Malaysia manufacturing operations.

 

Critical Accounting Principles and Estimates

 

The preparation of financial statements in conformity with accounting principles generally accepted in the United States requires us to make estimates and judgments that affect our reported amounts of assets and liabilities, revenues and expenses and related disclosures of contingent assets and liabilities. We evaluate our estimates on an ongoing basis, including those estimates related to allowance for doubtful accounts, inventory adjustments, warranty obligations, goodwill, impaired assets, intangible assets, income taxes, deferred tax valuation allowances and stock-based compensation costs.

 

- 45 -


We state these accounting policies in the Notes to the consolidated financial statements and at relevant sections in this discussion and analysis. The estimates are based on the information that is currently available to us and on various other assumptions that we believe to be reasonable under the circumstances. Actual results could vary from those estimates under different assumptions or conditions.

 

We believe that the following critical accounting policies affect the more significant judgments and estimates used in the preparation of our consolidated financial statements:

 

(1)    Allowance for Doubtful Accounts. We maintain an allowance for doubtful accounts for estimated losses resulting from the inability of our customers to make required payments, which results in bad debt expense. We determine the adequacy of this allowance by periodically evaluating individual customer receivables, considering a customer’s financial condition, credit history and current economic conditions. If the financial condition of our customers were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances may be required.

 

(2)    Inventory Adjustments. Inventories are stated at lower of cost or market and are determined by the first-in, first-out method. We review the components of inventory on a regular basis for excess, obsolete and impaired inventory based on estimated future usage and sales. The likelihood of any material inventory write-downs depends on changes in competitive conditions, new product introductions by us or our competitors, or rapid changes in customer demand.

 

(3)    Valuation of Goodwill, Intangible and Other Long-Lived Assets. We make assumptions in establishing the carrying value, fair value and estimated lives of our goodwill, intangibles and other long-lived assets. The criteria used for these evaluations include management’s estimate of the asset’s continuing ability to generate positive income from operations and positive cash flow in future periods compared to the carrying value of the asset, as well as the strategic significance of any identifiable intangible asset in our business objectives. If assets are considered to be impaired, we recognize as impairment the amount by which the carrying value of the assets exceeds their fair value. We base useful lives and related amortization or depreciation expense on our estimate of the period that the assets will generate revenues or otherwise be used by us. Factors that would influence the likelihood of a material change in our reported results include significant changes in the asset’s ability to generate positive cash flow, loss of legal ownership or title to the asset, a significant decline in the economic and competitive environment on which the asset depends, significant changes in our strategic business objectives, utilization of the asset, and a significant change in the economic and/or political conditions in certain countries.

 

We conducted our annual review for goodwill impairment during the final quarter of fiscal 2014 using a quantitative assessment. The results of our annual review indicated that no impaired goodwill exists as the fair value for each reporting unit significantly exceeded its carrying value.

 

(4)    Income Tax. We assess our income tax positions and record tax benefits for all years subject to examination based upon management’s evaluation of the facts, circumstances, and information available at the reporting date. Where we determine that it is not more likely than not that we would be able to realize all or part of our net deferred tax assets in the future, an adjustment to the deferred tax assets would be charged to income tax expense in the period such determination is made. Likewise, if we later determine that it is more likely than not that the net deferred tax assets would be realized, the previously provided valuation allowance would be reversed. These changes to the valuation allowance, and resulting increases or decreases in income tax expense, could have a material effect on our operating results.

 

Our income tax returns are based on calculations and assumptions that are subject to examination by various tax authorities. In addition, the calculation of our tax liabilities involves dealing with

 

- 46 -


uncertainties in the application of complex tax laws. Although currently immaterial, we recognize liabilities for uncertain tax positions based on a two-step process. The first step is to evaluate the tax position for recognition by determining if the weight of available evidence indicates that it is more likely than not that the position will be sustained on audit, including resolution of related appeals or litigation processes, if any. The second step is to measure the tax benefit as the largest amount that is more than 50% likely of being realized upon settlement. While we believe we have appropriate support for the positions taken on our tax returns, we regularly assess the potential outcomes of examinations by tax authorities in determining the adequacy of our provision for income taxes, and adjust the income tax provision, income taxes payable and deferred taxes in the period in which the facts that give rise to a revision become known.

 

(5)    Provision for Warranty. We provide for the estimated cost of product warranties at the time the related revenue is recognized. We determine the amount of this provision by using a financial model, which takes into consideration actual historical expenses and potential risks associated with our different products. We use this financial model to calculate the future probable expenses related to warranty and the required level of the warranty provision. Although we engage in product improvement programs and processes, our warranty obligation is affected by product failure rates and costs incurred to correct those product failures. Should actual product failure rates or estimated costs to repair those product failures differ from our estimates, we would be required to revise our estimated warranty provision.

 

(6)    Revenue Recognition. We generally record revenue on product sales at the time of shipment, which is when title transfers to the customer. We initially defer service revenue received in advance from service contracts and recognize that deferred revenue ratably over the life of the service contract. We initially defer revenue we receive in advance from rental unit contracts and recognize that deferred revenue ratably over the life of the rental contract. Otherwise, we recognize revenue from rental unit contracts ratably over the life of the rental contract. We include in revenue freight charges we bill to customers. We charge all freight-related expenses to cost of sales. Taxes assessed by government authorities that are imposed on and concurrent with revenue-producing transactions, such as sales and value added taxes, are excluded from revenue.

 

We do not normally offer a right of return or other recourse with respect to the sale of our products, other than returns for product defects or other warranty claims. We do not recognize revenues if we offer a right of return or variable sale prices for subsequent events or activities. However, as part of our sales processes we may provide upfront discounts for large orders, one-time special pricing to support new product introductions, sales rebates for centralized purchasing entities or price-breaks for regular order volumes. We record the costs of all such programs as an adjustment to revenue. Our products are predominantly therapy-based equipment and require no installation. Therefore, we have no significant installation obligations.

 

(7)    Stock-Based Compensation. We measure the compensation cost of all stock-based awards at fair value on the date of grant. We recognize that value as compensation expense over the service period, net of estimated forfeitures. We estimate the fair value of employee stock options and purchase rights granted using a Black-Scholes valuation model. The fair value of an award is affected by our stock price on the date of grant as well as other assumptions including the estimated volatility of our stock price over the term of the awards, the expected dividend per share and the expected life of the awards. The risk-free interest rate assumption we use is based upon the U.S. Treasury yield curve at the time of grant appropriate for the expected life of the awards. Expected volatilities are based on a combination of historical volatilities of our stock and the implied volatilities from tradeable options of our stock corresponding to the expected term of the options. We use a combination of the historic and implied volatilities as the addition of the implied volatility is more representative of our future stock price trends. While there is a tradeable market of options on our common stock, less emphasis is

 

- 47 -


placed on the implied volatility of these options due to the relative low volumes of these traded options and the difference in the terms compared to our employee options. In order to determine the estimated period of time that we expect employees to hold their stock options, we use historical rates by employee groups. The estimation of stock awards that will ultimately vest requires judgment, and to the extent actual results differ from our estimates, such amounts will be recorded as a cumulative adjustment in the period estimates are revised. The aforementioned inputs entered into the Black-Scholes valuation model we use to fair value our stock awards are subjective estimates and changes to these estimates will cause the fair value of our stock awards and related stock-based compensation expense we record to vary.

 

We estimate the fair value of restricted stock units based on the market value of the underlying shares as determined at the grant date less the fair value of dividends that holders are not entitled to, during the vesting period. We estimate the weighted average grant date fair value of performance restricted stock units, or PRSUs, which contain a market condition, using a Monte-Carlo simulation valuation model.

 

Recently Issued Accounting Pronouncements

 

See Note 3 – New Accounting Pronouncements to the consolidated financial statements for a description of recently issued accounting pronouncements, including the expected dates of adoption and estimated effects on our results of operations, financial positions and cash flows.

 

Off-Balance Sheet Arrangements

 

As of June 30, 2014, we are not involved in any significant off-balance sheet arrangements, as defined in Item 303(a)(4)(ii) of Regulation S-K promulgated by the SEC.

 

ITEM 7A QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET AND BUSINESS RISKS

 

Foreign Currency Market Risk

 

Our reporting currency is the U.S. dollar, although the financial statements of our non-U.S. subsidiaries are maintained in their respective local currencies. We transact business in various foreign currencies, including a number of major European currencies as well as the Australian dollar. We have significant foreign currency exposure through both our Australian and Singapore manufacturing activities and international sales operations. We have established a foreign currency hedging program using purchased currency options and forward contracts to hedge foreign-currency-denominated financial assets, liabilities and manufacturing cash flows. The goal of this hedging program is to economically manage the financial impact of foreign currency exposures predominantly denominated in euros, Australian dollars and Singapore dollars. Under this program, increases or decreases in our foreign-currency-denominated financial assets, liabilities, and firm commitments are partially offset by gains and losses on the hedging instruments. We do not enter into financial instruments for trading or speculative purposes. The foreign currency derivatives portfolio is recorded in the consolidated balance sheets at fair value and included in other assets or other liabilities. All movements in the fair value of the foreign currency derivatives are recorded within other income, net, on our consolidated statements of income.

 

- 48 -


The table below provides information (in U.S. dollars) on our significant foreign-currency-denominated financial assets by legal entity functional currency as of June 30, 2014 (in thousands):

 

   

Australian

Dollar

(AUD)

   

U.S.

Dollar

(USD)

   

Euro

(EUR)

   

Singapore

Dollar

(SGD)

   

Canadian

Dollar

(CAD)

   

Great
Britain

Pound

(GBP)

   

Malaysian

Ringgit

(MYR)

 

AUD Functional:

                                                       

Assets

    -        203,623        155,437        -        -        -        3,111   

Liability

    -        (58,278 )      (52,241 )      (1,333 )      (9,595 )      (5,223 )      -   
   

Foreign Currency Hedges

    -        (161,865 )      (54,770 )      -        -        5,134        -   
               

Net Total

    -        (16,520 )      48,426        (1,333 )      (9,595 )      (89 )      3,111   

USD Functional:

                                                       

Assets

    -        -        -        -        14,305        -        -   

Liability

    -        -        (479 )      -        -        -        -   
   

Foreign Currency Hedges

    -        -        -        -        -        -        -   
               

Net Total

    -        -        (479 )      -        14,305        -        -   

EURO Functional:

                                                       

Assets

    9        531        -        -        -        3,399        -   

Liability

    (2 )      (4,145 )      -        -        -        (51 )      -   
   

Foreign Currency Hedges

    -        -        -        -        -        (3,423 )      -   
               

Net Total

    7        (3,614 )      -        -        -        (75 )      -   

GBP Functional:

                                                       

Assets

    -        -        6,373        -        -        -        -   

Liability

    -        (351 )      -        -        -        -        -   
   

Foreign Currency Hedges

    -        -        -        -        -        -        -   
               

Net Total

    -        (351 )      6,373        -        -        -        -   

SGD Functional:

                                                       

Assets

    1,542        130,280        58,028        -        -        -        -   

Liability

    (3,732 )      (96,417 )      (44,773 )      -        -        -        -   
   

Foreign Currency Hedges

    -        (40,000 )      (20,539 )      -        -        -        -   
               

Net Total

    (2,190 )      (6,137 )      (7,284 )      -        -        -        -   

SEK Functional:

                                                       

Assets

    -        -        3,943        -        -        -        -   

Liability

    -        (120 )      (652 )      -        -        -        -   
   

Foreign Currency Hedges

    -        -        -        -        -        -        -   
               

Net Total

    -        (120 )      3,291        -        -        -        -   

MYR Functional:

                                                       

Assets

    -        2,269        11        -        -        -        -   

Liability

    (66 )      (1,046 )      -        (3 )      -        -        -   
   

Foreign Currency Hedges

    -        -        -        -        -        -        -   
               

Net Total

    (66 )      1,223        11        (3 )      -        -        -   

 

- 49 -


The table below provides information about our foreign currency derivative financial instruments and presents the information in U.S. dollar equivalents. The table summarizes information on instruments and transactions that are sensitive to foreign currency exchange rates, including foreign currency call options, collars and forward contracts held at June 30, 2014. The table presents the notional amounts and weighted average exchange rates by contractual maturity dates for our foreign currency derivative financial instruments. These notional amounts generally are used to calculate payments to be exchanged under the options contracts (in thousands, except exchange rates):

 

Foreign Exchange

Contracts

                 

Fair Value

Assets /

(Liabilities)

  FY 2015   FY 2016   FY 2017   Total   June 30,
2014
  June 30,
2013

Receive AUD/Pay USD

                       

Contract amount

  172,000   -   -   172,000   328   (822)

Ave. contractual
exchange rate

  AUD 1 = USD 0.9412           AUD 1 = USD 0.9412        

Receive AUD/Pay Euro

                       

Contract amount

  178,000   55,000   -   233,000   (2,574)   (6,985)

Ave. contractual
exchange rate

  AUD 1 = Euro 0.7686   AUD 1 = Euro 0.7295       AUD 1 = Euro 0. 7590        

Receive SGD/Pay Euro

                       

Contract amount

  21,000   -   -   21,000   (90)   501

Ave. contractual
exchange rate

  SGD 1 = Euro 0. 5883           SGD 1 = Euro 0. 5982        

Receive AUD/Pay SGD

                       

Contract amount

  -   -   -   -   -   (193)

Ave. contractual
exchange rate

                       

Receive SGD/Pay USD

                       

Contract amount

  40,000   -   -   40,000   59   284

Ave. contractual
exchange rate

  SGD 1 = USD 0.8008           SGD 1 = USD 0.7938        

Receive GBP/Pay AUD

                       

Contract amount

  5,000   -   -   5,000   18   -

Ave. contractual
exchange rate

  GBP 1 = AUD 0.5492           GBP 1 = AUD 0.5492        

Receive EUR/Pay GBP

                       

Contract amount

  3,000   -   -   3,000   (11)   -

Ave. contractual
exchange rate

  EUR 1 = GBP 0.8027           EUR 1 = GBP 0.8027        

Receive USD/Pay CAD

                       

Contract amount

  -   -   -   -   -   215

Ave. contractual
exchange rate

                       

 

Interest Rate Risk

 

We are exposed to risk associated with changes in interest rates affecting the return on our cash and cash equivalents and debt. At June 30, 2014, we maintained cash and cash equivalents of $905.7 million principally comprised of bank term deposits and at call accounts and are invested at both short-term fixed interest rates and variable interest rates. At June 30, 2014, we had total long-term debt, including the current portion of those obligations, of $300.8 million of which, $300.0 million is subject to variable interest rates. A hypothetical 10% change in interest rates during the year ended June 30, 2014, would not have had a material impact on pretax income. We have no interest rate hedging agreements.

 

- 50 -


ITEM 8 CONSOLIDATED FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

 

The information required by this Item is incorporated by reference to the financial statements set forth in Item 15 of Part IV of this report, “Exhibits and Consolidated Financial Statement Schedules.”

 

  a) Index to Consolidated Financial Statements

 

Report of Independent Registered Public Accounting Firm

     F1   

Consolidated Balance Sheets as of June 30, 2014 and 2013

     F2   

Consolidated Statements of Income for the years ended June 30, 2014, 2013 and 2012

     F3   

Consolidated Statements of Comprehensive Income for the years ended June 30, 2014, 2013 and 2012

     F4   

Consolidated Statements of Stockholders’ Equity for the years ended June 30, 2014, 2013 and 2012

     F5   

Consolidated Statements of Cash Flows for the years ended June 30, 2014, 2013 and 2012

     F6   

Notes to Consolidated Financial Statements

     F7   

Schedule II – Valuation and Qualifying Accounts and Reserves

        

 

  b) Supplementary Data

 

Quarterly Financial Information (unaudited) – The quarterly results for the years ended June 30, 2014 and 2012 are summarized below (in thousands, except per share amounts):

 

2014    First
Quarter
     Second
Quarter
     Third
Quarter
     Fourth
Quarter
     Fiscal Year  

Net revenues

   $ 357,662       $ 384,341       $ 397,758       $ 415,211       $ 1,554,973   

Gross profit

     227,982         248,759         251,788         261,258         989,786   

Net income

     80,930         86,636         89,969         87,738         345,273   
   

Basic earnings per share

     0.57         0.61         0.64         0.62         2.44   

Diluted earnings per share

     0.56         0.60         0.63         0.61         2.39   
2013    First
Quarter
     Second
Quarter
     Third
Quarter
     Fourth
Quarter
     Fiscal Year  

Net revenues

   $ 339,731       $ 376,538       $ 383,581       $ 414,607       $ 1,514,457   

Gross profit

     208,648         232,712         239,449         259,848         940,657   

Net income

     71,265         77,942         84,913         73,013         307,133   
   

Basic earnings per share

     0.50         0.54         0.59         0.51         2.15   

Diluted earnings per share

     0.49         0.53         0.58         0.50         2.10   

Note: the amounts for each quarter are computed independently, and, due to the computation formula, the sum of the four quarters may not equal the year.

 

ITEM 9 CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

 

None.

 

ITEM 9A CONTROLS AND PROCEDURES

 

We maintain disclosure controls and procedures that are designed to ensure that information required to be disclosed in our Exchange Act reports is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange CommissionÂ’s rules and forms and that such information is accumulated and communicated to our management, including our chief executive officer and chief financial officer, as appropriate, to allow for timely decisions regarding required disclosure. In designing and evaluating the disclosure controls and procedures, management

 

- 51 -


recognizes that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving the desired control objectives, and management is required to apply its judgment in evaluating the cost-benefit relationship of possible controls and procedures.

 

As required by SEC Rule 13a-15(b), we carried out an evaluation, under the supervision and with the participation of our management, including our chief executive officer and chief financial officer, of the effectiveness of the design and operation of our disclosure controls and procedures as of June 30, 2014. Based on the foregoing, our chief executive officer and chief financial officer concluded that our disclosure controls and procedures were effective at the reasonable assurance level as of June 30, 2014.

 

There has been no change in our internal controls over financial reporting during our most recent fiscal quarter that has materially affected, or is reasonably likely to materially affect, our internal controls over financial reporting.

 

- 52 -


MANAGEMENTÂ’S REPORT ON INTERNAL CONTROL OVER FINANCIAL REPORTING

 

Our management is responsible for establishing and maintaining adequate internal control over financial reporting as defined in Rules 13a-15(f) and 15d-15(f) under the Securities Exchange Act of 1934. Our internal control over financial reporting is designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles in the United States of America. Our internal control over financial reporting includes those policies and procedures that:

 

  (i) Pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of our assets;

 

  (ii) Provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that our receipts and expenditures are being made only in accordance with authorizations of our management and directors; and

 

  (iii) Provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of our assets that could have a material effect on the financial statements.

 

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

 

Management assessed the effectiveness of our internal control over financial reporting as of June 30, 2014. Management based this assessment on criteria for effective internal control over financial reporting described in “Internal Control – Integrated Framework” issued by the Committee of Sponsoring Organizations of the Treadway Commission’s (1992) framework. Management’s assessment included an evaluation of the design of our internal control over financial reporting and testing of the operational effectiveness of its internal control over financial reporting. Management reviewed the results of its assessment with the audit committee of our board of directors.

 

Based on our assessment and those criteria, management has concluded that we maintained effective internal control over financial reporting as of June 30, 2014.

 

KPMG LLP, independent registered public accounting firm, who audited and reported on the consolidated financial statements of ResMed, Inc. included in this report, has issued an attestation report on the effectiveness of internal control over financial reporting.

 

- 53 -


REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

 

The Board of Directors and Stockholders

ResMed Inc.:

 

We have audited the internal control over financial reporting of ResMed Inc. as of June 30, 2014, based on criteria established in Internal Control – Integrated Framework (1992) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). The management of ResMed Inc. is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the internal control over financial reporting of ResMed Inc. based on our audit.

 

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audit also included performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

 

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

 

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

 

In our opinion, ResMed Inc. maintained, in all material respects, effective internal control over financial reporting as of June 30, 2014, based on criteria established in Internal Control – Integrated Framework (1992) issued by COSO.

 

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of ResMed Inc. and subsidiaries as of June 30, 2014 and 2013, and the related consolidated statements of income, comprehensive income, stockholders’ equity, and cash flows for each of the years in the three-year period ended June 30, 2014, and the related financial statement schedule, and our report dated August 8, 2014 expressed an unqualified opinion on those consolidated financial statements and financial statement schedule.

 

/s/    KPMG LLP


San Diego, California
August 8, 2014

 

ITEM 9B OTHER INFORMATION

 

None.

 

- 54 -



PART III


 

ITEM 10 DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

 

Information required by this Item is incorporated by reference from our definitive proxy statement for our November 20, 2014, annual meeting of stockholders, which will be filed with the Securities and Exchange Commission within 120 days after June 30, 2014.

 

We have filed as exhibits to this annual report on Form 10-K for the year ended June 30, 2014, the certifications of our chief executive officer and chief financial officer required by Section 302 of the Sarbanes-Oxley Act of 2002.

 

ITEM 11 EXECUTIVE COMPENSATION

 

Information required by this Item is incorporated by reference from our definitive proxy statement for our November 20, 2014, annual meeting of stockholders, which will be filed with the Securities and Exchange Commission within 120 days after June 30, 2014.

 

ITEM 12 SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

 

Information required by this Item is incorporated by reference from our definitive proxy statement for our November 20, 2014, annual meeting of stockholders, which will be filed with the Securities and Exchange Commission within 120 days after June 30, 2014.

 

ITEM 13 CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

 

Information required by this Item is incorporated by reference from our definitive proxy statement for our November 20, 2014, annual meeting of stockholders, which will be filed with the Securities and Exchange Commission within 120 days after June 30, 2014.

 

ITEM 14 PRINCIPAL ACCOUNTING FEES AND SERVICES

 

Information required by this Item is incorporated by reference from our definitive proxy statement for our November 20, 2014, annual meeting of stockholders, which will be filed with the Securities and Exchange Commission within 120 days after June 30, 2014.

 

- 55 -



PART IV


 

ITEM 15 EXHIBITS AND CONSOLIDATED FINANCIAL STATEMENT SCHEDULES

 

The following documents are filed as part of this report:

 

(a)    Consolidated Financial Statements and Schedules – The index to our consolidated financial statements and schedules are set forth in the “Index to Consolidated Financial Statements” under Item 8 of this report.
(b)    Exhibit Lists
3.1    First Restated Certificate of Incorporation of ResMed Inc., as amended. (16)
3.2    Fifth Amended and Restated Bylaws of ResMed Inc. (13)
4.1    Form of certificate evidencing shares of Common Stock. (1)
10.1    Licensing Agreement between the University of Sydney and ResMed Ltd dated May 17, 1991, as amended. (1)
10.2*    ResMed Inc. 2006 Incentive Award Plan. (6)
10.3*    Amendment No. 1 to the ResMed Inc. 2006 Incentive Award Plan. (3)
10.4*    2006 Grant agreement for Board of Directors. (3)
10.5*    2006 Grant agreement for Executive Officers. (5)
10.6*    2006 Grant agreement for Australian Executive Officers. (5)
10.7*    Form of Executive Agreement. (4)
10.8*    Amended and Restated 2006 Incentive Award Plan dated November 20, 2008. (7)
10.9    Form of Indemnification Agreements for our directors and officers. (8)
10.10    Form of Access Agreement for directors. (8)
10.11*    Updated Form of Executive Agreement. (2) (12)
10.12    ResMed Inc. 2009 Incentive Award Plan. (9)
10.13    ResMed Inc. 2009 Employee Stock Purchase Plan. (9)
10.14    Amendment No. 1 to the ResMed Inc. 2009 Employee Stock Purchase Plan (14)
10.15    Form of Restricted Stock Award Agreement. (9)
10.16    ResMed Inc. Deferred Compensation Plan. (10)
10.17    Credit Agreement, dated as of October 31, 2013, among ResMed Inc., the lenders Union Bank, N.A., as administrative agent, joint lead arranger, swing line lender and letters of credit issuer and HSBC Bank USA, National Association, as syndication agent and joint lead arranger. (17)
10.18    Unconditional Guaranty entered into as of October 31, 2013, by each of ResMed Corp. and ResMed Motor Technologies Inc., in favor of Union Bank, N.A., as administrative agent. (17)
10.19    Form of Restricted Stock Unit Award Agreement for Executive Officers. (11)
10.20    Form of Restricted Stock Unit Award Agreement for Directors. (11)

 

- 56 -


10.21    Form of Stock Option Grant for Executive Officers. (11)
10.22    Form of Stock Option Grant for Directors. (11)
10.23    Form of Performance-Based Restricted Stock Unit Award Agreement for Executive Officers.(15)
21.1    Subsidiaries of the Registrant. (18)
23.1    Consent of Independent Registered Public Accounting Firm. (18)
31.1    Certification of Chief Executive Officer Pursuant to Section 302 of Sarbanes-Oxley Act of 2002. (18)
31.2    Certification of Chief Financial Officer Pursuant to Section 302 of Sarbanes-Oxley Act of 2002. (18)
32.1    Certification of Chief Executive Officer and Chief Financial Officer pursuant to Section 906 of the Sarbanes-Oxley Act of 2002. (18)
101   

The following materials from ResMed Inc.’s Annual Report on Form 10-K for the fiscal year ended June 30, 2014 formatted in Extensible Business Reporting Language (XBRL): (i) the Consolidated Balance Sheets, (ii) the Consolidated Statements of Income, (iii) the Consolidated Statements of Stockholders’ Equity and Comprehensive Income, (iv) the Consolidated and Statements of Cash Flows and (v) related notes.

 

* Management contract or compensatory plan or arrangement

(1) Incorporated by reference to the Registrant’s Registration Statement on Form S-1 (No. 33-91094) declared effective on June 1, 1995.

(2) Incorporated by reference to the Registrant’s Report on Form 10-K for the year ended June 30, 2009.

(3) Incorporated by reference to the Registrant’s Report on Form 10-Q for the quarter ended December 31, 2006.

(4) Incorporated by reference to the Registrant’s Report on Form 8-K filed on July 13, 2007.

(5) Incorporated by reference to the Registrant’s Report on Form 10-K for the year ended June 30, 2007.

(6) Incorporated by reference to the Registrant’s Report on Form 8-K filed on November 15, 2006.

(7) Incorporated by reference to Appendix A of the Registrant’s Definitive Proxy Statement filed on October 15, 2008.

(8) Incorporated by reference to the Registrant’s Report on Form 8-K filed on June 24, 2009.

(9) Incorporated by reference to the Registrant’s Report on Form 8-K filed on November 23, 2009.

(10) Incorporated by reference to the Registrant’s Report on Form 8-K filed on May 25, 2010.

(11) Incorporated by reference to the Registrant’s Report on Form 10-Q for the quarter ended September 30, 2011.

(12) Incorporated by reference to the Registrant’s Report on Form 8-K filed on July 2, 2012.

(13) Incorporated by reference to the Registrant’s Report on Form 8-K/A filed on September 17, 2012.

(14) Incorporated by reference to Appendix A of the Registrant’s Definitive Proxy Statement filed on October 4, 2012.

(15) Incorporated by reference to the Registrant’s Report on Form 8-K filed on November 21, 2012.

(16) Incorporated by reference to Exhibit 3.1 to the Registrant’s Report on Form 10-Q for the quarter ended September 30, 2013

(17) Incorporated by reference to Exhibits 10.1 and 10.2 to the Registrant’s Report on Form 8-K filed on November 5, 2013

(18) Filed with this report.

 

- 57 -


REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

 

The Board of Directors and Stockholders

ResMed Inc.:

 

We have audited the accompanying consolidated balance sheets of ResMed Inc. and subsidiaries (the Company) as of June 30, 2014 and 2013, and the related consolidated statements of income, comprehensive income, stockholders’ equity, and cash flows for each of the years in the three-year period ended June 30, 2014. In connection with our audits of the consolidated financial statements, we also have audited financial statement schedule II. These consolidated financial statements and financial statement schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements and financial statement schedule based on our audits.

 

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

 

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of ResMed Inc. and subsidiaries as of June 30, 2014 and 2013, and the results of their operations and their cash flows for each of the years in the three-year period ended June 30, 2014, in conformity with U.S. generally accepted accounting principles. Also in our opinion, the related financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.

 

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the Company’s internal control over financial reporting as of June 30, 2014, based on criteria established in Internal Control—Integrated Framework (1992) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO), and our report dated August 8, 2014, expressed an unqualified opinion on the effectiveness of the internal control over financial reporting of ResMed Inc.

 

/s/ KPMG LLP


San Diego, California

August 8, 2014

 

- F1 -


RESMED INC. AND SUBSIDIARIES

Consolidated Balance Sheets

June 30, 2014 and 2013

(In thousands, except share and per share data)

 

     June 30,
2014


    June 30,
2013


 

Assets

                

Current assets:

                

Cash and cash equivalents

   $ 905,730     $ 876,048  

Accounts receivable, net of allowance for doubtful accounts of $10,971 and $9,912 at June 30, 2014 and June 30, 2013, respectively

     359,593       318,349  

Inventories (note 5)

     165,418       145,847  

Deferred income taxes (note 14)

     31,908       38,552  

Income taxes receivable

     14,853       8,910  

Prepaid expenses and other current assets

     78,707       61,143  
    


Total current assets

     1,556,209       1,448,849  

Non-current assets:

                

Property, plant and equipment, net (note 6)

     434,277       411,433  

Goodwill and other intangible assets, net (note 7)

     334,510       324,468  

Deferred income taxes (note 14)

     18,755       20,053  

Other assets

     17,211       5,918  
    


Total non-current assets

     804,753       761,872  
    


Total assets

   $ 2,360,962     $ 2,210,721  
    


Liabilities and StockholdersÂ’ Equity

                

Current liabilities:

                

Accounts payable

   $ 85,405     $ 60,688  

Accrued expenses (note 9)

     130,656       137,674  

Deferred revenue

     42,370       44,953  

Income taxes payable

     10,392       30,090  

Deferred income taxes (note 14)

     717       627  

Current portion of long-term debt (note 11)

     18       300,017  
    


Total current liabilities

     269,558       574,049  

Non-current liabilities:

                

Deferred income taxes (note 14)

     10,716       9,895  

Deferred revenue

     16,352       11,928  

Long-term debt (note 11)

     300,770       769  

Income taxes payable

     5,318       3,564  
    


Total non-current liabilities

     333,156       26,156  
    


Total liabilities

     602,714       600,205  
    


Commitments and contingencies (notes 18 and 19)

                

StockholdersÂ’ equity: (note 12)

                

Preferred stock, $0.01 par value, 2,000,000 shares authorized; none issued

     -        -   

Common stock, $0.004 par value, 350,000,000 shares authorized; 176,747,039 issued and 140,304,544 outstanding at June 30, 2014 and 174,038,766 issued and 142,013,753 outstanding at June 30, 2013

     561       568  

Additional paid-in capital

     1,117,644       1,025,064  

Retained earnings

     1,780,396       1,576,641  

Treasury stock, at cost, 36,442,495 shares at June 30, 2014, and 32,026,013 shares at June 30, 2013

     (1,291,910 )      (1,083,845 ) 

Accumulated other comprehensive income

     151,557       92,088  
    


Total stockholdersÂ’ equity

     1,758,248       1,610,516  
    


Total liabilities and stockholdersÂ’ equity

   $ 2,360,962     $ 2,210,721  
    


 

See accompanying notes to consolidated financial statements.

 

- F2 -


RESMED INC. AND SUBSIDIARIES

Consolidated Statements of Income

Years Ended June 30, 2014, 2013 and 2012

(In thousands, except per share data)

 

     June 30,
2014


    June 30,
2013


    June 30,
2012


 

Net revenue

   $ 1,554,973     $ 1,514,457     $ 1,368,515  

Cost of sales

     565,187       573,800       547,780  
    


Gross profit

     989,786       940,657       820,735  
    


Operating expenses:

                        

Selling, general and administrative

     450,414       430,802       402,621  

Research and development

     118,226       120,124       109,733  

Restructuring expenses (note 23)

     6,326       -        -   

Education, research and settlement charge (note 23)

     -        24,765       -   

Amortization of acquired intangible assets

     9,733       10,142       13,974  
    


Total operating expenses

     584,699       585,833       526,328  
    


Income from operations

     405,087       354,824       294,407  
    


Other income, net:

                        

Interest income

     31,236       38,873       33,866  

Interest expense

     (6,129 )      (6,387 )      (4,786 ) 

Other, net (note 13)

     884       (2,191 )      8,458  
    


Total other income, net

     25,991       30,295       37,538  
    


Income before income taxes

     431,078       385,119       331,945  

Income taxes (note 14)

     85,805       77,986       77,095  
    


Net income

   $ 345,273     $ 307,133     $ 254,850  
    


Basic earnings per share

   $ 2.44     $ 2.15     $ 1.75  

Diluted earnings per share (note 4)

   $ 2.39     $ 2.10     $ 1.71  

Dividend declared per share

   $ 1.00     $ 0.68     $ -   

Basic shares outstanding (000Â’s)

     141,474       142,954       145,901  

Diluted shares outstanding (000Â’s)

     144,359       146,410       149,316  

 

See accompanying notes to consolidated financial statements.

 

- F3 -


RESMED INC. AND SUBSIDIARIES

Consolidated Statements of Comprehensive Income

Years Ended June 30, 2014, 2013 and 2012

(In US$ thousands)

 

     Years Ended June 30,

 
     2014

     2013

    2012

 

Net income

   $ 345,273      $ 307,133     $ 254,850  

Other comprehensive income (loss):

                         

Foreign currency translation gain (loss) adjustments

     59,469        (144,368 )      (87,976 ) 
    


Comprehensive income

   $ 404,742      $ 162,765     $ 166,874  
    


 

See accompanying notes to consolidated financial statements.

 

- F4 -


RESMED INC. AND SUBSIDIARIES

Consolidated Statements of StockholdersÂ’ Equity

Years ended June 30, 2014, 2013 and 2012

(In thousands)

 

   

 

Common Stock

    Additional
Paid-in
Capital
   

 

Treasury Stock

    Retained
Earnings
    Accumulated
Other
Comprehensive
Income (Loss)
    Total  
    Shares     Amount       Shares     Amount        

Balance, June 30, 2011

    165,784      $  607      $ 798,461        (14,115 )    $ (504,625 )    $ 1,111,862      $ 324,432      $  1,730,737   

Common stock issued on exercise of options (note 12)

    3,271        13        56,337                                        56,350   

Common stock issued on vesting of restricted stock units, net of shares withheld for tax (note 12)

    329        1        (3,279 )                                      (3,278 ) 

Common stock issued on employee stock purchase plan (note 12)

    369        1        8,783                                        8,784   

Treasury stock purchases

            (54 )              (13,617 )      (391,201 )                      (391,255 ) 

Tax benefit from exercise of options

                    8,620                                        8,620   

Stock-based compensation costs

                    30,795                                        30,795   

Other comprehensive income

                                                    (87,976 )      (87,976 ) 

Net income

                                            254,850                254,850   

Dividends declared

                                            -                -   
                                                                 
                                                                 

Balance, June 30, 2012

    169,753      $ 568      $ 899,717        (27,732 )    $ (895,826 )    $ 1,366,712      $ 236,456      $ 1,607,627   

Common stock issued on exercise of options (note 12)

    3,433        14        65,635                                        65,649   

Common stock issued on vesting of restricted stock units, net of shares withheld for tax (note 12)

    529        2        (7,180 )                                      (7,178 ) 

Common stock issued on employee stock purchase plan (note 12)

    324        1        10,451                                        10,452   

Treasury stock purchases

            (17 )              (4,294 )      (188,019 )                      (188,036 ) 

Tax benefit from exercise of options

                    18,215                                        18,215   

Stock-based compensation costs

                    38,226                                        38,226   

Other comprehensive income

                                                    (144,368 )      (144,368 ) 

Net income

                                            307,133                307,133   

Dividends declared

                                            (97,204 )              (97,204 ) 
                                                                 
                                                                 

Balance, June 30, 2013

    174,039      $ 568      $ 1,025,064        (32,026 )    $ (1,083,845 )    $ 1,576,641      $ 92,088      $ 1,610,516   

Common stock issued on exercise of options (note 12)

    1,681        7        31,157                                        31,164   

Common stock issued on vesting of restricted stock units, net of shares withheld for tax (note 12)

    713        3        (11,302 )                                      (11,299 ) 

Common stock issued on employee stock purchase plan (note 12)

    314        1        13,052                                        13,053   

Treasury stock purchases

            (18 )              (4,416 )      (208,065 )                      (208,083 ) 

Tax benefit from exercise of options

                    16,211                                        16,211   

Stock-based compensation costs

                    43,462                                        43,462   

Other comprehensive income

                                                    59,469        59,469   

Net income

                                            345,273                345,273   

Dividends declared

                                            (141,518 )              (141,518 ) 
                                                                 
                                                                 

Balance, June 30, 2014

    176,747      $ 561      $ 1,117,644        (36,442 )    $ (1,291,910 )    $ 1,780,396      $ 151,557      $ 1,758,248   

 

See accompanying notes to consolidated financial statements.

 

- F5 -


RESMED INC. AND SUBSIDIARIES

Consolidated Statements of Cash Flows

Years ended June 30, 2014, 2013 and 2012

(In thousands)

 

     June 30,
2014
    June 30,
2013
    June 30,
2012
 
    


Cash flows from operating activities:

                        

Net income

   $ 345,273     $ 307,133     $ 254,850  

Adjustment to reconcile net income to net cash provided by operating activities:

                        

Depreciation and amortization

     73,454       78,280       85,856  

Stock-based compensation costs

     43,457       38,157       30,586  

Impairment of cost-method investments

     -        475       4,016  

Changes in fair value of business combination contingent consideration

     (6,283 )      (1,827 )      (1,571 ) 

Foreign currency revaluation

     (6,252 )      6,258       (13,652 ) 

Gain on previously held equity interest resulting from business combination

     -        -        (2,070 ) 

Excess tax benefit from stock-based compensation arrangements

     (16,335 )      (18,307 )      (8,748 ) 

Changes in operating assets and liabilities, net of effect of acquisitions:

                        

Accounts receivable, net

     (35,108 )      (37,267 )      (20,293 ) 

Inventories, net

     (15,851 )      27,143       18,806  

Prepaid expenses, net deferred income taxes and other current assets

     5,814       (28,678 )      (37,938 ) 

Accounts payable, accrued expenses and other liabilities

     3,099       31,456       73,317  
    


Net cash provided by operating activities

     391,268       402,823       383,159  
    


Cash flows from investing activities:

                        

Purchases of property, plant and equipment

     (72,722 )      (63,579 )      (47,135 ) 

Patent registration costs

     (8,434 )      (8,203 )      (6,972 ) 

Purchases of other intangible assets

     -        -        (7,000 ) 

Business acquisitions, net of cash acquired

     (3,852 )      (5,418 )      (53,322 ) 

Investments in cost-method investments

     (10,850 )      (2,225 )      (4,796 ) 

Proceeds from disposal of cost-method investments

     -        -        499  

Purchases of foreign currency contracts

     (1,477 )      (1,117 )      (1,464 ) 

Proceeds from exercise of foreign currency contracts

     2,348       2,542       18,575  
    


Net cash used in investing activities

     (94,987 )      (78,000 )      (101,615 ) 
    


Cash flows from financing activities:

                        

Proceeds from issuance of common stock, net

     33,354       69,239       62,491  

Excess tax benefit from stock-based compensation arrangements

     16,335       18,307       8,748  

Purchases of treasury stock

     (202,169 )      (186,258 )      (392,743 ) 

Payment of business combination contingent consideration

     (1,117 )      (7,790 )      -   

Proceeds from borrowings, net of borrowing costs

     557,834       150,000       270,384  

Repayment of borrowings

     (560,035 )      (100,221 )      (125,985 ) 

Dividends paid

     (141,518 )      (97,204 )      -   
    


Net cash used in financing activities

     (297,316 )      (153,927 )      (177,105 ) 
    


Effect of exchange rate changes on cash

     30,717       (104,389 )      (30,165 ) 
    


Net increase in cash and cash equivalents

     29,682       66,507       74,274  

Cash and cash equivalents at beginning of period

     876,048       809,541       735,267  
    


Cash and cash equivalents at end of period

   $ 905,730     $ 876,048     $ 809,541  
    


Supplemental disclosure of cash flow information:

                        

Income taxes paid, net of refunds

   $ 90,183     $ 85,724     $ 55,206  

Interest paid

   $ 6,129     $ 6,387     $ 4,786  
    


Fair value of assets acquired, excluding cash

   $ 2,257     $ 5,970     $ 24,648  

Liabilities assumed

     (829 )      (2,278 )      (5,056 ) 

Goodwill on acquisition

     3,227       13,876       51,798  

Deferred payments

     (803 )      -        -   

Fair value of contingent consideration

     -        (12,150 )      (6,850 ) 
    


Total purchase price, excluding contingent consideration

     3,852       5,418       64,540  

Less: Consideration not paid in the current period

     -        -        (11,218 ) 
    


Cash paid for acquisition

   $ 3,852     $ 5,418     $ 53,322  
    


See accompanying notes to consolidated financial statements.

 

- F6 -


RESMED INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

 

(1)   Organization and Basis of Presentation

 

ResMed Inc. (referred to herein as “we”, “us”, “our” or the “Company”) is a Delaware corporation formed in March 1994 as a holding company for the ResMed Group. Through our subsidiaries, we design, manufacture and market equipment for the diagnosis and treatment of sleep-disordered breathing and other respiratory disorders, including obstructive sleep apnea. Our manufacturing operations are located in Australia, Singapore, France, Germany, Malaysia and the United States. Major distribution and sales sites are located in the United States, Germany, France, the United Kingdom, Switzerland, Australia, Japan, Norway and Sweden.

 

(2)   Summary of Significant Accounting Policies

 

  (a) Basis of Consolidation

 

The consolidated financial statements include the accounts of the Company and its wholly owned subsidiaries. All significant inter-company transactions and balances have been eliminated in consolidation.

 

The preparation of financial statements in conformity with accounting principles generally accepted in the United States requires management estimates and assumptions that affect amounts reported in the consolidated financial statements and accompanying notes. Actual results could differ from managementÂ’s estimates.

 

  (b) Revenue Recognition

 

We generally record revenue on product sales at the time of shipment, which is when title transfers to the customer. We do not record revenue on product sales which require customer acceptance until we receive acceptance. We initially defer service revenue received in advance from service contracts and recognize that deferred revenue ratably over the life of the service contract. We initially defer revenue we receive in advance from rental unit contracts and recognize that deferred revenue ratably over the life of the rental contract. Otherwise, we recognize revenue from rental unit contracts ratably over the life of the rental contract. We include in revenue freight charges we bill to customers. We charge all freight-related expenses to cost of sales. Taxes assessed by government authorities that are imposed on and concurrent with revenue-producing transactions, such as sales and value added taxes, are excluded from revenue.

 

We do not recognize revenues to the extent that we offer a right of return or other recourse with respect to the sale of our products, other than returns for product defects or other warranty claims, nor do we recognize revenues if we offer variable sale prices for subsequent events or activities. However, as part of our sales processes we may provide upfront discounts for large orders, one-time special pricing to support new product introductions, sales rebates for centralized purchasing entities or price-breaks for regular order volumes. We record the costs of all such programs as an adjustment to revenue. Our products are predominantly therapy-based equipment and require no installation. Therefore, we have no installation obligations.

 

  (c) Cash and Cash Equivalents

 

Cash equivalents include certificates of deposit and other highly liquid investments and we state them at cost, which approximates market. We consider investments with original maturities of 90 days or less to be cash equivalents for purposes of the consolidated statements of cash flows.

 

- F7 -


RESMED INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

 

(2)   Summary of Significant Accounting Policies, Continued

 

Our cash and cash equivalents balance at June 30, 2014, include $151.9 million in cash which is subject to a notice period of 90 days. These cash balances earn interest rates above normal term deposit rates otherwise available and are held at highly rated financial institutions.

 

  (d) Inventories

 

We state inventories at the lower of cost (determined principally by the first-in, first-out method) or net realizable value. We include material, labor and manufacturing overhead costs in finished goods and work-in-process inventories. We review and provide for any product obsolescence in our manufacturing and distribution operations by assessing throughout the year individual products and components (based on estimated future usage and sales).

 

  (e) Property, Plant and Equipment

 

We record property, plant and equipment, including rental equipment at cost. We compute depreciation expense using the straight-line method over the estimated useful lives of the assets. Useful lives are generally two to ten years except for buildings which are depreciated over an estimated useful life of 40 years and leasehold improvements, which we amortize over the lease term. We charge maintenance and repairs to expense as we incur them.

 

  (f) Intangible Assets

 

We capitalize the registration costs for new patents and amortize the costs over the estimated useful life of the patent, which is generally five years. If a patent is superseded or a product is retired, any unamortized costs are written off immediately.

 

We amortize all of our other intangible assets on a straight-line basis over their estimated useful lives, which range from two to nine years. We evaluate the recoverability of intangible assets periodically and take into account events or circumstances that warrant revised estimates of useful lives or that indicate that impairment exists. We have not identified any impairment of intangible assets during any of the periods presented.

 

  (g) Goodwill

 

We conducted our annual review for goodwill impairment during the final quarter of fiscal 2014 using a quantitative assessment. In conducting our review of goodwill impairment, we identified 8 reporting units, being components of our operating segment. The fair value for each reporting unit was determined based on estimated discounted cash flows. Our goodwill impairment review involved a two-step process as follows:

 

Step 1-

  Compare the fair value for each reporting unit to its carrying value, including goodwill. For each reporting unit where the carrying value, including goodwill, exceeds the reporting unit’s fair value, move on to step 2. If a reporting unit’s fair value exceeds the carrying value, no further work is performed and no impairment charge is necessary.

Step 2-

  Allocate the fair value of the reporting unit to its identifiable tangible and non-goodwill intangible assets and liabilities. This will derive an implied fair value for the goodwill. Then, compare the implied fair value of the reporting unit’s goodwill with the carrying amount of the reporting unit’s goodwill. If the carrying amount of the reporting unit’s goodwill is greater than the implied fair value of its goodwill, an impairment loss must be recognized for the excess.

 

- F8 -


RESMED INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

 

(2)   Summary of Significant Accounting Policies, Continued

 

The results of Step 1 of our annual review indicated that no impaired goodwill exists as the fair value for each reporting unit significantly exceeded its carrying value.

 

  (h) Foreign Currency

 

The consolidated financial statements of our non-U.S. subsidiaries, whose functional currencies are other than the U.S. dollar, are translated into U.S. dollars for financial reporting purposes. We translate assets and liabilities of non-U.S. subsidiaries whose functional currencies are other than the U.S. dollar at period end exchange rates, but translate revenue and expense transactions at average exchange rates for the period. We recognize cumulative translation adjustments as part of comprehensive income, as detailed in the consolidated statements of comprehensive income, and include those adjustments in accumulated other comprehensive income in the consolidated balance sheets until such time the relevant subsidiary is sold or substantially or completely liquidated. We reflect gains and losses on transactions denominated in other than the functional currency of an entity in our results of operations.

 

  (i) Research and Development

 

We record all research and development expenses in the period we incur them.

 

  (j) Financial Instruments

 

The carrying value of financial instruments, such as cash equivalents, accounts receivable and accounts payable, approximate their fair value because of their short-term nature. The carrying value of long-term debt approximates its fair value as the principal amounts outstanding are subject to variable interest rates that are based on market rates which are regularly reset. Foreign currency hedging instruments are marked to market and therefore reflect their fair value. We do not hold or issue financial instruments for trading purposes.

 

The fair value of financial instruments is the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date.

 

  (k) Foreign Exchange Risk Management

 

We enter into various types of foreign exchange contracts in managing our foreign exchange risk, including derivative financial instruments encompassing forward exchange contracts and foreign currency options.

 

The purpose of our foreign currency hedging activities is to protect us from adverse exchange rate fluctuations with respect to net cash movements resulting from the sales of products to foreign customers and Australian and Singapore manufacturing activities. We enter into foreign exchange contracts to hedge anticipated sales and manufacturing costs, principally denominated in Australian and Singapore dollars, and Euros. The terms of such foreign exchange contracts generally do not exceed three years.

 

We have determined our hedge program to be a non-effective hedge as defined. We record the foreign currency derivatives portfolio at fair value and include it in other assets and accrued expenses in our consolidated balance sheets. We do not offset the fair value amounts recognized for foreign currency derivatives. We classify purchases of foreign currency derivatives and proceeds received from the exercise of foreign currency derivatives as an investing activity within our consolidated statements of cash flows.

 

- F9 -


RESMED INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

 

(2)   Summary of Significant Accounting Policies, Continued

 

We record all movements in the fair value of the foreign currency derivatives within other income, net in our consolidated statements of income.

 

  (l) Income Taxes

 

We account for income taxes under the asset and liability method. We recognize deferred tax assets and liabilities for the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases. We measure deferred tax assets and liabilities using the enacted tax rates we expect to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled. The effect on deferred tax assets and liabilities of a change in tax rates is recognized in income in the period that includes the enactment date.

 

  (m) Allowance for Doubtful Accounts

 

We maintain an allowance for doubtful accounts for estimated losses resulting from the inability of our customers to make required payments, which results in bad debt expense. We determine the adequacy of this allowance by periodically evaluating individual customer receivables, considering a customerÂ’s financial condition, credit history and current economic conditions. We are also contingently liable, within certain limits, in the event of a customer default, to independent leasing companies in connection with customer leasing programs. We monitor the collection status of these installment receivables and provide for estimated losses separately under accrued expenses within our consolidated balance sheets based upon our historical collection experience with such receivables and a current assessment of our credit exposure.

 

  (n) Impairment of Long-Lived Assets

 

We periodically evaluate the carrying value of long-lived assets to be held and used, including certain identifiable intangible assets, when events and circumstances indicate that the carrying amount of an asset may not be recovered. Recoverability of assets to be held and used is measured by a comparison of the carrying amount of an asset to future net cash flows expected to be generated by the asset. If assets are considered to be impaired, we recognize as the impairment the amount by which the carrying amount of the assets exceeds the fair value of the assets. We report assets to be disposed of at the lower of the carrying amount or fair value less costs to sell.

 

We recognized no impairment charges in relation to long-lived assets during fiscal years ended June 30, 2014, 2013 and 2012.

 

(3)   New Accounting Pronouncements

 

In May, 2014, the FASB issued ASU No. 2014-09, Revenue from Contracts with Customers, which requires an entity to recognize the amount of revenue to which it expects to be entitled for the transfer of promised goods or services to customers. The ASU will replace most existing revenue recognition guidance in U.S. GAAP when it becomes effective. The new standard is effective for the Company beginning in the first quarter of fiscal year 2018. Early application is not permitted. The standard permits the use of either the retrospective or cumulative effect transition method. The Company is evaluating the effect that ASU 2014-09 will have on its consolidated financial statements and related disclosures. The Company has not yet selected a transition method nor has it determined the effect of the standard on its ongoing financial reporting.

 

- F10 -


RESMED INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

 

(4)   Earnings Per Share

 

We compute basic earnings per share by dividing the net income available to common stockholders by the weighted average number of shares of common stock outstanding. For purposes of calculating diluted earnings per share, the denominator includes both the weighted average number of shares of common stock outstanding and the number of dilutive common stock equivalents such as stock options and restricted stock units.

 

The weighted average number of outstanding stock options and restricted stock units not included in the computation of diluted earnings per share were 273,000, 236,000 and 1,336,000 for the years ended June 30, 2014, 2013 and 2012, respectively, as the effect would have been anti-dilutive.

 

Basic and diluted earnings per share for the years ended June 30, 2014, 2013 and 2012 are calculated as follows (in thousands except per share data):

 

     2014      2013      2012  

Numerator:

                          

Net Income, used in calculating diluted earnings per share

   $ 345,273      $ 307,133      $ 254,850  

Denominator:

                Â