Form: 10-K

Annual report pursuant to Section 13 and 15(d)

August 5, 2016

Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

FORM 10-K

 

[X] ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF

THE SECURITIES EXCHANGE ACT OF 1934

 

For the fiscal year ended June 30, 2016

 

Commission file number: 001-15317

 

RESMED INC.

(Exact name of registrant as specified in its charter)

 

DELAWARE

(State or other jurisdiction of incorporation or organization)

 

98-0152841

(IRS Employer Identification No.)

 

9001 Spectrum Center Blvd.

San Diego, CA 92123

United States of America

(Address of principal executive offices)

 

(858) 836-5000

(Registrant’s telephone number, including area code)

 

Securities registered pursuant to Section 12(b) of the Act:

TITLE OF EACH CLASS

Common Stock, $0.004 Par Value

 

Name of each exchange upon which registered

New York Stock Exchange

 

Securities registered pursuant to Section 12(g) of the Act

None

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes [ x ]    No [   ]

 

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act.    Yes [   ]    No [ x ]

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes [ x ]    No [   ]

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes [ x ]    No [   ]

 

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulations S-K (§ 229.405 of this Chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K [    ]

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer [ x ]    Accelerated filer [   ]    Non-accelerated filer [   ]    Smaller reporting company [   ]

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes [   ]    No [ x ]

 

The aggregate market value of the voting and non-voting common equity held by non-affiliates of registrant as of December 31, 2015 (the last business day of the registrant’s most recently completed second fiscal quarter), computed by reference to the closing sale price of such stock on the New York Stock Exchange, was $7,432,055,423. All directors, executive officers, and 10% stockholders of registrant are considered affiliates.

 

At July 28, 2016, registrant had 140,699,937 shares of Common Stock, $0.004 par value, issued and outstanding. This number excludes 41,086,234 shares held by the registrant as treasury shares.

 

Portions of the registrant’s definitive Proxy Statement to be delivered to stockholders in connection with the registrant’s 2016 Annual Meeting of Stockholders, to be filed subsequent to the date hereof, are incorporated by reference into Part III of this report.


Table of Contents

 

CONTENTS

 


 

          Cautionary Note Regarding Forward Looking Statements      1   

Part I

   Item 1    Business      1   
     Item 1A    Risk Factors      21   
     Item 1B    Unresolved Staff Comments      35   
     Item 2    Properties      35   
     Item 3    Legal Proceedings      36   
     Item 4    Mine Safety Disclosures      37   

Part II

   Item 5    Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities      38   
     Item 6    Selected Financial Data      41   
     Item 7    Management’s Discussion and Analysis of Financial Condition and Results of Operations      43   
     Item 7A    Quantitative and Qualitative Disclosures About Market and Business Risks      54   
     Item 8    Consolidated Financial Statements and Supplementary Data      57   
     Item 9    Changes in and Disagreements with Accountants on Accounting and Financial Disclosure      58   
     Item 9A    Controls and Procedures      58   
     Item 9B    Other Information      61   

Part III

   Item 10    Directors, Executive Officers and Corporate Governance      62   
     Item 11    Executive Compensation      62   
     Item 12    Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters      62   
     Item 13    Certain Relationships and Related Transactions and Director Independence      62   
     Item 14    Principal Accounting Fees and Services      62   

Part IV

   Item 15    Exhibits and Consolidated Financial Statement Schedules      63   
          Signatures      S-1   

 

As used in this 10-K, the terms “we”, “us”, “our” and “the Company” refer to ResMed Inc., a Delaware corporation, and its subsidiaries, on a consolidated basis, unless otherwise stated.


Table of Contents

PART I


 

Cautionary Note Regarding Forward-Looking Statements

 

This report contains certain forward-looking statements and information that are based on the beliefs of our management as well as estimates and assumptions made by, and information currently available to our management. All statements other than statements regarding historical facts are forward-looking statements. The words “believe,” “expect,” “anticipate,” “intend,” “seek,” “will,” “will continue,” “estimate,” “plan,” “future” and other similar expressions generally identify forward-looking statements, including, in particular, statements regarding the development and approval of new products and product applications, market expansion, pending litigation, and the development of new markets for our products, such as cardiovascular and stroke markets. These forward-looking statements are made under the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. You are cautioned not to place undue reliance on these forward-looking statements each of which applies only as of the date of this report. Such forward-looking statements reflect the views of our management at the time such statements are made and are subject to a number of risks, uncertainties, estimates and assumptions, including, without limitation, and in addition to those identified in the text surrounding such statements, those identified in Item 1A “Risk Factors” and elsewhere in this report.

 

In addition, important factors to consider in evaluating such forward-looking statements include changes or developments in social, economic, market, legal or regulatory circumstances, changes in our business or growth strategy or an inability to execute our strategy due to changes in our industry or the economy generally, the emergence of new or growing competitors, the actions or omissions of third parties, including suppliers, customers, competitors and governmental authorities, and various other factors subject to risks and uncertainties which could cause actual results to materially differ from those projected or implied in the forward-looking statements. Should any one or more of these risks or uncertainties materialize, or the underlying estimates or assumptions prove incorrect, actual results may vary significantly from those expressed in such forward-looking statements, and there can be no assurance that the forward-looking statements contained in this report will in fact occur.

 

ITEM 1 BUSINESS

 

General

 

We are a global leader in the development, manufacturing, distribution and marketing of medical devices and cloud-based software applications that diagnose, treat and manage respiratory disorders including sleep disordered breathing, or SDB, chronic obstructive pulmonary disease, or COPD, neuromuscular disease and other chronic diseases. SDB includes obstructive sleep apnea, or OSA, and other respiratory disorders that occur during sleep. Our products and solutions are designed to improve patient quality of life, reduce the impact of chronic disease and lower healthcare costs as global healthcare systems continue to drive a shift in care from hospitals to the home and lower cost settings. Our cloud-based software digital health applications, along with our devices are designed to provide connected care to improve patient outcomes and efficiencies for our customers.

 

Following our formation in 1989, we commercialized a treatment for OSA. This treatment, nasal Continuous Positive Airway Pressure, or CPAP, was the first successful noninvasive treatment for OSA. CPAP systems deliver pressurized air, typically through a nasal mask, to prevent collapse of the upper airway during sleep.

 

Since the development of CPAP, we have expanded our business by developing or acquiring a number of innovative products and solutions for a broader range of respiratory disorders including

 

- 1 -


Table of Contents

technologies to be applied in medical and consumer products, ventilation devices, diagnostic products, mask systems for use in the hospital and home, headgear and other accessories, dental devices, portable oxygen concentrators, or POCs and cloud-based software informatics solutions to manage patient outcomes and customer and provider business processes. Our growth has been fueled by geographic expansion, our research and product development efforts, acquisitions and an increasing awareness of SDB and respiratory conditions like COPD as significant health concerns.

 

We employ approximately 5,250 people and sell our products in approximately 100 countries through a combination of wholly owned subsidiaries and independent distributors.

 

Our web site address is www.resmed.com. We make our periodic reports, together with any amendments, available on our website, free of charge, as soon as reasonably practicable after we electronically file or furnish the reports with the Securities and Exchange Commission, or SEC. Information contained on the website is not part of or incorporated into this annual report.

 

Corporate History

 

ResMed Inc., a Delaware corporation, was formed in March 1994 as the ultimate holding company for our operating subsidiaries. In June 1995, we completed an initial public offering of common stock and our common stock began trading on the NASDAQ National Market. In September 1999 we transferred our principal listing to the New York Stock Exchange, or NYSE, trading under the ticker symbol RMD. In November 1999, we established a secondary listing of our common stock via Chess Depositary Instruments, or CDIs, on the Australian Stock Exchange (now known as the Australian Securities Exchange), or ASX, also under the symbol RMD. Ten CDIs on the ASX represent one share of our common stock on the NYSE.

 

Our Australian subsidiary, ResMed Holdings Limited, was originally organized in 1989 by Dr. Peter Farrell to acquire from Baxter Center for Medical Research Pty Limited, or Baxter, the rights to certain technology relating to CPAP treatment as well as Baxter’s existing CPAP device business. Baxter acquired the rights to the technology in 1987, and sold CPAP devices in Australia from 1988 until our acquisition of the business.

 

Since formation we have acquired a number of businesses including distributors, suppliers, developers of medical equipment and related technologies and software solutions providers.

 

Segment Information

 

We have determined that we predominantly operate in a single operating segment, which is the sleep and respiratory disorders sector of the medical device industry. Due to the acquisition of Brightree LLC in April 2016, our operations now include the supply of business management software and services to medical equipment and home health providers. However, these operations, both in terms of revenue and profit, are not material to our global operations and therefore have not been separately reported. See Note 15 – Segment Information of the Notes to Financial Statements (Part II, Item 8) for financial information regarding segment reporting. Financial information about our revenues from and assets located in foreign countries is also included in the Notes to our consolidated financial statements.

 

The Market

 

We are focused on underpenetrated markets in the sleep and related respiratory care market where we believe our products can improve patient outcomes, create efficiencies for our customers, help physicians and providers better manage chronic disease and reduce overall healthcare system costs.

 

- 2 -


Table of Contents

Sleep

 

Sleep is a complex neurological process that includes two distinct states: rapid eye movement, or REM, sleep and non-rapid eye movement, or non-REM, sleep. REM sleep, which is about 20-25% of total sleep experienced by adults, is characterized by a high level of brain activity, bursts of rapid eye movement, increased heart and respiration rates, and paralysis of many muscles. Non-REM sleep is subdivided into four stages that generally parallel sleep depth; stage 1 is the lightest and stage 4 is the deepest.

 

The upper airway has no rigid support and is held open by active contraction of upper airway muscles. Normally, during REM sleep and deeper levels of non-REM sleep, upper airway muscles relax and the airway narrows. Individuals with narrow upper airways or poor muscle tone are prone to temporary collapses of the upper airway during sleep, called apneas, and to near closures of the upper airway called hypopneas. These breathing events result in a lowering of blood oxygen concentration, causing the central nervous system to react to the lack of oxygen or increased carbon dioxide and signaling the body to respond. Typically, the individual subconsciously arouses from sleep, causing the throat muscles to contract, opening the airway. After a few gasping breaths, blood oxygen levels increase and the individual can resume a deeper sleep until the cycle repeats itself. Sufferers of OSA typically experience ten or more such cycles per hour. While these awakenings greatly impair the quality of sleep, the individual is not normally aware of these disruptions. In addition, OSA has been recognized as a cause of hypertension and a significant co-morbidity for heart disease, stroke and diabetes.

 

A long-term epidemiology study published in 2013 estimated that 26% of adults age 30-70 have some form of obstructive sleep apnea. In the United States alone, this represents approximately 46 million people. Despite the high prevalence of OSA, there is a general lack of awareness of OSA among both the medical community and the general public. It is estimated that less than 20% of those with OSA have been diagnosed or treated. Many healthcare professionals are often unable to diagnose OSA because they are unaware that such non-specific symptoms as excessive daytime sleepiness, snoring, hypertension and irritability are characteristic of OSA.

 

While OSA has been diagnosed in a broad cross-section of the population, it is predominant among middle-aged men and those who are obese, smoke, consume alcohol in excess or use muscle-relaxing and pain-killing drugs. A strong association has been discovered between OSA and a number of cardiovascular diseases. Studies have shown that SDB is present in approximately 83% of patients with drug-resistant hypertension, approximately 72% of patients with type 2 diabetes, approximately 77% of patients with obesity and approximately 76% of patients with congestive heart failure.

 

Sleep-Disordered Breathing and Obstructive Sleep Apnea

 

Sleep-disordered breathing encompasses all disease processes that cause abnormal breathing patterns during sleep. Manifestations include OSA, central sleep apnea, or CSA, and hypoventilation syndromes that occur during sleep. Hypoventilation syndromes are generally associated with obesity, chronic obstructive lung disease and neuromuscular disease. OSA is the most common form of SDB.

 

Sleep fragmentation and the loss of the deeper levels of sleep caused by OSA can lead to excessive daytime sleepiness, reduced cognitive function, including memory loss and lack of concentration, depression and irritability. OSA sufferers also experience an increase in heart rate and an elevation of blood pressure during the cycle of apneas. Several studies indicate that the oxygen desaturation, increased heart rate and elevated blood pressure caused by OSA may be associated with increased risk of cardiovascular morbidity and mortality due to angina, stroke and heart attack. Patients with OSA have been shown to have impaired daytime performance in a variety of cognitive functions including problem solving, response speed and visual motor coordination, and studies have linked OSA to increased occurrences of traffic and workplace accidents.

 

- 3 -


Table of Contents

Generally, an individual seeking treatment for the symptoms of OSA is referred by a general practitioner to a sleep specialist for further evaluation. The diagnosis of OSA typically requires monitoring the patient during sleep at either a sleep clinic or the patient’s home. During overnight testing, respiratory parameters and sleep patterns may be monitored, along with other vital signs such as heart rate and blood oxygen levels. Simpler tests, using devices such as our Apnealink, or our automatic positive airway pressure devices, monitor airflow during sleep, and use computer programs to analyze airflow patterns. These tests allow sleep clinicians to detect any sleep disturbances such as apneas, hypopneas or subconscious awakenings.

 

Before 1981, the primary treatment for OSA was a tracheotomy, a surgical procedure to create a hole in the patient’s windpipe. Alternative surgical treatments have involved either uvulopalatopharyngoplasty, or UPPP, in which surgery is performed on the upper airway to remove excess tissue and to streamline the shape of the airway or implanting a device to add support to the soft palate. UPPP alone has a poor success rate; however, when performed in conjunction with multi-stage upper airway surgical procedures, a greater success rate has been claimed. These combined procedures, performed by highly specialized surgeons, are expensive and involve prolonged and often painful recovery periods. Surgical treatments are not considered first line therapy for OSA. Other alternative treatments available today include nasal surgery, mandibular advancement surgery, dental appliances, palatal implants, somnoplasty, nasal devices and electrical stimulation of the nerves or muscles. Alternative pharmaceutical therapy treatments are reported to be under development.

 

A variety of devices are marketed for the treatment of OSA. Most are only partially effective, but CPAP is a reliable treatment for all severities of OSA and is considered first-line therapy. Use of mandibular advancement devices is increasing as a second-line option in patients unable to use CPAP or those with mild OSA. These devices cause the mandible and tongue to be pulled forward and improve the dimensions of the upper airway. CPAP is a non-invasive means of treating OSA. CPAP was first used as a treatment for OSA in 1980 by Dr. Colin Sullivan, the past Chairman of our Medical Advisory Board and was commercialized for treatment of OSA in the United States in the mid 1980’s. During CPAP treatment, a patient sleeps with a nasal interface connected to a small portable airdevice that delivers room air at a positive pressure. The patient breathes in air from the device and breathes out through an exhaust port in the interface. Continuous air pressure applied in this manner acts as a pneumatic splint to keep the upper airway open and unobstructed. Interfaces include nasal masks and nasal pillows. Sometimes, when a patient leaks air through their mouth, a full-face mask may need to be used, rather than a nasal interface.

 

CPAP is not a cure and therefore, must be used on a nightly basis as long as treatment is required. Patient compliance has been a major factor in the efficacy of CPAP treatment. Early generations of CPAP units provided limited patient comfort and convenience. Patients experienced soreness from the repeated use of nasal masks and had difficulty falling asleep with the CPAP device operating at the prescribed pressure. In more recent years, product innovations to improve patient comfort and compliance have been developed. These include more comfortable patient interface systems; delay timers that gradually raise air pressure allowing the patient to fall asleep more easily; bilevel air devices, including Variable Positive Airway Pressure, or VPAP systems, which provide different air pressures for inhalation and exhalation; heated humidification systems to make the airflow more comfortable; and autotitration devices that reduce the average pressure delivered during the night.

 

Respiratory Care

 

Our aim is to provide respiratory care solutions to patients suffering from COPD and other chronic respiratory diseases, such as overlap syndrome, obesity hypoventilation syndrome, or OHS, and neuromuscular disease, including amyotrophic lateral sclerosis, or ALS. We aim to improve their quality of life and slow down disease progression and reduce the costs of patient management.

 

- 4 -


Table of Contents

Our products cover patients ranging from those who only require therapy from CPAP or VPAP systems at night, through to those who are dependent on non-invasive or invasive ventilation for life-support and those who require long-term oxygen therapy. Our devices are used in the home, general hospital wards, respiratory wards and the acute and intensive care setting. We supply CPAP and VPAP systems, non-invasive and invasive ventilators, humidifiers and accessories, including masks and tubing. In addition, we supply specific support solutions for non-invasive and invasive ventilation including mouth piece ventilation, secretion clearance assistance and battery back-up. We also offer stationary and portable battery powered oxygen concentrators for the administration of long-term oxygen therapy in the home as well as data management systems designed to improve the management of patients.

 

Chronic Obstructive Pulmonary Disease.    COPD encompasses a group of lung diseases defined by persistent airflow limitation, prolongation of exhalation and loss of elasticity in the lungs. It is a progressive and debilitating disease and is associated with an increased inflammatory response in the airways to noxious gases or particles. Symptoms encountered with COPD include shortness of breath on exertion as well as chronic cough and sputum production. COPD includes diseases such as emphysema and chronic bronchitis. It is estimated that up to 10% of adults of at least 40 years of age worldwide suffer from COPD.

 

Patients with COPD can have different clinical presentations. Patients with chronic bronchitis present with hypoxemia and hypercapnia, a chronic productive cough, cor pulmonale and are commonly overweight. Patients with emphysema have more normal blood gases, are usually thin and hyperinflated and have a decreased diffusion capacity. During sleep, chronic bronchitic patients display more severe hypoxemia. In general, the more hypoxic a COPD patient is during the day the more severe the hypoxemia experienced during sleep. Hypercapnia as a consequence of hypoventilation also occurs in COPD patients and is more pronounced in REM sleep. Some COPD patients may also suffer from co-morbid OSA, a condition known as Overlap Syndrome.

 

Overlap Syndrome.    In patients with Overlap Syndrome, CPAP has been shown to provide benefits in relation to reducing mortality, decreasing hospitalizations and improving lung function and gas exchange. Non-invasive ventilation, or NIV, has been demonstrated to improve outcomes in patients with acute exacerbations of COPD through its ability to improve respiratory acidosis and decrease dyspnea and work of breathing. It may also increase survival rates and reduce length of hospital stays, as well as reducing and complication rates of factors such as ventilator-associated pneumonia. In patients with stable COPD the advantages of home NIV are less clear but clinical studies have shown improvements in dyspnoea scores and health-related quality of life measures and reductions in hospital readmissions and intensive care stays.

 

Long-term oxygen therapy, or LTOT, is indicated in chronic respiratory failure patients. The administration of LTOT has been shown to increase survival rates in patients with severe resting hypoxemia. In hypoxemic COPD patients LTOT is associated with a lower mortality compared to nocturnal oxygen therapy alone and improved health-related quality of life measures. In long-term COPD survivors with a history of congestive heart failure, LTOT is associated with a slowing of respiratory failure progression.

 

Obesity Hypoventilation Syndrome.    OHS is characterized by the combination of obesity, chronic alveolar hypoventilation leading to daytime hypercapnia and hypoxia and SDB after the exclusion of other causes of alveolar hypoventilation. OHS is frequently associated with OSA with an estimated 90% of patients also having OSA.

 

In patients with OHS, positive airway therapy, both CPAP and NIV, has been shown to effectively treat upper airway obstruction and reverse daytime respiratory failure as well as reduce the work of breathing and improve respiratory drive.

 

- 5 -


Table of Contents

Neuromuscular Disease.    Neuromuscular disease is a broad term that encompasses many diseases that either directly (via intrinsic muscle pathology) or indirectly (via nerve pathology) impair the functioning of muscles. Symptoms of neuromuscular disease and respiratory failure include increasing generalized weakness and fatigue, dysphagia, dyspnoea on exertion and at rest, sleepiness, morning headache, difficulties with concentration and mood changes. Most neuromuscular diseases are characterized by progressive muscular impairment leading to loss of ambulation, being wheelchair-bound, swallowing difficulties, respiratory muscle weakness and, eventually, death from respiratory failure. Neuromuscular disorders can be progress rapidly or slowly. Rapidly progressive conditions, such as ALS and Duchenne muscular dystrophy in teenagers, are characterized by muscle impairment which worsens over months and can result in death within a few years. Variable or slowly progressive conditions, such as Myotonic muscular dystrophy, are characterized by muscle impairment that worsens over years and may mildly reduce life expectancy.

 

NIV treatment to patients with neuromuscular disease may lead to improvements in respiratory failure symptoms and daytime arterial blood gases. In ALS patients, NIV treatment has been associated with an improvement in quality of life measures, sleep-related symptoms and survival. Studies have demonstrated that patients with Duchenne muscular dystrophy may improve in quality of life measures and survival with NIV treatment.

 

Business Strategy

 

We believe that the SDB and respiratory care markets will continue to grow in the future due to a number of factors, including increasing awareness of OSA and COPD, improved understanding of the role of SDB treatment in the management of cardiac, neurologic, metabolic and related disorders, and an increase in the use of digital and product technology to improve patient outcomes and create efficiencies for customers and providers. Our strategy for expanding our business operations and capitalizing on the growth of the SDB and respiratory care markets consists of the following key elements:

 

Continue Product Development and Innovation.    We are committed to ongoing innovation in developing products for the diagnosis and treatment of SDB. We have been a leading innovator of products designed to treat SDB more effectively, increase patient comfort and encourage compliance with prescribed therapy. For example, in 2013, we introduced new products across both our mask and device categories, including the VPAP COPD, Quattro Air, Swift FX Bella, Swift FX Nano and ResMed’s SleepSeeker. In 2014, we introduced the AirFit™ P10 nasal pillows system, AirFit™ N10 nasal mask, AirFit™ F10 full-face mask and the Astral™ platform, our new generation of life support ventilators. During fiscal year 2015, we released significant new products across our device categories, including the AirSenseTM 10, AirCurveTM 10, and Lumis. In 2015, we also released the AirViewTM, our cloud-based remote monitoring and therapy management system, along with our Air Solutions platform that provides a suite of end-to-end healthcare informatics solutions that address customer business processes from diagnosis to monitoring and patient management and billing. In 2016, we introduced a number of new software solutions including our ResMed Resupply, GoScripts and new features and enhancements within our cloud-based software offerings. Through our acquisition of Brightree, we also acquired a suite of software-as-a-service solutions for U.S. based distributor and home health and hospice customers. In addition, through our acquisitions of Inova Labs and Curative Medical we acquired the Inova Labs range of POCs and a portfolio of Curative Medical SDB and ventilation products. We believe that the combination of continued product development, product and technology acquisitions and innovation are key factors to our ongoing success. Approximately 13% of our employees are devoted to research and development activities. In fiscal year 2016, we invested $118.7 million, or approximately 6% of our net revenues, in research and development.

 

- 6 -


Table of Contents

Expand Geographic Presence.    We market our products in more than 100 countries to sleep clinics, home healthcare dealers, patients and third-party payors. We intend to increase our sales and marketing efforts in our principal markets, as well as expand the depth of our presence in other high-growth geographic regions. In 2016, we acquired Curative Medical to invest in the China market and expand our growth potential in SDB, COPD and respiratory care in China.

 

Respiratory Care.    We are committed to ongoing innovation of our respiratory care products that serve the needs of patients with neuromuscular diseases and a growing global COPD patient population. With the addition of Inova Labs POCs and our non-invasive ventilator devices and masks and accessories, we intend to continue to expand and enhance our product offerings in this area.

 

Increase Public and Clinical Awareness.    We continue to expand our existing promotional activities to increase awareness of SDB, COPD and our treatment alternatives. These promotional activities target both the population predisposed to SDB and medical specialists, such as cardiologists, neurologists and pulmonologists. In addition, we also target special interest groups, including the National Stroke Association, the American Heart Association and the National Sleep Foundation, which should further increase awareness of the relationship between SDB or OSA, COPD, neuromuscular disease and co-morbidities such as cardiac disease, diabetes, hypertension and obesity. The programs should also support our efforts to inform the community of the dangers of sleep apnea with regard to occupational health and safety, especially in the transport industry. We have helped establish a center for clinical care and medical research at the University of California at San Diego in the fields of sleep apnea and COPD as well as the establishment of two perpetual academic chairs at the University of Sydney, called the ResMed Chair of Sleep Medicine for sleep-disordered breathing with a focus on chronic disease and the ResMed Chair of Biomedical Engineering with an emphasis on bio-informatics research.

 

Expand into New Clinical Applications.    We continually seek to identify new applications of our technology for significant unmet medical needs. Studies have established a clinical association between OSA and both stroke and congestive heart failure, and have recognized SDB as a cause of hypertension or high blood pressure. Research also indicates that SDB is independently associated with glucose intolerance and insulin resistance. In addition, we maintain close working relationships with a number of prominent physicians to explore new medical applications for our products and technology. In 2014, we received Food and Drug Administration, or FDA, clearance and launched a new product in the United States for the treatment of respiratory insufficiency due to chronic obstructive pulmonary disease and neuromuscular diseases.

 

Leverage the Experience of our Management Team.    Our senior management team has extensive experience in the medical device industry in general, and in the fields of SDB, respiratory care and healthcare informatics in particular. We intend to continue to leverage the experience and expertise of these individuals to maintain our innovative approach to the development of products and solutions, and to increase awareness of the serious medical problems caused by SDB and the use of in-home life support ventilation to treat COPD.

 

Products

 

Our portfolio of products includes devices, diagnostic products, mask systems, headgear and other accessories, dental devices, POCs and cloud-based software informatics solutions. For purposes of the following discussion, we refer to our air flow generators, ventilators and oxygen concentrators collectively as devices.

 

Devices

 

We produce CPAP, VPAP and AutoSet systems for the titration and treatment of SDB. The devices deliver positive airway pressure through a patient interface, either a small nasal mask, nasal pillows

 

- 7 -


Table of Contents

system, full-face mask or cannula. Our VPAP units deliver ultra-quiet, comfortable bilevel therapy. AutoSet systems are based on a proprietary technology to monitor breathing and can also be used in the diagnosis, treatment and management of OSA.

 

In 2014, we launched the Astral™, our new generation of portable, lightweight, and user-friendly life support ventilators. During fiscal year 2015, we released significant new products across our device categories, including the AirSenseTM 10, AirCurveTM 10, and Lumis. During fiscal year 2016, we acquired Inova Labs, which expanded our device category to include POCs. We also acquired a line of Chinese-developed and manufactured sleep and ventilation devices with the acquisition of Curative Medical.

 

Devices in total accounted for approximately 58%, 58% and 54% of our net revenues in fiscal years 2016, 2015, and 2014, respectively.

 

The tables below provide a selection of products, as known by our trademarks, which have been released during the last five years.

 

CONTINUOUS

POSITIVE AIRWAY
PRESSURE PRODUCTS

   DESCRIPTION   

DATE OF

COMMERCIAL

INTRODUCTION

   

AirSense 10 Elite

   An advanced fixed-pressure therapy device with an integrated humidifier. It is designed to be intuitive and easy-to-use. The device also features built-in wireless connectivity.    August 2014
   

AirSense 10 CPAP

  

The AirSense 10 CPAP is a fixed-pressure therapy device. It also provides compliance, AHI and leak data reporting. The device also features built-in wireless connectivity.

 

   August 2014

 

VARIABLE

POSITIVE AIRWAY
PRESSURE PRODUCTS

   DESCRIPTION   

DATE OF

COMMERCIAL

INTRODUCTION

   

S9 VPAP ST-A

   Bilevel pressure support therapy device with pressures up to 30 cmH2O designed for comfort, effective therapy with the assurance of back up rate up to 50 bpm and alarms. The device also has an optional integrated humidifier (H5i), ClimateLine heated tube and the small, lightweight SlimLine tube.    March 2013
   

S9 VPAP COPD

   Bilevel pressure support up to pressure 30cmH2O with both fixed and adjustable alarms. This device has been specifically designed for COPD.    April 2013
   

AirCurve 10 S

  

A bilevel device for patients who need extra pressure support or find it difficult to adjust to therapy on a fixed pressure continuous positive airway pressure device. Features built-in wireless connectivity and works seamlessly with ResMed’s AirView™ patient monitoring software.

 

   December 2014

 

- 8 -


Table of Contents

VARIABLE

POSITIVE AIRWAY
PRESSURE PRODUCTS

   DESCRIPTION   

DATE OF

COMMERCIAL

INTRODUCTION

   

AirCurve 10 V Auto

   An auto-adjusting bilevel device for patients who need greater pressure support to treat their obstructive sleep apnea. Features built-in wireless connectivity and works seamlessly with ResMed’s AirView™ patient monitoring software.    December 2014
   

AirCurve 10 ST

   A bilevel device with backup rate that provides exceptional patient-ventilator synchrony, reducing the work of breathing so patients remain comfortable and well ventilated. Features built-in wireless connectivity and works seamlessly with ResMed’s AirView™ patient monitoring software.    December 2014
   

AirCurve 10 ASV

   An adaptive servo-ventilator specifically designed to treat patients exhibiting central sleep apnea (CSA), mixed sleep apnea and periodic breathing, with or without obstructive sleep apnea. The device also features built-in wireless connectivity. Features built-in wireless connectivity and works seamlessly with ResMed’s AirView™ patient monitoring software.    December 2014
   

AirCurve 10 CS

  

An adaptive servo-ventilator specifically designed to treat patients exhibiting central sleep apnea (CSA), mixed sleep apnea and periodic breathing, with or without obstructive sleep apnea. The device also features built-in wireless connectivity. Features built-in wireless connectivity and works seamlessly with ResMed’s AirView™ patient monitoring software.

 

   December 2014

 

AUTOMATIC POSITIVE
AIRWAY PRESSURE
PRODUCTS
   DESCRIPTION   

DATE OF

COMMERCIAL

INTRODUCTION

   

AirSense 10 Auto

  

A premium auto-adjusting therapy device featuring AutoRamp™ with sleep onset detection, expiratory pressure relief (EPR™) and Easy-Breathe technology. The device also features built-in wireless connectivity.

 

   August 2014

 

- 9 -


Table of Contents

VENTILATION

PRODUCTS

   DESCRIPTION   

DATE OF

COMMERCIAL

INTRODUCTION

   

Astral 100 and 150

   Pressure support and volume ventilator for invasive and non-invasive purposes so it can be used from the hospital to the home    May 2014
   

Lumis* 100 and 150

   Pressure support non-invasive ventilators that support a variety of therapy modes, built-in wireless connectivity, integrated humidification and intuitive simplicity.    April 2015
   

Lumis ST-A

   Pressure support non-invasive ventilators that support a variety of therapy modes, built-in wireless connectivity, integrated humidification and intuitive simplicity and a range of fixed and adjustable alarms.    October 2015
   

LifeChoice POC

   Portable oxygen concentrators.    December 2012
   

Activox

  

Portable and stationary oxygen concentrator system.

 

   July 2014

* Sold outside United States only

 

Masks Systems, Diagnostic Products, Accessories and Other Products

 

Masks, diagnostic products and accessories together accounted for approximately 40%, 42% and 46% of our net revenues in fiscal years 2016, 2015, and 2014, respectively. In addition, Brightree revenue accounted for approximately 2% of our net revenue in fiscal year 2016.

 

Mask Systems and Diagnostic Products

 

Mask systems are one of the most important elements of SDB treatment systems. Masks are a primary determinant of patient comfort and as such may drive or impede patient compliance with therapy. We have been a consistent innovator in masks, improving patient comfort while minimizing size and weight.

 

MASK PRODUCTS    DESCRIPTION   

DATE OF

COMMERCIAL

INTRODUCTION

   
Swift FX Bella    Fourth generation nasal pillows system with an alternative headgear design    January 2012
   
Quattro Air    Next Generation lightweight Full Face Mask with improved comfort    June 2013
   
Swift FX Nano    A compact nasal mask designed to deliver an excellent user experience, without compromising on fit, comfort and ease of use.    June 2013
   
AirFit P10    A compact, lightweight nasal pillows system that has only three parts, including a new soft and stable QuickFit™ headgear.    January 2014

 

- 10 -


Table of Contents
MASK PRODUCTS    DESCRIPTION   

DATE OF

COMMERCIAL

INTRODUCTION

   
AirFit F10    A compact, lightweight full-face mask that delivers comfort, stability, and performance in a simple and elegant design.    April 2014
   
AirFit N10    A compact nasal mask that stands out with its comfort and visual freedom in a user-friendly design.    April 2014
   
AcuCare HFNC    The AcuCare high flow nasal cannula (HFNC) for high flow oxygen therapy.    August 2015

 

We market sleep recorders for the diagnosis and titration of SDB in sleep clinics and hospitals. These diagnostic systems record relevant respiratory and sleep data, which can be analyzed by a sleep specialist or physician who can then tailor an appropriate OSA treatment regimen for the patient.

 

DIAGNOSTIC  PRODUCTS    DESCRIPTION   

DATE OF

COMMERCIAL

INTRODUCTION

   
Apnealink Air    A portable diagnostic device which measures oximetry, respiratory effort, pulse, nasal flow and snoring. Works with EasyCare Online to provide comprehensive diagnostic solution to clinicians.    December 2013

 

Accessories and Other Products

 

To enhance patient comfort, convenience and compliance, we market a variety of other products and accessories. These products include humidifiers, helping to prevent the drying of nasal passages that can cause discomfort, carry bags and breathing circuits. To assist those professionals diagnosing or managing the treatment of patients there are data communications and control products such as EasyCare, ResLink, ResControl, ResControl II, TxControl, ResScan and ResTraxx modules. With the introduction of our latest solutions we are expanding our use of cloud-based patient management and engagement platforms such as AirView enabling remote monitoring, over-the-air trouble shooting and changing of device settings, U-Sleep enabling automated patient coaching through a text, email or interactive voice phone call and myAir, a patient engagement application that provides sleep data and a daily score based on their previous night’s data.

 

DATA / PATIENT
MANAGEMENT PRODUCTS
   DESCRIPTION   

DATE OF

COMMERCIAL

INTRODUCTION

   

EasyCare

   ResMed’s new compliance management solution offers both wireless and card-to-cloud functionality, providing access to patient data anywhere with an internet connection. Intuitive user interface, easy to understand reports and automated compliance notification.    April 2012

 

- 11 -


Table of Contents
DATA / PATIENT
MANAGEMENT PRODUCTS
   DESCRIPTION   

DATE OF

COMMERCIAL

INTRODUCTION

   

U-Sleep

   A flexible compliance solution that monitors CPAP device usage and helps HMEs manage their patients during their initial acclimatization and ongoing therapy.    August 2012
   

AirView

   AirView is a seamless, cloud-based system enabling remote monitoring and changing of patients’ device settings. AirView also makes it easier to simplify workflows and collaborate more efficiently across the patient’s care network.    August 2014
   

myAir

   A personalized therapy management application for patients with sleep-disordered breathing providing support, education and troubleshooting tools for increased patient engagement and improved compliance.    October 2014
   

S+

   A personalized sleep solution that uses patented bio-motion sensors, designed to measure an individual’s sleep stages and environment, and deliver personalized feedback that helps improve sleep.    October 2014
   

Connectivity Module

  

ResMed Connectivity Module (RCM) provides cellular connection between a compatible ResMed ventilation device and the ResMed AirView™ system.

 

   May 2016

 

Product Development and Clinical Trials

 

We have a strong track record in innovation in the sleep market. In 1989, we introduced our first CPAP device. Since then we have been committed to an ongoing program of product advancement and development. Currently, our product development efforts are focused on not only improving our current product offerings, but also expanding into new product applications.

 

We continually seek to identify new applications of our technology for significant unmet medical needs. SDB is associated with a number of symptoms beyond excessive daytime sleepiness and irritability. Studies have established a clinical association between SDB and hypertension, stroke, congestive heart failure and diabetes. We support clinical trials in many countries including the United States, Germany, France, the United Kingdom, Italy, Switzerland, China and Australia to develop new clinical applications for our technology.

 

We consult with physicians at major sleep centers throughout the world to identify technological trends in the treatment of SDB. New product ideas are also identified by our marketing staff, direct sales force, network of distributors, customers and patients.

 

In fiscal years 2016, 2015, and 2014 we invested $118.7 million, $114.9 million and $118.2 million, respectively, on research and development.

 

- 12 -


Table of Contents

Sales and Marketing

 

We currently market our products in more than 100 countries through a network of distributors and our direct sales force. We attempt to tailor our marketing approach to each national market, based on regional awareness of SDB as a health problem, physician referral patterns, consumer preferences and local reimbursement policies. See Note 15 – Segment Information of the Notes to Consolidated Financial Statements (Part II, Item 8) for financial information about our geographic areas.

 

North America and Latin America.    Our products are typically purchased by a home healthcare dealer who then sells the products to the patient. The decision to purchase our products, as opposed to those of our competitors, is made or influenced by one or more of the following individuals or organizations: the prescribing physician and his or her staff; the home healthcare dealer; the insurer and the patient. In North and Latin America, our sales and marketing activities are conducted through a field sales organization made up of regional territory representatives, program development specialists and regional sales directors. Our field sales organization markets and sells products to home healthcare dealer branch locations throughout North and Latin America.

 

We also market our products directly to physicians and sleep clinics. Patients who are diagnosed with OSA or another respiratory condition and prescribed our products are typically referred by the diagnosing physician or sleep clinic to a home healthcare dealer to fill the prescription. The home healthcare dealer, in consultation with the referring physician, will assist the patient in selecting the equipment, fit the patient with the appropriate mask and set the device pressure to the prescribed level.

 

Sales in North and Latin America accounted for 61%, 57% and 54% of our net revenues for fiscal years 2016, 2015, and 2014, respectively.

 

Europe.    We market our products in most major European countries. We have wholly-owned subsidiaries in Austria, Czech Republic, Denmark, Finland, France, Germany, Ireland, Netherlands, Norway, Poland, Sweden, Switzerland and the United Kingdom. We use independent distributors to sell our products in other areas of Europe. Distributors are selected in each country based on their knowledge of respiratory medicine and a commitment to SDB therapy. In each country in which we sell our products direct, a local senior manager is responsible for direct national sales. In many countries in Europe, we sell our products to home healthcare dealers or hospitals who then sell the products to the patients. In Germany, we also operate a home healthcare company, in which we provide products and services directly to patients, and receive reimbursement directly from third-party payors.

 

Sales in Europe accounted for 29%, 32% and 36% of our total net revenues for fiscal years 2016, 2015, and 2014, respectively.

 

Asia Pacific.    We have wholly-owned subsidiaries in Australia, China, India, Japan, Korea, New Zealand, and Taiwan. We use a combination of our direct sales force and independent distributors to sell our products in Asia Pacific. In Australia and New Zealand, we operate a home healthcare business and sell our products and services directly to patients. Sales in Asia Pacific accounted for 10%, 11% and 10% of our total net revenues for the fiscal years 2016, 2015, and 2014, respectively.

 

Market Growth Opportunities

 

We view the future of our business in sleep and respiratory disorders as having three horizons of growth supported by three key foundations.

 

Our three key foundations reach across all three of our horizons and include: our focus on operating excellence and high efficiency to leverages our global scale; second, our global leadership in digital

 

- 13 -


Table of Contents

health and connected care, an important advance in our product and solution offerings; and third, our expansion into high growth geographic areas including China, India, Eastern Europe, Brazil and Southeast Asia.

 

The first horizon includes our existing market in OSA treatment, where we believe our leadership in digital health and connected care is becoming an important distinguishing factor from our competitors. The use of technologies that allow remote collection and transfer of information through cloud-based computing is changing the current clinical pathways for following up with patients who use our devices, which we believe provides an opportunity to improve patient care and create efficiencies for customers and providers. We plan to continue to invest and expand our capabilities in this area.

 

The second horizon includes the use of connected devices for the treatment of respiratory failure both in the hospital and the home. We believe that COPD is a large and underpenetrated market where there are unmet patient needs as the global population with COPD continues to expand due to smoking and poor air quality. Some patients with later-stage COPD may benefit from the use of ventilation at night, but until recently only a small number of COPD patients were treated using ventilation on a long-term basis. A study published in 2014 found that patients with stable but severe COPD using non-invasive ventilation nightly for six months experienced a reduction in mortality and an improvement in quality of life and exercise capacity. The findings from this study and our associated marketing activities may result in an increase in the size of the homecare market for NIV. Additionally, the use of NIV is becoming routine in many acute care hospitals, as guidelines stipulate its use in acute exacerbations and familiarity with the techniques involved increases. In 2016, we expanded our product portfolio for the treatment of COPD with our acquisition of Inova Labs, a company that designs and manufactures POCs. Many patients in earlier stages of COPD may require oxygen therapy and through the use of NIV and POC products they can receive this treatment in the home.

 

Our third horizon focuses on a portfolio of new market options including chronic disease management, sleep and consumer wellness and clinical areas of interest in adjacent markets like atrial fibrillation, heart failure and asthma.

 

We continue to approach this horizon by emphasizing relationships with key opinion leaders in pulmonology, cardiology, neurology, and related clinical areas. A growing body of literature documents the association and interactions between a number of cardiac diseases and SDB. OSA is the most common secondary cause of hypertension and is prevalent in hypertensive populations, particularly those resistant to therapy. Treatment with CPAP tends to lower blood pressure. OSA is prevalent in those with atrial fibrillation and may trigger episodes of fibrillation. Treatment with CPAP appears to improve outcomes. OSA is also known to be a strong risk factor for the development of acute coronary disease and cardiovascular disease in general. Heart failure is also commonly associated with both OSA and CSA, and both forms of SDB are risk factors for poor outcomes. We are undertaking several clinical trials in cardiology to strengthen the knowledge base on the effects of SDB therapy on outcomes. In addition to clinical trials we pursue suitable opportunities with professional and healthcare associations to raise awareness of the importance of SDB in cardiology patients.

 

We are also working with occupational health professionals to raise awareness of the issues caused by untreated OSA in the workplace including accidents, absenteeism and reduced productivity, plus increased costs for employers who provide healthcare coverage for employees.

 

We continue to provide research funding in these strategic areas while at the same time providing educational support to physicians working within these various specialties. We believe that the increasing awareness among physicians supports the efforts and investment we are making in new markets.

 

- 14 -


Table of Contents

Manufacturing

 

Our manufacturing operations consist primarily of assembly and testing of our devices, masks and accessories. Of the numerous raw materials, parts and components purchased for assembly of our therapeutic and diagnostic sleep disorder products, most are off-the-shelf items available from multiple vendors. We also purchase uniquely configured components from various suppliers, including some who are single-source suppliers for us. Any reduction or halt in supply from one of these single-source suppliers could limit our ability to manufacture our products or devices until a replacement supplier is found and qualified. We generally manufacture to our internal sales forecasts and fill orders as received. Over the last few years, the manufacturing processes have been transformed along lean manufacturing guidelines to flow lines staffed by dedicated teams. Each team is responsible for the manufacture and quality of their product group and decisions are based on performance and quality measures, including customer feedback.

 

Our quality management system is based upon the requirements of ISO 9001, ISO 13485, FDA Quality System Regulations for Medical Devices, the Medical Device Directive (93/42/EEC) and other applicable regulations for the markets in which we sell. Our main manufacturing sites are certified to ISO 13485. These sites are subject to third-party audits, conducted by the ISO notified bodies, at regular intervals.

 

Details of our main manufacturing facilities are:

 

Location    Ownership Status
(Owned / Leased)
   Square footage      Primary Usage
Norwest,
Sydney,
Australia
   Owned      155,000       Primary manufacturing site – full product range
Loyang,
Singapore
   Leased      95,000       Primary manufacturing site – full product range
Chatsworth,
California
   Leased      72,000       Manufacturing facility for motor manufacturing
Austin,
Texas
   Leased      43,000       Manufacturing facility for portable oxygen concentrators
Paris, France    Leased      43,000       Manufacturing facility, field service
Johor Bahru,
Malaysia
   Leased      46,000       Manufacturing facility for headgear and accessories

 

Third-Party Coverage and Reimbursement

 

The cost of medical care in many of the countries in which we operate is funded in substantial part by government and private insurance programs. In Germany, we receive payments directly from these payors. Outside Germany, although we do not generally receive payments for our products directly from these payors, our success in major markets is dependent upon the ability of patients to obtain coverage and adequate reimbursement from third-party payors for our products.

 

In the United States, our products are purchased primarily by home healthcare dealers, hospitals or sleep clinics, who invoice third-party payors directly for reimbursement. Domestic third-party payors

 

- 15 -


Table of Contents

include government payors such as Medicare and Medicaid and commercial health insurance plans. These payors may deny coverage and reimbursement if they determine that a device is not used in accordance with certain covered treatment methods, or is experimental, unnecessary or inappropriate. The long-term trend towards cost-containment, through managed healthcare, or other legislative proposals to reform healthcare, could control or significantly influence the purchase of healthcare services and products and could result in lower prices for our products. In some foreign markets, such as France, Germany and Japan, government reimbursement is currently available for purchase or rental of our products, subject to constraints such as price controls or unit sales limitations. In Australia and in some other foreign markets, there is currently limited or no reimbursement for devices that treat OSA.

 

The past decade of legislative reform in the United States, including, by way of example, the 2010 Patient Protection and Affordable Care Act, as amended by the Health Care and Education Reconciliation Act (collectively, the PPACA), Medicare Improvement for Patients and Providers Act of 2008 (MIPPA), Deficit Reduction Act of 2005 (DRA), and the Medicare Prescription Drug, Improvement, and Modernization Act of 2003 (MMA), has significantly impacted government reimbursement for products that we provide. The longer term impact, though not entirely predictable, continues to bring significant changes to the third-party payor landscape.

 

Beginning in 2005, the MMA established a Medicare competitive acquisition program for home medical equipment (HME) and imposed quality standards and accreditation requirements for HME suppliers. Effective 2011, the Centers for Medicare & Medicaid Services (CMS) implemented Round 1 of competitive bidding in 9 competitive bidding areas, or CBAs, and included home medical equipment that we manufacture and develop, specifically, CPAP and respiratory assist devices, and related supplies and accessories. The average reduction from the then current Medicare payment rates in Round 1 of competitive bidding implemented was approximately 32% overall and 34% for CPAP and respiratory devices. CMS is required by law to recompete these contracts at least once every three years. Since then there has been one recompete completed for Round 1 with rates that went into effect on January 1, 2014. In 2013, CMS announced the single payment amounts for Round 2, which covered a total of 91 CBAs. Effective July 1, 2013, the average reduction from the then-current Medicare payment rates in Round 2 was approximately 47% on a weighted average basis for CPAP and respiratory devices. In 2016, CMS implemented the Round 2 Recompete, which covered a total of 117 CBAs, and announced the single payment amounts, effective July 1, 2016. In addition, the ACA required CMS to roll out the competitive bidding process nationally or adjust prices in non-competitive bidding areas, also known as the Round 3 areas, to match competitive bidding prices by 2016. CMS phased in the new rates beginning January 1, 2016, and were fully effective July 1, 2016.

 

The ACA, which was passed both to expand the number of individuals with healthcare coverage and to develop additional revenue sources, also included, among other things, a deductible excise tax equal to 2.3% of the price for which medical devices are sold in the United States on any entity that manufactures or imports medical devices, with limited exceptions, beginning in 2013. However, this excise tax was subsequently suspended by the U.S. Congress for medical device sales during calendar years 2016 and 2017. If this excise tax had not been suspended it would be applicable to our products that are primarily used in hospitals and sleep labs, which includes the ApneaLink, VPAP Tx, certain Respiratory Care and dental sleep products. Absent further Congressional action, this excise tax will be reinstated for medical device sales beginning January 1, 2018. The ACA also provided for a number of Medicare regulatory requirements, including new face-to-face encounter requirements for durable medical equipment and home health services.

 

We cannot predict at this time the full impact of the ACA, or any U.S. legislation enacted in the future will have on our revenues, profit margins, profitability, operating cash flows and results of operations.

 

- 16 -


Table of Contents

Service and Warranty

 

We generally offer either one-year or two-year limited warranties on our devices. Warranties on mask systems are for 90 days. Our distributors either repair our products with parts supplied by us or arrange shipment of products to our facilities for repair or replacement.

 

We receive returns of our products from the field for various reasons. We believe that the level of returns experienced to date is consistent with levels typically experienced by manufacturers of similar devices. We provide for warranties and returns based on historical data.

 

Competition

 

The markets for our products are highly competitive. We believe that the principal competitive factors in all of our markets are product features, value-added solutions, reliability and price. Customer support, reputation and efficient distribution are also important factors.

 

We compete on a market-by-market basis with various companies, some of which have greater financial, research, manufacturing and marketing resources than us. Our primary competitors include Philips BV; Fisher & Paykel Healthcare Corporation Limited; DeVilbiss Healthcare; Apex Medical Corporation; BMC Medical Co. Ltd.; and regional manufacturers. The disparity between our resources and those of our competitors may increase as a result of the trend towards consolidation in the healthcare industry. In addition, some of our competitors, such as Weinmann Geräte für Medizin GmbH + Co. KG, are affiliates of customers of ours, which may make it difficult to compete with them. Finally, our products compete with surgical procedures and dental appliances designed to treat OSA and other SDB-related respiratory conditions. The development of new or innovative procedures or devices by others could result in our products becoming obsolete or noncompetitive, which would harm our revenues and financial condition.

 

Any product developed by us that gains regulatory clearance will have to compete for market acceptance and market share. An important factor in such competition may be the timing of market introduction of competitive products. Accordingly, the speed with which we can develop products, complete clinical testing and regulatory clearance processes and supply commercial quantities of the product to the market are important competitive factors. In addition, our ability to compete will continue to be dependent on successfully protecting our patents and other intellectual property.

 

Patents and Proprietary Rights and Related Litigation

 

We rely on a combination of patents, trade secrets, copyrights, trademarks and non-disclosure agreements to protect our proprietary technology and rights.

 

Through our various subsidiaries, as of the date of this annual report, we own or have licensed rights to approximately 1,043 issued United States patents (including approximately 413 design patents) and approximately 2,020 issued foreign patents. In addition, there are approximately 470 pending United States patent applications (including approximately 44 design patent applications), approximately 952 pending foreign patent applications, approximately 1,143 registered foreign designs and 54 pending foreign designs. Some of these patents, patent applications and designs relate to significant aspects and features of our products.

 

Of our patents, 193 United States patents and 427 foreign patents are due to expire in the next five years. There are 25 United States patents due to expire in 2017, 54 United States patents in 2018, 16 United States patents in 2019, 71 United States patents in 2020, and 27 United States patents in 2021. There are 35 foreign patents due to expire in 2017, 102 in 2018, 54 in 2019, 150 in 2020, and 86 in 2021. We believe that the expiration of these patents will not have a material adverse impact on our competitive position.

 

- 17 -


Table of Contents

Litigation may be necessary to enforce patents issued to us, to protect our rights, or to defend third-party claims of infringement by us of the proprietary rights of others. The defense and prosecution of patent claims, including pending claims, as well as participation in other inter-party proceedings, can be expensive and time-consuming, even in those instances in which the outcome is favorable to us. Patent laws regarding the enforceability of patents vary from country to country. Therefore, there can be no assurance that patent issues will be uniformly resolved, or that local laws will provide us with consistent rights and benefits.

 

Government Regulations

 

FDA

 

Our products are subject to extensive regulation particularly as to safety, efficacy and adherence to FDA Quality System Regulation, and related manufacturing standards. Medical device products are subject to rigorous FDA and other governmental agency regulations in the United States and similar regulations of foreign agencies abroad. The FDA regulates the design, development, research, preclinical and clinical testing, introduction, manufacture, advertising, labeling, packaging, marketing, distribution, import and export, and record keeping for such products, in order to ensure that medical products distributed in the United States are safe and effective for their intended use. In addition, the FDA is authorized to establish special controls to provide reasonable assurance of the safety and effectiveness of most devices. Non-compliance with applicable requirements can result in import detentions, fines, civil and administrative penalties, injunctions, suspensions or losses of regulatory approvals, recall or seizure of products, operating restrictions, refusal of the government to approve product export applications or allow us to enter into supply contracts, and criminal prosecution.

 

Unless an exemption applies, the FDA requires that a manufacturer introducing a new medical device or a new indication for use of an existing medical device obtain either a Section 510(k) premarket notification clearance or a premarket approval, or PMA, before introducing it into the U.S. market. The type of marketing authorization is generally linked to the classification of the device. The FDA classifies medical devices into one of three classes (Class I, II or III) based on the degree of risk the FDA determines to be associated with a device and the level of regulatory control deemed necessary to ensure the device’s safety and effectiveness.

 

Our products currently marketed in the United States are marketed pursuant to 510(k) pre-marketing clearances and are either Class I or Class II devices. The process of obtaining a Section 510(k) clearance generally requires the submission of performance data and often clinical data, which in some cases can be extensive, to demonstrate that the device is “substantially equivalent” to a device that was on the market before 1976 or to a device that has been found by the FDA to be “substantially equivalent” to such a pre-1976 device, a predecessor device is referred to as “predicate device.” As a result, FDA clearance requirements may extend the development process for a considerable length of time. In addition, in some cases, the FDA may require additional review by an advisory panel, which can further lengthen the process. The PMA process, which is reserved for new devices that are not substantially equivalent to any predicate device and for high-risk devices or those that are used to support or sustain human life, may take several years and requires the submission of extensive performance and clinical information.

 

Medical devices can be marketed only for the indications for which they are cleared or approved. After a device has received 510(k) clearance for a specific intended use, any change or modification that significantly affects its safety or effectiveness, such as a significant change in the design, materials, method of manufacture or intended use, may require a new 510(k) clearance or PMA approval and payment of an FDA user fee. The determination as to whether or not a modification could significantly affect the device’s safety or effectiveness is initially left to the manufacturer using

 

- 18 -


Table of Contents

available FDA guidance; however, the FDA may review this determination to evaluate the regulatory status of the modified product at any time and may require the manufacturer to cease marketing and recall the modified device until 510(k) clearance or PMA approval is obtained. The manufacturer may also be subject to significant regulatory fines or penalties. The FDA is currently reviewing its guidance describing when it believes a manufacturer is obligated to submit a new 510(k) for modifications or changes to a previously cleared device. The FDA is expected to issue revised guidance to assist device manufacturers in making this determination. It is unclear whether the FDA’s approach in this new guidance will result in substantive changes to existing policy and practice regarding the assessment of whether a new 510(k) is required for changes or modifications to existing devices.

 

Any devices we manufacture and distribute pursuant to clearance or approval by the FDA are subject to pervasive and continuing regulation by the FDA and certain state agencies. These include product listing and establishment registration requirements, which help facilitate FDA inspections and other regulatory actions. As a medical device manufacturer, all of our manufacturing facilities are subject to inspection on a routine basis by the FDA. We are required to adhere to applicable regulations setting forth detailed cGMP requirements, as set forth in the QSR, which require, manufacturers, including third-party manufacturers, to follow stringent design, testing, control, documentation and other quality assurance procedures during all phases of the design and manufacturing process. Noncompliance with these standards can result in, among other things, fines, injunctions, civil penalties, recalls or seizures of products, total or partial suspension of production, refusal of the government to grant 510(k) clearance or PMA approval of devices, withdrawal of marketing approvals and criminal prosecutions. We believe that our design, manufacturing and quality control procedures are in compliance with the FDA’s regulatory requirements.

 

We must also comply with post-market surveillance regulations, including medical device reporting, or MDR, requirements which require that we review and report to the FDA any incident in which our products may have caused or contributed to a death or serious injury. We must also report any incident in which our product has malfunctioned if that malfunction would likely cause or contribute to a death or serious injury if it were to recur.

 

Labeling and promotional activities are subject to scrutiny by the FDA and, in certain circumstances, by the Federal Trade Commission. Medical devices approved or cleared by the FDA may not be promoted for unapproved or uncleared uses, otherwise known as “off-label” promotion. The FDA and other agencies actively enforce the laws and regulations prohibiting the promotion of off-label uses, and a company that is found to have improperly promoted off-label uses may be subject to significant liability, including substantial monetary penalties and criminal prosecution.

 

Sales of medical devices outside the United States are subject to regulatory requirements that vary widely from country to country. Approval for sale of our medical devices in Europe is through the CE mark process. Where appropriate, our products are CE marked to the European Union’s Medical Device Directive. Under the CE marketing scheme, our products are classified as either Class I or Class II. Our devices are listed in Australia with the Therapeutic Goods Administration, and in Canada with Health Canada.

 

Other Healthcare Laws

 

Even though we do not submit claims or bill governmental programs and other third-party payers directly for reimbursement for our products sold in the United States, we are still subject to a number of laws and regulations that may restrict our business practices, including, without limitation, anti-kickback, false claims, physician payment transparency and data privacy and security laws. The government has interpreted these laws broadly to apply to the marketing and sales activities of manufacturers and distributors like us.

 

- 19 -


Table of Contents

The federal Anti-Kickback Statute prohibits, among other things, persons or entities from knowingly and willfully soliciting, receiving, offering or providing remuneration, directly or indirectly, in cash or in kind, in exchange for or to induce either the referral of an individual for, or the purchase, lease, order or recommendation of, any good, facility, item or service for which payment may be made, in whole or in part, under federal healthcare programs such as Medicare and Medicaid. In addition, a claim including items or services resulting from a violation of the federal Anti-Kickback Statute constitutes a false or fraudulent claim for purposes of the federal civil False Claims Act.

 

The federal civil False Claims Act prohibits, among other things, any person or entity from knowingly presenting, or causing to be presented, a false or fraudulent claim for payment or approval to the federal government or knowingly making, using or causing to be made or used a false record or statement material to a false or fraudulent claim to the federal government. A claim includes “any request or demand” for money or property presented to the U.S. government. The civil False Claims Act also applies to false submissions that cause the government to be paid less than the amount to which it is entitled, such as a rebate. Intent to deceive is not required to establish liability under the civil False Claims Act.

 

The federal Health Insurance Portability and Accountability Act of 1996, or HIPAA, created federal criminal statutes that prohibit among other actions, knowingly and willfully executing, or attempting to execute, a scheme to defraud any healthcare benefit program, including private third-party payors, knowingly and willfully embezzling or stealing from a healthcare benefit program, willfully obstructing a criminal investigation of a healthcare offense, and knowingly and willfully falsifying, concealing or covering up a material fact or making any materially false, fictitious or fraudulent statement in connection with the delivery of or payment for healthcare benefits, items or services. Like the Anti-Kickback Statute, a person or entity does not need to have actual knowledge of these statutes or specific intent to violate them in order to have committed a violation.

 

Also, many states and countries outside the U.S. have similar fraud and abuse statutes or regulations that may be broader in scope and may apply regardless of payor, in addition to items and services reimbursed under Medicaid and other state programs.

 

Under HIPAA, as amended by the Health Information Technology for Economic and Clinical Health Act of 2009, or HITECH, which we collectively refer to as HIPAA, the Department of Health and Human Services, or HHS, has issued regulations, including the HIPAA Privacy, Security and Breach Notification Rules, to protect the privacy and security of protected health information, or PHI, used or disclosed by covered entities including health care providers and their business associates. HIPAA also regulates standardization of data content, codes and formats used in health care transactions and standardization of identifiers for health plans and providers. Penalties for violations of HIPAA regulations include civil and criminal penalties. In addition to federal privacy and security regulations, there are a number of state laws governing confidentiality and security of health information that are applicable to our business. New laws governing privacy may be adopted in the future as well. Failure to comply with privacy requirements could result in civil or criminal penalties, which could have a materially adverse effect on our business.

 

In some of our operations, such as those involving our cloud-based software digital health applications, we are a business associate under HIPAA and therefore required to comply with the HIPAA Security Rule, Breach Notification Rule and certain provisions of the HIPAA Privacy Rule, and are subject to significant civil and criminal penalties for failure to do so.

 

Numerous other state, federal and foreign laws, including consumer protection laws and regulations, govern the collection, dissemination, use, access to, confidentiality and security of patient health information. In addition, Congress and some states are considering new laws and regulations that

 

- 20 -


Table of Contents

further protect the privacy and security of medical records or medical information. With the recent increase in publicity regarding data breaches resulting in improper dissemination of consumer information, many states have passed laws regulating the actions that a business must take if it experiences a data breach, such as prompt disclosure to affected customers. Generally, these laws are limited to electronic data and make some exemptions for smaller breaches. Congress has also been considering similar federal legislation relating to data breaches. The Federal Trade Commission, or FTC, and states’ Attorneys General have also brought enforcement actions and prosecuted some data breach cases as unfair and/or deceptive acts or practices under the FTC Act. In addition to data breach notification laws, some states have enacted statutes and rules requiring businesses to reasonably protect certain types of personal information they hold or to otherwise comply with certain specified data security requirements for personal information. These laws may apply directly to our business or indirectly by contract when we provide services to other companies. We intend to continue to comprehensively protect all personal information and to comply with all applicable laws regarding the protection of such information.

 

Additionally, there has been a recent trend of increased federal and state regulation of payments and transfers of value provided to healthcare professionals or entities. The Physician Payment Sunshine Act was enacted in law as part of ACA, which imposed new annual reporting requirements on device manufacturers for payments and other transfers of value provided by them, directly or indirectly, to physicians and teaching hospitals, as well as ownership and investment interests held by physicians and their family members. A manufacturer’s failure to submit timely, accurately and completely the required information for all payments, transfers of value or ownership or investment interests may result in civil monetary penalties. Certain states also mandate implementation of commercial compliance programs, impose restrictions on device manufacturer marketing practices and/or require the tracking and reporting of gifts, compensation and other remuneration to healthcare professionals and entities.

 

The shifting commercial compliance environment and the need to build and maintain robust systems to comply with different compliance or reporting requirements in multiple jurisdictions increase the possibility that a healthcare company may fail to comply fully with one or more of these requirements. If our operations are found to be in violation of any of the health regulatory laws described above or any other laws that apply to us, we may be subject to penalties, including potentially significant criminal and civil and administrative penalties, damages, fines, disgorgement, imprisonment, exclusion from participation in government healthcare programs, contractual damages, reputational harm, administrative burdens, diminished profits and future earnings, and the curtailment or restructuring of our operations, any of which could adversely affect our ability to operate our business and our results of operations.

 

Employees

 

As of June 30, 2016, we had approximately 5,250 employees or full-time consultants, of which approximately 1,745 were employed in warehousing and manufacturing, 805 in research and development and 2,700 in sales, marketing and administration. Of our employees and consultants, approximately 1,545 were located in North and Latin America, 1,400 in Australia, 1,280 in Europe and 1,025 in Asia.

 

We believe that the success of our business will depend, in part, on our ability to attract and retain qualified personnel.

 

ITEM 1A RISK FACTORS

 

Before deciding to purchase, hold or sell our common stock, you should carefully consider the risks described below in addition to the other cautionary statements and risks described elsewhere, and the

 

- 21 -


Table of Contents

other information contained, in this Report and in our other filings with the SEC, including our subsequent reports on Forms 10-Q and 8-K. The risks and uncertainties described below are not the only ones we face. Additional risks and uncertainties not presently known to us or that we currently deem immaterial may also affect our business. If any of these known or unknown risks or uncertainties actually occurs with material adverse effects on us, our business, financial condition and results of operations could be seriously harmed. In that event, the market price for our common stock will likely decline, and you may lose all or part of your investment.

 

Our inability to compete successfully in our markets may harm our business.    The markets for our SDB products are highly competitive and are characterized by frequent product improvements and evolving technology. Our ability to compete successfully depends, in part, on our ability to develop, manufacture and market innovative new products. The development of innovative new products by our competitors or the discovery of alternative treatments or potential cures for the conditions that our products treat could make our products noncompetitive or obsolete. Current competitors, new entrants, academics, and others are trying to develop new devices, alternative treatments or cures, and pharmaceutical solutions to the conditions our products treat.

 

Additionally, some of our competitors have greater financial, research and development, manufacturing and marketing resources than we do. The past several years have seen a trend towards consolidation in the healthcare industry and in the markets for our products. Industry consolidation could result in greater competition if our competitors combine their resources, if our competitors are acquired by other companies with greater resources than ours, or if our competitors become affiliated with customers of ours. This competition could increase pressure on us to reduce the selling prices of our products or could cause us to increase our spending on research and development and sales and marketing. If we are unable to develop innovative new products, maintain competitive pricing, and offer products that consumers perceive to be as good as those of our competitors, our sales or gross margins could decrease which would harm our business.

 

Our business depends on our ability to market effectively to dealers of home healthcare products and sleep clinics.    We market our products primarily to home healthcare dealers and to sleep clinics that diagnose OSA and other sleep disorders, as well as to non-sleep specialist physician practices that diagnose and treat sleep disorders. We believe that these groups play a significant role in determining which brand of product a patient will use. The success of our business depends on our ability to market effectively to these groups to ensure that our products are properly marketed and sold by these third-parties.

 

We have limited resources to market to the sleep clinics, home healthcare dealer branch locations and to the non-sleep specialists, most of whom use, sell or recommend several brands of products. In addition, home healthcare dealers have experienced price pressures as government and third-party reimbursement has declined for home healthcare products, and home healthcare dealers are requiring price discounts and longer periods of time to pay for products purchased from us. We cannot assure you that physicians will continue to prescribe our products, or that home healthcare dealers or patients will not substitute competing products when a prescription specifying our products has been written.

 

We have expanded our marketing activities in some markets to target the population with a predisposition to sleep-disordered breathing as well as primary care physicians and various medical specialists. We cannot assure you that these marketing efforts will be successful in increasing awareness or sales of our products.

 

Consolidation in the health care industry could have an adverse effect on our revenues and results of operations.    Many home health care dealers are consolidating which may result in greater concentration of market power. As the health care industry consolidates, competition to provide goods

 

- 22 -


Table of Contents

and services to industry participants may become more intense. These industry participants may try to use their market power to negotiate price concessions or reductions for medical devices and components produced by us. If we are forced to reduce our prices because of consolidation in the health care industry, our revenues may decrease and our consolidated earnings, financial condition, and/or cash flows may suffer.

 

If we are unable to support our continued growth, our business could suffer.    We have experienced rapid and substantial growth. As we continue to grow, the complexity of our operations increases, placing greater demands on our management. Our ability to manage our growth effectively depends on our ability to implement and improve our financial and management information systems on a timely basis and to effect other changes in our business including, the ability to monitor and improve manufacturing systems, information technology, and quality and regulatory compliance systems, among others. Unexpected difficulties during expansion, the failure to attract and retain qualified employees, the failure to successfully replace or upgrade our management information systems, the failure to manage costs or our inability to respond effectively to growth or plan for future expansion could cause our growth to stop. If we fail to manage our growth effectively and efficiently, our costs could increase faster than our revenues and our business results could suffer.

 

If we fail to integrate our recent acquisitions with our operations, our business could suffer.    In fiscal 2016 we completed a number of acquisitions, including among others, the acquisition of Brightree, Curative Medical and Inova Labs. The success of these acquisitions, as well as our other recent acquisitions, will depend, in part, on our ability to successfully integrate the business and operations of the acquired companies and fully realize the anticipated benefits from such acquisitions. Additionally, our management may have their attention diverted while trying to integrate these businesses. If we are not able to successfully integrate the operations, we may not realize the anticipated benefits of the acquisitions fully or at all, or may take longer to realize than expected.

 

We are subject to various risks relating to international activities that could affect our overall profitability.    We manufacture substantially all of our products outside the United States and sell a significant portion of our products in non-U.S. markets. Sales outside North and Latin America accounted for approximately 39% and 43% of our net revenues in the years ended June 30, 2016 and 2015, respectively. We expect that sales within these areas will account for approximately 35% to 40% of our net revenues in the foreseeable future. Our sales and operations outside of the U.S. are subject to several difficulties and risks that are separate and distinct from those we face in the U.S., including:

 

  •  

fluctuations in currency exchange rates;

 

  •  

tariffs and other trade barriers;

 

  •  

compliance with foreign medical device manufacturing regulations;

 

  •  

difficulty in enforcing agreements and collecting receivables through foreign legal systems;

 

  •  

reduction in third-party payor reimbursement for our products;

 

  •  

inability to obtain import licenses;

 

  •  

changes in trade policies and in U.S. and foreign tax policies;

 

  •  

possible changes in export or import restrictions; and

 

  •  

the modification or introduction of other governmental policies with potentially adverse effects.

 

Any of the above factors may have a material adverse effect on our ability to increase or maintain our non-U.S sales.

 

- 23 -


Table of Contents

Government and private insurance plans may not adequately reimburse our customers for our products, which could result in reductions in sales or selling prices for our products.    Our ability to sell our products depends in large part on the extent to which coverage and reimbursement for our products will be available from government health administration authorities, private health insurers and other organizations. These third-party payers are increasingly challenging the prices charged for medical products and services and can, without notice, deny coverage for our products or treatments that may include the use of our products. Therefore, even if a product is approved for marketing, we cannot make assurances that coverage and reimbursement will be available for the product, that the reimbursement amount will be adequate or that the reimbursement amount, even if initially adequate, will not be subsequently reduced. For example, in some markets, such as Spain, France and Germany, government coverage and reimbursement are currently available for the purchase or rental of our products but are subject to constraints such as price controls or unit sales limitations. In other markets, such as Australia, there is currently limited or no reimbursement for devices that treat SDB conditions. As we continue to develop new products, those products will generally not qualify for coverage and reimbursement until they are approved for marketing, if at all.

 

In the United States, we sell our products primarily to home healthcare dealers, hospitals and to sleep clinics. Reductions in reimbursement to our customers by third-party payers, if they occur, may have a material impact on our customers and, therefore, may indirectly affect our pricing and sales to, or the collectability of receivables we have from, those customers. A development negatively affecting reimbursement stems from the Medicare competitive bidding program mandated by the Medicare Prescription Drug, Improvement, and Modernization Act of 2003, or MMA. Under the program, our customers who provide home healthcare services must compete to offer products in designated competitive bidding areas, or CBAs. In addition, under the ACA, in 2016, CMS adjusted the prices in non-competitive bidding areas to match competitive bidding prices. CMS phased in the new rates beginning January 1, 2016, and were fully effective July 1, 2016. This program has significantly reduced the Medicare reimbursement to our customers compared with reimbursement in 2011, at the beginning of the program.

 

We cannot predict at this time the full impact the competitive bidding program and the developments in the competitive bidding program will have on our business and financial condition.

 

Healthcare reform, including recently enacted legislation, may have a material adverse effect on our industry and our results of operations.    In March 2010, the ACA was signed into law in the United States. The ACA made changes that significantly impacted the healthcare industry, including medical device manufacturers. One of the principal purposes of the ACA was to expand health insurance coverage to approximately 32 million Americans who were uninsured. The ACA required adults not covered by an employer- or government-sponsored insurance plan to maintain health insurance coverage or pay a penalty, a provision commonly referred to as the individual mandate. We cannot predict the impact of these coverage expansions, if any, on the sales of our products.

 

The ACA also contained a number of provisions designed to generate the revenues necessary to fund the coverage expansions. This included new fees or taxes on certain health-related industries, including medical device manufacturers. Beginning in 2013, entities that manufacture, produce or import medical devices were required to pay an excise tax in an amount equal to 2.3% of the price for which such devices are sold in the United States. This excise tax is applicable to our products that are primarily used in hospitals and sleep labs, which includes the ApneaLink, VPAP Tx, certain Respiratory Care and dental sleep products. The medical device tax was suspended for 2016 and 2017 calendar years, but is scheduled to return beginning in 2018. In addition to the competitive bidding changes discussed above, the ACA also included, among other things, demonstrations to develop organizations that are paid under a new payment methodology for voluntary coordination of care by groups of providers, such as physicians and hospitals, and the establishment of a new Patient-

 

- 24 -


Table of Contents

Centered Outcomes Research Institute to oversee, identify priorities in and conduct comparative clinical effectiveness research. The increased funding and focus on comparative clinical effectiveness research, which compares and evaluates the risks and benefits, clinical outcomes, effectiveness and appropriateness of products, may result in lower reimbursements by payers for our products and decreased profits to us.

 

Other federal legislative changes have been proposed and adopted since the ACA was enacted. On August 2, 2011, the President signed into law the Budget Control Act of 2011, which, among other things, creates the Joint Select Committee on Deficit Reduction to recommend proposals in spending reductions to Congress. The Joint Select Committee did not achieve a targeted deficit reduction of at least $1.2 trillion for the years 2013 through 2021, triggering the legislation’s automatic reduction to several government programs. This includes aggregate reductions to Medicare payments to providers, including home healthcare companies, of 2% per fiscal year, which went into effect on April 1, 2013 and will remain in effect through 2025 unless additional Congressional action is taken. On January 2, 2013, the American Taxpayer Relief Act of 2012, or the ATRA, was signed into law, which, among other things, further reduced Medicare payments to several providers, including hospitals, and increased the statute of limitations period for the government to recover overpayments to providers from three to five years.

 

Various healthcare reform proposals have also emerged at the state level within the United States.

 

The ACA as well as other federal and/or state healthcare reform measures that may be adopted in the future, singularly or in the aggregate, could have a material adverse effect on our business, financial condition and results of operations.

 

Failure to comply with anti-kickback and fraud regulations could result in substantial penalties and changes in our business operations.    Although we do not provide healthcare services, submit claims for third-party reimbursement, or receive payments directly from Medicare, Medicaid or other third-party payors for our products, we are subject to healthcare fraud and abuse regulation and enforcement by federal, state and foreign governments, which could significantly impact our business. We also are subject to foreign fraud and abuse laws, which vary by country.

 

In the United States, the laws that may affect our ability to operate include, but are not limited to:

 

  •  

the federal Anti-Kickback Statute, which prohibits, among other things, persons and entities from knowingly and willfully soliciting, receiving, offering, or paying remuneration, directly or indirectly, in cash or in kind, in exchange for or to induce either the referral of an individual for, or the purchase, lease, order or recommendation of, any good, facility, item or service for which payment may be made, in whole or in part, under federal healthcare programs such as Medicare and Medicaid. A person or entity does not need to have actual knowledge of this statute or specific intent to violate the Anti-Kickback statute itself to have committed a violation, but a person or entity must have intended to violate the law to be prosecuted under this criminal statute. The U.S. government has interpreted this law broadly to apply to the marketing and sales activities of manufacturers and distributors like us;

 

  •  

federal civil and criminal false claims laws and civil monetary penalty laws, that prohibit, among other things, knowingly presenting, or causing to be presented, claims for payment or approval to the federal government that are false or fraudulent, knowingly making a false statement material to an obligation to pay or transmit money or property to the federal government or knowingly concealing or knowingly and improperly avoiding or decreasing an obligation to pay or transmit money or property to the federal government. These laws may apply to manufacturers and distributors who provide information on coverage, coding, and reimbursement of their products to persons who do bill third-party payers;

 

- 25 -


Table of Contents
  •  

the federal Health Insurance Portability and Accountability Act of 1996, or HIPAA, which created federal criminal laws that prohibit executing a scheme to defraud any healthcare benefit program or making false statements relating to healthcare matters. A person or entity does not need to have actual knowledge of these statutes or specific intent to violate them to have committed a violation;

 

  •  

the federal Physician Sunshine Act requirements under the ACA, which impose new reporting and disclosure requirements on device and drug manufacturers for any “transfer of value” made or distributed by certain manufacturers of drugs, devices, biologics, and medical supplies to physicians (defined to include doctors, dentists, optometrists, podiatrists and chiropractors) and teaching hospitals, and ownership and investment interests held by physicians and their immediate family members.

 

  •  

state and foreign law equivalents of each of the above federal laws, such as state anti-kickback and false claims laws that may apply to items or services reimbursed by any third-party payor, including commercial insurers; state laws that require device companies to comply with the industry’s voluntary compliance guidelines and the relevant compliance guidance promulgated by the federal government, or otherwise restrict payments that may be made to healthcare providers and other potential referral sources; state laws that require device manufacturers to report information related to payments and other transfers of value to physicians and other healthcare providers or marketing expenditures.

 

The scope and enforcement of these laws are uncertain and subject to rapid change in the current environment of healthcare reform, especially in light of the lack of applicable precedent and regulations. Federal and state enforcement bodies have recently increased their scrutiny of interactions between healthcare companies and healthcare providers, which has led to a number of investigations, prosecutions, convictions and settlements in the healthcare industry. For example, in July 2016, we received a federal administrative subpoena from the Office of Inspector General (“OIG”) of the Department of Health and Human Services. The subpoena contains a request for documents and other materials that relate primarily to industry offerings of patient resupply software to home medical equipment providers. We are cooperating with the OIG to respond to its requests for documents and information. Responding to investigations can be time-and resource-consuming and can divert management’s attention from the business. Additionally, as a result of these investigations, healthcare providers and entities may have to agree to additional onerous compliance and reporting requirements as part of a consent decree or corporate integrity agreement. Any such investigation or settlement could increase our costs or otherwise have an adverse effect on our business.

 

If our operations are found to be in violation of any of the laws described above or any other governmental regulations that apply to us now or in the future, we may be subject to penalties, including civil and criminal penalties, damages, fines, disgorgement, exclusion from governmental health care programs, and the curtailment or restructuring of our operations, any of which could adversely affect our ability to operate our business and our financial results.

 

Our use and disclosure of individually identifiable information, including health information, is subject to federal, state and foreign privacy and security regulations, and our failure to comply with those regulations or to adequately secure the information we hold could result in significant liability or reputational harm.    The privacy and security of personally identifiable information stored, maintained, received or transmitted electronically is a major issue in the United States and abroad. While we strive to comply with all applicable privacy and security laws and regulations, as well as our own posted privacy policies, legal standards for privacy, including but not limited to ‘‘unfairness’’ and ‘‘deception,’’ as enforced by the FTC and state attorneys general, continue to evolve and any failure or perceived failure to comply may result in proceedings or actions against us by government entities or others, or could cause us to lose audience and customers, which could have a material adverse effect on our business. Recently, there has been an increase in public

 

- 26 -


Table of Contents

awareness of privacy issues in the wake of revelations about the activities of various government agencies and in the number of private privacy-related lawsuits filed against companies. Concerns about our practices with regard to the collection, use, disclosure, or security of personally identifiable information or other privacy-related matters, even if unfounded and even if we are in compliance with applicable laws, could damage our reputation and harm our business.

 

Numerous foreign, federal and state laws and regulations govern collection, dissemination, use and confidentiality of personally identifiable health information, including (i) state privacy and confidentiality laws (including state laws requiring disclosure of breaches); (ii) HIPAA; and (iii) European and other foreign data protection laws.

 

HIPAA establishes a set of national privacy and security standards for the protection of individually identifiable health information, including what is known as protected health information, by health plans, healthcare clearinghouses and healthcare providers that submit certain covered transactions electronically, or covered entities, and their ‘‘business associates,’’ which are persons or entities that perform certain services for, or on behalf of, a covered entity that involve the use or disclosure of protected health information. Certain portions of our business, such as the cloud-based software digital health applications, are subject to HIPAA as a business associate of our covered entities clients. To provide our covered entity clients with services that involve the use or disclosure of PHI, HIPAA requires us to enter into business associate agreements that require us to safeguard PHI in accordance with HIPAA. As a business associate, we are also directly liable for compliance with HIPAA.

 

Mandatory penalties for HIPAA violations range from $100 to $50,000 per violation, up to $1.5 million per violation of the same standard per calendar year. A single breach incident can result in violations of multiple standards, resulting in possible penalties potentially in excess of $1.5 million. If a person knowingly or intentionally obtains or discloses PHI in violation of HIPAA requirements, criminal penalties may also be imposed.

 

HIPAA authorizes state attorneys general to file suit under HIPAA on behalf of state residents. Courts can award damages, costs and attorneys’ fees related to violations of HIPAA in such cases. While HIPAA does not create a private right of action allowing individuals to sue us in civil court for HIPAA violations, its standards have been used as the basis for a duty of care claim in state civil suits such as those for negligence or recklessness in the misuse or breach of PHI.

 

HIPAA further requires business associates like us to notify our covered entity clients “without unreasonable delay and in no case later than 60 calendar days after discovery of the breach.” Covered entities must notify affected individuals “without unreasonable delay and in no case later than 60 calendar days after discovery of the breach” if their unsecured PHI is subject to an unauthorized access, use or disclosure. If a breach affects 500 patients or more, covered entities must report it to HHS and local media without unreasonable delay, and HHS will post the name of the breaching entity on its public website. If a breach affects fewer than 500 individuals, the covered entity must log it and notify HHS at least annually.

 

If we are unable to properly protect the privacy and security of health information entrusted to us, our solutions may be perceived as not secure, we may incur significant liabilities and customers may curtail their use of or stop using our solutions. In addition, if we fail to comply with the terms of our business associate agreements with our clients, we are liable not only contractually but also directly under HIPAA.

 

Our business activities are subject to extensive regulation, and any failure to comply could have a materially adverse effect on our business, financial condition, or results of operations.    We

 

- 27 -


Table of Contents

are subject to extensive U.S. federal, state, local and international regulations regarding our business activities. Failure to comply with these regulations could result in, among other things, recalls of our products, substantial fines and criminal charges against us or against our employees. Furthermore, our products could be subject to recall if the Food and Drug Administration, or the FDA, other regulators or we determine, for any reason, that our products are not safe or effective. Any recall or other regulatory action could increase our costs, damage our reputation, affect our ability to supply customers with the quantity of products they require and materially affect our operating results.

 

Actual or attempted breaches of security, unauthorized disclosure of information, denial of service attacks or the perception that personal and/or other sensitive or confidential information in our possession is not secure, could result in a material loss of business, substantial legal liability or significant harm to our reputation.    We receive, collect, process, use and store a large amount of information from clients and our own employees, including personally identifiable, protected health and other sensitive and confidential information. This data is often accessed by us through transmissions over public and private networks, including the Internet. The secure transmission of such information over the Internet and other mechanisms is essential to maintain confidence in our information technology systems. We have implemented security measures, technical controls and contractual precautions designed to identify, detect and prevent unauthorized access, alteration, use or disclosure of our and our clients’ and employees’ data. However, there is no guarantee that these measures can provide absolute security. Beyond external criminal activity, systems that access or control access to our services and databases may be compromised as a result of human error, fraud or malice on the part of employees or third parties, or may result from accidental technological failure. Because the techniques used to circumvent security systems can be highly sophisticated and change frequently, often are not recognized until launched against a target and may originate from less regulated and remote areas around the world, we may be unable to proactively address all possible techniques or implement adequate preventive measures for all situations.

 

If someone is able to circumvent or breach our security systems, they could steal any information located therein or cause interruptions to our operations. Security breaches or attempts thereof could also damage our reputation and expose us to a risk of monetary loss and/or litigation, fines and sanctions. We also face risks associated with security breaches affecting third parties that conduct business with us or our clients and others who interact with our data. While we maintain insurance that covers certain security and privacy breaches, we may not carry appropriate insurance or maintain sufficient coverage to compensate for all potential liability.

 

We are subject to diverse laws and regulations relating to data privacy and security, including HIPAA. Complying with these numerous and complex regulations is expensive and difficult, and failure to comply with these regulations could result in regulatory scrutiny, fines and civil liability. In addition, any security breach or attempt thereof could result in liability for stolen assets or information, additional costs associated with repairing any system damage, incentives offered to clients or other business partners to maintain business relationships after a breach, and implementation of measures to prevent future breaches, including organizational changes, deployment of additional personnel and protection technologies, employee training and engagement of third-party experts and consultants. Furthermore, these rules are constantly changing; for example, the US-EU Safe Harbor Framework has been declared invalid and the EU-US Privacy Shield Framework has recently been formally adopted by the European Commission. Additionally, the costs incurred to remediate any data security or privacy incident could be substantial.

 

We cannot assure you that any of our third-party service providers with access to our or our clients and/or employees’ personally identifiable and other sensitive or confidential information will maintain appropriate policies and practices regarding data privacy and security in compliance with all applicable laws or that they will not experience data security breaches or attempts thereof, which could have a corresponding effect on our business.

 

- 28 -


Table of Contents

Product sales, introductions or modifications may be delayed or canceled as a result of FDA regulations or similar foreign regulations, which could cause our sales and profits to decline.    Unless a product is exempt, before we can market or sell a new medical device in the United States, we must obtain FDA clearance or approval, which can be a lengthy and time-consuming process. We generally receive clearance from the FDA to market our products in the United States under Section 510(k) of the Federal Food, Drug, and Cosmetic Act or our products are exempt from the Section 510(k) clearance process. The 510(k) clearance process can be expensive, time-consuming and uncertain. In the 510(k) clearance process, the FDA must determine that a proposed device is “substantially equivalent” to a device legally on the market, known as a “predicate” device, with respect to intended use, technology and safety and effectiveness, in order to clear the proposed device for marketing. The FDA has a high degree of latitude when evaluating submissions and may determine that a proposed device submitted for 510(k) clearance is not substantially equivalent to a predicate device. After a device receives 510(k) premarket notification clearance from the FDA, any modification that could significantly affect its safety or effectiveness, or that would constitute a major change in the intended use of the device, technology, materials, packaging, and certain manufacturing processes may require a new 510(k) clearance or premarket approval. We have modified some of our Section 510(k) approved products without submitting new Section 510(k) notices, which we do not believe were required. However, if the FDA disagrees with us and requires us to submit new Section 510(k) notifications for modifications to our existing products, we may be required to stop marketing the products while the FDA reviews the Section 510(k) notification.

 

Any new product introduction or existing product modification could be subjected to a lengthier, more rigorous FDA examination process. For example, in certain cases we may need to conduct clinical trials of a new product before submitting a 510(k) notice. We may also be required to obtain premarket approvals for certain of our products. Indeed, recent trends in the FDA’s review of premarket notification submissions suggest that the FDA is often requiring manufacturers to provide new, more expansive, or different information regarding a particular device than what the manufacturer anticipated upon 510(k) submission. This has resulted in increasing uncertainty and delay in the premarket notification review process.

 

For example, the FDA is currently reviewing its guidance describing when it believes a manufacturer is obligated to submit a new 510(k) for modifications or changes to a previously cleared device. The FDA is expected to issue revised guidance to assist device manufacturers in making this determination. It is unclear whether the FDA’s approach in this new guidance will result in substantive changes to existing policy and practice regarding the assessment of whether a new 510(k) is required for changes or modifications to existing devices. The FDA’s ongoing review of the 510(k) program may make it more difficult for us to make modifications to our previously cleared products, either by imposing more strict requirements on when a manufacturer must submit a new 510(k) for a modification to a previously cleared product, or by applying more onerous review criteria to such submissions. FDA continues to review its 510(k) clearance process which could result in additional changes to regulatory requirements or guidance documents which could increase the costs of compliance, or restrict our ability to maintain current clearances. The requirements of the more rigorous premarket approval process and/or significant changes to the Section 510(k) clearance process could delay product introductions and increase the costs associated with FDA compliance. Marketing and sale of our products outside the United States are also subject to regulatory clearances and approvals, and if we fail to obtain these regulatory approvals, our sales could suffer. We cannot assure you that any new products we develop will receive required regulatory approvals from U.S. or foreign regulatory agencies.

 

- 29 -


Table of Contents

We are subject to substantial regulation related to quality standards applicable to our manufacturing and quality processes. Our failure to comply with these standards could have an adverse effect on our business, financial condition, or results of operations.    The FDA regulates the approval, manufacturing, and sales and marketing of many of our products in the U.S. Significant government regulation also exists in Canada, Japan, Europe, and other countries in which we conduct business. As a device manufacturer, we are required to register with the FDA and are subject to periodic inspection by the FDA for compliance with the FDA’s Quality System Regulation requirements, which require manufacturers of medical devices to adhere to certain regulations, including testing, quality control and documentation procedures. In addition, the federal Medical Device Reporting regulations require us to provide information to the FDA whenever there is evidence that reasonably suggests that a device may have caused or contributed to a death or serious injury or, if a malfunction were to occur, could cause or contribute to a death or serious injury. Compliance with applicable regulatory requirements is subject to continual review and is rigorously monitored through periodic inspections by the FDA. In the European Community, we are required to maintain certain ISO certifications in order to sell our products and must undergo periodic inspections by notified bodies to obtain and maintain these certifications. Failure to comply with current governmental regulations and quality assurance guidelines could lead to temporary manufacturing shutdowns, product recalls or related field actions, product shortages or delays in product manufacturing. Efficacy or safety concerns, an increase in trends of adverse events in the marketplace, and/or manufacturing quality issues with respect to our products could lead to product recalls or related field actions, withdrawals, and/or declining sales.

 

Laws regulating consumer contacts could adversely affect our business operations or create liabilities.    Our business activities include contacts with consumers in different parts of the world. Certain laws, such as the US Telephone Consumer Protection Act, regulate telemarketing practices and certain automated outbound contacts with consumers, such as phone calls, texts or emails. Our use of outbound contacts may be restricted by existing laws, or by laws, regulations, or regulatory decisions that may be adopted in the future. If we are found to have violated these laws or regulations, we may be subjected to substantial fines, penalties, or liabilities to consumers.

 

Our products are the subject of clinical trials conducted by us, our competitors, or other third parties, the results of which may be unfavorable, or perceived as unfavorable, and could have a material adverse effect on our business, financial condition, and results of operations.    As a part of the regulatory process of obtaining marketing clearance for new products and new indications for existing products, or for other reasons, we conduct and participate in numerous clinical trials with a variety of study designs, patient populations, and trial endpoints. We, our competitors, or other third parties may also conduct clinical trials involving our commercially marketed products. The results of clinical trials may be unfavorable or inconsistent with previous findings, or could identify safety signals associated with our products. For example, in May 2015, we announced the preliminary analysis of the data from the SERVE-HF clinical trial, which was designed to assess whether the treatment of moderate to severe predominant central sleep apnea with Adaptive Servo-Ventilation, or ASV therapy could reduce mortality and morbidity in patients with symptomatic chronic heart failure. The preliminary headline results showed no significant difference with respect to all-cause mortality and hospitalization. However, the analysis of the data identified a statistically significant, 2.5% absolute, increased risk of cardiovascular mortality for those patients in the trial who received ASV therapy with moderate to severe predominant central sleep apnea and symptomatic chronic heart failure with reduced ejection fraction. We worked with global regulatory authorities to revise the labels and instructions for use for ResMed ASV devices as well as informing healthcare providers, physicians, and patients of the cardiovascular safety signal observed in SERVE-HF. Current or future clinical trials may not meet primary endpoints, may reveal disadvantages of our products and solutions for various markets we address, or could generate unfavorable or inconsistent clinical data. Clinical data, or the market’s or regulatory bodies’ perception of the clinical data, may adversely

 

- 30 -


Table of Contents

impact our ability to obtain product clearances or approvals, and our position in, and share of, the markets in which we participate. Moreover, if these clinical trials identify serious safety issues associated with our marketed products, potentially adverse consequences could result, including that regulatory authorities could withdraw clearances or approvals of our products, we could be required to halt the marketing and sales of our products or recall our products, we could be required to update our product labeling with additional warnings, we could be sued and held liable for harm caused to patients, and our reputation may suffer. Any of these could have a material adverse impact on our business, financial condition, and results of operations.

 

Off-label marketing of our products could result in substantial penalties.    The FDA strictly regulates the promotional claims that may be made about FDA-cleared products. In particular, clearance under Section 510(k) only permits us to market our products for the uses indicated on the labeling cleared by the FDA. We may request additional label indications for our current products, and the FDA may deny those requests outright, require additional expensive clinical data to support any additional indications or impose limitations on the intended use of any cleared products as a condition of clearance. If the FDA determines that we have marketed our products for off-label use, we could be subject to fines, injunctions or other penalties. It is also possible that other federal, state or foreign enforcement authorities might take action if they consider our business activities to constitute promotion of an off-label use, which could result in significant penalties, including, but not limited to, criminal, civil and administrative penalties, damages, fines, disgorgement, exclusion from participation in government healthcare programs, and the curtailment of our operations. Any of these events could significantly harm our business and results of operations and cause our stock price to decline.

 

Disruptions in the supply of components from our single source suppliers could result in a significant reduction in sales and profitability.    We purchase uniquely configured components for our devices from various suppliers, including some who are single-source suppliers for us. We cannot assure you that a replacement supplier would be able to configure its components for our devices on a timely basis or, in the alternative, that we would be able to reconfigure our devices to integrate the replacement part. A reduction or halt in supply while a replacement supplier reconfigures its components, or while we reconfigure our devices for the replacement part, would limit our ability to manufacture our devices, which could result in a significant reduction in sales and profitability. We cannot assure you that our inventories would be adequate to meet our production needs during any prolonged interruption of supply.

 

We are subject to potential product liability claims that may exceed the scope and amount of our insurance coverage, which would expose us to liability for uninsured claims.    We are subject to potential product liability claims as a result of the design, manufacture and marketing of medical devices. Any product liability claim brought against us, with or without merit, could result in the increase of our product liability insurance rates. In addition, we would have to pay any amount awarded by a court in excess of our policy limits. Our insurance policies have various exclusions, and thus we may be subject to a product liability claim for which we have no insurance coverage, in which case, we may have to pay the entire amount of any award. We cannot assure you that our insurance coverage will be adequate or that all claims brought against us will be covered by our insurance and we cannot assure you that we will be able to obtain insurance in the future on terms acceptable to us or at all. A successful product liability claim brought against us in excess of our insurance coverage, if any, may require us to pay substantial amounts, which could harm our business.

 

Our intellectual property may not protect our products, and/or our products may infringe on the intellectual property rights of third-parties.    We rely on a combination of patents, trade secrets and non-disclosure agreements to protect our intellectual property. Our success depends, in part, on our ability to obtain and maintain United States and foreign patent protection for our

 

- 31 -


Table of Contents

products, their uses and our processes to preserve our trade secrets and to operate without infringing on the proprietary rights of third-parties. We have a number of pending patent applications, and we do not know whether any patents will issue from any of these applications. We do not know whether any of the claims in our issued patents or pending applications will provide us with any significant protection against competitive products or otherwise be commercially valuable. Legal standards regarding the validity of patents and the proper scope of their claims are still evolving, and there is no consistent law or policy regarding the valid breadth of claims. Additionally, there may be third-party patents, patent applications and other intellectual property relevant to our products and technology which are not known to us and that block or compete with our products. We face the risks that:

 

  •  

third-parties will infringe our intellectual property rights;

 

  •  

our non-disclosure agreements will be breached;

 

  •  

we will not have adequate remedies for infringement;

 

  •  

our trade secrets will become known to or independently developed by our competitors; or

 

  •  

third-parties will be issued patents that may prevent the sale of our products or require us to license and pay fees or royalties in order for us to be able to market some of our products.

 

Litigation may be necessary to enforce patents issued to us, to protect our proprietary rights, or to defend third-party claims that we have infringed on proprietary rights of others. For example, we are involved in litigation with our competitor BMC Medical Co., Ltd., and its U.S. distributor, 3B Medical, to enforce patents against BMC’s and 3B’s alleged infringement in the U.S. and other countries. Similarly, BMC has asserted claims against us in China to enforce claims that we have infringed on its patents. The defense and prosecution of patent claims, including these pending claims, as well as participation in other inter-party proceedings, can be expensive and time-consuming, even in those instances in which the outcome is favorable to us. If the outcome of any litigation or proceeding brought against us were adverse, we could be subject to significant liabilities to third-parties, could be required to obtain licenses from third-parties, could be forced to design around the patents at issue or could be required to cease sales of the affected products. A license may not be available at all or on commercially viable terms, and we may not be able to redesign our products to avoid infringement. Additionally, the laws regarding the enforceability of patents vary from country to country, and we cannot assure you that any patent issues we face will be uniformly resolved, or that local laws will provide us with consistent rights and benefits.

 

We are subject to tax audits by various tax authorities in many jurisdictions.    From time to time we may be audited by tax authorities in various jurisdictions around the world. Any final assessment resulting from such audits may result in material changes to our past or future taxable income, tax payable or deferred tax assets, and may require us to pay penalties and interest that could materially adversely affect our financial results.

 

Our quarterly operating results are subject to fluctuation for a variety of reasons.    Our operating results have, from time to time, fluctuated on a quarterly basis and may be subject to similar fluctuations in the future. These fluctuations may result from a number of factors, including:

 

  •  

the introduction of new products by us or our competitors;

 

  •  

the geographic mix of product sales;

 

  •  

the success and costs of our marketing efforts in new regions;

 

  •  

changes in third-party payor reimbursement;

 

  •  

timing of regulatory clearances and approvals;

 

  •  

timing of orders by distributors;

 

- 32 -


Table of Contents
  •  

expenditures incurred for research and development;

 

  •  

competitive pricing in different regions;

 

  •  

the effect of foreign currency transaction gains or losses; and

 

  •  

other activities of our competitors.

 

Fluctuations in our quarterly operating results may cause the market price of our common stock to fluctuate.

 

If a natural or man-made disaster strikes our manufacturing facilities, we will be unable to manufacture our products for a substantial amount of time and our sales and profitability will decline.    Our facilities and the manufacturing equipment we use to produce our products would be costly to replace and could require substantial lead-time to repair or replace. The facilities may be affected by natural or man-made disasters and in the event they were affected by a disaster, we would be forced to rely on third-party manufacturers. Although we believe we possess adequate insurance for the disruption of our business from causalities, such insurance may not be sufficient to cover all of our potential losses and may not continue to be available to us on acceptable terms, or at all.

 

Delaware law and provisions in our charter and could make it difficult for another company to acquire us.    Provisions of our certificate of incorporation may have the effect of delaying or preventing changes in control or management which might be beneficial to us or our security holders. In particular, our board of directors is divided into three classes, serving for staggered three-year terms. Because of this classification, it will require at least two annual meetings to elect directors constituting a majority of our board of directors. Additionally, our board of directors has the authority to issue up to 2,000,000 shares of preferred stock and to determine the price, rights, preferences, privileges and restrictions, including voting rights, of those shares without further vote or action by the stockholders. The rights of the holders of our common stock will be subject to, and may be adversely affected by, the rights of the holders of any preferred stock that may be issued in the future. The issuance of preferred stock may have the effect of delaying, deferring or preventing a change in control, may discourage bids for our common stock at a premium over the market price of our common stock and may adversely affect the market price of our common stock and the voting and other rights of the holders of our common stock.

 

You may not be able to enforce the judgments of U.S. courts against some of our assets or officers and directors.    A substantial portion of our assets are located outside the United States. Additionally, some of our directors and executive officers reside outside the United States, along with all or a substantial portion of their assets. As a result, it may not be possible for investors to enforce judgments of U.S. courts relating to any liabilities under U.S. securities laws against our assets, those persons or their assets. In addition, investors may not be able to pursue claims based on U.S. securities laws against these assets or these persons in Australian courts, where most of these assets and persons reside.

 

We are increasingly dependent on information technology systems and infrastructure.    Our technology systems are potentially vulnerable to breakdown or other interruption by fire, power loss, system malfunction, unauthorized access and other events. Likewise, data privacy breaches by employees and others with both permitted and unauthorized access to our systems may pose a risk that sensitive data may be exposed to unauthorized persons or to the public, or may be permanently lost. While we have invested heavily in the protection of data and information technology and in related training, there can be no assurance that our efforts will prevent significant breakdowns, breaches in our systems or other cyber incidents that could have a material adverse effect upon the reputation, business, operations or financial condition of the company. In addition, significant implementation issues may arise as we continue to consolidate and outsource certain computer operations and application support activities.

 

- 33 -


Table of Contents

Our results of operations may be materially affected by global economic conditions generally, including conditions in the financial markets.    Recently, concerns over inflation, energy costs, geopolitical issues, the availability and cost of credit, and the ability of sovereign nations to pay their debts have contributed to increased volatility and diminished expectations for the economy and the financial markets going forward. These factors, combined with volatile commodity prices, declining business and consumer confidence and increased unemployment, have precipitated an economic slowdown. It is difficult to predict how long the current economic conditions will continue and whether the economic conditions will continue to deteriorate. If the economic climate in the United States or outside the United States continues to deteriorate or there is a shift in government spending priorities, customers or potential customers could reduce or delay their purchases, which could impact our revenue, our ability to manage inventory levels, collect customer receivables, and ultimately decrease our profitability.

 

Our leverage and debt service obligations could adversely affect our business.    As of June 30, 2016, our total consolidated debt was approximately $1.2 billion. We may incur additional indebtedness in the future. Our indebtedness could have adverse consequences, including:

 

  •  

making it more difficult to satisfy our financial obligations;

 

  •  

increasing our vulnerability to adverse economic, regulatory and industry conditions

 

  •  

limiting our ability to compete and our flexibility in planning for, or reacting to, changes in our business and the industry in which we operate;

 

  •  

limiting our ability to borrow additional funds for working capital, capital expenditure, acquisitions and general corporate or other purposes; and

 

  •  

exposing us to greater interest rate risk.

 

Our debt service obligations will require us to use a portion of our operating cash flow to pay interest and principal in indebtedness, which could impede our growth. Our ability to make payments on, and to refinance, our indebtedness, and to fund capital expenditures will depend on our ability to generate cash in the future. This is subject to general economic, financial, competitive, legislative, regulatory, and other factors, many of which are beyond our control.

 

We have made certain assumptions relating to our recent acquisitions of Brightree, Curative Medical and Inova Labs that may prove to be materially inaccurate.    We have made certain assumptions relating to our recent acquisitions of Brightree, Curative Medical and Inova Labs, including, for example:

 

  •  

projections of the respective acquired companies’ future revenues;

 

  •  

the amount of goodwill and intangibles that will result from the acquisitions;

 

  •  

acquisition costs, including transaction, contingent consideration and integration costs; and

 

  •  

other financial and strategic rationales and risks of the acquisitions.

 

While management has made such assumptions in good faith and believes them to be reasonable, the assumptions may turn out to be materially inaccurate, including for reasons beyond our control. If these assumptions are incorrect we may change or modify our assumptions, such change or modification could have a material adverse effect on our financial condition or results of operations.

 

We may write-off intangible assets, such as goodwill.    We have recorded intangible assets, including goodwill in connection with our recent acquisitions of Brightree, Curative Medical and Inova Labs. At least on an annual basis, we will evaluate whether facts and circumstances indicate

 

- 34 -


Table of Contents

any impairment of the values of these intangible assets. As circumstances change, we cannot assure you that the value of these intangible assets will be realized by us. If we determine that a significant impairment has occurred, we will be required to write-off the impaired portion of intangible assets, which could have a material adverse effect on our results of operations in the period in which the write-off occurs.

 

Prior to our acquisitions of Brightree, Curative Medical and Inova Labs, those companies were each privately-held, and their new obligations of being a part of a public company may require significant resources and management attention.    Upon consummation of the respective acquisitions of Brightree, Curative Medical and Inova Labs, the acquired entities became subsidiaries of our consolidated company, and will need to comply with the Sarbanes-Oxley Act of 2002 and the rules and regulations subsequently implemented by the SEC and the Public Company Accounting Oversight Board. We will need to ensure that each of the acquired companies establishes and maintains effective disclosure controls as well as internal controls and procedures for financial reporting, and such compliance efforts may be costly and may divert the attention of management.

 

ITEM 1B UNRESOLVED STAFF COMMENTS

 

We have received no written comments regarding our periodic or current reports from the staff of the Securities and Exchange Commission that were issued 180 days or more before the end of our fiscal year 2016 that remain unresolved.

 

ITEM 2 PROPERTIES

 

We conduct our operations in both owned and leased properties. Our principal executive offices and U.S. sales facilities, consist of approximately 230,000 square feet and are located on Spectrum Center Boulevard in San Diego, California, in a building we own. We have our primary research and development facilities as well as office and manufacturing facilities at our owned site in Norwest, Sydney, Australia. Warehousing and distribution facilities are leased in Atlanta, Georgia, and Moreno Valley, California, U.S.A.; Abingdon, England; Munich, Bremen, Gemsdorf, Germany; Lyon, Paris, France; Basel, Switzerland; Stockholm, Sweden; Helsinki, Finland; Oslo, Norway; New Delhi, India; Tokyo, Japan; Dublin, Ireland; Beijing, Suzhou, China; the Czech Republic; Denmark and Poland.

 

- 35 -


Table of Contents

We believe that our facilities are adequate to meet the needs of our current business operations. At June 30, 2016, our principal owned and leased properties were as follows:

 

Location    Ownership Status
(Owned / Leased)
   Square footage      Primary Usage
San Diego,
California
   Owned      230,000       Corporate headquarters, sales and administration
Norwest, Sydney,
Australia
   Owned      224,000       Manufacturing , engineering, research and development
Chatsworth,
California
   Leased      72,000       Motor manufacturing, engineering, research and development
Atlanta, Georgia    Leased      470,000       Warehouse and distribution
Atlanta, Georgia    Leased      41,000       Sales and administration, research and development
Moreno Valley,
California
   Leased      130,000       Warehouse and distribution
Loyang,
Singapore
   Leased      95,000       Manufacturing facility
Galaxais,
Singapore
   Leased      7,000       Engineering, research and development
Munich,
Germany
   Leased      119,000       Sales and distribution, research and development
Lyon, France    Leased      52,000       Sales and distribution
Austin, Texas    Leased      43,000       Manufacturing facility for portable oxygen concentrators
Paris, France    Leased      43,000       Manufacturing facility, field service
Johor Bahru,
Malaysia
   Leased      46,000       Manufacturing facility

 

ITEM 3 LEGAL PROCEEDINGS

 

We are involved in various legal proceedings and claims. Litigation is inherently uncertain. Accordingly, we cannot predict the outcome of these matters. But we do not expect the outcome of these matters to have a material adverse effect on our consolidated financial statements when taken as a whole.

 

BMC and 3B litigation.    In 2013, we filed actions in the U.S. and Germany against Chinese manufacturer BMC Medical Co., Ltd and its U.S. distributor, 3B Medical, Inc. to stop the infringement of several ResMed patents. In December 2014, the U.S. International Trade Commission ruled that certain of BMC’s masks infringed ResMed’s patents and should be excluded from importation or sale in the US. BMC subsequently notified the Commission that it discontinued US sales of the mask products affected by the Commission’s order. BMC also appealed the Commission’s ruling. The appeals court has remanded the case to the Commission and further proceedings are expected before the Commission. The Commission has suspended the exclusion order during the pendency of the remand. A companion case in the United States District Court for the Southern District of California remains stayed pending a final decision in the International Trade Commission proceedings.

 

- 36 -


Table of Contents

The International Trade Commission also invalidated claims of the ResMed patent asserted against BMC’s humidifier and declined to exclude BMC’s humidifier products from importation or sale. ResMed initially appealed the International Trade Commission’s ruling, but on March 29, 2016, the appeals court dismissed ResMed’s appeal at ResMed’s request.

 

On May 12, 2016, the International Trade Commission initiated a second investigation of patent infringement by BMC and 3B, based on alleged infringement of four ResMed patents by BMC’s RESmart and Luna flow generators. ResMed also filed a patent infringement suit against BMC and 3B in the United States District Court for the Southern District of California, asserting the same four ResMed patents.

 

In 2013, we initiated proceedings in a Germany against BMC involving certain devices and mask assemblies we accused of patent infringement. In April 2016, ResMed and BMC settled the case against BMC’s infringing mask assemblies, and BMC agreed not to sell infringing products in Germany. ResMed settled its infringement action against BMC’s flow generators in Germany in May 2016. Additional infringement proceedings against BMC flow generators are currently stayed while a validity decision on the same patent is under appeal.

 

In 2015, BMC’s U.S. distributor, 3B Medical, Inc., filed suit in the United States District Court for the Middle District of Florida against ResMed Inc. and ResMed Corp. for alleged federal and state antitrust violations. 3B subsequently named three ResMed customers as additional defendants. 3B alleges that in addition to enforcing its patents, ResMed has entered into exclusive dealing arrangements with customers, tied sales of masks to sales of devices, and spread false information that 3B would go out of business due to ResMed’s patent infringement action. 3B seeks damages and an injunction.

 

In February 2016, BMC filed patent infringement suits in Shanghai, China against ResMed’s distribution subsidiary in China. BMC asserts that ResMed’s S9 devices infringe two BMC patents. ResMed has filed petitions to invalidate the BMC patents. Both proceedings are pending.

 

Administrative subpoena.    In July 2016, we received a federal administrative subpoena from the Office of Inspector General (“OIG”) of the Department of Health and Human Services. The subpoena contains a request for documents and other materials that relate primarily to industry offerings of patient resupply software to home medical equipment providers. We are cooperating with the OIG to respond to its requests for documents and information.

 

ITEM 4 MINE SAFETY DISCLOSURES

 

Not Applicable.

 

- 37 -


Table of Contents

PART II

 


 

ITEM 5 MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

 

Our common stock is traded on the NYSE under the symbol “RMD”. The following table sets forth for the fiscal periods indicated the high and low closing prices for the common stock as reported by the NYSE.

 

     2016      2015  
     High      Low      High      Low  
   

Quarter One, Ended September 30

   $ 57.95       $ 49.43       $ 53.35       $ 48.65   

Quarter Two, Ended December 31

     60.02         51.25         57.39         46.25   

Quarter Three, Ended March 31

     60.36         51.40         72.44         56.65   

Quarter Four, Ended June 30

     64.08         55.64         74.82         55.44   

 

At July 28, 2016, there were 25 holders of record of our common stock, although many of these holders of record own shares as nominees on behalf of other beneficial owners. During fiscal years 2016 and 2015, we paid dividends totaling $168.1 million and $157.3 million, respectively. On July 28, 2016, we announced an increase in the quarterly dividend from $0.30 per share to $0.33 per share. We pay the dividend in U.S. currency to holders of our common stock trading on the NYSE. Holders of CDIs trading on the ASX will receive an equivalent amount in Australian currency based on the exchange rate on the record date and reflecting the 10:1 ratio between CDIs and of common stock traded on the NYSE. We expect the dividend will continue to be unfranked for Australian tax purposes. We expect to fund our dividend commitments with our operating cash flows and existing loan facilities.

 

Securities Authorized for Issuance Under Equity Compensation Plans

 

The information included under Item 12 of Part III of this Report, “Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters,” is hereby incorporated by reference into this Item 5 of Part II of this Report.

 

- 38 -


Table of Contents

Purchases of Equity Securities

 

The following table summarizes purchases by us of our common stock during the fiscal year ending June 30, 2016:

 

Period    Total
Number
of Shares
Purchased
     Average
Price Paid
per Share
     Total Number
of Shares
Purchased(1)
     Maximum Number of
Shares that May Yet Be
Purchased Under the
Programs(1)
 

July 1 - 31, 2015

     0         -         39,186,234         15,529,779   

August 1 - 31, 2015

     445,000         52.92         39,631,234         15,084,779   

September 1 - 30, 2015

     755,000         50.91         40,386,234         14,329,779   

October 1 - 31, 2015

     0         0         40,386,234         14,329,779   

November 1 - 30, 2015

     318,969         58.11         40,705,203         14,010,810   

December 1 - 31, 2015

     381,031         56.52         41,086,234         13,629,779   

January 1 - 31, 2016

     0         0         41,086,234         13,629,779   

February 1 - 28, 2016

     0         0         41,086,234         13,629,779   

March 1 - 31, 2016

     0         0         41,086,234         13,629,779   

April 1 - 30, 2016

     0         0         41,086,234         13,629,779   

May 1 - 31, 2016

     0         0         41,086,234         13,629,779   

June 1 - 30, 2016

     0         0         41,086,234         13,629,779   

Total

     1,900,000       $ 53.71         41,086,234         13,629,779   

 

1. On February 21, 2014, our board of directors approved or current share repurchase program, authorizing us to acquire up to an aggregate of 20 million shares of our common stock. The program allows us to repurchase shares of our common stock from time to time for cash in the open market, or in negotiated or block transactions, as market and business conditions warrant and subject to applicable legal requirements. There is no expiration date for this program, and the program may be accelerated, suspended, delayed or discontinued at any time at the discretion of our board of directors. We have temporarily suspended our share repurchase program due to recent acquisitions. However, we may, at any time, elect to resume the share repurchase program as the circumstances allow. All share repurchases after February 21, 2014 have been executed under this program. During all of our share buyback programs, we have repurchased an aggregate of 41.1 million shares at a total cost of $1.5 billion.

 

- 39 -


Table of Contents

PERFORMANCE GRAPH

 

This performance graph is furnished and shall not be deemed “filed” with the SEC or subject to Section 18 of the Exchange Act, nor shall it be deemed incorporated by reference in any of our filings under the Securities Act of 1933, as amended.

 

The following graph compares the cumulative total stockholders return on our common stock from June 30, 2011 through June 30, 2016, with the comparable cumulative return of the S&P 500 index, the S&P 500 Health Care index, and the Dow Jones US Medical Devices index. The graph assumes that $100 was invested in our common stock and each index on June 30, 2011. In addition, the graph assumes the reinvestment of all dividends paid. The stock price performance on the following graph is not necessarily indicative of future stock price performance.

 

LOGO

 

The following table shows total indexed return of stock price plus reinvestments of dividends, assuming an initial investment of $100 at June 30, 2011, for the indicated periods.

 

Index   June 2011     June 2012     June 2013     June 2014     June 2015     June 2016  
   

ResMed Inc

    100        101        147        167        187        212   

S&P 500

    100        103        122        148        156        159   

S&P 500 Health Care

    100        107        134        171        210        202   

Dow Jones US Medical Devices

    100        98        118        154        182        208   

 

- 40 -


Table of Contents
ITEM 6 SELECTED FINANCIAL DATA

 

The following table summarizes certain selected consolidated financial data for, and as of the end of, each of the fiscal years in the five-year period ended June 30, 2016. The data set forth below should be read together with Item 7 of Part II of this annual report, “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and Item 8 of Part II of this annual report, “Consolidated Financial Statements and Supplementary Data”, and related Notes included elsewhere in this annual report. The consolidated statement of income data for the years ended June 30, 2016, 2015 and 2014 and the consolidated balance sheet data as of June 30, 2016 and 2015 are derived from our audited consolidated financial statements included elsewhere in this annual report. The consolidated statement of income data for the years ended June 30, 2013 and 2012 and the consolidated balance sheet data as of June 30, 2014, 2013 and 2012 are derived from our audited consolidated financial statements. Historical results do not necessarily indicate the results to be expected in the future, and the results for the years presented should not be considered to indicate our future results of operations.

 

   
Consolidated Statement of Income Data   Years Ended June 30,  
(In thousands, except per share data):   2016     2015     2014     2013     2012  

Net revenues

  $ 1,838,713      $ 1,678,912      $ 1,554,973      $ 1,514,457      $ 1,368,515   
Cost of sales (excluding amortization of acquired intangible assets)     772,216        667,516        565,187        573,800        547,780   

Gross profit

    1,066,497        1,011,396        989,786        940,657        820,735   
Selling, general and administrative expenses     488,057        478,627        450,414        430,802        402,621   
Research and development expenses     118,651        114,865        118,226        120,124        109,733   
Restructuring expenses     6,914        -        6,326        -        -   
Education, research and settlement charge     -        -        -        24,765        -   
Amortization of acquired intangible assets     23,923        8,668        9,733        10,142        13,974   

Total operating expenses

    637,545        602,160        584,699        585,833        526,328   

Income from operations

    428,952        409,236        405,087        354,824        294,407   

Other income:

                                       

Interest income, net

    5,654        20,430        25,107        32,486        29,080   

Other, net

    4,960        6,250        884        (2,191     8,458   

Total other income, net

    10,614        26,680        25,991        30,295        37,538   

Income before income taxes

    439,566        435,916        431,078        385,119        331,945   

Income taxes

    87,157        83,030        85,805        77,986        77,095   

Net income

  $ 352,409      $ 352,886      $ 345,273      $ 307,133      $ 254,850   

Basic earnings per share

  $ 2.51      $ 2.51      $ 2.44      $ 2.15      $ 1.75   

Diluted earnings per share

  $ 2.49      $ 2.47      $ 2.39      $ 2.10      $ 1.71   

Dividends per share

  $ 1.20      $ 1.12      $ 1.00      $ 0.68      $ -   

Weighted average:

                                       

Basic shares outstanding

    140,242        140,468        141,474        142,954        145,901   

Diluted shares outstanding

    141,669        142,687        144,359        146,410        149,316   

 

- 41 -


Table of Contents
Consolidated Balance Sheet Data   As of June 30,  
(In thousands):   2016     2015     2014     2013     2012  

Working capital

  $ 781,168      $ 1,141,381      $ 1,286,651      $ 874,800      $ 1,108,299   

Total assets

    3,258,935        2,181,774        2,360,962        2,210,721        2,137,869   

Long-term debt, less current maturities

    875,000        300,594        300,770        769        250,783   

Total stockholders’ equity

  $ 1,694,831      $ 1,587,307      $ 1,758,248      $ 1,610,516      $ 1,607,627   

 

- 42 -


Table of Contents
ITEM 7 MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

 

Overview

 

Management’s discussion and analysis of financial condition and results of operations is intended to help the reader understand the results of operations and financial condition of ResMed Inc and subsidiaries. It is provided as a supplement to, and should be read together with the selected financial data and consolidated financial statements and notes included elsewhere in this report.

 

We are a leading developer, manufacturer and distributor of medical equipment for treating, diagnosing, and managing SDB and other respiratory disorders. During the fiscal year, we continued our efforts to build awareness of the consequences of untreated SDB and to grow our business in this market. In our efforts, we have attempted to raise awareness through market and clinical initiatives and by highlighting the increasing link between the potential effects SDB can have on co-morbidities such as cardiac disease, diabetes, hypertension and obesity.

 

There are many studies being conducted that provide new evidence that treating SDB and OSA can improve health, quality of life and also mitigate the dangers of sleep apnea in occupational health and safety, especially in the transport industry. Evidence continues to mount supporting the role of SDB therapy for disease prevention, improvement of quality of life and healthcare cost reduction.

 

We are committed to ongoing investment in research and development and product enhancements. During fiscal year 2016, we invested approximately $118.7 million on research and development activities, which represents approximately 6% of net revenues. Since the development of CPAP, we have developed a number of innovative products for the treatment of SDB and other respiratory disorders including devices, informatics solutions, diagnostic products, mask systems, headgear and other accessories. During fiscal year 2016, we released new products including the Lumis ST-A, AcuCare high-flow nasal cannula and ResMed Connectivity Module. In addition, through our acquisitions of Inova Labs and Curative Medical we acquired the Inova Labs range of POCs and a portfolio of Curative Medical SDB and ventilation products. In 2016, we introduced a number of new software solutions including our ResMed Resupply, GoScripts and new features and enhancements within our cloud-based software offerings. Through our acquisition of Brightree, we also acquired a suite of software-as-a-service solutions for U.S. based distributors and home health and hospice customers. These products as well as the fiscal 2015 release of AirSenseTM 10, AirCurveTM 10, Lumis and AirViewTM, our cloud-based remote monitoring and therapy management system, and a robust product pipeline, should continue to provide us with a strong platform for future growth.

 

Net revenue in fiscal year 2016 increased to $1,838.7 million, an increase of 10% compared to fiscal year 2015. Gross profit increased for the year ended June 30, 2016 to $1,066.5 million, from $1,011.4 million for the year ended June 30, 2015, an increase of $55.1 million or 5%. Our net income for the year ended June 30, 2016 was $352.4 million or $2.49 per diluted share compared to net income of $352.9 million or $2.47 per diluted share for the year ended June 30, 2015.

 

Total operating cash flow for fiscal year 2016 was $547.9 million and at June 30, 2016, our cash and cash equivalents totaled $731.4 million. At June 30, 2016, our total assets were $3.3 billion and our stockholders’ equity was $1.7 billion. During fiscal year 2016, we repurchased 1.9 million shares at a cost of $102.1 million under our share repurchase program, compared to 2.7 million shares at a cost of $152.6 million during fiscal year 2015. We paid a quarterly dividend of $0.30 per share during fiscal 2016 with a total amount of $168.1 million paid to stockholders.

 

In order to provide a framework for assessing how our underlying businesses performed, excluding the effect of foreign currency fluctuations, we provide certain financial information on a “constant

 

- 43 -


Table of Contents

currency basis”, which is in addition to the actual financial information presented. In order to calculate our constant currency information, we translate the current period financial information using the foreign currency exchange rates that were in effect during the previous comparable period. However, constant currency measures should not be considered in isolation or as an alternative to U.S. dollar measures that reflect current period exchange rates, or to other financial measures calculated and presented in accordance with U.S. generally accepted accounting principles.

 

Fiscal Year Ended June 30, 2016 Compared to Fiscal Year Ended June 30, 2015

 

Net Revenues.    Net revenue for the year ended June 30, 2016 increased to $1,838.7 million from $1,678.9 million for the year ended June 30, 2015, an increase of $159.8 million or 10% (a 13% increase on a constant currency basis). Net revenue for the year ended June 30, 2016 includes revenue of $28.9 million from Brightree’s operations since the closing of our acquisition of Brightree. Excluding revenue attributable to Brightree, net revenue for the year ended June 30, 2016 was $1,809.8 million, an increase of $130.9 million or 8% compared to the year ended June 30, 2015 (an 11% increase on a constant currency basis). The increase in net revenue was attributable to an increase in unit sales of our devices, masks and accessories, partially offset by a decline in average selling prices. Movements in international currencies against the U.S. dollar negatively impacted net revenues by approximately $55.6 million for the year ended June 30, 2016.

 

Net revenue in North and Latin America for the year ended June 30, 2016 increased to $1,130.4 million from $962.7 million for the year ended June 30, 2015, an increase of $167.7 million or 17%. Excluding revenue attributable to Brightree, net revenue in North and Latin America increased for the year ended June 30, 2016 to $1,101.5 million, an increase of $138.8 million or 14%. The increase in net revenue in North and Latin America, excluding revenue attributable to Brightree, is primarily due to an increase in unit sales of our devices, masks and accessories, partially offset by a decline in average selling prices.

 

Net revenue in markets outside North and Latin America decreased for the year ended June 30, 2016 to $708.3 million from $716.2 million for the year ended June 30, 2015, a decrease of $7.9 million or 1% (a 6% increase on a constant currency basis). The constant currency increase in sales outside North and Latin America predominantly reflects an increase in unit sales of our devices, masks and accessories, partially offset by a decline in average selling prices.

 

Net revenue from devices for the year ended June 30, 2016 increased to $1,064.2 million from $975.9 million for the year ended June 30, 2015, an increase of $88.3 million or 9%, including an increase of 19% in North and Latin America and a decrease of 1% outside North and Latin America (a 6% increase on a constant currency basis). Net revenue from masks and other accessories for the year ended June 30, 2016 increased to $745.6 million from $703.0 million for the year ended June 30, 2015, an increase of 6%, including an increase of 10% in North and Latin America and a decrease of 2% outside North and Latin America (a 5% increase on a constant currency basis). Excluding the impact of foreign currency movements, device sales for the year ended June 30, 2016 increased by 13%, and masks and accessories sales increased by 9%, compared to the year ended June 30, 2015.

 

- 44 -


Table of Contents

The following table summarizes the percentage movements in our net revenue, excluding revenue attributable to Brightree following the closing of our acquisition, for the year ended June 30, 2016 compared to the year ended June 30, 2015:

 

     North and Latin
America
    Markets outside
North and
Latin America
    Total     Markets outside
North and
Latin America
(Constant
Currency)*
    Total
(Constant
Currency)*
 

Devices

     19     -1     9     6     13

Masks and other accessories

     10     -2     6     5     9

Total

     14     -1     8     6     11

 

* Constant currency numbers exclude the impact of movements in international currencies.

 

Gross Profit.    Gross profit increased for the year ended June 30, 2016 to $1,066.5 million from $1,011.4 million for the year ended June 30, 2015, an increase of $55.1 million or 5%. Gross profit as a percentage of net revenue was 58.0% for the year ended June 30, 2016, compared with the 60.2% for the year ended June 30, 2015. The decline in gross margins was primarily due to an unfavorable product mix as sales of our lower margin products represented a higher proportion of our sales, declines in our average selling prices and an unfavorable geographic mix with sales in our lower margin geographic areas representing a higher proportion of our overall sales.

 

Selling, General and Administrative Expenses.    Selling, general and administrative expenses increased for the year ended June 30, 2016 to $488.1 million from $478.6 million for the year ended June 30, 2015, an increase of $9.4 million or 2%. The selling, general and administrative expenses, as reported in U.S. dollars, were favorably impacted by the movement of international currencies against the U.S. dollar, which decreased our expenses by approximately $25.6 million. Excluding the impact of foreign currency movements, selling, general and administrative expenses for the year ended June 30, 2016 increased by 7% compared to the year ended June 30, 2015. As a percentage of net revenue, selling, general and administrative expenses for the year ended June 30, 2016 was 26.5%, compared to 28.5% for the year ended June 30, 2015.

 

The increase in selling, general and administrative expenses was primarily due to additional personnel to support our commercial activities, increased legal expenses, acquisition expenses and incremental expenses due to the inclusion of our recent business acquisitions.

 

Research and Development Expenses.    Research and development expenses increased for the year ended June 30, 2016 to $118.7 million from $114.9 million for the year ended June 30, 2015, an increase of $3.8 million or 3%. The research and development expenses were favorably impacted by the depreciation of the Australian dollar and Euro against the U.S. dollar, which decreased our expenses by approximately $13.9 million, as reported in U.S. dollars. Excluding the impact of foreign currency movements, research and development expenses for the year ended June 30, 2016 increased by 15% compared to the year ended June 30, 2015. As a percentage of net revenue, research and development expenses were 6.5% for the year ended June 30, 2016 compared to 6.8% for the year ended June 30, 2015.

 

The increase in research and development expenses in constant currency terms was primarily due to an increase in the number of research and development personnel, an increase in materials and tooling costs incurred to facilitate development of new products and additional expenses associated with the consolidation of recent acquisitions.

 

Restructuring expenses.    During the year ended June 30, 2016 we incurred restructuring expenses of $6.9 million associated with rationalizing our European research & development operations and manufacturing facilities. The restructure cost consisted primarily of severance payments and an asset write-down of a legacy manufacturing facility.

 

- 45 -


Table of Contents

Amortization of Acquired Intangible Assets.    Amortization of acquired intangible assets for the year ended June 30, 2016 totaled $23.9 million compared to $8.7 million for the year ended June 30, 2015. The increase in amortization expense was attributable to our acquisitions during the year, in particular Brightree, Curative Medical and Inova Labs.

 

Total other income, net.    Total other income, net for the year ended June 30, 2016 was $10.6 million, compared with $26.7 million for the year ended June 30, 2015. The decrease in total other income, net, was due primarily to lower interest income resulting from lower interest rates on cash balances held, an increase in interest expense due to higher borrowings and reduced foreign currency hedging gains due to the depreciation of the Australian dollar against the U.S. dollar and Euro.

 

Income Taxes.    Our effective income tax rate increased to 19.8% for the year ended June 30, 2016 from 19.0% for the year ended June 30, 2015. During the year ended June 30, 2016, we adopted the new accounting standard, ASU 2016-09 “Improvements to Employee Share-Based Payment Accounting”. As a result of adopting this standard, we recognized a tax benefit of $11.2 million. The impact of this tax benefit was offset by an additional tax expense relating to an increase in our foreign cash repatriation to the U.S. Our effective income tax rate is affected by the geographic mix of our taxable income, including lower taxes associated with our Singapore and Malaysia manufacturing operations. Our Singapore and Malaysia operations operate under certain tax holidays and tax incentive programs which will expire in whole or in part at various dates through June 30, 2020. As of June 30, 2016, we have not provided for U.S. income taxes for the undistributed earnings of our foreign subsidiaries. We intend for these earnings to be permanently reinvested outside the United States.

 

Net Income and Earnings per Share.    As a result of the factors above, our net income for the year ended June 30, 2016 was $352.4 million compared to net income of $352.9 million for the year ended June 30, 2015. As a result of lower share count due to our stock repurchases during the year ended June 30, 2016, our earnings per share for the year ended June 30, 2016 was $2.49 per diluted share compared to $2.47 per diluted share for the year ended June 30, 2015, an increase of 1% over the year ended June 30, 2015.

 

Fiscal Year Ended June 30, 2015 Compared to Fiscal Year Ended June 30, 2014

 

Net Revenues.    Net revenue increased for the year ended June 30, 2015 to $1,678.9 million from $1,555.0 million for the year ended June 30, 2014, an increase of $123.9 million or 8% (a 13% increase on a constant currency basis). The increase in net revenue was attributable to an increase in unit sales of our devices, masks and accessories, partially offset by a decline in average selling prices. Movements in international currencies against the U.S. dollar negatively impacted net revenues by approximately $74.5 million for the year ended June 30, 2015.

 

Net revenue in North and Latin America increased for the year ended June 30, 2015 to $962.7 million from $839.1 million for the year ended June 30, 2014, an increase of $123.6 million or 15%. The increase in net revenue was primarily attributable to an increase in unit sales of our devices, masks and accessories, partially offset by a decline in average selling prices.

 

Net revenue in markets outside North and Latin America increased for the year ended June 30, 2015 to $716.2 million from $715.8 million for the year ended June 30, 2014, an increase of $0.4 million or 0% (a 10% increase on a constant currency basis). The constant currency increase in sales outside North and Latin America predominantly reflected an increase in unit sales of our devices, masks and accessories, partially offset by a decline in average selling prices.

 

Net revenue from devices for the year ended June 30, 2015 totaled $975.9 million from $846.7 million for the year ended June 30, 2014, an increase of 15%, including an increase of 33% in North

 

- 46 -


Table of Contents

and Latin America and an increase of 2% outside North and Latin America (a 12% increase on a constant currency basis). Net revenue from masks and other accessories for the year ended June 30, 2015 totaled $703.0 million from $708.3 million for the year ended June 30, 2014, a decrease of 1%, including an increase of 1% in North and Latin America and a decrease of 4% outside North and Latin America (a 6% increase on a constant currency basis). Excluding the impact of foreign currency movements, device sales for the year ended June 30, 2015 increased by 21%, and masks and accessories sales increased by 3%, compared to the year ended June 30, 2014.

 

The following table summarizes the percentage movements in our net revenue for the year ended June 30, 2015 compared to the year ended June 30, 2014:

 

     North and
Latin America
    Markets outside
North and
Latin America
    Total     Markets outside
North and
Latin America
(Constant
Currency)*
    Total
(Constant
Currency)*
 

Devices

     33     2     15     12     21

Masks and other accessories

     1     -4     -1     6     3

Total

     15     0     8     10     13

 

* Constant currency numbers exclude the impact of movements in international currencies.

 

Gross Profit.    Gross profit increased for the year ended June 30, 2015 to $1,011.4 million from $989.8 million for the year ended June 30, 2014, an increase of $21.6 million or 2%. Gross profit as a percentage of net revenue was 60.2% for the year ended June 30, 2015, compared with the 63.7% for the year ended June 30, 2014. The decline in gross margins was primarily due to declines in our average selling prices, an unfavorable product mix as sales of our lower margin products represented a higher proportion of our sales, an unfavorable impact from exchange rate movements as a result of the decline in the Euro currency relative to U.S. dollar, and an unfavorable geographic mix.

 

Selling, General and Administrative Expenses.    Selling, general and administrative expenses increased for the year ended June 30, 2015 to $478.6 million from $450.4 million for the year ended June 30, 2014, an increase of $28.2 million or 5%. The selling, general and administrative expenses were favorably impacted by the movement of international currencies against the U.S. dollar, which decreased our expenses by approximately $29.6 million, as reported in U.S. dollars. Excluding the impact of foreign currency movements, selling, general and administrative expenses for the year ended June 30, 2015 increased by 13% compared to the year ended June 30, 2014. As a percentage of net revenue, selling, general and administrative expenses for the year ended June 30, 2015 was 28.5%, compared to 29.0% for the year ended June 30, 2014.

 

The increase in selling, general and administrative expenses was primarily due to additional personnel to support our commercial activities, higher marketing expenditure associated with our recent product releases, an increase in our variable employee compensation costs, the impact of recent acquisitions, donations to the University of California – San Diego and ResMed Foundation, and the release of contingent consideration in the prior year.

 

Research and Development Expenses.    Research and development expenses decreased for the year ended June 30, 2015 to $114.9 million from $118.2 million for the year ended June 30, 2014, a decrease of $3.4 million or 3%. The research and development expenses were favorably impacted by the depreciation of the Australian dollar against the U.S. dollar, which decreased our expenses by approximately $11.0 million, as reported in U.S. dollars. Excluding the impact of foreign currency movements, research and development expenses for the year ended June 30, 2015 increased by 6% compared to the year ended June 30, 2014. As a percentage of net revenue, research and development expenses were 6.8% for the year ended June 30, 2015 compared to 7.6% for the year ended June 30, 2014.

 

- 47 -


Table of Contents

The increase in research and development expenses in constant currency terms was primarily due to an increase in the number of research and development personnel and an increase in materials and tooling costs incurred to facilitate development of new products.

 

Amortization of Acquired Intangible Assets.    Amortization of acquired intangible assets for the year ended June 30, 2015 totaled $8.7 million compared to $9.7 million for the year ended June 30, 2014. The reduction in amortization expense was mainly attributable to certain acquired intangibles reaching the end of their useful life and therefore being fully amortized.

 

Total other income, net.    Total other income, net for the year ended June 30, 2015 was $26.7 million, compared with $26.0 million for the year ended June 30, 2014. The increase in total other income, net, was due primarily due to gains on foreign currency transactions, partially offset by lower interest income resulting from lower interest rates on cash balances held and the depreciation of the Australian dollar against the U.S. dollar.

 

Income Taxes.    Our effective income tax rate was 19.0% for the year ended June 30, 2015 compared to 19.9% for the year ended June 30, 2014. Our effective income tax rate is affected by the geographic mix of our taxable income, including lower taxes associated with our Singapore and Malaysia manufacturing operations. Our Singapore and Malaysia operations operate under certain tax holidays and tax incentive programs which will expire in whole or in part at various dates through June 30, 2020. As of June 30, 2015, we had not provided for U.S. income taxes for the undistributed earnings of our foreign subsidiaries. We intend for these earnings to be permanently reinvested outside the United States.

 

Net Income and Earnings per Share.    As a result of the factors above, our net income for the year ended June 30, 2015 was $352.9 million compared to net income of $345.3 million for the year ended June 30, 2014, an increase of 2% over the year ended June 30, 2014. As a result of the increase in our net income and lower share count due to our stock repurchases, our earnings per share for the year ended June 30, 2015 was $2.47 per diluted share compared to $2.39 per diluted share for the year ended June 30, 2014, an increase of 3% over the year ended June 30, 2014.

 

Liquidity and Capital Resources

 

As of June 30, 2016 and June 30, 2015, we had cash and cash equivalents of $731.4 million and $717.2 million, respectively. Working capital was $0.8 billion and $1.1 billion, at June 30, 2016 and June 30, 2015, respectively. As of June 30, 2016 we had $1.2 billion of borrowings under our revolving credit facility and term loan agreements.

 

As of June 30, 2016 and June 30, 2015, our cash and cash equivalent balances held within the United States amounted to $40.9 million and $32.0 million, respectively. Our remaining cash and cash equivalent balances at June 30, 2016 and June 30, 2015, of $690.5 million and $685.2 million, respectively, were held by our non-U.S. subsidiaries, indefinitely invested outside the United States. Our cash and cash equivalent balances are held at highly rated financial institutions.

 

As of June 30, 2016, the cumulative amount of undistributed earnings from our foreign subsidiaries was approximately $1.2 billion, and those undistributed earnings are considered permanently reinvested. We intend to reinvest the cash and cash equivalents of those entities whose undistributed earnings are permanently reinvested in our international operations. We reassess our reinvestment intentions each reporting period and currently believe that we have sufficient sources of liquidity to support our assertion that the undistributed earnings held by foreign subsidiaries may be considered to be reinvested permanently. If these earnings had not been permanently reinvested, deferred taxes of approximately $286 million would have been recognized in our consolidated financial statements.

 

- 48 -


Table of Contents

We repatriated $190 million and $130 million to the U.S. in fiscal years 2016 and 2015, respectively, from earnings generated in each of those years. The amount of the current year foreign earnings that we have repatriated to the U.S. in the past has been determined, and the amount that we expect to repatriate during fiscal year 2017 will be determined, based on a variety of factors, including current year earnings of our foreign subsidiaries, foreign investment needs and the cash flow needs we have in the U.S., such as for the repayment of debt, dividend distributions, and other domestic obligations. The majority of our repatriation of foreign subsidiaries’ earnings to the U.S. has historically occurred at year-end, although we may repatriate funds earlier in the year based on our business needs, as we did during the year ended June 30, 2016. When we repatriate funds to the U.S., we are required to pay taxes in the U.S. on these amounts based on applicable U.S. tax rates, net of any foreign tax that would be allowed to be deducted or taken as a credit against U.S. income tax. We paid $34.2 million and $17.1 million in additional U.S. federal income taxes in fiscal years 2016 and 2015, respectively, as a result of repatriation of foreign earnings generated in those years.

 

Inventories at June 30, 2016 decreased by $22.4 million or 9% to $224.5 million compared to June 30, 2015 inventories of $246.9 million. The decrease in inventories was due primarily to improved inventory management.

 

Accounts receivable, net of allowance for doubtful accounts, at June 30, 2016 were $382.1 million, an increase of $19.5 million or 5% over the June 30, 2015 accounts receivable balance of $362.6 million. Accounts receivable days sales outstanding of 63 days at June 30, 2016 decreased by 6 days compared to 69 days at June 30, 2015. Our allowance for doubtful accounts as a percentage of total accounts receivable at June 30, 2016 and 2015 was 3.2% and 3.3%, respectively. The credit quality of our customers remains broadly consistent with our past experience.

 

During the year ended June 30, 2016, we generated cash of $547.9 million from operations. This was higher than the cash generated from operations for the year ended June 30, 2015 of $383.2 million, and was primarily due to a reduction in our inventories, an increase in our accounts payable and the impact from the adoption of ASU 2016-09 “Improvements to Employee Share-Based Payment Accounting”, which included, among other things, a requirement to reclassify the excess tax benefits from stock-based compensation arrangements from financing activities to operating activities. This reclassification increased the cash flow from operating activities for the year ended June 30, 2016, by $14.5 million. Movements in foreign currency exchange rates during the year ended June 30, 2016 had the effect of decreasing our cash and cash equivalents by $20.6 million, as reported in U.S. dollars. During fiscal years 2016 and 2015, we repurchased 1.9 million and 2.7 million shares at a cost of $102.1 million and $152.6 million, respectively. During fiscal years 2016 and 2015, we also paid dividends totaling $168.1 million and $157.3 million, respectively.

 

Details of contractual obligations at June 30, 2016 are as follows:

 

          Payments Due by Fiscal Year  
In $000’s   Total     2017     2018     2019     2020     2021     Thereafter  
Short-term debt   $ 300,000      $ 300,000      $ -      $ -      $ -      $ -      $ -   
Interest on Short-Term Debt     4,479        4,479        -        -        -        -        -   
Long Term Debt     875,000        -        -        875,000        -        -        -   
Interest on Long Term Debt     40,606        17,403        17,403        5,800        -        -        -   
Operating Leases     65,873        19,856        15,280        10,142        5,738        3,902        10,955   
Capital Leases     802        338        228        128        108        -        -   
Purchase Obligations     159,279        159,279        -        -        -        -        -   
Total   $ 1,446,039      $ 501,355      $ 32,911      $ 891,070      $ 5,846      $ 3,902      $ 10,955   

 

- 49 -


Table of Contents

Details of other commercial commitments at June 30, 2016 are as follows:

 

            Amount of Commitment Expiration Per Fiscal Year  
In $000’s    Total      2017      2018      2019      2020      2021      Thereafter  

Standby Letter of Credit

   $ 11,877       $ 4,114       $ 6,711       $ -       $ -       $ -       $ 1,052   

Guarantees*

   $ 14,622       $ 797       $ 27       $ 2       $ 45       $ 20       $ 13,731   

Total

   $ 26,499       $ 4,911       $ 6,738       $ 2       $ 45       $ 20       $ 14,783   

 

*These guarantees mainly relate to requirements under contractual obligations with insurance companies transacting with our German subsidiaries and guarantees provided under our facility leasing obligations.

 

Credit Facility

 

On October 31, 2013, we entered into a revolving credit agreement, as borrower, with lenders, including Union Bank, N.A., as administrative agent, joint lead arranger, swing line lender and letters of credit issuer, and HSBC Bank USA, National Association, as syndication agent and joint lead arranger. The credit facility terminates on October 31, 2018, when all unpaid principal and interest under the loans must be repaid. The outstanding principal amount due under the credit facility will bear interest at a rate equal to LIBOR plus 1.0% to 2.0% (depending on the then-applicable leverage ratio). At June 30, 2016, the interest rate that was being charged on the outstanding principal amount was 2.0%. A commitment fee of 0.15% to 0.25% (depending on the then-applicable leverage ratio) applies on the unused portion of the credit facility. The credit facility also includes a $25 million sublimit for letters of credit.

 

In connection with the acquisition of Brightree, we entered into an amendment to our existing revolving credit agreement, on April 4, 2016, to increase the size of the revolving credit facility from $700 million to $1 billion, with an uncommitted option to increase the revolving credit facility by an additional $300 million and make other modifications to provide for the acquisition of Brightree.

 

Our obligations under the revolving credit agreement (as amended) are unsecured but are guaranteed by certain of our direct and indirect U. S. subsidiaries, including ResMed Corp.; ResMed Motor Technologies Inc.; Birdie Inc.; Inova Labs, Inc.; Brightree LLC; Brightree Services LLC; Brightree Home Health & Hospice LLC; and Strategic AR LLC, under an unconditional guaranty. The credit agreement contains customary covenants, including certain financial covenants and an obligation that we maintain certain financial ratios, including a maximum leverage ratio of funded debt to EBITDA (as defined in the credit agreement) and an interest coverage ratio.

 

Part of the proceeds from the funding of the revolving credit facility were used to pay a portion of the acquisition consideration for the Brightree acquisition, as well as to pay fees and expenses in connection with the acquisition, the amendment to the revolving credit agreement and the term loan credit agreement (as described below).

 

At June 30, 2016, we were in compliance with our debt covenants and there was $875.0 million outstanding under the revolving credit facility.

 

Term Loan

 

On April 4, 2016, in connection with the Brightree acquisition, we also entered into a credit agreement (the “term loan credit agreement”) providing a $300 million senior unsecured one-year term loan credit facility.

 

Our obligations under the term loan credit agreement are unsecure but are guaranteed by certain of ResMed’s direct and indirect U.S. subsidiaries, including ResMed Corp., ResMed Motor

 

- 50 -


Table of Contents

Technologies Inc., Birdie Inc., Inova Labs, Inc., Brightree, Brightree Services LLC, Brightree Home Health & Hospice LLC and Strategic AR LLC, under an unconditional guaranty. The term loan credit facility terminates on April 3, 2017, when all unpaid principal and interest under the loans must be repaid. The outstanding principal amount due under the term loan credit facility will bear interest at a rate equal to LIBOR plus 1.0% to 2.0% (depending on the then-applicable leverage ratio). At June 30, 2016, the interest rate that was being charged on the outstanding principal amount was 2.0%. The term loan credit agreement contains customary covenants, including certain financial covenants and an obligation that we maintain certain financial ratios, including a maximum ratio of funded debt to EBITDA (as defined in the term loan credit agreement) and an interest coverage ratio.

 

The proceeds from the funding of the term loan credit facility were used to pay a portion of the acquisition consideration for the Brightree acquisition, as well as to pay fees and expenses in connection with the acquisition, the amendment to the revolving credit agreement and the Term Loan Credit Agreement.

 

At June 30, 2016, we were in compliance with our debt covenants under and there was $300.0 million outstanding under the term loan credit agreement. We plan to refinance the facility prior to the maturity date of the term loan agreement, based on our funding needs at that time.

 

We expect to satisfy all of our liquidity requirements through a combination of cash on hand, cash generated from operations and debt facilities.

 

Tax Expense

 

Our income tax rate is governed by the laws of the jurisdictions where our income is recognized. To date, a substantial portion of our income has been subject to income tax in Australia where the statutory rate was 30% in fiscal years 2016, 2015 and 2014. During fiscal years 2016, 2015 and 2014, our consolidated effective tax rate has fluctuated between 19% and 20%. These and future effective tax rate fluctuations resulted from and depend on numerous factors including the amount of research and development expenditures for which an additional Australian tax credit is available; the level of foreign earnings repatriated to the U.S.; the geographic mix of taxable income and other tax credits and benefits available to us under applicable tax laws, including the lower statutory tax rates and incentives associated with our Singapore and Malaysia manufacturing operations.

 

Critical Accounting Principles and Estimates

 

The preparation of financial statements in conformity with accounting principles generally accepted in the United States requires us to make estimates and judgments that affect our reported amounts of assets and liabilities, revenues and expenses and related disclosures of contingent assets and liabilities. We evaluate our estimates on an ongoing basis, including those estimates related to allowance for doubtful accounts, inventory adjustments, warranty obligations, goodwill, impaired assets, intangible assets, income taxes, deferred tax valuation allowances and stock-based compensation costs.

 

We state these accounting policies in the Notes to the consolidated financial statements and at relevant sections in this discussion and analysis. The estimates are based on the information that is currently available to us and on various other assumptions that we believe to be reasonable under the circumstances. Actual results could vary from those estimates under different assumptions or conditions.

 

We believe that the following critical accounting policies affect the more significant judgments and estimates used in the preparation of our consolidated financial statements:

 

(1)    Allowance for Doubtful Accounts. We maintain an allowance for doubtful accounts for estimated losses resulting from the inability of our customers to make required payments, which

 

- 51 -


Table of Contents

results in bad debt expense. We determine the adequacy of this allowance by periodically evaluating individual customer receivables, considering a customer’s financial condition, credit history and current economic conditions. If the financial condition of our customers were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances may be required.

 

(2)    Inventory Adjustments. Inventories are stated at lower of cost or market and are determined by the first-in, first-out method. We review the components of inventory on a regular basis for excess, obsolete and impaired inventory based on estimated future usage and sales. The likelihood of any material inventory write-downs depends on changes in competitive conditions, new product introductions by us or our competitors, or rapid changes in customer demand.

 

(3)    Valuation of Goodwill, Intangible and Other Long-Lived Assets. We make assumptions in establishing the carrying value, fair value and estimated lives of our goodwill, intangibles and other long-lived assets. The criteria used for these evaluations include management’s estimate of the asset’s continuing ability to generate positive income from operations and positive cash flow in future periods compared to the carrying value of the asset, as well as the strategic significance of any identifiable intangible asset in our business objectives. If assets are considered to be impaired, we recognize as impairment the amount by which the carrying value of the assets exceeds their fair value. We base useful lives and related amortization or depreciation expense on our estimate of the period that the assets will generate revenues or otherwise be used by us. Factors that would influence the likelihood of a material change in our reported results include significant changes in the asset’s ability to generate positive cash flow, loss of legal ownership or title to the asset, a significant decline in the economic and competitive environment on which the asset depends, significant changes in our strategic business objectives, utilization of the asset, and a significant change in the economic and/or political conditions in certain countries.

 

We conducted our annual review for goodwill impairment during the final quarter of fiscal 2016 using a quantitative assessment. The results of our annual review indicated that no impaired goodwill exists as the fair value for each reporting unit exceeded its carrying value.

 

(4)    Income Tax. We assess our income tax positions and record tax benefits for all years subject to audit based upon management’s evaluation of the facts, circumstances and information available at the reporting date. If we determine that it is not more likely than not that we would be able to realize all or part of our net deferred tax assets in the future, an adjustment to the deferred tax assets would be charged to income tax expense in the period such determination is made. Alternatively, if we determine that it is more likely than not that the net deferred tax assets would be realized, any previously provided valuation allowance is reversed. These changes to the valuation allowance and resulting increases or decreases in income tax expense may have a material effect on our operating results.

 

Our income tax returns are based on calculations and assumptions subject to audit by various tax authorities. In addition, the calculation of our tax liabilities involves dealing with uncertainties in the application of complex tax laws. Although currently immaterial, we recognize liabilities for uncertain tax positions based on a two-step process. The first step is to evaluate the tax position for recognition by determining if the weight of available evidence indicates that it is more likely than not that the position will be sustained on audit, including resolution of related appeals or litigation processes, if any. The second step is to measure the tax benefit as the largest amount that is more than 50% likely of being realized upon settlement. While we believe we have appropriate support for the positions taken on our tax returns, we regularly assess the potential outcomes of examinations by tax authorities in determining the adequacy of our provision for income taxes. Based on our regular assessment, we may adjust the income tax provision, income taxes payable and deferred taxes in the period in which the facts that give rise to a revision become known.

 

- 52 -


Table of Contents

(5)    Provision for Warranty. We provide for the estimated cost of product warranties at the time the related revenue is recognized. We determine the amount of this provision by using a financial model, which takes into consideration actual historical expenses and potential risks associated with our different products. We use this financial model to calculate the future probable expenses related to warranty and the required level of the warranty provision. Although we engage in product improvement programs and processes, our warranty obligation is affected by product failure rates and costs incurred to correct those product failures. Should actual product failure rates or estimated costs to repair those product failures differ from our estimates, we would be required to revise our estimated warranty provision.

 

(6)    Revenue Recognition. We generally record revenue on product sales at the time of shipment, which is when title transfers to the customer. We initially defer service revenue received in advance from service contracts and recognize that deferred revenue ratably over the life of the service contract. We initially defer revenue we receive in advance from rental unit contracts and recognize that deferred revenue ratably over the life of the rental contract. Otherwise, we recognize revenue from rental unit contracts ratably over the life of the rental contract. We include in revenue freight charges we bill to customers. We charge all freight-related expenses to cost of sales. Taxes assessed by government authorities that are imposed on and concurrent with revenue-producing transactions, such as sales and value added taxes, are excluded from revenue.

 

We do not normally offer a right of return or other recourse with respect to the sale of our products, other than returns for product defects or other warranty claims. We do not recognize revenues if we offer a right of return or variable sale prices for subsequent events or activities. However, as part of our sales processes we may provide upfront discounts for large orders, one-time special pricing to support new product introductions, sales rebates for centralized purchasing entities or price-breaks for regular order volumes. We record the costs of all such programs as an adjustment to revenue. Our products are predominantly therapy-based equipment and require no installation. Therefore, we have no significant installation obligations. For multiple-element arrangements, we allocate arrangement consideration to the deliverables by use of the relative selling price method. The selling price used for each deliverable is based on vendor-specific objective evidence.

 

We also generate revenue from time-based licensing of our software and associated services. In most instances, revenue is generated under sales agreements with multiple elements comprising subscription fees and professional services, which typically have contract terms of one to three years. We evaluate each element in these multiple-element arrangements to determine whether they represent a separate unit of accounting and recognize each element as the services are performed.

 

(7)    Stock-Based Compensation. We measure the compensation cost of all stock-based awards at fair value on the date of grant. We recognize that value as compensation expense over the service period, net of estimated forfeitures. We estimate the fair value of employee stock options and purchase rights granted using a Black-Scholes valuation model. The fair value of an award is affected by our stock price on the date of grant as well as other assumptions including the estimated volatility of our stock price over the term of the awards, the expected dividend per share and the expected life of the awards. The risk-free interest rate assumption we use is based upon the U.S. Treasury yield curve at the time of grant appropriate for the expected life of the awards. Expected volatilities are based on a combination of historical volatilities of our stock and the implied volatilities from tradeable options of our stock corresponding to the expected term of the options. We use a combination of the historic and

 

- 53 -


Table of Contents

implied volatilities as the addition of the implied volatility is more representative of our future stock price trends. While there is a tradeable market of options on our common stock, less emphasis is placed on the implied volatility of these options due to the relative low volumes of these traded options and the difference in the terms compared to our employee options. In order to determine the estimated period of time that we expect employees to hold their stock options, we use historical rates by employee groups. The estimation of stock awards that will ultimately vest requires judgment, and to the extent actual results differ from our estimates, such amounts will be recorded as a cumulative adjustment in the period estimates are revised. The aforementioned inputs entered into the Black-Scholes valuation model we use to fair value our stock awards are subjective estimates and changes to these estimates will cause the fair value of our stock awards and related stock-based compensation expense we record to vary.

 

We estimate the fair value of restricted stock units based on the market value of the underlying shares as determined at the grant date less the fair value of dividends that holders are not entitled to, during the vesting period. We estimate the weighted average grant date fair value of performance restricted stock units, or PRSUs, which contain a market condition, using a Monte-Carlo simulation valuation model.

 

Recently Issued Accounting Pronouncements

 

See Note 3 – New Accounting Pronouncements to the consolidated financial statements for a description of recently issued accounting pronouncements, including the expected dates of adoption and estimated effects on our results of operations, financial positions and cash flows.

 

Off-Balance Sheet Arrangements

 

As of June 30, 2016, we are not involved in any significant off-balance sheet arrangements, as defined in Item 303(a)(4)(ii) of Regulation S-K promulgated by the SEC.

 

ITEM 7A QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET AND BUSINESS RISKS

 

Foreign Currency Market Risk

 

Our reporting currency is the U.S. dollar, although the financial statements of our non-U.S. subsidiaries are maintained in their respective local currencies. We transact business in various foreign currencies, including a number of major European currencies as well as the Australian dollar. We have significant foreign currency exposure through both our Australian and Singapore manufacturing activities and international sales operations. We have established a foreign currency hedging program using purchased currency options and forward contracts to hedge foreign-currency-denominated financial assets, liabilities and manufacturing cash flows. The goal of this hedging program is to economically manage the financial impact of foreign currency exposures predominantly denominated in euros, Australian dollars and Singapore dollars. Under this program, increases or decreases in our foreign-currency-denominated financial assets, liabilities, and firm commitments are partially offset by gains and losses on the hedging instruments. We do not enter into financial instruments for trading or speculative purposes. The foreign currency derivatives portfolio is recorded in the consolidated balance sheets at fair value and included in Other assets current, Other assets non-current, Accrued expenses and Other liabilities non-current. All movements in the fair value of the foreign currency derivatives are recorded within other income, net, on our consolidated statements of income.

 

- 54 -


Table of Contents

The table below provides information (in U.S. dollars) on our significant foreign-currency-denominated financial assets by legal entity functional currency as of June 30, 2016 (in thousands):

 

     Australian
Dollar
(AUD)
    U.S.
Dollar
(USD)
    Euro
(EUR)
    Canadian
Dollar
(CAD)
     Great
Britain
Pound
(GBP)
     Chinese
Yuan
(CNY)
 

AUD Functional:

                                                  

Assets

     -        274,516        188,840        -         -         8,736   

Liability

     -        (35,625     (110,557     (486      (10,716      (900
   

Foreign Currency Hedges

     -        (237,000     (71,023     -         10,648         (4,515
             

Net Total

     -        1,891        7,260        (486      (68      3,321   

USD Functional:

                                                  

Assets

     -        -        33        15,497         124         -   

Liability

     -        -        (60     (1,284      -         -   
   

Foreign Currency Hedges

     -        -        -        (11,610      -         -   
             

Net Total

     -        -        (27     2,603         124         -   

EURO Functional:

                                                  

Assets

     7        1,429        -        -         1,652         -   

Liability

     -        (6,437     -        -         (51      -   
   

Foreign Currency Hedges

     -        -        -        -         (3,993      -   
             

Net Total

     7        (5,008     -        -         (2,392      -   

GBP Functional:

                                                  

Assets

     -        460        82,654        -         -         -   

Liability

     -        (3,481     (77,606     -         -         -   
   

Foreign Currency Hedges

     -        -        -        -         -         -   
             

Net Total

     -        (3,021     5,048        -         -         -   

SGD Functional :

                                                  

Assets

     1,064        193,931        80,630        -         -         131   

Liability

     (2,166     (54,682     (53,038     -         -         (532
   

Foreign Currency Hedges

     -        (138,000     (24,414     -         -         -   
             

Net Total

     (1,102     1,249        3,178        -         -         (401

 

- 55 -


Table of Contents

The table below provides information about our foreign currency derivative financial instruments and presents the information in U.S. dollar equivalents. The table summarizes information on instruments and transactions that are sensitive to foreign currency exchange rates, including foreign currency call options, collars and forward contracts held at June 30, 2016. The table presents the notional amounts and weighted average exchange rates by contractual maturity dates for our foreign currency derivative financial instruments. These notional amounts generally are used to calculate payments to be exchanged under the options contracts (in thousands, except exchange rates):

 

Foreign Exchange

Contracts

                 

Fair Value

Assets /
(Liabilities)

  FY 2017   FY 2018   FY 2019   Total   June 30,
2016
  June 30,
2015

Receive AUD/Pay USD

                       

Contract amount

  237,000   -   -   237,000   1,262   (649)

Ave. contractual exchange rate

  AUD 1 = USD 0.7396           AUD 1 = USD 0.7396        

Receive AUD/Pay Euro

                       

Contract amount

  115,413   44,390   22,194   181,997   2,325   2,094

Ave. contractual exchange rate

  AUD 1 = Euro 0.6864   AUD 1 = Euro 0.6830   AUD 1 = Euro 0.6443   AUD 1 = Euro 0. 6801        

Receive SGD/Pay Euro

                       

Contract amount

  24,414   -   -   24,414   35   52

Ave. contractual exchange rate

  SGD 1 = Euro 0. 6655           SGD 1 = Euro 0. 6655        

Receive SGD/Pay USD

                       

Contract amount

  138,000   -   -   138,000   792   (276)

Ave. contractual exchange rate

  SGD 1 = USD 0.7378           SGD 1 = USD 0.7378        

Receive GBP/Pay AUD

                       

Contract amount

  10,648   -   -   10,648   (120)   (96)

Ave. contractual exchange rate

  GBP 1 = AUD 0.5505           GBP 1 = AUD 0.5505        

Receive EUR/Pay GBP

                       

Contract amount

  3,993   -   -   3,993   11   (26)

Ave. contractual exchange rate

  EUR 1 = GBP 0.8314           EUR 1 = GBP 0.8314        

Receive AUD/Pay CNY

                       

Contract amount

  4,515   -   -   4,515   (24)   (66)

Ave. contractual exchange rate

  AUD 1 = CNY 5.0030           AUD 1 = CNY 5.0030        

Receive USD/Pay CAD

                       

Contract amount

  11,610   -   -   11,610   (96)   5

Ave. contractual exchange rate

  USD 1 = CAD 1.3028           USD 1 = CAD 1.3028        

 

- 56 -


Table of Contents

Interest Rate Risk

 

We are exposed to risk associated with changes in interest rates affecting the return on our cash and cash equivalents and debt. At June 30, 2016, we held cash and cash equivalents of $731.4 million principally comprising of bank term deposits and at-call accounts and are invested at both short-term fixed interest rates and variable interest rates. At June 30, 2016, we had total borrowings of $1,175.0 million, comprising a revolving credit balance of $875.0 million and a term loan credit balance of $300.0 million, which are subject to variable interest rates. A hypothetical 10% change in interest rates during the year ended June 30, 2016, would not have had a material impact on pretax income. We have no interest rate hedging agreements.

 

ITEM 8 CONSOLIDATED FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

 

The information required by this Item is incorporated by reference to the financial statements set forth in Item 15 of Part IV of this report, “Exhibits and Consolidated Financial Statement Schedules.”

 

  a) Index to Consolidated Financial Statements

 

Report of Independent Registered Public Accounting Firm

     F1   

Consolidated Balance Sheets as of June 30, 2016 and 2015

     F2   

Consolidated Statements of Income for the years ended June 30, 2016, 2015 and 2014

     F3   

Consolidated Statements of Comprehensive Income for the years ended June 30, 2016, 2015 and 2014

     F4   

Consolidated Statements of Stockholders’ Equity for the years ended June 30, 2016, 2015 and 2014

     F5   

Consolidated Statements of Cash Flows for the years ended June 30, 2016, 2015 and 2014

     F6   

Notes to Consolidated Financial Statements

     F7   

Schedule II – Valuation and Qualifying Accounts and Reserves

        

 

  b) Supplementary Data

 

Quarterly Financial Information (unaudited) – The quarterly results for the years ended June 30, 2016 and 2015 are summarized below (in thousands, except per share amounts):

 

2016    First
Quarter
     Second
Quarter
     Third
Quarter
     Fourth
Quarter
     Fiscal Year  

Net revenues

   $ 411,647       $ 454,540       $ 453,879       $ 518,647       $ 1,838,713   

Gross profit

     238,619         266,509         259,880         301,489         1,066,497   

Net income*

     82,916         95,576         90,791         83,126         352,409   
   

Basic earnings per share*

     0.59         0.68         0.65         0.59         2.51   

Diluted earnings per share*

     0.58         0.68         0.64         0.59         2.49   
2015    First
Quarter
     Second
Quarter
     Third
Quarter
     Fourth
Quarter
     Fiscal Year  

Net revenues

   $ 380,399       $ 422,952       $ 422,497       $ 453,064       $ 1,678,912   

Gross profit

     237,313         263,222         251,431         259,430         1,011,396   

Net income

     83,260         91,181         90,983         87,462         352,886   
   

Basic earnings per share

     0.59         0.65         0.65         0.62         2.51   

Diluted earnings per share

     0.58         0.64         0.64         0.61         2.47   

Note: the amounts for each quarter are computed independently, and, due to the computation formula, the sum of the four quarters may not equal the year.

 

* The above amounts have been restated to reflect the adoption of ASU 2016-09 “Improvements to Employee Share-Based Payment Accounting” during the year ended June 30, 2016. Under this standard, we are required to report the impact as though the standard had been adopted on July 1, 2015, the beginning of our fiscal year, and to reflect the tax benefit as a discrete item

 

- 57 -


Table of Contents

within each of the respective interim reporting periods. During the year ended June 30, 2016 we recognized an additional income tax benefit of $11.2 million, which would have previously been recorded as a reduction to Additional Capital. The discrete income tax benefit recognized within each quarter of fiscal year 2016 was $2.5 million, $5.1 million, $2.3 million and $1.2 million, respectively, for each of the quarters ended September 30, 2015, December 31, 2015, March 31, 2016 and June 30, 2016.

 

ITEM 9 CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

 

None.

 

ITEM 9A CONTROLS AND PROCEDURES

 

We maintain disclosure controls and procedures that are designed to ensure that information required to be disclosed in our Exchange Act reports is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms and that such information is accumulated and communicated to our management, including our chief executive officer and chief financial officer, as appropriate, to allow for timely decisions regarding required disclosure. In designing and evaluating the disclosure controls and procedures, management recognizes that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving the desired control objectives, and management is required to apply its judgment in evaluating the cost-benefit relationship of possible controls and procedures.

 

As required by SEC Rule 13a-15(b), we carried out an evaluation, under the supervision and with the participation of our management, including our chief executive officer and chief financial officer, of the effectiveness of the design and operation of our disclosure controls and procedures as of June 30, 2016. Based on the foregoing, our chief executive officer and chief financial officer concluded that our disclosure controls and procedures were effective at the reasonable assurance level as of June 30, 2016.

 

There has been no change in our internal controls over financial reporting during our most recent fiscal quarter that has materially affected, or is reasonably likely to materially affect, our internal controls over financial reporting.

 

- 58 -


Table of Contents

MANAGEMENT’S REPORT ON INTERNAL CONTROL OVER FINANCIAL REPORTING

 

Our management is responsible for establishing and maintaining adequate internal control over financial reporting as defined in Rules 13a-15(f) and 15d-15(f) under the Securities Exchange Act of 1934, as amended. Our internal control over financial reporting is designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles in the United States of America. Our internal control over financial reporting includes those policies and procedures that:

 

  (i) Pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of our assets;

 

  (ii) Provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that our receipts and expenditures are being made only in accordance with authorizations of our management and directors; and

 

  (iii) Provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of our assets that could have a material effect on the financial statements.

 

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

 

Management assessed the effectiveness of our internal control over financial reporting as of June 30, 2016. In making this assessment, management used the framework in Internal Control-Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission. Management’s assessment included an evaluation of the design of our internal control over financial reporting and testing of the operational effectiveness of its internal control over financial reporting. Management reviewed the results of its assessment with the audit committee of our board of directors.

 

Based on that assessment under the framework in Internal Control-Integrated Framework (2013), management concluded that the company’s internal control over financial reporting was effective as of June 30, 2016.

 

KPMG LLP, independent registered public accounting firm, who audited and reported on the consolidated financial statements of ResMed, Inc. included in this report, has issued an attestation report on the effectiveness of internal control over financial reporting.

 

Management’s assessment of the effectiveness of internal control over financial reporting excludes the evaluation of the internal controls over financial reporting of Brightree LLC, which was acquired on April 4, 2016. The amounts excluded from the fiscal year 2016 scope represent $20.9 million of our consolidated total assets as of June 30, 2016 and $28.9 million of our consolidated net revenue for the year ended June 30, 2016.

 

- 59 -


Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

 

The Board of Directors and Stockholders

ResMed Inc.:

 

We have audited ResMed Inc.’s internal control over financial reporting as of June 30, 2016, based on criteria established in Internal Control – Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). ResMed Inc.’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit.

 

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audit also included performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

 

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

 

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

 

In our opinion, ResMed Inc. maintained, in all material respects, effective internal control over financial reporting as of June 30, 2016, based on criteria established in Internal Control – Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO).

 

ResMed Inc. acquired Brightree LLC during fiscal 2016, and management excluded from its assessment of the effectiveness of ResMed Inc.’s internal control over financial reporting as of June 30, 2016, Brightree LLC’s internal control over financial reporting associated with total assets of $20.9 million and total revenues of $28.9 million included in the consolidated financial statements of ResMed Inc. and subsidiaries as of and for the year ended June 30, 2016. Our audit of internal control over financial reporting of ResMed Inc. also excluded an evaluation of the internal control over financial reporting of Brightree LLC.

 

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of ResMed Inc. and subsidiaries as of June 30, 2016 and 2015, and the related consolidated statements of income, comprehensive income, stockholders’ equity, and cash flows for each of the years in the three-year period ended June 30, 2016, and our report dated August 4, 2016 expressed an unqualified opinion on those consolidated financial statements.

 

/s/    KPMG LLP


San Diego, California

August 4, 2016

 

- 60 -


Table of Contents
ITEM 9B OTHER INFORMATION

 

None.

 

- 61 -


Table of Contents

PART III


 

ITEM 10 DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

 

Information required by this Item is incorporated by reference from our definitive proxy statement for our November 16, 2016, annual meeting of stockholders, which will be filed with the Securities and Exchange Commission within 120 days after June 30, 2016.

 

We have filed as exhibits to this annual report on Form 10-K for the year ended June 30, 2016, the certifications of our chief executive officer and chief financial officer required by Section 302 of the Sarbanes-Oxley Act of 2002.

 

ITEM 11 EXECUTIVE COMPENSATION

 

Information required by this Item is incorporated by reference from our definitive proxy statement for our November 16, 2016, annual meeting of stockholders, which will be filed with the Securities and Exchange Commission within 120 days after June 30, 2016.

 

ITEM 12 SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

 

Information required by this Item is incorporated by reference from our definitive proxy statement for our November 16, 2016, annual meeting of stockholders, which will be filed with the Securities and Exchange Commission within 120 days after June 30, 2016.

 

ITEM 13 CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

 

Information required by this Item is incorporated by reference from our definitive proxy statement for our November 16, 2016, annual meeting of stockholders, which will be filed with the Securities and Exchange Commission within 120 days after June 30, 2016.

 

ITEM 14 PRINCIPAL ACCOUNTING FEES AND SERVICES

 

Information required by this Item is incorporated by reference from our definitive proxy statement for our November 16, 2016, annual meeting of stockholders, which will be filed with the Securities and Exchange Commission within 120 days after June 30, 2016.

 

- 62 -


Table of Contents

PART IV


 

ITEM 15 EXHIBITS AND CONSOLIDATED FINANCIAL STATEMENT SCHEDULES

 

The following documents are filed as part of this report:

 

(a)   Consolidated Financial Statements and Schedules – The index to our consolidated financial statements and schedules are set forth in the “Index to Consolidated Financial Statements” under Item 8 of this report.
(b)   Exhibit Lists
2.1   Agreement and Plan of Merger, dated February 19, 2016, by and among ResMed Corp., Eagle Acquisition Sub LLC, Brightree LLC, Shareholder Representative Services LLC and ResMed Inc.(18)**
3.1   First Restated Certificate of Incorporation of ResMed Inc., as amended.(16)
3.2   Fifth Amended and Restated Bylaws of ResMed Inc.(13)
4.1   Form of certificate evidencing shares of Common Stock.(1)
10.1   Licensing Agreement between the University of Sydney and ResMed Ltd dated May 17, 1991, as amended.(1)
10.2*   ResMed Inc. 2006 Incentive Award Plan.(6)
10.3*   Amendment No. 1 to the ResMed Inc. 2006 Incentive Award Plan.(3)
10.4*   2006 Grant agreement for Board of Directors.(3)
10.5*   2006 Grant agreement for Executive Officers.(5)
10.6*   2006 Grant agreement for Australian Executive Officers.(5)
10.7*   Form of Executive Agreement.(4)
10.8*   Amended and Restated 2006 Incentive Award Plan dated November 20, 2008.(7)
10.9   Form of Indemnification Agreements for our directors and officers.(8)
10.10   Form of Access Agreement for directors.(8)
10.11*   Updated Form of Executive Agreement.(2)(12)
10.12   ResMed Inc. 2009 Incentive Award Plan.(9)
10.13   ResMed Inc. 2009 Employee Stock Purchase Plan.(9)
10.14   Amendment No. 1 to the ResMed Inc. 2009 Employee Stock Purchase Plan(14)
10.15   Form of Restricted Stock Award Agreement.(9)
10.16   ResMed Inc. Deferred Compensation Plan.(10)
10.17   Credit Agreement, dated as of October 31, 2013, among ResMed Inc., the lenders Union Bank, N.A., as administrative agent, joint lead arranger, swing line lender and letters of credit issuer and HSBC Bank USA, National Association, as syndication agent and joint lead arranger.(17)

 

- 63 -


Table of Contents
10.18   First Amendment to Credit Agreement dated as of April 4, 2016, by and among ResMed, as borrower, the lenders party thereto, Union Bank, N.A., as administrative agent, joint lead arranger, swing line lender and letter of credit issuer and HSBC Bank USA, National Association, as syndication agent and joint lead arranger.(19)
10.19   Term Loan Credit Agreement dated April 4, 2016, among ResMed Inc, as borrower, the lenders, Union Bank, N.A., as administrative agent, joint lead arranger and joint book runner, HSBC Bank USA, National Association, as joint lead arranger and joint book runner and HSBC Bank Australia Limited, as joint lead arranger and joint book runner.(20)
10.20   Unconditional Guaranty entered into as of April 4, 2016, by each of ResMed Corp., ResMed Motor Technologies Inc., Birdie Inc., Inova Labs, Inc., Brightree LLC, Brightree Services LLC, Brightree Home Health & Hospice LLC and Strategic AR LLC., in favor of Union Bank, N.A., as administrative agent.(21)
10.21   Form of Restricted Stock Unit Award Agreement for Executive Officers.(11)
10.22   Form of Restricted Stock Unit Award Agreement for Directors.(11)
10.23   Form of Stock Option Grant for Executive Officers.(11)
10.24   Form of Stock Option Grant for Directors.(11)
10.25   Form of Performance-Based Restricted Stock Unit Award Agreement for Executive Officers.(15)
21.1   Subsidiaries of the Registrant.(22)
23.1   Consent of Independent Registered Public Accounting Firm.(22)
31.1   Certification of Chief Executive Officer Pursuant to Section 302 of Sarbanes-Oxley Act of 2002.(22)
31.2   Certification of Chief Financial Officer Pursuant to Section 302 of Sarbanes-Oxley Act of 2002.(22)
32.1   Certification of Chief Executive Officer and Chief Financial Officer pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.(22)
101  

The following materials from ResMed Inc.’s Annual Report on Form 10-K for the fiscal year ended June 30, 2016 formatted in Extensible Business Reporting Language (XBRL): (i) the Consolidated Balance Sheets, (ii) the Consolidated Statements of Income, (iii) the Consolidated Statements of Stockholders’ Equity and Comprehensive Income, (iv) the Consolidated Statements of Cash Flows and (v) related notes.

 

* Management contract or compensatory plan or arrangement

** Exhibits and schedules have been omitted as authorized by Item 601(b)(2) of Regulation S-K. The Registrant will supplementally furnish copies of any of the omitted exhibits and schedules if the SEC requests; provided, however, that the Registrant may request confidential treatment for any exhibits or schedules it furnishes, under Rule 24b-2 of the Exchange Act.

(1) Incorporated by reference to the Registrant’s Registration Statement on Form S-1 (No. 33-91094) declared effective on June 1, 1995.

(2) Incorporated by reference to the Registrant’s Report on Form 10-K for the year ended June 30, 2009.

(3) Incorporated by reference to the Registrant’s Report on Form 10-Q for the quarter ended December 31, 2006.

(4) Incorporated by reference to the Registrant’s Report on Form 8-K filed on July 13, 2007.

(5) Incorporated by reference to the Registrant’s Report on Form 10-K for the year ended June 30, 2007.

(6) Incorporated by reference to the Registrant’s Report on Form 8-K filed on November 15, 2006.

(7) Incorporated by reference to Appendix A of the Registrant’s Definitive Proxy Statement filed on October 15, 2008.

(8) Incorporated by reference to the Registrant’s Report on Form 8-K filed on June 24, 2009.

(9) Incorporated by reference to the Registrant’s Report on Form 8-K filed on November 23, 2009.

(10) Incorporated by reference to the Registrant’s Report on Form 8-K filed on May 25, 2010.

 

- 64 -


Table of Contents

(11) Incorporated by reference to the Registrant’s Report on Form 10-Q for the quarter ended September 30, 2011.

(12) Incorporated by reference to the Registrant’s Report on Form 8-K filed on July 2, 2012.

(13) Incorporated by reference to the Registrant’s Report on Form 8-K/A filed on September 17, 2012.

(14) Incorporated by reference to Appendix A of the Registrant’s Definitive Proxy Statement filed on October 4, 2012.

(15) Incorporated by reference to the Registrant’s Report on Form 8-K filed on November 21, 2012.

(16) Incorporated by reference to Exhibit 3.1 to the Registrant’s Report on Form 10-Q for the quarter ended September 30, 2013

(17) Incorporated by reference to Exhibits 10.1 and 10.2 to the Registrant’s Report on Form 8-K filed on November 5, 2013

(18) Incorporated by reference to Exhibit 2.1 to the Registrant’s Report on Form 8-K filed on February 22, 2016.

(19) Incorporated by reference to Exhibit 10.1 to the Registrant’s Report on Form 8-K filed on April 4, 2016.

(20) Incorporated by reference to Exhibit 10.2 to the Registrant’s Report on Form 8-K filed on April 4, 2016.

(21) Incorporated by reference to Exhibit 10.3 to the Registrant’s Report on Form 8-K filed on April 4, 2016.

(22) Filed with this report.

 

- 65 -


Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

 

The Board of Directors and Stockholders

ResMed Inc.:

 

We have audited the accompanying consolidated balance sheets of ResMed Inc. (and subsidiaries) as of June 30, 2016 and 2015, and the related consolidated statements of income, comprehensive income stockholders’ equity, and cash flows for each of the years in the three-year period ended June 30, 2016. In connection with our audits of the consolidated financial statements, we also have audited financial statement Schedule II. These consolidated financial statements and financial statement schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements and financial statement schedule based on our audits.

 

We conducted our audits in accordance with generally accepted auditing standards as established by the Auditing Standards Board (United States) and in accordance with the auditing standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

 

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of ResMed Inc. and subsidiaries as of June 30, 2016 and 2015, and the results of their operations and their cash flows for each of the years in the three-year period ended June 30, 2016, in conformity with U.S. generally accepted accounting principles. Also in our opinion, the related financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.

 

As discussed in note 3 to the consolidated financial statements, the Company has adopted, on a retrospective basis, FASB Accounting Standards Update No. 2015-17, Balance Sheet Classification of Deferred Taxes, and has classified all deferred tax assets, liabilities and associated allowances as non-current. The Company has also adopted FASB Accounting Standards Update No. 2016-09, Improvements to Employee Share-Based Payment Accounting, and has recorded all excess tax benefits and tax deficiencies as an income tax benefit or expense in the income statement effective July 1, 2015.

 

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the Company’s internal control over financial reporting as of June 30, 2016, based on criteria established in Internal Control-Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO), and our report dated August 4, 2016, expressed an unqualified opinion on the effectiveness of the internal control over financial reporting of ResMed Inc.

 

/s/ KPMG LLP


San Diego, California

August 4, 2016

 

- F1 -


Table of Contents

RESMED INC. AND SUBSIDIARIES

Consolidated Balance Sheets

June 30, 2016 and 2015

(In thousands, except share and per share data)

 

     June 30,
2016


    June 30,
2015


 

Assets

                

Current assets:

                

Cash and cash equivalents

   $ 731,434      $ 717,249   

Accounts receivable, net of allowance for doubtful accounts of $12,555 and $12,276 at June 30, 2016 and June 30, 2015, respectively

     382,086        362,568   

Inventories (note 5)

     224,456        246,859   

Prepaid expenses and other current assets

     81,743        81,168   
    


Total current assets

     1,419,719        1,407,844   
    


Non-current assets:

                

Property, plant and equipment, net (note 6)

     384,276        387,758   

Goodwill (note 7)

     1,059,245        264,261   

Other intangible assets, net (note 7)

     299,808        47,142   

Deferred income taxes (note 14)

     55,496        46,380   

Other assets

     40,391        28,389   
    


Total non-current assets

     1,839,216        773,930   
    


Total assets

   $ 3,258,935      $ 2,181,774   
    


Liabilities and Stockholders’ Equity

                

Current liabilities:

                

Accounts payable

   $ 92,571      $ 81,112   

Accrued expenses (note 9)

     156,805        132,976   

Deferred revenue

     50,009        36,097   

Income taxes payable

     39,166        16,278   

Short-term debt (note 11)

     300,000        -   
    


Total current liabilities

     638,551        266,463   
    


Non-current liabilities:

                

Deferred revenue

     40,281        19,284   

Income taxes payable

     -        1,754   

Deferred income taxes (note 14)

     9,061        6,372   

Other long-term liabilities

     1,211        -   

Long-term debt (note 11)

     875,000        300,594   
    


Total non-current liabilities

     925,553        328,004   
    


Total liabilities

     1,564,104        594,467   
    


Commitments and contingencies (notes 18 and 19)

                

Stockholders’ equity: (note 12)

                

Preferred stock, $0.01 par value, 2,000,000 shares authorized; none issued

     -        -   

Common stock, $0.004 par value, 350,000,000 shares authorized; 181,747,157 issued and 140,660,923 outstanding at June 30, 2016 and 179,660,939 issued and 140,474,705 outstanding at June 30, 2015

     563        562   

Additional paid-in capital

     1,303,238        1,228,795   

Retained earnings

     2,160,299        1,976,020   

Treasury stock, at cost, 41,086,234 shares at June 30, 2016, and 39,186,234 shares at June 30, 2015

     (1,546,611     (1,444,554

Accumulated other comprehensive (loss) income

     (222,658     (173,516
    


Total stockholders’ equity

     1,694,831        1,587,307   
    


Total liabilities and stockholders’ equity

   $ 3,258,935      $ 2,181,774   
    


 

See accompanying notes to consolidated financial statements.

 

- F2 -


Table of Contents

RESMED INC. AND SUBSIDIARIES

Consolidated Statements of Income

Years Ended June 30, 2016, 2015 and 2014

(In thousands, except per share data)

 

     June 30,
2016


    June 30,
2015


    June 30,
2014


 

Net revenue

   $ 1,838,713      $ 1,678,912      $ 1,554,973   

Cost of sales (excluding amortization of acquired intangible assets)

     772,216        667,516        565,187   
    


Gross profit

     1,066,497        1,011,396        989,786   
    


Operating expenses:

                        

Selling, general and administrative

     488,057        478,627        450,414   

Research and development

     118,651        114,865        118,226   

Restructuring expenses (note 23)

     6,914        -        6,326   

Amortization of acquired intangible assets

     23,923        8,668        9,733   
    


Total operating expenses

     637,545        602,160        584,699   
    


Income from operations

     428,952        409,236        405,087   
    


Other income, net:

                        

Interest income

     16,860        26,208        31,236   

Interest expense

     (11,206     (5,778     (6,129

Other, net (note 13)

     4,960        6,250        884   
    


Total other income, net

     10,614        26,680        25,991   
    


Income before income taxes

     439,566        435,916        431,078   

Income taxes (note 14)

     87,157        83,030        85,805   
    


Net income

   $ 352,409      $ 352,886      $ 345,273   
    


Basic earnings per share

   $ 2.51      $ 2.51      $ 2.44   

Diluted earnings per share (note 4)

   $ 2.49      $ 2.47      $ 2.39   

Dividend declared per share

   $ 1.20      $ 1.12      $ 1.00   

Basic shares outstanding (000’s)

     140,242        140,468        141,474   

Diluted shares outstanding (000’s)

     141,669        142,687        144,359   

 

See accompanying notes to consolidated financial statements.

 

- F3 -


Table of Contents

RESMED INC. AND SUBSIDIARIES

Consolidated Statements of Comprehensive Income

Years Ended June 30, 2016, 2015 and 2014

(In US$ thousands)

 

     Years Ended June 30,

 
     2016

    2015

    2014

 

Net income

   $ 352,409      $ 352,886      $ 345,273   

Other comprehensive (loss) income:

                        

Foreign currency translation (loss) gain adjustments

     (49,142     (325,073     59,469   
    


Comprehensive income

   $ 303,267      $ 27,813      $ 404,742   
    


 

See accompanying notes to consolidated financial statements.

 

- F4 -


Table of Contents

RESMED INC. AND SUBSIDIARIES

Consolidated Statements of Stockholders’ Equity

Years ended June 30, 2016, 2015 and 2014

(In thousands)

 

   

 

Common Stock

    Additional
Paid-in
Capital
   

 

Treasury Stock

    Retained
Earnings
    Accumulated
Other
Comprehensive
Income (Loss)
    Total  
    Shares     Amount       Shares     Amount        

Balance, June 30, 2013

    174,039      $  568      $  1,025,064        (32,026   $ (1,083,845   $  1,576,641      $ 92,088      $  1,610,516   

Common stock issued on exercise of options (note 12)

    1,681        7        31,157                                        31,164   

Common stock issued on vesting of restricted stock units, net of shares withheld for tax (note 12)

    713        3        (11,302                                     (11,299

Common stock issued on employee stock purchase plan (note 12)

    314        1        13,052                                        13,053   

Treasury stock purchases

            (18             (4,416     (208,065                     (208,083

Tax benefit from exercise of options

                    16,211                                        16,211   

Stock-based compensation costs

                    43,462                                        43,462   

Other comprehensive income

                                                    59,469        59,469   

Net income

                                            345,273                345,273   

Dividends declared

                                            (141,518             (141,518
                                                                 
                                                                 

Balance, June 30, 2014

    176,747      $ 561      $ 1,117,644        (36,442   $ (1,291,910   $ 1,780,396      $ 151,557      $ 1,758,248   

Common stock issued on exercise of options (note 12)

    1,954        8        36,565                                        36,573   

Common stock issued on vesting of restricted stock units, net of shares withheld for tax (note 12)

    651        3        (11,406                                     (11,403

Common stock issued on employee stock purchase plan (note 12)

    309        1        13,412                                        13,413   

Treasury stock purchases

            (11             (2,744     (152,644                     (152,655

Tax benefit from exercise of options

                    24,868                                        24,868   

Stock-based compensation costs

                    47,712                                        47,712   

Other comprehensive income

                                                    (325,073     (325,073

Net income

                                            352,886                352,886   

Dividends declared

                                            (157,262             (157,262
                                                                 
                                                                 

Balance, June 30, 2015

    179,661      $ 562      $ 1,228,795        (39,186   $ (1,444,554   $ 1,976,020      $ (173,516   $ 1,587,307   

Common stock issued on exercise of options (note 12)

    1,176        5        26,247                                        26,252   

Common stock issued on vesting of restricted stock units, net of shares withheld for tax (note 12)

    619        3        (12,388                                     (12,385

Common stock issued on employee stock purchase plan (note 12)

    291        1        14,081                                        14,082   

Treasury stock purchases

            (8             (1,900     (102,057                     (102,065

Tax benefit from exercise of options

                                                            -   

Stock-based compensation costs

                    46,503                                        46,503   

Other comprehensive income

                                                    (49,142     (49,142

Net income

                                            352,409                352,409   

Dividends declared

                                            (168,130             (168,130
                                                                 
                                                                 

Balance, June 30, 2016

    181,747      $ 563      $ 1,303,238        (41,086   $ (1,546,611   $ 2,160,299      $ (222,658   $ 1,694,831   

 

See accompanying notes to consolidated financial statements.

 

- F5 -


Table of Contents

RESMED INC. AND SUBSIDIARIES

Consolidated Statements of Cash Flows

Years ended June 30, 2016, 2015 and 2014

(In thousands)

 

     June 30,
2016
    June 30,
2015
    June 30,
2014
 
    


Cash flows from operating activities:

                        

Net income

   $ 352,409      $ 352,886      $ 345,273   

Adjustment to reconcile net income to net cash provided by operating activities:

                        

Depreciation and amortization

     86,849        73,056        73,454   

Stock-based compensation costs

     46,408        47,855        43,457   

Impairment of long lived assets

     2,815        -        -   

Impairment of cost-method investments

     750        -        -   

Changes in fair value of business combination contingent consideration

     (2,986     (132     (6,283

Gain on disposal of business

     -        (709     -   

Excess tax benefit from stock-based compensation arrangements

     -        (24,959     (16,335

Changes in operating assets and liabilities, net of effect of acquisitions:

                        

Accounts receivable, net

     (27,307     (28,259     (35,108

Inventories, net

     30,492        (99,524     (15,851

Prepaid expenses, net deferred income taxes and other current assets

     12,121        (22,849     5,814   

Accounts payable, accrued expenses and other liabilities

     46,382        85,815        (3,153
    


Net cash provided by operating activities

     547,933        383,180        391,268   
    


Cash flows from investing activities:

                        

Purchases of property, plant and equipment

     (58,534     (62,502     (72,722

Patent registration costs

     (9,295     (9,442     (8,434

Business acquisitions, net of cash acquired

     (1,041,864     (29,407     (3,852

Investments in cost-method investments

     (8,965     (10,750     (10,850

Proceeds from disposal of cost-method investments

     468        937        -   

Purchases of foreign currency contracts

     -        (700     (1,477

(Payment)/proceeds on maturity of foreign currency contracts

     (7,564     (31,207     2,348   
    


Net cash used in investing activities

     (1,125,754     (143,071     (94,987
    


Cash flows from financing activities:

                        

Proceeds from issuance of common stock, net

     27,694        38,806        33,354   

Excess tax benefit from stock-based compensation arrangements

     -        24,959        16,335   

Purchases of treasury stock

     (102,058     (160,300     (202,169

Payment of business combination contingent consideration

     (1,228     (458     (1,117

Proceeds from borrowings, net of borrowing costs

     1,140,000        180,000        557,834   

Repayment of borrowings

     (283,694     (181,536     (560,035

Dividends paid

     (168,130     (157,262     (141,518
    


Net cash used in financing activities

     612,584        (255,791     (297,316
    


Effect of exchange rate changes on cash

     (20,578     (172,799     30,717   
    


Net (decrease) increase in cash and cash equivalents

     14,185        (188,481     29,682   

Cash and cash equivalents at beginning of period

     717,249        905,730        876,048   
    


Cash and cash equivalents at end of period

   $ 731,434      $ 717,249      $ 905,730   
    


Supplemental disclosure of cash flow information:

                        

Income taxes paid, net of refunds

   $ 68,966      $ 48,533      $ 90,183   

Interest paid

   $ 11,206      $ 5,778      $ 6,129   
    


Fair value of assets acquired, excluding cash

   $ 338,353      $ 20,408      $ 2,257   

Liabilities assumed

     (79,808     (8,528     (829

Goodwill on acquisition

     796,306        20,947        3,227   

Deferred payments

     120        (1,703     (803

Fair value of contingent consideration

     (13,107     (1,717     -   
    


Cash paid for acquisition

   $ 1,041,864      $ 29,407      $ 3,852   
    


 

See accompanying notes to consolidated financial statements.

 

- F6 -


Table of Contents

RESMED INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

 

(1)   Organization and Basis of Presentation

 

ResMed Inc. (referred to herein as “we”, “us”, “our” or the “Company”) is a Delaware corporation formed in March 1994 as a holding company for the ResMed Group. Through our subsidiaries, we design, manufacture and market equipment for the diagnosis and treatment of sleep-disordered breathing and other respiratory disorders, including obstructive sleep apnea. Our manufacturing operations are located in Australia, Singapore, Malaysia, France and the United States. Major distribution and sales sites are located in the United States, Germany, France, the United Kingdom, Switzerland, Australia, Japan, Norway and Sweden.

 

(2)   Summary of Significant Accounting Policies

 

  (a) Basis of Consolidation

 

The consolidated financial statements include the accounts of the Company and its wholly owned subsidiaries. All significant inter-company transactions and balances have been eliminated in consolidation.

 

The preparation of financial statements in conformity with accounting principles generally accepted in the United States requires management estimates and assumptions that affect amounts reported in the consolidated financial statements and accompanying notes. Actual results could differ from management’s estimates.

 

  (b) Revenue Recognition

 

We generally record revenue on product sales at the time of shipment, which is when title transfers to the customer. We do not record revenue on product sales which require customer acceptance until we receive acceptance. We initially defer service revenue received in advance from service contracts and recognize that deferred revenue ratably over the life of the service contract. We initially defer revenue we receive in advance from rental unit contracts and recognize that deferred revenue ratably over the life of the rental contract. Otherwise, we recognize revenue from rental unit contracts ratably over the life of the rental contract. We include in revenue freight charges we bill to customers. We charge all freight-related expenses to cost of sales. Taxes assessed by government authorities that are imposed on and concurrent with revenue-producing transactions, such as sales and value added taxes, are excluded from revenue.

 

We do not recognize revenues to the extent that we offer a right of return or other recourse with respect to the sale of our products, other than returns for product defects or other warranty claims, nor do we recognize revenues if we offer variable sale prices for subsequent events or activities. However, as part of our sales processes we may provide upfront discounts for large orders, one-time special pricing to support new product introductions, sales rebates for centralized purchasing entities or price-breaks for regular order volumes. We record the costs of all such programs as an adjustment to revenue. Our products are predominantly therapy-based equipment and require no installation. Therefore, we have no installation obligations. For multiple-element arrangements, we allocate arrangement consideration to the deliverables by use of the relative selling price method. The selling price used for each deliverable is based on vendor–specific objective evidence.

 

We also generate revenue from time-based licensing of our software and associated services. In most instances, revenue is generated under sales agreements with multiple elements comprising subscription fees and professional services, which typically have contract terms of one to three years. We evaluate each element in these multiple-element arrangements to determine whether they represent a separate unit of accounting and recognize each element as the services are performed.

 

- F7 -


Table of Contents

RESMED INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

 

(2)   Summary of Significant Accounting Policies, Continued

 

  (c) Cash and Cash Equivalents

 

Cash equivalents include certificates of deposit and other highly liquid investments and we state them at cost, which approximates market. We consider investments with original maturities of 90 days or less to be cash equivalents for purposes of the consolidated statements of cash flows.

 

Our cash and cash equivalents balance at June 30, 2016, include $291.7 million in cash which is subject to notice periods of up to 90 days. These cash balances earn interest rates above normal term deposit rates otherwise available and are held at highly rated financial institutions.

 

  (d) Inventories

 

We state inventories at the lower of cost (determined principally by the first-in, first-out method) or net realizable value. We include material, labor and manufacturing overhead costs in finished goods and work-in-process inventories. We review and provide for any product obsolescence in our manufacturing and distribution operations by assessing throughout the year individual products and components (based on estimated future usage and sales).

 

  (e) Property, Plant and Equipment

 

We record property, plant and equipment, including rental and demonstration equipment at cost. We compute depreciation expense using the straight-line method over the estimated useful lives of the assets. Useful lives are generally two to ten years except for buildings which are depreciated over an estimated useful life of 40 years and leasehold improvements, which we amortize over the lease term. We charge maintenance and repairs to expense as we incur them.

 

  (f) Intangible Assets

 

We capitalize the registration costs for new patents and amortize the costs over the estimated useful life of the patent, which is generally five years. If a patent is superseded or a product is retired, any unamortized costs are written off immediately.

 

We amortize all of our other intangible assets on a straight-line basis over their estimated useful lives, which range from two to fifteen years. We evaluate the recoverability of intangible assets periodically and take into account events or circumstances that warrant revised estimates of useful lives or that indicate that impairment exists. We have not identified any impairment of intangible assets during any of the periods presented.

 

  (g) Goodwill

 

We conducted our annual review for goodwill impairment during the final quarter of fiscal 2016 using a quantitative assessment. In conducting our review of goodwill impairment, we identified eleven

 

- F8 -


Table of Contents

RESMED INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

 

(2)   Summary of Significant Accounting Policies, Continued

 

reporting units, being components of our operating segment. The fair value for each reporting unit was determined based on estimated discounted cash flows. Our goodwill impairment review involved a two-step process as follows:

 

Step 1-

  Compare the fair value for each reporting unit to its carrying value, including goodwill. For each reporting unit where the carrying value, including goodwill, exceeds the reporting unit’s fair value, move on to step 2. If a reporting unit’s fair value exceeds the carrying value, no further work is performed and no impairment charge is necessary.

Step 2-

  Allocate the fair value of the reporting unit to its identifiable tangible and non-goodwill intangible assets and liabilities. This will derive an implied fair value for the goodwill. Then, compare the implied fair value of the reporting unit’s goodwill with the carrying amount of the reporting unit’s goodwill. If the carrying amount of the reporting unit’s goodwill is greater than the implied fair value of its goodwill, an impairment loss must be recognized for the excess.

 

The results of Step 1 of our annual review indicated that no impaired goodwill exists as the fair value for each reporting unit exceeded its carrying value.

 

  (h) Foreign Currency

 

The consolidated financial statements of our non-U.S. subsidiaries, whose functional currencies are other than the U.S. dollar, are translated into U.S. dollars for financial reporting purposes. We translate assets and liabilities of non-U.S. subsidiaries whose functional currencies are other than the U.S. dollar at period end exchange rates, but translate revenue and expense transactions at average exchange rates for the period. We recognize cumulative translation adjustments as part of comprehensive income, as detailed in the consolidated statements of comprehensive income, and include those adjustments in accumulated other comprehensive income in the consolidated balance sheets until such time the relevant subsidiary is sold or substantially or completely liquidated. We reflect gains and losses on transactions denominated in other than the functional currency of an entity in our results of operations.

 

  (i) Research and Development

 

We record all research and development expenses in the period we incur them.